Send HU structure to an external system through an idoc

Hi,
I need to send the description of an HU (Sub HUs and materials to an external system).
Do you know if there is any standard idoc type allowing to do that.
I tried to use idoc HU_CREATE or HU_PROCESSOUTPUTDIRECT but I think none of them will allow me to do that because there is no function module in outbound mode that I can use with them/
Any ideas?
Thanks in advance.
Regards

Hi,
In order to send data to external system and if you have an middleware used in your landscape then
create logical system for that system and associate the port with RFC destination (based on middleware used type 3 ot type t) can be used and idoc can be sent to middleware and middleware can take care of sending the data to the external system by converting it into required format..
These are normal scenarios for which Middlewares are used for integration..
HTH
Rajesh

Similar Messages

Send R/3 data to external system

Hi Guru's,
how to send R/3 data to external system (Oracle databse).
thanks in advance.
Ramu.

Refer to this link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0cc5049-5837-2b10-8ca5-f0e948762522
it is a very good document on IDOCs
or you may search for this in
sapbrain.com or
thespot4sap
or even within SDN you may search for IDOCs you will get lots of info
Regards,
Anil

Unable to send mails to outlook from sap system through workflow

Hi ,
Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
Please find the errors belows that traced from sost t code
02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
Regards
RAGHAVENADAR

Hello,
Actually i checked the mail ID for WF-BATCH using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
ABAPer is sending mails through work flow.
Regards
RAGHAVENDAR M

Send BP changedOn date to external system

Hi CRM Technical Experts,
I am using bapi crmxif_partner_save_m01 to send create and change of BP to external system as Idoc. I also need to send changed on date and user id, if changes are made to bp. but I could't find appropriate fields in bapi. Idoc contains only create date and time.
Is there anything with bdoc to send or how is it works.

hi
Mehar
We need to customize the settings in Middleware for data integration between CRM and a external system
this can be done through XIF adapter
please navigate through IMG as follows..
IMG --> Customer Relationship Managment --> CRM Middleware and Related Components --> Exchanging Data with External Components --> XIF Adapter Setup --> Outbound/Inbound Direction
hope it clarifies
Venu

Send production order changes to external system IDOC

Hi,
I need to send production order changes to an an external system. I understand that I can trigger idocs using t-code POIT.
but my requirement is when a order is changed, i want to trigger an IDOC to external system with the new PO data...how can I achieve this

Hi Swathi,
A very high level idea.
You can use the user exit..."LXCO1U06" and call the transaction POIT in back goround and submit the idoc. This exit is used @ save of TA code CO02. Moreover as the production order can be changed through several transactions like COHV, CO40, COOIS etc....you have to check whether this exit would be applicable for all transaction.
Regards,
Chinna

