Send Ex factory date from R3 to APO and populate in PO in APO as start date

Hi ,
Need your expertise in one scenario. SAP IS retail is combined with SAP APO.
1) Purchase Order is ciffed to APO.
2) Based on delivery date in PO in R3....APO calcualated date for distribution demand at source location by taking lead time from tlanes
2) Requirement is to extract 'Ex factory date' from table EXPD in R3 and then send this date to APO.
3) This new date should replace the starting date of PO in APO...in keyfigure Distribution demand at source location.
Could you please suggest the way to do it? Will appreciate your response.
Thank you in advance.

Hi Aparna,
Thanks.
I have also started with purchase order user exit (CIFPUR01 Exit Function Module- Exit_SAPLMEAP_001) at CIF outbound in R3 which will capture the date from table in R3..WIll be sent to APO...APO inbound user exit( APOCF006 ( Functional Module EXIT_/SAPAPO?SAPLCIF_PU_001) will overwrite the date at soucre location in key figure Dist Demadn TLB Confirmed or by chaing date at order level.
Hi Experts,
I think there are two more points....
1) If dates are changed in table ( EXPD) then change pointer will not trigger CIFFIng thsoe changes to APO as the field is not CIF relevant. So it wont be real time integration. Work around can be to set up CIF batch job for PO at regular interval. But I am wondering if we can get some way to make it real time integrationj through CIF. Will appreciate reply on this.
2) Have one more concern and I think its bit crucial to know the answer at this stage ....if date change in key figure Distribution Demand TLB Confirmed figure happens in such a way that lead time between date at soucre and at target doesnot match with available Means of Tranport(MOT) lead times in TLanes then what will happen? WIll it rescheudle the dates as per date at target loctaion to match with lead time in Tlanes or will it not touch it? WIll appreciate reply of experts on this and also on how to achieve this in APO
Thank you.
Best Regards
Nils

Similar Messages

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

How to upload data from excel to SAP and options to be used

How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S

Query Report:To Retrieve Data from A/R Invoice and A/P Invoice

Hii Experts,
I am a new Sap B1 Trainee.I am facing a problem when retrieving data from A/R Invoice and A/P Invoice in order to track
Expenditure and Revenue according to a Bussiness partner,
I am using union to retrieve the information,but it is saying a error that Error Converting Varchar to Numeric and also
i would like to know how can i show the total final payment by reflecting Downpayments in A/R Invoice and A/P Invoice
With Regards
Cherry.

Hii.
My Sap B1 version is 8.8.1 and patch level is 20. Actully i need a scenario where i can able to show both Expenditure and Revenue of a particular bussiness partner and profit/loss in a single query report.
I need some tips regarding this,When i am doing union i am getting conversion error converting varchar to numeric when i take
Sum(Line Total) from OINV and Sum(line total) OPCH group by docdate and docentry and BP .
and another scenario is how to deduct A/P downpayment or A/R downpayment from A/P invoices and A/R invoice to get the final Revenue and Expenditure ..
Thanks & Regards
Cherry

How do I move data from a DAQ into and out of loops and structures?

I have a set of RTD probes set up to read data into LabView through a DAQ. This block of code is in a while loop
that executes alongside of several other loops simultaneously. I need to use the data from the RTD probes in other
loops and case structures specifically for logic tests.
The problem is that I can't seem to bring the dynamic data out of the DAQ containing while loop or into the other structures.
Any ideas?
I have had some success with using multiple DAQs and stopping all others while I need the data inside of a case structure.
Is there a way to reference data from a DAQ or to run multiple DAQs that read the same data from the same channels without getting a "Task in use error"?
Thanks,
-David

Search the forums for Prodcuer/consumer architecture.
This uses queues to pass data from the producer loop (such as your data acquisition loop) to other "consumer" loops. These are the other loops where you want to use the data.
You won't be able to use multiple DAQ Read functions at the same time. As you've seen you get error -50103 about the resources already being in use.

