Send PHP/MySQL results to popup window as HTML

Hi all,
Not even sure if this can be done, but I have a Results.php page that includes a line:
"My task, [<?php echo $row_Recordset1['Task'];?>], is in the top [<?php echo $row_Recordset1['RankPercent']; ?>] of tasks in the company";
...where the php tags represent results from a MySQL search.
How do I send this as html to a mini-popup window so that the people can send it to their friends on facebook/twitter/etc?
NOTE: the issue here isn't in creating a popup page - I can do this.
What I need to be able to do is pass that sentence to the popup.php page "exactly" as it appears on the page when rendered.
I have been experimenting down the...
$text = "My task, [<?php echo $row_Recordset1['Task'];?>], is in the top [<?php echo $row_Recordset1['RankPercent']; ?>] of tasks in the company";
...route, but this just gives a load of parse errors (predicably enough).
Any thoughts?

Actually, that's pretty good! There is a slight syntax error - the first <?php doesn't seem to render properly (in fact, the second one looks good until you take the first one out, and then it develops the same problem as the first one did...). Any cloues?
If not, don't worry - I'm sure I can debug it from here, but if you can think of anything I'd love to hear it. It seems to be something to do with the double quotes...

Similar Messages

Maintaining search results in popup window

I have a jsp with a link to search .. when i click on the link, i popup a jsp search window.. on submit,it displays the results in a table.. but when i close the popup window and again open it, the search results are not displayed.. How can i once maintain the search results even after closing the popup?

Hold the last search criteria used in the session and check if they exist whenever the search window is opened.

Firefox: Popup windows numbingly slow!

This is probably off-topic as far as HTML DB is concerned, but I suspect there are a fair amount of FF users on this forum so I am hoping to get some responses.
I notice that after my FF browswer (1.0.1) has been up for a week or so, any popup window in HTML DB, either in the App Builder or when running my app thru the App Builder are excruciatingly slow. After I click on the link, it takes a good 6 seconds for the window to pop up.
If I restart FF, everything is fine.
I dont have any tabbed browsing extensions or any other extensions installed that would interfere with this.
Anyone else experience this? Is there a solution?
Thanks

I havent been brave enough to leave IE open for more than a week! Its lack of tabbed browsing make it really hard to do so. I dont want a dozen icons on my taskbar!
Anyway, I suspect its a FF issue since I had that other issue with the URL redirects.
Thanks

DW CS5, Sending contact form results to email with page redirection using php script

I am currently building a site from scratch with Dreamweaver, with the intent of replacing my current website layout that was designed using Intuit's website builder. My dreamweaver site is not online, but i have setup a local test server on my computer, using XAMPP, and i have an apache server with a MySQL database and a mercury mailserver running. I mention that in case it makes a difference in your answers. If necessary, I can include those settings, but that may be asking too much.
I have an html contact form for users to schedule service appointments. I need the resulting actioned php file to do the following after submit is clicked: verify certain fields have been entered; prevent spammers or verify human visitors; send the form results to a (hidden from public view of any kind) email address; redirect user to a confirmation page, or an error page.
I found the following code but being less than a newbie im not sure what needs to be changed, or if its even the right script i should be using:
5 <?php
6 $email = $_POST['email'];
7 $mailto = '[email protected]';
8 $mailsubj = 'You Have a Service Request';
9 $url = '/MyLandingPage.html';
10 $req = '0';
11 $mailbody = "Results from form:\r\n";
12 $space = ' ';
13 $line = '
14 ';
15 foreach ($_POST as $key => $value)
16 {
17 if ($req == '1')
18 {
19 if ($value == '')
20 {echo "$key is empty";die;}
21 }
22 $j = strlen($key);
23 if ($j >= 20)
24 {echo "Name of form element $key cannot be longer than 20 characters";die;}
25 $j = 20 - $j;
26 for ($i = 1; $i <= $j; $i++)
27 {$space .= ' ';}
28 $value = str_replace('\r\n', "$line", $value);
29 $conc = "{$key}:$space{$value}$line";
30 $text .= $conc;
31 $space = ' ';
32 }
33 mail($emailadd, $subject, $text, 'From: '.$emailadd.'');
34 echo '<META HTTP-EQUIV=Refresh CONTENT="0; URL='.$url.'">';
35 ?>
Can anyone please illuminate me on what I need?
Thank You in advance