Problem while sending HL7 ACK to HL7 external system

Hello,
I am facing a problem with GlassFish ESB.
The product version indicated in the IDE is: NetBeans IDE 6.1 (Build 200810140114). I have not yet tested the current version.
My problem is as follow:
- I have 2 service assemblies, one is File BC > HL7 BC and the other HL7 BC > BPEL with Database WSDL as partners.
- It seems everything is doing OK. The HL7 file is read by File BC, then sent to HL7 BC, retrieved by the second HL7 BC, fed to the BPEL, and finally queries are executed. Then an ACK message is generated and an error occurs. Here is the stacktrace:
HL7BC-I0155: Sent HL7 request to HL7 External System :MSH
EVN|A01|2008090801529|||JavaCAPS6^^^^^^^USERS
PID|1||A000010^^^HosA^MR^HosA||Noseda^Arthur^^^^^||19460101123045|M|||7 South 3rd Circle^^Downham Market^England - Norfolk^30828^UK^||||||||A2008090801529
PV1|1|I|^^^|I|||FUL^Fulde^Gordian^^^^^^^^^^MAIN|||EMR|||||||||V2008090801529^^^^VISIT|||||||||||||||||||||||||2008090801529
HL7BC-I0117: Received a message in HL7 binding 68899546013632-10229-134707429449130110
HL7BC-I0137: Pattern for message exchange ID 68899546013632-10229-134707429449130110 is http://www.w3.org/2004/08/wsdl/in-only
HL7BC-I0135: Constructing the ACK message with version ID HL7v231
HL7BC-I0162: Creating ACK Builder object of class com.sun.jbi.hl7bc.extservice.ack.HL7v231ACKBuilder
HL7BC-I0136: Constructed ACK message to be send to the sender MSH
MSA|AA|CTLID_2008090801529
HL7BC-I0129: Sending ACK back to the sender
HL7BC-I0141: MLLPEncoder.setStartBlockChar():Value is set as : (in decimal ascii).
HL7BC-I0143: MLLPEncoder.setEndDataChar():Value is set as : (in decimal ascii).
HL7BC-I0142: MLLPEncoder.setEndBlockChar():Value is set as :
(in decimal ascii).
HL7BC-I0144: MLLPDecoder.setStartBlockChar(): Value is set as : (in decimal ascii).
HL7BC-I0146: MLLPDecoder.setEndDataChar(): Value is set as : (in decimal ascii).
HL7BC-I0145: MLLPDecoder.setEndBlockChar(): Value is set as :
(in decimal ascii).
HL7BC-I0160: Sending HL7 message acknowledgement to HL7 External System :MSH
MSA|AA|CTLID_2008090801529
ERREUR : 'HL7ENC-E0027: Element: MSH.11 must occur at least 1 time(s)'
HL7BC-W0126: Unable to decode the message due to error=[javax.xml.transform.TransformerException: org.xml.sax.SAXParseException: HL7ENC-E0027: Element: MSH.11 must occur at least 1 time(s)]
ERREUR : 'HL7ENC-E0027: Element: MSH.11 must occur at least 1 time(s)'
HL7BC-E0209: Failed to process the message exchange with ID 68899546013632-10229-134707429439760109 and exchange pattern http://www.w3.org/2004/08/wsdl/in-only due to error: HL7BC-W0121: Unable to process message exchange 68899546013632-10229-134707429439760109, end point com.sun.jbi.hl7bc.EndpointImpl@8cce44 and operation {http://j2ee.netbeans.org/wsdl/HL7v22_Feeder_CA/HL7v22_Feeder_CA_HL7_ANY_HL7Out}hl7wsdlOperation.
java.lang.Exception: HL7BC-W0121: Unable to process message exchange 68899546013632-10229-134707429439760109, end point com.sun.jbi.hl7bc.EndpointImpl@8cce44 and operation {http://j2ee.netbeans.org/wsdl/HL7v22_Feeder_CA/HL7v22_Feeder_CA_HL7_ANY_HL7Out}hl7wsdlOperation.
        at com.sun.jbi.hl7bc.OutboundMessageProcessor.processOneWayOutbound(OutboundMessageProcessor.java:851)
        at com.sun.jbi.hl7bc.OutboundMessageProcessor.processMessage(OutboundMessageProcessor.java:301)
        at com.sun.jbi.hl7bc.OutboundAction.run(OutboundAction.java:66)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
        at java.lang.Thread.run(Thread.java:619)
Caused by: javax.xml.transform.TransformerException: org.xml.sax.SAXParseException: HL7ENC-E0027: Element: MSH.11 must occur at least 1 time(s)
        at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:720)
        at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:313)
        at com.sun.jbi.hl7bc.util.XmlUtil.transformToDOMResult(XmlUtil.java:268)
        at com.sun.jbi.hl7bc.OutboundMessageProcessor.getDOMResult(OutboundMessageProcessor.java:2187)
        at com.sun.jbi.hl7bc.OutboundMessageProcessor.start2WayChannelWithExtSystem(OutboundMessageProcessor.java:1723)
        at com.sun.jbi.hl7bc.OutboundMessageProcessor.processOneWayOutbound(OutboundMessageProcessor.java:825)
        ... 5 more
Caused by: org.xml.sax.SAXParseException: HL7ENC-E0027: Element: MSH.11 must occur at least 1 time(s)
        at com.sun.encoder.hl7.runtime.provider.UnmarshalAdaptor.throwException(UnmarshalAdaptor.java:1181)
        at com.sun.encoder.hl7.runtime.provider.UnmarshalAdaptor.parsePseudoGroup(UnmarshalAdaptor.java:771)
        at com.sun.encoder.hl7.runtime.provider.UnmarshalAdaptor.parseFieldCompSubcomp(UnmarshalAdaptor.java:490)
        at com.sun.encoder.hl7.runtime.provider.UnmarshalAdaptor.parseParticle(UnmarshalAdaptor.java:340)
        at com.sun.encoder.hl7.runtime.provider.UnmarshalAdaptor.parseSequence(UnmarshalAdaptor.java:571)
        at com.sun.encoder.hl7.runtime.provider.UnmarshalAdaptor.parseParticle(UnmarshalAdaptor.java:351)
        at com.sun.encoder.hl7.runtime.provider.UnmarshalAdaptor.parseSegmentOrPseudo(UnmarshalAdaptor.java:532)
        at com.sun.encoder.hl7.runtime.provider.UnmarshalAdaptor.parseParticle(UnmarshalAdaptor.java:342)
        at com.sun.encoder.hl7.runtime.provider.UnmarshalAdaptor.parseSequence(UnmarshalAdaptor.java:571)
        at com.sun.encoder.hl7.runtime.provider.UnmarshalAdaptor.parseParticle(UnmarshalAdaptor.java:351)
        at com.sun.encoder.hl7.runtime.provider.UnmarshalAdaptor.parse(UnmarshalAdaptor.java:306)
        at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transformIdentity(TransformerImpl.java:637)
        at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:708)
        ... 10 more
Accepted the message in DBBC Binding.
HL7BC-I0139: Set message exchange status to ERROR for message exchange ID 68899546013632-10229-134707429439760109 and exchange pattern http://www.w3.org/2004/08/wsdl/in-only
FILEBC-W00708: One-Way Inbound MessageExchange for service: {HL7v22_Feeder_CA}casaService1, endpoint: casaPort1, operation: {http://j2ee.netbeans.org/wsdl/HL7v22_Feeder_CA/HL7v22_Feeder_CA_HL7_ANY_HL7Out}hl7wsdlOperation, was returned with status=ERROR. If Re-delivery is configured, message will be re-sent.
FILEBC-E00767: Provider for service [{HL7v22_Feeder_CA}casaService1] endpoint [casaPort1] responded with an error status. Error detail is: HL7BC-W0121: Unable to process message exchange 68899546013632-10229-134707429439760109, end point com.sun.jbi.hl7bc.EndpointImpl@8cce44 and operation {http://j2ee.netbeans.org/wsdl/HL7v22_Feeder_CA/HL7v22_Feeder_CA_HL7_ANY_HL7Out}hl7wsdlOperation.I wonder if the MEP could be the reason. I think I chose in-only, and for the ACK to be sent, it could be necessary to go for in-out. Yet, what's puzzling me is the error message: MSH.11 must occur at least 1 time(s). Could it be that the ACK is badly generated? In the input (ADT) HL7 this field is populated with a P.