Clean install on new 1TB hdd, Yosemite keeps freezing when copying data from an ext drive and also from a usb

Hi all,
I'm trying to figure out why my macbook keeps freezing when I try to drag my data across to it (even small files from a USB).
I've had to force restart over a dozen times today :/
I ran EtreCheck and there are a couple of issues (I've no idea what they mean).
If anybody could share some light into the report below I would be very grateful:
Problem description:
Macbook Pro mid 2010, Yosemite, blank new install on 1 TB hdd, keeps freezing when copying data from an ext drive and also from a usb
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 4:55 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro7,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 2061 - SN = W013358KQD3BA
Video Information: ℹ️
    NVIDIA GeForce 320M - VRAM: 256 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:7:25
Disk Information: ℹ️
    ST1000LM024 HN-M101MBB disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 999.35 GB (968.00 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS23N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Daemons: ℹ️
    [failed]    com.apple.spirecorder.plist
User Launch Agents: ℹ️
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    Caffeine    Application (/Applications/Caffeine.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        20%    WindowServer
         6%    com.apple.WebKit.WebContent(7)
         4%    Safari
         3%    hidd
         1%    launchd
Top Processes by Memory: ℹ️
    1.07 GB    com.apple.WebKit.WebContent(7)
    439 MB    kernel_task
    90 MB    spindump
    57 MB    mdworker(5)
    57 MB    Safari
Virtual Memory Information: ℹ️
    4.54 GB    Free RAM
    3.46 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 04:47:31 PM    Self test - passed
    May 2, 2015, 01:39:52 PM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-05-02-133952_[redact ed].cpu_resource.diag [Click for details]
    May 2, 2015, 01:23:20 PM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-05-02-132320 _[redacted].crash
Regards
Hoz

Thanks - I had a 1TB hdd in my macbook for about 12 months but it started playing up a few days ago (I got the question mark folder on bootup) so I bought another 1TB hdd (same model) and started from scratch.
My macbook is an early 2010... now I'm wondering if Yosemite is a bit too much for it?
The ext hdd is my timemachine backup, so yes I have used it often and it has my TM backups - and the usb is a new usb which Ive used a few times.
The issue seems to be when Im transferring files from an ext drive to my mac. I can use it fine and browse (worked find for 45 mins) then I tried to bring my data across.. and it copied a few gig over before total freeze.
This has happened about a dozen times.
I keep running disk utility and checking the disk. I also just ran the apple diagnostics tool that came in the apps cd - the hardware apears to be fine.
I have a 250 gb partition for the OS and the rest is my second partition for data.
I'm now wondering if I should reformat the first partition, install leopard from the CD, then upgrade to mavericks and leave it at that.
Any thoughts would be awesome. Thank you for reading and replying!
Hoz

How do I send my BMP info from logic to pedals and keys?

How do I send my BMP info from logic to pedals and keys?
Is it possible to sync my logic bmp with my microkorg so that my korg automatic will sync with the BMP from logic?

I'm not faniliar with the Micro, but logic outputs mtc and midi clock. The serttings are under project settings/synchronization. You'll have to set the Micro to external sync and be sending midi info from your computer to the Micro. Then if you hit play or record in Logic, the micro will chase it.

Porting data from Oracle8i to XML and from XML to Oracle 10g

Hai
I have a client database (using oracle 8i) and a server database (oracle 10g).
Due to lack of leased line connectivity i want to port these offline data from 8i to 10g
using a modem(dial up connection).Is there is any way to port data from 8i to XML
and from XML to 10g.
thanks in advance
dejies

Thanks Nicolas,
As per documentation, it seems to be difficult for export/import from Oracle8i to 10g. Is that any way to achieve this? I have to append the newly imported data with old or exisiting data into Oracle10g.
Regards
Nikhil

Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

Hi i am new to labview
I want to extract data from a text file and display it on the front panel.
How do i proceed??
I have attached a file for your brief idea...
Attachments:
extract.jpg ‏3797 KB

RoopeshV wrote:
Hi,
The below code shows how to read from txt file and display in the perticular fields.
Why have you used waveform?
Regards,
Roopesh
There are so many things wrong with this VI, I'm not even sure where to start.
Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
Not using Read From Spreadsheet File.
Use of local variables to populate an array.
Cannot insert values into an empty array.
What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
Also, how does this answer the poster's question?