Take a read here, this might enlighten you a little.
http://www.paulgdesigns.com/learncontactform.php
You are doing this with your local testing server, is it set up to email?
Gary

Hi all   report that sends email shows popup window needs to be supressed

hi all
i have developed a report that sends email as an attachement, but this report pops up a window in the end ( it says 'no of objext sent') and there i have to press enter, but my report is running in the background (scheduled report) and therefore there should be no pop ups in the report.
question is how to avoid popup window in the following program.
below is my code
just enter your email id in the code and it will run anywhere.
TABLES: ekko.
*PARAMETERS: p_email   TYPE somlreci1-receiver
                                 DEFAULT '[email protected]'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using         " p_email
                                    'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             changing gd_error
                                      gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
   UP TO 1 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
      Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
            con_tab TYPE x VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
class cl_abap_char_utilities definition load.
constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
         INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
    CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                wa_charekpo-aedat wa_charekpo-matnr
           INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using                  "p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver value '[email protected]',
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'.
               AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
       Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
thanx
rocky

hi rocky,
pls comment the submit program form INITIATE_MAIL_EXECUTE_PROGRAM by default the email runs in background and there is no need to submit 'rsconn01' it again to that program where u actually get the pop-up...
try it
hope this helps
regards,
karthik

Show the custom popup window on clicking the people name in sharepoint people search result

Show the custom popup window on clicking the people name in sharepoint people search result
We are doing the below code to open a popup but while clicking on name link its postback the page and not opening the popup in first click but opening in second click.The same issue occurs while navigate to second page using pagination
The below code used to show name in item template
<button id="NameFieldLink" class="temp" style="font-size: 12px;text-decoration:none;color:#0072c6;border:0px solid #fff;background:transparent;margin-left: 1px;height: 15px;padding: 0 10px 17px 0px;text-align: left;cursor:pointer;font-family:
Arial, Helvetica, sans-serif;" title="">_#= DisName =#_</button>
The below jquery code used to open popup in control search template
ctx.OnPostRender = [];
ctx.OnPostRender.push(function () {
$(".temp").on("click", function(event)
event.preventDefault();
$('#fadeout').show();
$('#pop1').find('.tab-content-people').html($(this).closest('.emp-card').find('.pop-content').html());
$('#pop1').show();
return false;

I believe the issue is that you are not actually searching against the result source you made in step #1.
It's not enough to make a result source, you have to tell the search results web part to use it.
Try this:
1. Go to the Pages library of Search Center
2. Create a new Search Results page
3. Edit the page, then edit the search results web part
4. Change the source for the search results web part to your source
5. Add the page to your Search Center navigation
6. Run the search on that page
Scot
Author,
Microsoft SharePoint 2013 App Development
Author,
Professional Business Connectivity Services
Author,
Inside SharePoint 2013
Blog, www.shillier.com
Twitter, @ScotHillier
SharePoint Trainer, Critical Path Training

UUT serial number is not displayed in batch results popup window?

UUt serial number is not displayed in batch results popup window. I am using TestStand 2012 SP1 f1 (5.0.1.66). I am also using Prebatch callback and setting up
Parameters.ModelData.TestSockets[index].UUT.SerialNumber with the UUT serial number. I have used the exact sequence file with TestStand 4.2 (4.2.0.134) with no problems.