Sadly, the reason was nothing but the Oracle JDBC driver. While it was correctly working as far as NetBeans is concerned, it was not for GlassFish. Hence, with the bubbling up exception mechanism, the stacktrace I got. Problem solved, but nasty error message.
Thanks anyway.

Extract data from SAP and send to external system via Webmethods & IDOC's

Hi,
We need to Extract data from SAP and send to an external system via Webmethods middlewear using IDOCs. I have never used webmethods before and would like to know more about how to implement this scenario. I have used IDOCS in an EDI scenario before but not used it along with WebMethods.
Any pointers would be of great help. Thanks

If you have already ABAP programs /BAPI's in place then try to develop RFC interface and write some back ground programs to scheudl BAPI's and develop scenario but you need to implement error handling , data validation in PI mapping level.
or
take help from ABAPer to design in ABAP like writing Proxy program to pull data and send it PI.
if you are dealing with master data bit risky(correctness) but can be achived using PI.

Sending order data to an external system using scp sftp (osm 631.221)

Hello There,
I need to come up with a means of sending some order data to an external system via SCP or SFTP.
I was looking at an automated task that would fire off some Java to package the data, create the file and send it.
I then have to write another automated task that will block the order and check the file system for a return file and then update the order with the data from the file.
Does any one have ideas on the best / recommended approach to achieve this ?
I am obliged :-( to send and receive the file via SCP/SFTP.
any help would be appreciated.
Jim

Hi Jim;
Using a custom Java automation plugin is the right place to start to tackle the problem. There are several Java libraries that you could consider. Apache Commons VFS (http://commons.apache.org/vfs/index.html) supports both SCP and SFTP and insulates you from having to deal with the specifics of either so you may want to start there.
As for the problem of getting a response, given that there is no notification type capability with those type of file systems, you will have no choice but to poll to check if the file exists. Not pretty, but so long as you are not dealing with very high volumes it should work ok. You can model the polling as a subprocess consisting of two tasks. Task A is implemented by a custom automation plugin using VFS or similar to go and check if the file exists, and if it does download it. If the file exists and is downloaded successfully then the task completes with a success status. If the file does not exist then it completes with a retry status. The retry status is mapped to a delay rule task - and the delay rule task simply waits for some interval (e.g. 1 minute) after which it completes and loops back to Task A.
Hope this helps,
Brian.