AQ or Streams to replicate data from a database table and put it on a queue

If was tasked with the above if I was using AQ I'd think about publishing to queue via insert trigger on a table that's the destination end of a replication.
Given that there's replication involved it sounds like if you want to replicate data from A to B and also push it to a queue you should be thinking Streams with a transform and not just AQ.
However, how do you get Streams to replicate from A to B and at the same time and in the same transaction transform a message and put it on a queue?
Also, if you are to build the message in XML and use an XML payload what do you use to construct the message? PL/SQL by hand? Are there API's in PL/SQL to build a DOM and then stringify the DOM you've built such that everything is entity encoded correctly and the payload can be published to a queue as an XML payload?

Oh yes sorry I lost track of which thread this was. I was thinking Streams but I forgot the original suggestion was to use triggers.
We have many use cases today where data arrives via inserts into some table and a process polls this table and processes the data. This approach does not scale very well. Currently these polling processes are polling the same database that is constantly inserting data as it arrives via multple processes.
I am trying to move away from this approach by introducing queuing. In addition to the above we also have an approach where as the data arrives it's placed on a queue and the process processes these messages asynchonously from the queue. Currently this queue based implementation does not use Oracle. I am trying to move to a solution where if the data must arrive via inserts into a database the processing of the data doesn't necessarily have to be by fetching those records out of the table thru polling. The general idea is that as the messages are inserted they are subsequently enqueued and processed off a queue. There is no desire to have a process which simply polls the database and enqueues what I find in the table. The goal is to remove constant polling of the database.

Taking data from a edit text and placing it in a matrix

Hi all, this is most probably a silly question and simple as pie for everyone on this site, but i just can't get it to work .
Im trying to take data from a edit text and then place it into the matrix.the matrix has been added to the form already. my code looks like this
dataSource = oForm.DataSources.UserDataSources.Add("MyData", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
oColumn = oColumns.Item("ItemC")
oColumn.DataBind.SetBound(True, "", "MyData")
dataSourceED = oEdit.DataSources.UserDataSources.Add("MyDataED", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
oEdit.DataBind.SetBound(True, "", "MydataED")
dataSource.Value = dataSourceED.Value.ToString(oEdit)
oMatrix.AddRow()
Please can someone show me how it should be actualy done because i think the above is totaly wrong.

I thought it was wrong Alexey Grebennikov because it wasn't doing anything. I original said
If (FormUID = "UidFrm") Then
If (pVal.Before_Action = False) Then
If (pVal.ItemUID = "Add") And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED) Then
AddToMatrix()
end if
end if
end if
then in AddMatrix() it had the code listed before,it was in a try block but i was not diplsying the error in the catch part,my bad/fault but i've added it to a try block with it displaying the error in the catch block and i'm getting the error
"Object Variable or block variable not set" when it gets to the line
dataSourceED = oEdit.DataSources.UserDataSources.Add("MyDataED", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
any ideas what this error means, if i know that i think it will then work.
Thank you to both of you Auzillaud Antoine and Alexey Grebennikov for helping. Auzillaud Antoine i tried loadfromdatasource and the other code but it obviously picks up the error before getting to the code you supplied. If i can figure out the error i'm sure it will all work.
So please, any ideas why i get the error
"Object Variable or block variable not set"

How to store data from textfile to vector and delete a selected row.

Can someone teach me how to store data from textfile to vector and delete a selected row. And after deleting, i want to write the changes in my textfile.
Do someone has an idea? :)

nemesisjava wrote:
Can someone teach me how to store data from textfile to vector and delete a selected row. And after deleting, i want to write the changes in my textfile.
Do someone has an idea? :)What's the problem? What have you done so far? What failed?
What you described should be pretty easy to do.