Sorry for my late reply I was away for work. I actually revisited the code that I implemented with TestStand 4.2 (4.2.0.134) and it is showing the exact problem. Sorry for misleading you. however the UUT report is showing the correct serial number for each unit. This would be something that is nice to have but not critical for my project. I am basically auto discovering all my UUT so instead of scanning the serial number I read it from the UUT memory so there are a lot of steps in my PreBatch call-back but they are all related to reading the UUT serial number. Once I read all the UUTs serial numbers I set the following in a for loop:
Parameters.ModelData.TestSockets[Locals.For_Loop_Index].UUT.SerialNumber =StationGlobals.UUT_Serial_Numbers[Locals.For_Loop_Index]
I tried to implement my a simple PreBatch with only a for loop and an array of serial number and I ended up with the same issue. So I am suspecting that the batch report is getting the serial numbers from a different variable and that variable is set when you run the batch option without the PreBatch call-back.
Kind Regards,
Oshana

Football/soccer results grid advice php/mysql

I need to create the above from my database, and I am not sure how to go about it.
Basically this calculates all the goals scored against another team. If team 1 (column) is the same as team 1 (row) an "x" is put in place as team 1 cannot play itself
I have added my database structure
Image of example
http://filedb.experts-exchange.com/incoming/2010/08_w34/t337870/Untitled-1.jpg
CREATE TABLE IF NOT EXISTS `matches` (
`match_id` int(8) NOT NULL auto_increment,
`date` date default NULL,
`time` varchar(5) default NULL,
`report` longtext,
`referee_id` int(8) NOT NULL,
`season_id` int(8) NOT NULL,
PRIMARY KEY (`match_id`),
KEY `referee_id` (`referee_id`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=3 ;
-- Dumping data for table `matches`
INSERT INTO `matches` (`match_id`, `date`, `time`, `report`, `referee_id`, `season_id`) VALUES
(1, '2010-08-02', '15:00', 'N/A', 1, 2010),
(2, '2010-08-10', '15:00', 'n/a', 1, 2010);
CREATE TABLE IF NOT EXISTS `matchscores` (
`matchscores_id` int(8) NOT NULL auto_increment,
`match_id` int(8) NOT NULL,
`team` int(8) NOT NULL,
`score` int(8) default NULL,
PRIMARY KEY (`matchscores_id`),
KEY `match_id` (`match_id`,`team`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=3 ;
-- Dumping data for table `matchscores`
INSERT INTO `matchscores` (`matchscores_id`, `match_id`, `team`, `score`) VALUES
(1, 1, 1, 2),
(2, 1, 2, 1);
CREATE TABLE IF NOT EXISTS `team` (
`team_id` int(8) NOT NULL auto_increment,
`team_name` varchar(255) NOT NULL,
`team_address` text,
`team_phone` varchar(25) default NULL,
`team_email` varchar(255) default NULL,
`team_web` varchar(255) default NULL,
`colours_home` varchar(50) default NULL,
`colours_away` varchar(50) default NULL,
`manager` varchar(255) default NULL,
`assistant` varchar(255) default NULL,
`club_rep` varchar(255) default NULL,
`division` varchar(255) default NULL,
`team_pic` varchar(255) default NULL,
`team_logo` varchar(255) default NULL,
`profile` mediumtext,
`honours` mediumtext,
`password` varchar(10) NOT NULL,
PRIMARY KEY (`team_id`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=4 ;

Tbilly,
I have just the thing you are looking for. Check this out
here:
http://www.smithmediafusion.com/poll/poll.html
MySQL and php with a Flash front.
drop me an email if you are interested and would like more
info.
danswhc AT yahoo dot Com
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
<--check this
*Must Read*
http://www.smithmediafusion.com/blog
"tbilly" <[email protected]> wrote in
message
news:erfeo6$9a$[email protected]..
> Can anyone recommend a book or tutorial for a survey or
poll script I
> could
> implement using php/MySQL? Preferably one with options
such as: changing
> question types (radio vs. checkboxes), sessions, and
graphical displays of
> results. Would like to use dreamweaver to set up content
management pages
> to
> edit/add answers and questions in a database. Thanks in
advance.
>

How to send data from popup window to parent window

Hi,
I need help some like this
I have parent window ,in that i am clicking + button one dynamic row should add and one popup window has to diplay .Popup window contain 3 comboboxes and 5 text boxes. Once i am clicking OK button in popup window those values has to display at specified row in parent window
Kindly help me ,
Thanks
jyothi