Addition data send in XML po to external system In SRM 7

Hi Expert
How we can add/ Modify data for XML PO Which sending for external system Via PI .
we need to add additional data to the XI system in XML format in PO . How we can add the code to this.
One more issue is like we are not able to debug the BADI BBP_SAPXML1_OUT_BADI.
Request to reply for this

Hello sharad,
Please find the sample coding.
METHOD if_ex_bbp_sapxml1_out_badi~purchaseorder.
DATA: l_str(40) TYPE c,
        ls_partner TYPE bbps_pdext_partner,
        ls_item TYPE bbps_pdext_po_item_d,
        ls_proxyitem TYPE bbpx1_purchase_order_item,
        ls_partner_item TYPE bbpx1_po_ship_to_location,
        ls_fdspartner TYPE bbpx1_po_ship_to_location,
        ls_telephone TYPE bbpx1_address_telephone,
        ls_check TYPE BBPX1_ADDRESS,
        ls_fax TYPE bbpx1_address_facsimile,
        ls_email TYPE bbpx1_address_email,
        l_index TYPE i,
       lt_table TYPE TABLE OF ztest_db,
       ls_table TYPE ztest_db,
        l_flag TYPE c,
        ls_dfkkbptaxnum TYPE dfkkbptaxnum,
        lt_telephone     TYPE bbpx1_address_telephone_tab,
         lt_check                TYPE BBPX1_ADDRESS,
        lt_email       TYPE bbpx1_address_email_tab,
        lt_name        TYPE bbpx1_person_name,
        ls_name         TYPE bbpx1_person_name,
        lt_street       TYPE bbpx1_address_physical_address,
        ls_street       TYPE bbpx1_purchase_order_party,
        ls_details        TYPE bbpx1_purchase_order_item,
        lt_ship        TYPE BBPX1_PO_SHIP_TO_LOCATION,
        ls_ship        TYPE bbpx1_po_ship_to_location.
LOOP AT cs_purchase_order_message-purchase_order-item INTO ls_proxyitem.
    l_index = l_index + 1.
    LOOP AT it_item INTO ls_item WHERE number_int = ls_proxyitem-id-value.
      LOOP AT it_partner INTO ls_partner WHERE p_guid = ls_item-guid.
        IF ls_partner-partner_fct = '00000712'.
          ls_proxyitem-zzxyz = ls_partner-zzxyz.
         ls_proxyitem-zzxyz = 'Test'.
          ls_fdspartner-buyer_id = ls_partner-partner_id.
         concatenate ls_partner-NAME ls_partner-NAME_2 into l_str separated by space.
          APPEND ls_partner-name TO ls_fdspartner-address-organisation_formatted_name.
          APPEND ls_partner-name_2 TO ls_fdspartner-address-organisation_formatted_name.
         ls_fdspartner-ADDRESS-ORGANISATION_FORMATTED_NAME = l_str.
          ls_fdspartner-address-physical_address-country_code = ls_partner-country.
          ls_fdspartner-address-physical_address-region_code-list_id = ls_partner-region.
          ls_fdspartner-address-physical_address-street_postal_code = ls_partner-postl_cod1.
          ls_fdspartner-address-physical_address-city_name = ls_partner-city.
          ls_fdspartner-address-physical_address-street_name = ls_partner-street.
          ls_fdspartner-address-physical_address-care_of_name = ls_partner-c_o_name.
          ls_fdspartner-address-physical_address-district_name = ls_partner-district.
*-- Populate telephone number
          ls_telephone-number-subscriber_id = ls_partner-tel1_numbr.
          ls_telephone-number_default_indicator = 'true'.
          ls_telephone-number_usage_denial_indicator = 'false'.
          APPEND ls_telephone TO ls_fdspartner-address-communication-telephone.
*-- Get Fax details
          ls_fax-number-subscriber_id = ls_partner-fax_number.
          ls_fax-number_default_indicator = 'true'.
          ls_fax-number_usage_denial_indicator = 'false'.
          APPEND ls_fax TO ls_fdspartner-address-communication-facsimile.
*-- Get Email details
          ls_email-address-value = ls_partner-e_mail.
          ls_email-address_default_indicator = 'true'.
          ls_email-address_usage_denial_indicator = 'false'.
          APPEND ls_email TO ls_fdspartner-address-communication-email.
          ls_proxyitem-zfinal_destination = ls_fdspartner.
          MODIFY cs_purchase_order_message-purchase_order-item INDEX l_index FROM ls_proxyitem.
          CLEAR ls_fdspartner.
        ENDIF.
        IF ls_partner-partner_fct = '00000027'.
          ls_proxyitem-zzcxyz = ls_partner-zzcxyz.
          MODIFY cs_purchase_order_message-purchase_order-item INDEX l_index FROM ls_proxyitem.
          l_flag = 'X'.
        ENDIF.
      ENDLOOP.
      IF l_flag IS INITIAL.
        READ TABLE it_partner INTO ls_partner WITH KEY partner_fct = '00000027'.
        IF sy-subrc = 0.
          ls_proxyitem-zzclxyz = ls_partner-zzclxyz. " custom field
          MODIFY cs_purchase_order_message-purchase_order-item INDEX l_index FROM ls_proxyitem.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDLOOP.
ENDMETHOD.
Edited by: S Neelima on Apr 14, 2011 11:17 AM

