Send notifications to different X Server

Hey, I am currently struggeling with getting OSD_CAT notifications to Display :1.
I play games in a different X Server, to provide a workaround for Alt+Tab and in case a game crashes.
I've set up EseKeyD to use my multimedia keys accross both X Servers and when pressed a message appears thanks to osd_cat.
But when I am on display :1 (X Server 2), the notifications don't appear. Is there a way I can modify my script, like an if statement, to look for display :1 and send the notifications to that display instead of :0?

Hi Daniel,
thanks a lot for your quick response.
I went through your blog and tried implementing the same.
But in my case i have to send parallel notifications to both the states.
Please correct me if i am wrong, using if conditions in rules is allowing me to send to only one state.
I also tried the following approach
1) setting the organization units in bpm workspace
2) passing values using human task parametric roles
3) and looping the subprocess that has the humantask for the count of states.
I am able to loop the subprocess but i am not able to change the parametric role value for the next iteration of the subprocess.
Can you please help me in resolving this?
thanks,
Raju

Similar Messages

How to send notifications to different user groups based on payload value

Hi Gurus,
I have a scenario in BPM where i have to send notifications to different user groups based on the payload value.
ex:
Payload sample:
<employees>
<emp1>
<state>TX</state>
</emp1>
<emp2>
<state>AZ</state>
</emp2>
</employees>
Requirement: I have to send notification through Humantask to users of TX and AZ as mentioned in payload.
Can you please help me out in achieving this in BPM?
Thanks,
Raju
Edited by: user0808 on Mar 1, 2013 12:58 PM
Edited by: user080811 on Mar 4, 2013 11:06 AM
Edited by: user080811 on Mar 4, 2013 11:07 AM

Hi Daniel,
thanks a lot for your quick response.
I went through your blog and tried implementing the same.
But in my case i have to send parallel notifications to both the states.
Please correct me if i am wrong, using if conditions in rules is allowing me to send to only one state.
I also tried the following approach
1) setting the organization units in bpm workspace
2) passing values using human task parametric roles
3) and looping the subprocess that has the humantask for the count of states.
I am able to loop the subprocess but i am not able to change the parametric role value for the next iteration of the subprocess.
Can you please help me in resolving this?
thanks,
Raju

I have 4 email accounts in apple Mail. My mail is sending from the wrong account. even on "reply" it sends from a different account. I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from a

I have 4 email accounts in apple Mail. My mail is sending from the wrong account. even on "reply" it sends from a different account. I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from the same gmail account. Help.

I HAD two accounts because of this problem. I completely removed the problem account from the Apple Mail client. Guess what is happening?? That's right - Mail is still sending from the other account that no longer exists on my computer, and I have absolutely no idea how this is happening. This is incredibly frustrating. When a recipient chooses to reply to my message, quite often I won't get it now because it is going to the other account that has now been deleted from my system. COME ON APPLE!!! WHAT'S THE DEAL WITH THIS???

How to send email notification in different languages in Workflow ?? Urgent Help Needed

Gurus,
How to send email notification in different languages in Workflow? Can anyone send me some useful guidelines or link where it is mentioned.

There is no profile option available to specify whether send or not send email notification.
But after login, in preferences youcan set the notification preference value by which you can configure whether to send or not
to send email notifications.
If you select ''Do not send me mail' or 'Disabled' it will not send.
For other values it sends the notfication in different formats like text, html, attachments etc...
Edited by: sarojak on Jun 27, 2011 7:18 AM

Sending a message to different application server

Hi all
I have a session bean that send message to a message driven bean in the same application server.
I wonder how to send the same message to a message driven bean in a different application server.
Is Context.PROVIDER_URL (jndi hard coding) important for that matter?

anyway if i do not want use jndi.properties file it's enough specifing the Context.PROVIDER_URL pointing to the new jboss server???
// hard coding configurazione jndi
          Properties properties = new Properties();
          properties.put(Context.INITIAL_CONTEXT_FACTORY,
          "org.jnp.interfaces.NamingContextFactory");
          properties.put(Context.URL_PKG_PREFIXES, "org.jnp.interfaces");
          properties.put(Context.PROVIDER_URL,
          "xxxxxxx");
          try {
               initialContext = new InitialContext(properties);
          } catch (Throwable ex) {
               throw new ExceptionInInitializerError(ex);
          }