Getting Data from 2 different table and saving it in the third table

Hi,
My question is i have 2 different table where the data is stored. And Nothing is at Level0 and i don't need it.
Table A will be at Level1, this is a scroll and depending on this value the level2 grid will be populated with the values.
Say for example Table A is groups; data e.g., Cars, MotorBike etc
Table B will have the data for Group Cars: Holden, Toyota, Honda etc., MotorBike: Honda, Suzuki, Yamaha etc.,
Now lets say there are 3 divisions in the company AA , BB
Division AA has been allocated group Cars only
Division BB has been Allocated Both Cars and MotorBikes.
To do this i have used a query view where depending on the Division i choose the group and then i get the required fileds.
Now my Problem is that i need to save this data in table C but on the ad-hoc basis can't write a query with in the code to do that.
tried using work record on the scroll but i cant do that as well. Any Suggestions?
One more thing when the Page open this data should be pre-populated on the page depending on the division, the user will not be able to select anything from the prompt.
Edited by: 952330 on Aug 12, 2012 8:32 PM

I hope I can clarify:
For our purposes here:
Table 1 = "Step 2 - Product Sizes"
Table 2 = "Option id Master"
Table 3 = "Export - Product Info"
Table 1:
The user would enter values for "productcode," "Horz," and "Vert"
"Size" would auto fill based on values in Horiz and Vert (I have this taken care of already).
Table 2: This is a completely static table that I want to search against. - Data from other tables in the doc does not alter or change the data in this doc.
We just want to look at table 2. Find the existing value in "table 2 : size" column that matches the "table 1 : size" column and then pull the "optionids" and "productprice" from that row.
Can the value from "Table 1 : Size" be used as a search term in "Table 2 : Size?"
Table 3: The user does not enter any values on this table.
"productcode" is pulled from table 1 - "Table 1 :: A5" = "Table 3 :: A5"
"optionids" and "productprice" are pulled from Table 2 columns "D" and "E" - however we do not know which Table 2 row it is pulling from until we enter data in Table 1.
As I'm writing this I'm realizing that
A. this is probably really confusing to you.
B. this may be impossible inside of numbers.
If you have some other method that would facilitate the same out come but be structured differently please let me know.
--- maybe to help you understand further what I am doing here is my current workflow:
I record the size of a piece of art.
Then I manually go to my "Option id Master" and find the same size.
I then copy the corresponding "optionids" and "productprice" cells. (these options control the prices displayed on my website)
I got to my "Export - Product Info" table and paste the values in the corresponding cells.
I was hoping to automate this as it takes a long time when you have hundreds of products.
Thanks for the help!

How to extract data from SAP 4.7 and upload data to SAP ECC 6.0

Hi,
How to extract data from SAP 4.7 and upload data to SAP ECC 6.0? Can i use BDC,BAPI,LSMW? Help me please.

hi
good
both works not possible simultaneously.
If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
thanks
mrutyun^

Error when extracting data from ETL - Missing messages and missing InfoIdoc

Hi All,
We are using BW 3.0 and extracting data from other source systems through Informatica Powercenter (ETL). The system is working fine but when we try to extract data on 31st Dec , we get the following error. Only this load gives the error and all the other load to other data targets are going fine. All the data are one-to-one mapped from ETL to BW.
Error messages from Monitor -Status tab:-
   "InfoIdocs missing; external system
   Diagnosis :- InfoIDocs are missing. The IDocs are created in BW with non-SAP systems as source
   systems that transfer the data and metadata to BW using BAPIs. Since the IDocs are missing, a
   short dump in BW probably occurred.
   System response: No selection information arrived from the source system"
Error messages from Monitor -Details tab:-
    Missing message: Number of sent records,   Missing message: Selection completed
Highly appretiate your suggestions.
Vinod.CH

Hi Rathy Moorthy,
Thank you very much for your reply. The source system connections are OK and we are able to load data to other Data targets from ETL, we have issue only with this this particular load. The load extracts data and I have loaded the data from ETL to PSA and have checked the data content and it is correct. But when I update the same data to the target I get this error. I have also tried to update from PSA to target and also directly from ETL to target.
Appretiate your suggestions.

Send Ex factory date from R3 to APO and populate in PO in APO as start date

Similar Messages

Maybe you are looking for