Which idoc type allows to send plant/sloc info to external system?LOISM001?

Dear EDI Experts,
we are looking for a solution for the following issue:
An external system (Mobile solution) shall get plant/stock info from SAP ERP.
Process:
1.Plant/Slocation is NOT empty, e.g. Material 1100 -> 100 PC
2. Stock is posted to Pant/Sloc, e.g. Material 1110 -> 50 PC + Mat. 1200 -> 80 PC
For the stock movement idocs can be generated BUT we need ALL stock of Plant/Sloc in idoc
-> 100 PC of 1100
-> 50 PC of 1110
-> 80 PC of 1200
As far as I know NO standard IDOC type exists which offers to transfer such info.
I came across the LOISM001 (to be triggered via transaction POIT) idoc which may meet the requirments. BUT it creates an idoc per material.
Questions:
1. LOISM001: Is there any chance to combine all materials of a plant/storage location to ONE idoc?
2. Any other idoc type suitable and how to trigger automatically?
Many thanks
Regards
JW
Edited by: Jens Wolf on Jul 1, 2008 3:34 PM

Hi !
You may check out the PROACT01.
It's designed to transmit stock data.
Hope that helped a bit.
Rainer

Transfer article master from SAP R/3 To External Systems(Futura) Using IDOC

Dear Experts
Please let me know how to Transfer article master from SAP R/3 To External Systems(Futura) or text file Using IDOCs.
thanks

Hello,
Since you want to transfer Article Master, it should be a Retail System. So you should use Message Type ARTMAS. For fullbuild, you can use transaction WDBM and for changes, you can use WDBU. For changes, you can enable change pointers for required fields using BD64.
Thanks,
Venu

How to send price condition changes to external system

Hi all,
By using trans: VK11/VK12 we may add and change pricing conditions for a particular condition type.
We want to send to PI changes beeing made (for amount, date interval, e.t.c...). Our condition type is ZPRB, involving the following table to be changed: A090, A662, A677, A663 (in addition to KONH/KONP).
We thought we could program changes/insertions in the process to a new table refering the changes, and use a proxy call to be triggered upon this table, but unfortunately these transactions (VK11/VK12) does not contain any User Exit. So we have to make changes to the standard SAP if we go for that solution.
My question is therefor: Is there a better way of transferring the price changes made by these transactions (ALE/Changepointer, BAPI, IDOC, e.t.c...).
Please advice and describe what is the best solution?
Best regards
Leif Lohne.

Good idea. Doing this exposed 2 problems:
1 - First problem: The program changes in the midi file work from logic, but not when the midi file is played from a Mainstage external instrument channel strip. So it seems that Mainstage is stripping out the program changes. (Any note play information in the midifile is played from Mainstage, but not the program changes.)
2 - Second Problem: The sys ex event instruction (I typed in manually in the event editor in logic) to change performance modes on the external keyboard is not working from logic either... So I must be doing something wrong? I have to create the sys ex event manually, since the external keyboards I'm using don't transmit mode changes for me to record into a midifile. In this case, I'm using a Yamaha S90ES, and manually created the sys ex event in logic for mode change to Voice:
Yamaha S909ES Voice mode: $F0 $43 $11 $7F $01 $0A $00 $01 $00 -$F7+
However, the mode does not change when the file is play back from logic...
Sure appreciate your help...