Exception when sending mail to client on a different mail server

Hi,
When i try to send a mail to a client on a different mail server from mine I am getting the following exception.
javax.mail.SendFailedException: Sending failed;
nested exception is:
class javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
class javax.mail.SendFailedException: 550 not local host yahoo.com, not a gateway
It works perfectly fine when i send a mail to a client on my mail server. I am stuck up at this point - PLEASE HELP, any help greatly appreciated.
Thank you,
npaila

Most of these are, of course, anti-Spam measures implemented by the various SMTP hosts, to prevent spammers from using their servers to spread the stuff (what you're doing is exactly what Spammers do as well).
In general, most properly configured SMTP servers will only accept messages if:
(a) Your IP address (as seen by that SMTP server) maps back to a proper host name, AND
(b) The recipient of the message is "local" as determined by that SMTP server, AND
(c) In many cases, the SMTP server will also cross-check your HELO/EHLO address and the MAIL FROM: value.
It may take a few attempts to get all this right.

BPMOn: Is it possible to send email notification to different groups based on filter value for IDOC?

Hi there,
I have setup the monitoring for idoc through interface monitoring and I am getting the alerts for the same. The alert is generated for different status values for the same idoc. Now my question is, is it possible to send email notification to two different groups based on the status values?? I mean for example , for a single idoc for some status values I want to send email notification to group1 only and for other status values I want to send notification to group2.Any help will be apperitiated.
Thanks and regards,
Rutvik Upadhyay

We currently do not support that level of control for sending email notifications. If you think others are interested in this you should add an idea here: http://forums.adobe.com/community/formscentral?view=idea
We use that to help us prioritize our work.
Thanks,
Randy

Notification about events in server 10.9, Notification about events in server 10.9

Hi all,
I was using a Server 10.6.8 in the past and there was a setting which I now miss in the new server add on for 10.9: I was able to configure a mail adress für the virus scanner so that I was notified as soon as there was a (possible) malware found from the scanner. Now, this seems to be gone?`I found that I can configure some events via mail (eg Cachuing, Firewall etc), but first, there is no entry called "virus scanner" (only "mail" which could contain the info) and second and more important, it seems to me that I cannot configure different mail addresses for different events. Is this correct or is there any solution to my problem?

I think you'll find the notification settings in:
/Library/Server/Mail/Config/amavisd/amavisd.conf
virus_admin_maps => ["virusalert\@$mydomain"],
spam_admin_maps => ["virusalert\@$mydomain"],
$mailfrom_notify_admin = "virusalert\@$mydomain"; # notifications sender
$mailfrom_notify_recip = "virusalert\@$mydomain"; # notifications sender
$mailfrom_notify_spamadmin = "spam.police\@$mydomain"; # notifications sender

Exception: Could not send notifications due to Error

Hi experts...
I have configure the Notification Message function for the new task in UWL follow the guide below.
https://help.sap.com/saphelp_nwce711/helpdata/en/e4/32ff7865fa483dba3686160f5c6dd0/frameset.htm
It does work on the server (BPM/CE7.11) in my office. (CE install in VMware along with mail Server, use same IP: 8.8.2.180)
But when I do the same thing on client's side, it just doesn't work out. (use the same VM instance, but in different Network environment)
I list the detail info. of settings and exception below:
For BPM Mail Server Connectivity:
host: 8.8.2.180 (also try bpm.hjoy.com.tw)
user: jason
e-mailAddress: jason @demo.hjoy.com.tw
PSW: goodtry
For BPM Notification Messages Configuration:
Mark both option
URL: http://bpm.hjoy.com.tw:50000
Could not send notifications due to Error: (Failed in component: sap.com/tcbpemtmear, BC-BMT-BPM-DSK) Exception raised from invocation of public int com.sap.bpem.tm.notification.MailNotificationSender.startNotification(com.sap.bpem.tm.adapter.Action,com.sap.bpem.tm.ITaskInstance) throws java.lang.IllegalArgumentException method on bean instance com.sap.bpem.tm.notification.MailNotificationSender@1a44705 for bean sap.com/tcbpemtmearannotation|bpemtmejb.jarannotation|MailNotificationSender in application sap.com/tcbpemtmear.; nested exception is: javax.ejb.EJBTransactionRolledbackException: (Failed in component: sap.com/tcbpembaseear, BC-BMT-BPM-DSK) Exception raised from invocation of public void com.sap.bpem.base.mail.MailSenderBean.send(com.sap.bpem.base.mail.IMessage) throws com.sap.bpem.base.mail.MailException method on bean instance com.sap.bpem.base.mail.MailSenderBean@14d43e4 for bean sap.com/tcbpembaseear*annotation|bpembaseejb.jar*annotation|MailSenderBean in application sap.com/tcbpembaseear.; nested exception is: com.sap.bpem.base.mail.MailException: javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 554 User unknown
Please kindly help me for this...

