Send material master with classifications (ALE)

Hi,
I want to send material master data with its classifications. I am using transaction 'BD10' to send materials. I understood that in order to send the classifications I have to check the ckeckbox 'Send material in full' - I did it, and there are no classifications in the IDoc.
  please advise,
    Thanks, Nir.

You can use change pointer mechanism. This is nothing but, when you change a material SAP Coded in such a way, if that specific field is marked for Change Document then an entry can be entered in TBDCP table.
(you can find this by going to SE11 put the table name MARA, display the table. Specific field like MATNR double click on the data element and go to Further Characteristics tab, there you can see whether it is marked for change document or not)
After this, you have to activate the change pointers for the system using BD50 transaction.
Then in transaction BD52 you have to maintain what fields are relavent for the change pointers in the IDoc. This is the deciding factor. If your IDoc field is mentioned in this table, then whenever a material is created or changed SAP will make an entry into TBDCP table.
Then you have to run BD21 transaction as a batch job for that specific message type to pick up the changes and create idocs. (That means BD21 program will select the data from TBDCP table and creates IDocs)
CHANGE POINTERS IS A BATCH PROCESS.
regards
SKM

Similar Messages

  • IDOC for sending material data including classification data?

    Hi everyone,
    I'm just looking for an IDOC to send to an external system all data of certain materials but including classification system data, variant configuration data...
    I have checked MATMAS0x but I am not sure if those IDOCs match with my requirement.
    I would be very grateful if someone could please help me.
    Thanks in advance and best regards,
    Ben

    Hi Ben
    Kindly follows the below steps and trasaction screens, I believe you will be able to send the mat data incl. classification data to other external system through IDOC.
    Steps:
    Create material master record in SAP
    Enter T.Code BD10 to  send material master data from SAP to 3rd Party Logistics Provider
    Enter Material,Logical System and click Execute(F8)
    Press ENTER to continue
    Press ENTER to continue
    Enter T.Code WE09 to check the status and content of the Idoc created
    Enter Idoc Segment name in Search in Segment, Field name in Search in Field, Material No in "for Value" and press F8 to execute
    Double click on the Idoc number to check the content and status of the Idoc
    Expand the Status records to check the STATUS of the Idoc
    To check the fields in the Idoc, expand Data records and check the Mandatory fields in each Segment
    Transaction Screens:
    Transaction / Screen
    MM01
    BD10
    BD10 Screen
    BD10 Screen
    BD10 Screen
    WE09
    WE09 Screen
    WE09 Screen
    WE09 Screen
    WE09 Screen
    Expected Result:
    Expected Result
    Material Master Record Created
    Send Material Screen appears
    A popup window appears with a message "1 master Idoc(s) set up for message type MATMAS"
    A popup window appears with a message "1 Communication Idoc(s) generated for message type MATMAS"
    Send Material Screen appears
    Idoc Search for Business Content screen appears
    Idoc corresponding to the material no is displayed
    Idoc along with the 3 records(Control Record,Data Record,Status Record) appers
    Final STATUS should be 03(Data passed to port OK)
    All Mandatory fields must be populated with correct data
    If it is useful reward points
    Thanks
    Saravana

  • Material  Creation with Classification Data

    Hi friends,
    I am technical guy,
    I need to know how to create material(MM01)  with classification data,
    if i want fetch data , where i will find that data ( means which tables).
    Thanks in Advance,
    regards,
    Bhaksar

    HI Bhaskar,
    I will explain you a scenario, where you will be able to understand the relation.
    Consider i am manufacturing a two wheeler, which has the material number but with various colours say Red and Blue.
    In this case during my SD process, in the sales order, i need to mention the material number also with the colour as Red in the batch field in order to make the process more specific.
    In order to cater this need, i need to activate batch managment for that material in the purchasing view and also opening the classification view in the Material master with the batch class as 001 _ Material Class.
    Now my work will not get completed without maintaining a batch master for the same. Ie i have to ensure a batchmaster for the material using tcode MSC1N, with batch as colour, Material code, Plant and storage location also if split valuation is activated, we need to mention the valuation type too.
    Hope i had thrown some lights over the topic enquired.
    Regards,
    RitiG

  • Report For list of material Master with PO text

    Hi all,
    I need a report whether it is available in Standard SAP or a customized, for List of Material Master with their PO text.
    If any one can help, please reply to this theard.
    Regards,
    Kapil Kulkarni

    To get the material number combined with the PO text you will need the help of an ABAP programmer.  The programmer can create a report for you using the function module READ_TEXT in the function group STXD.  The tables to use are:
    STXH - STXD SAPscript text file header
    STXL - STXD SAPscript text file lines
    The selection screen should have at least the following:
    OBJECT - STXH-TDOBJECT
    NAME - STXH-TDNAME
    LANGUAGE - STXH-TDSPRAS
    TEXTID - STXH-TDID
    You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header.  For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST.  You can use this program to get long text in lots of places like information records, purchase order texts, etc.
    Hope this helps.