Send routings to external system using ALE

Hey guys,
I am using ECC 6.0. Under tools->ALE->Master Data Distibution-> Logisitcs-> Bill of Material -> Routings i tried to send a routing to an external system which is already setup for many other types of master data. I get the error "Transaction code /SAPMP/SEROU cannot be executed" . I do not know how to fix it.
I also tried using transaction POIM but did not understand how to send the BOM along with routings and work centers in that T-code. I am able to send materials through that screen successfully but nothing else. If someone could help me out I would appreciate it.
Thanks in Advance.

AN issue regarding " Long Texts "(texts in accounting document).
1) Am using RFBIBL00( Direct Input method ) to transfer Accounting Documents.
2) I need to Update "Texts" both Header & line item for accounting document using Direct input method.
3)I tried to append a custom 'Z' include, that calls SAVE_TEXT function module, in program RFBIBL00 to save texts for the respective Accounting document.But the performance is very low.
4)If I use direct input program /SAPDMC/SAP_LSMW_IMPORT_TEXTS or /SAPDMC/SAP_LSMW_SXDA_TEXTS how will it save texts to document, before it is created , since we are still in LSMW that just generates .CONV file , but it might not create account document number, once the .Conv file goes to RFBIBL00, account document gets generated .
5)another major issue am encountering is , if one of a document fails (error) how about updating texts.How i send text to BDC in this case.
My queries are :
a) Is there any other way to update texts using Direct input method ?
b)Can I integrate, direct input program RSTXLITF with RFBIBL00, is that feasible, will i be able to save texts with out any performance issues ?
I would really appreciate if am given some suggestions or solutions for the above case.
Thanks alot in Advance !

Sending IDOC creditor data to an external System

Hello,
I have a scenario where I send the creditor data from SAP to non-SAP System.
For SAP System as a target I can use the TA BD14 to do this. This is working fine. But this is not my case, I need to send on non-SAP System.
So what is the right solution for sending to an external non-SAP System? With BD14 I can only send to logical system what for me is only SAP System (right?). My workaround solution is to maintain the external non-SAP System also as logical system und choose the port as Data-Port (data will be saved on file system). Is it the best solution or there are more better known?
Where can I obtain more knowledge on intergration of external non-SAP Systems? The documentation that I have covers in 95% the issue of SAP Systems. Intergration of non-SAP Systems (or sending data to non-SAP Systems) ist more difficult as I see.
Thank you in advance. Best regards.
Michael
Edited by: Michael Swistowski on Mar 15, 2011 12:52 PM
Edited by: Michael Swistowski on Mar 15, 2011 12:53 PM
Edited by: Michael Swistowski on Mar 15, 2011 12:53 PM

Hi,
In order to send data to external system and if you have an middleware used in your landscape then
create logical system for that system and associate the port with RFC destination (based on middleware used type 3 ot type t) can be used and idoc can be sent to middleware and middleware can take care of sending the data to the external system by converting it into required format..
These are normal scenarios for which Middlewares are used for integration..
HTH
Rajesh

How to send an event to external system?

Hi
I am facing problem in sending the event to an external system.
Initially I created 2 workflows with different itemtypes. One has send event and other has receive event. This works perfectly when I use the WF_OUT and WF_IN agents of the same system.
Now, I signup two workflow server ( running in two PC, on Oracle 8.1.7 ). I have followed the following steps.
a. creating database links.
b. Signing up the system.
c. changing the system status to enabled in Global Preference Page.
In the event subcription in System1 is local, Out agent is Wf_OUT of System1 and the TO Agent is Wf_IN of System2. There is external subscription for the same event in System2 without Agents.
When I run the workflow with send event, the event message goes to WF_OUT agent with the status Ready, but never propogates.
What could be the reason? Can anyone help me?
Thanks a lot.

Hi
Thanks for immediate respose. I tried the ping/acknowledgement example in the biginning itself. It doesn't work. I also tried by changing the agents ( to respective values suitable for my systems) of that example. Then also it failed. The error in that case also same. The message will not propogate from the out going agent.

Send HU structure to an external system through an idoc

Similar Messages

Maybe you are looking for