Good day! I configured the notification but I stack with a problem.
There is an error in logs:
Could not send notifications due to Error: {...} nested exception is: com.sap.bpem.base.mail.MailException: com.sun.mail.smtp.SMTPSendFailedException: 550 authentication required
But I've entered the login and the password to the smtp. Where can I find a reason of the error?
Also I tried to configure notification service using the link http://help.sap.com/saphelp_nwce711/helpdata/EN/e4/32ff7865fa483dba3686160f5c6dd0/content.htm, but when I try to configure tcbpembase~ear service there is no edit button and the column "Modifiable" has no check. What it can be?

Apple Mail - Email Send Field Showing Different Data, Unable To Sort Correctly

Hi All,
I'm having a very annoying issue in Apple Mail, running 10.6. Some of the incoming mail messages are showing the sender's email address in the "From" field, rather than the person's "Name". There are also cases where this is happening, but this time the email address in the From field has angle brackets ( < and > ) around it. This makes sorting of emails by sender incorrect and broken apart.
So the three different ways it's displaying in the Mail window are:
From
Subject
John Smith
Lunch Today
[email protected]
Lunch Today
<[email protected]> <[email protected]>
Lunch Today
Here's what else I know:
- The error is NOT limited to a specific person, email address or mail domain. In other words, it has occurred differently with the same sender.
- The errors seem to occur in periods of time. In other words, it will display "correct" for a period of time (weeks or even months), then display "wrong" for a period of time. So it's not like every other message is different.
We contacted our ISP to see if they knew anything. They scratched their heads like we did, and they think that the issue is coming from the sender, rather than the mail server having a hiccup.
This is VERY frustrating, as I get lots of email in a day's time that can be time-sensitive.
Thanks in advance,
Mike

Hi All,
I'm having a very annoying issue in Apple Mail, running 10.6. Some of the incoming mail messages are showing the sender's email address in the "From" field, rather than the person's "Name". There are also cases where this is happening, but this time the email address in the From field has angle brackets ( < and > ) around it. This makes sorting of emails by sender incorrect and broken apart.
So the three different ways it's displaying in the Mail window are:
From
Subject
John Smith
Lunch Today
[email protected]
Lunch Today
<[email protected]> <[email protected]>
Lunch Today
Here's what else I know:
- The error is NOT limited to a specific person, email address or mail domain. In other words, it has occurred differently with the same sender.
- The errors seem to occur in periods of time. In other words, it will display "correct" for a period of time (weeks or even months), then display "wrong" for a period of time. So it's not like every other message is different.
We contacted our ISP to see if they knew anything. They scratched their heads like we did, and they think that the issue is coming from the sender, rather than the mail server having a hiccup.
This is VERY frustrating, as I get lots of email in a day's time that can be time-sensitive.
Thanks in advance,
Mike

I want to send notifications to outside(i,e mail box) from oracle, and users will approve the notification from email

Hi
I have a client required to send notifications to outside email box, and also user will approve this notification through email.(i,e not logged into oracle and approve it) in 11i instance.
i need to send mail from po department to finance department
once finance department approves , then mail back to po department that your notificaiton approved.
from address:=[email protected]
to address:=[email protected]
as part of this we did IMAP set up
and used the following code. and getting the notifications from Oracle to my mail box.
my main issue is when user approves the wf notifications, it is not showing my specified email address in the attribute #WFM_REPLYTO, always it is showing the IMAP set up wfdev address
what is the value i need to use for this #WFM_REPLYTO
eventhough i am sending the to_address email id to the following attribute(wf_engine.setitemattrtext), the workflow approval not working for that email id.
only if i am using the '[email protected]' in the imap set up, then only approval is working.
how can i override this to_email address value([email protected]) to my desired email address?
wf_engine.setitemattrtext (itemtype => l_item_type,
itemkey => l_item_key,
aname => '#WFM_REPLYTO', -- to_ address
avalue => '[email protected]' -- [email protected]
if any body having some sample code related to this please share on this.
Thanks
sam

Sam,
Can you find any errors in the Workflow log file?
Please review the following docs.
Setting Different Values For Attributes #WFM_FROM & #WFM_REPLYTO Does Not Happen Or Results In SAXParseException (Doc ID 1455191.1)
How To Change The Default From and Reply To Email Address For Workflow Email Notifications (Doc ID 760477.1)
Thanks,
Hussein

An error occurred while sending mail. The mail server responded: Relaying not allowed.