  • How to create a material master with referrence to exsisting material maste

    hi experts
    how to create the material master with reference to an existing material master ?
    please explain in steps
    regards
    jai

    Dear,
    It is very simple.
    Enter  MM01 t-code.
    Enter your existing material code in field of reference material code.
    If your material number range is external number range then enter number of material otherwise direct enter industry sector and material type.
    After enter basic detail system ask you plant/storage location detail and view detail.
    Select reference plant and storage location in left sight of diglog and enter plant and storage location in right sight of diglog screen for which you want to maintain material master.
    Then click on all view, If you want to change some detail change it.
    Due to reference material all detail is come from reference material.
    Then click on save.
    NOTE: - You can create new material with reference of old material but it is prerequest material type should be same of both material old and new.
    Regards,
    Mahesh Wagh

  • Mandatory in material master with material type wise

    Dear all
    Is it possible to make a field mandatory in material master with material type wise?
    kindly help

    Hi
    See the below config
    Check in OMS2 for your material type for "field reference". then
    Spro>logistics general>Material master-->field selection.
    Here you need to group required fields under one field selection group. then in Maintain field slection for data screen, you can make Field group madatory for the field reference (material type)
    If required take help from MM consultant
    Regards
    Antony

  • I want validation while creating material master with profit center

    Dear Experts,
                           I want validation while creating material master with profit center.
    If 0001 plant having 100100 profit center
       0002 plant having  200200 profit center
    Material A cant be created for 0001 plant for with wrong profit center 200200.
    Kindly help & provide me solution clearly

    Hi,
    Profit centers are assigned to controlling areas. And controlling areas can have many plants under them. So as long as both the plants and profit centers are in the same controlling area users will be able to extend the materials.
    You should put in your validation control in the material master user exit. One of the exits you can use is
    MGA00001  Material Master (Industry): Checks and Enhancements
    Thanks & regards
    Hameed Parvez

  • Issue: Sending material master using ALE-IDOC.

    Hi all,
    I am sending the material master data from one server to another.All the fields getting transported along with creator(field ERNAM) of the material.When viewed from WE05 the field is having the same data as original creator of the material in sending system.But when i view data in receiving system for field MARA-ERNAM the field is having the USER NAME giver in RFC-DESTINATION.can anybody guide so that the creator from IDOC is updated in database and not the creator given in RFC
    destination.
    Thank you.
    Edited by: sanu debu on Jun 30, 2009 9:35 AM

    Hi,
    Hope you are using some middleware to transfer the Idoc to other system, check the mapping details from the middleware side whethere the field mapped correclty.

  • Error while sending Material Master IDOC to Auto ID 2.1

    Hello All,
    I am using Auto ID 2.1 with SP1 on NW04.
    Integration server is XI 3.0 with corresponding XI Content for Auto ID.
    The backend is ERP2004.
    I am using the config guide for Auto ID 2.1.
    After completing the configuration, I tried sending the Material Master IDOC to Auto ID.
    IDOC gets created successfully. XI says the message transfer is successfully.
    In the log of Auto ID. I am getting the following error while importing the Material Master product:
    Product ID AUTOIDAII_MAT has an invalid format
    Internal error in /AIN/DM_PROD_COMMIT
    Message no. COM_PRODUCT897
    The description says that it may be a program error.
    Or the program expects some variable to be filled which has not occured.
    Any idea what could be the error. Or where should I try looking for to get more detail info.
    Do some one knows what should be the patch levels for the different components in all three servers for Auto ID 2.1 SP1.
    Thanks for any kind of input.
    Regards,
    Arundeep Singh

    HI Arundeep,
    use the following
    1) XI 3.0 SP level 12
    2) AII 2.1 SP2
    3) check in rfid outbound configuration guide for any customising for product to be done in AII
    regards,
    ashit singh

  • Enhance Material Master with custom tables

    Hi MM Gurus,
    I would like to enhance the material master data (transactions MM01/2/3) with a new tab (screen) containing some customer fields and Z tables?
    I’ve been looking the follow <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/ff/516a6749d811d182b80000e829fbfe/frameset.htm">SAP Help link</a>, “Integration of New Tables in the Material Master”, and SAP Note 44410, but still is not very clear to me how to achieve my goal.
    Can anybody tell me all the steps that I’ve to perform to do that?
    Do you know any other documentation about this issue, like a how-to guide for instance, that I can use?
    Thanks a lot for any help!
    Alexandre

    Hi,
    Firstly I would suggest that you do not do this unless you ABSOLUTELY have to.
    It is not a major modification but there is another more standard way to add fields to material masters and no modification or user exit is required.
    Simply classify the materials and use a characteristic for each additional field you want to add.
    The classification system is very flexible and very powerful and so it can easily handle complex data and interactions with other data. You can add multiple classes and so use whole groups of data. There is also a lot of standard validation as to field contents etc. (Including tables of possible entries etc.)
    So please do consider using classification first (even if you already use classification of your materials). You can also then use the standard search functions on any of the new "fields" .
    No ABAP, No modification and available now !
    Worth considering?
    Steve B

  • Problem in material master LSMW - Classification view

    Hello all,
    I have created LSMW for material master upload with standard input method. Material is getting created thr's this, but 'classification view' is not getting created only for some material groups. Functional consultant is saying that there is no such configuration exists in system regarding material groups.
    Plz advice how to resolve this?.
    Regards,
    Aparna Gaikwad

    I giveup now
    You close my all doors by saying "All views r needed".
    Now i would suggest if any help you can take
    Expert Forums » SAP Solutions » ERP - Logistics Materials Management (MM)
    There definatly you would be able to find some alternate solution.
    Cheers
    Amit.

  • Upload Material master with long text using LSMW

    Hello,
    i want ot upload material master data via MM01 using LSMW in following views: basic data 1 ,2,  purchasing, purchase order text, plant data 1,2.
    i have to upload long text in purchase order text with length more then 132 char. (approx 700 char long text). and i have text file in which long text is maintained in a single row. then how can i do it without formating text file or anyother possible solution.
    please help.

    ca u clarify how can i do it.
    suppos i have longtext   "Air cooled type air-conditioning unit complete with following components & distance between indoor & outdoor unit is  10 RMT.  A).Indoor evaporating unit comprising of cooling coils,insulated drain tray,20 micron HDPE washable filters,blower,motor,electical junction box etc. B).Outdoor condensing unit comprising of hermatic/semiharmetic compressor's.condenser coils,propeller/axial fans,motors,pressure switches/cutout etc.C).Charging of refrigerant gas & oil.D).Inter connecting refrigerating piping  of copper duly insulated with EXPANDED POLYETHYLENE tubing.E).Complete electical power wiring of AL.&Control wirng of copper required from indoor & outdoor units.Earthing of the complete system with 8 G G.I.wire.  F).Electrical panel will be completed with necessary starter,fuses,switches,timers,over-load relays,contactors,push button and indicating lamps,single phasing preventer etc..and also with remote control with cording. G).The panel should have 1 no.potential free contactor to connect with central fire detection system.The panel should have voltage scanner to ensure stabilized power input to the machine.H).Outdoor unit shall be mounted on MS angle base frame structure duly black painted with synthetic epoxy paint.I).The frame structure shall be mounted on MS plate & serrated rubber pads."
    then what i have to do changes in lsmw.?

  • Material master with profit center

    Dear All,
    Pl advice me regarding following - (Version - ECC 6.0 with Doc Splitting Active)
    The client is into Engg, Construction industry. We are having Project System. There are around 20-30 projects going on. Client wants to track receivables / payables on Each Project along with the Profit & Loss Statement for the project.
    1) Decided to create each project as a Profit Center.
    2) Problem is with material code & plant.
    3) To track material / vendor transactions Project wise - EACH Project can be created as a Plant. So we can maintain Plant wise data for each material & maintain the Profit Center in Plant Data.
    But we want to avoide creating Number of Plants. Instead planning to create only One Plant & create number of storage locations = number of Projects.
    Here the Material / Vendor Transactions will be posted (in General Ledger view) with Only common Profit Center maintained in Material master.
    Can we overcome this? Can we derive the Project wise Profit center some where from Srorage location or any other area (using substitution etc) without affecting sanctity of Document Splitting Function?
    Pl help. This is very important.
    Thanks,
    mukesh

    Hi
    The basic purpose of having plants is to have different valuation area. Unless you define your project sites as individual site how you are planning to handle the inventory/procurement/payment of each project separately. ForvBalance sheets you need to have plant for each site. Moreover Storage Locations are virtual and does not help you in balance sheet calculation.  materials can be extended to all plants with individual prices and other unique values as ity differs from plant to plant if not all at least price will vary.
    Regards

  • LSMW datamigration material master with multiple distribution channels

    Hi,
    We plan on using the LSMW to migrate our customer's material master to a ECC 6.0 system.
    Currently we use the BMM00 and BMMH1 structures, but there I can specify only one distribution channel.
    Does anyone know how to include multiple distribution channels in LSMW material master migration?
    Thanks in advance for your support.
    Edited by: Mohammed Qasim Malik on Jan 21, 2008 10:01 AM

    you need an extra record in your source per distibution channel.
    Alternative you can create the extra record with a small Abap  code in LSMW in section __END_OF_RECORD__
    There you habe in standard the code:
    transfer_record.
    just add after this statement a statement that gets the additional wanted distribution channel into the  distribution channel field.
    BMM00-VTWEG =  'xx'.
    transfer_record.

  • Uplaoding material master with LSMW

    Hi,
           I want to  create new 1000 material , i want to know the process for uplaaoding sales text and purchase order text is it  possbile with normal recording or for text uplaoding i have to folow different procedure,
      regards,
       zafar

    you should never load materials by recording method. Use standard/direct input method, BAPI or IDOC method.
    Material master is too dynamic to use a static recording.
    However, in any method it is possible to load texts.
    Texts can even be loaded with an extra LSMW import method after material master load.

Maybe you are looking for