Suddenly I am not able to send any email from my account, from pc or phone.
It gives error message "An error occurred while sending mail. The mail server responded: Relaying not allowed. Please check the message recipient --------and try again."
I have checked account setting and is correct. please help

This message, which comes from the server, usually means that you are using an smtp server provided for use with one particular account to send messages "from" other accounts. The fact that it also happens with your phone does indicate that it is external to Thunderbird.
How many different email accounts do you have? How many different providers are involved?

How to send notification mail by IDM 7.1?

HI,
I configured the idm 7.1 and want to send notification mail to user when a new user is created.
But I can not get email from IDM. I think the SMTP server is right and I can telnet to SMTP server and send mails.
How to test the IDM configuration is right ? or how to test send mail notification by an easy way ?
Thanks.

I configured the IDM from Configure--> servers -->Edit Server Settings page ,Email Template, as filled form:
Default SMTP Server      192.168.22.222
     Use default
Default SMTP Port      25
     Use default (25)
SMTP Port      25
SMTP Authentication Enabled
     Use default (true)
     Authentication Enabled
User Id      idmmail
Password      *****
Default SMTP Enable SSL
     Use default (false)
     SSL Enabled
     Disable Certificate Authentication
When I run the "ALL USERS" report, I select the 'Email Report' and filled the mail address. But after running the report , I can't receive email and no error messages displayed.
Could you tell me how to do I can debug or trace the messages if the IDM sent or not sent mail , if it connects to mail server ?
Thanks.

Could not send notification 65569 (status 'FAILED')

Customize Workflow runs with 2006 error - only happen in the morning
We have created a customize workflow which works a bit funny here:
When we first run the workflow in the morning, it ends up with this error:
Activity Buyer Notifications
Result Mail
Error Name WFMLRSND_FAILED
Error Message 2006: Could not send notification 65569 (status 'FAILED') to 'CONTRACT SERVICES'.
Error Stack WF_MAIL.GetDocContent(PO_DETAILS_BUYER)
Then, thinking of some problem might happend to the workflow mailer, we run the standard workflow, e.g. PO Approval. It runs successfully and send out the notification email. So, we then run the customise workflow again, and this time it works, no error has been generated as above.
The funny thing is, this had happened more than a week, where every morning I have to somehow run a standard workflow (normally I just create a new PO and send for approval), and got my customize workflow run successfully.
Can someone highlight what's going wrong here?
Is that some setup or soemthing that contribute to this problem?
Thanks,
Patricia

The notifications are defined in the workflow but they do use a document type attribute (we send a table of data "Job", "Job Name", "Amounts").
We have changed the database packages a lot and that created many problems afterwards so we minimized when we make those changes and we restart everything (database, IAS Server) afterwards.
Here is the email to SYSADMIN:
=========================================================
Subject: Error in Workflow DUNAPIN2/20060323123955x30741282 2006: Could not send notification 41119 (status 'ERROR') to 'KKEMPER'.
From
To SYSADMIN
Sent 03-APR-06
Due
Notification ID 41121
An Error occurred in the following Workflow.
Item Type = DUNAPIN2
Item Key = 20060323123955x30741282
User Key =20060323123955x30741282
Error Name = WFMLRSND_FAILED
Error Message = 2006: Could not send notification 41119 (status 'ERROR') to 'KKEMPER'.
Error Stack = &ERROR_STACK
Activity Id = 52557
Activity Label = GET_GENERAL_LEDGER_APPROVAL:NTF_V2_AR_DEPT_OFF_MGR
Result Code = #MAIL
Notification Id = 41119
Assigned User = KKEMPER
Workflow monitor
Please click on one of the following choices to automatically generate an E-mail response. Before sending the E-mail response to close this notification, ensure all response prompts include a desired response value within quotes.
How do you want to Continue?
How do you want to continue?: Abort Resolved Retry Request information
=========================================================
Any help would be greatly appreciated.
Jim

How to select email account for sending notifications

I have three calendars (for example, C1, C2, C3). My Mail application has 3 email accounts (A1, A2, A3).
How can I make the calendar send notifications using a selected email account?
For example, I want all calendar email notifications to be sent using account A2.
I'll appreciate your help.

sd0084,
If I change, all my emails would go out the selected account.
Correct.
I routinely use that method, which means that I must select a different account in the "New Message" window "From:" field when I choose to send mail from a different account.
;~)

Send notifications to different X Server

Similar Messages

Maybe you are looking for