See this
http://www.oracle.com/technology/products/jdev/101/howtos/jsfdrilldown/index.html

PHP/Mysql issue

I use Dreamweaver CS3 to create my sites on a Windows/Apache
Server with PHP5 and Mysql 5. The site works perfectly on my
testing server at home. On the Web server I'm getting the following
error which causes the page to not load:
PHP Warning: mysql_query(): supplied argument is not a valid
MySQL-Link resource in
/hermes/bosweb/web248/b2488/ipw.horsehelp/public_html/residents/residents.php
on line 63
PHP Warning: mysql_select_db(): supplied argument is not a
valid MySQL-Link resource in
/hermes/bosweb/web248/b2488/ipw.horsehelp/public_html/residents/residents.php
on line 61
The lines in question are:
Line 61 - mysql_select_db($database_conn_phh, $conn_phh);
$query_getSuccess = "SELECT * FROM horses WHERE status =
'Success Story' ORDER BY horse_barn ASC";
$getSuccess = mysql_query($query_getSuccess, $conn_phh) or
die(mysql_error());
$row_getSuccess = mysql_fetch_assoc($getSuccess);
$totalRows_getSuccess = mysql_num_rows($getSuccess);
All of the code is supplied by Dreamweaver. I did not tweak
the code. I'm not a web developer and what I have found out there
is still reading greek to me. My connection file is working and
connecting the database that I have tested.
Since the above code is throughout the site in one form or
another it's causing me major headaches. Any help would be
appreciated.

This is the first time I've used Adobe products so if the
following is in the wrong forum (It's the closest one I found so
far) or the format is incorrect please forgive me.
I'm new to Dreamweaver CS3 and as I was reading the "first
steps" it mentions to set up a Dreamweaver site right away. I got
as far as completing "Site Definition" page under the basic side of
the setup screen.
The next screen is "Do you want to work with server
Technology?"
There are 2 options - Yes or No. If you select yes a
drop-down menu appears with several options (but you can only
select one)...
Asp Javascript
Asp VbScript
Asp.net#
Asp.net Vb
Cold Fusion
JSP
Php MySql.
I know nothing about these format and brand new to web design
so I thought it best to contact GoDaddy (my hosting account) to
find out what their servers would support. I spoke to a tech rep
but she wasn't sure.
She did mention that I have a windows hosting account and Php
MySql would not work unless I changed to their Linux platform at no
additional charge.
The site I have in mind will design with CSS, Liquid layout,
have some flash, widgets, an inquiry form that clients complete and
results e-mailed to me, auto-responder, Paypal link and whatever
else I can discover from Dreamweaver.
My question being:
I haven't even begun designing my site because I do not know
what weather I should select the Yes option and select one of the
formats mentioned above (if so which one) - or select the No
option. If I do select the No option at the very beginning, will I
have problems with my site uploading and working correctly?
Thank you
Travis

OO ALV validation check without event DATA_CHANGED and results via popup

Hi Gurus,
I'm working on SAP ECC 6.0 and I'm facing a problem during the ALV validation check. My requirement is to show an ALV with one editable field. In addition I have to pre-initialize this field in order to give a reference value to the user, but this is not always correct, or better, this field represent the maximum amount available, but, because of other validation checks, this field is not always correct (and it's ok, it's not a problem), and if it is greater than another amount I have to display an error.
I was thinking about catching the event DATA_CHANGED and do the checks inside of it. It works but not completely, because if the user do not change anything the event is not raised and I cannot do my checks.
My solution is to do the checks without catching the DATA_CHANGED event and display the errors in a separate popup window.
The checks are ok, but I have problems during the displaying of the results: I would like to use the class CL_ALV_CHANGED_DATA_PROTOCOL in order to display the errors, I tried creating the Object:
Data: go_Error Type Ref To CL_ALV_CHANGED_DATA_PROTOCOL.
Create Object go_Error
    Exporting
*      i_container =
      i_calling_alv = go_0200_Alv
giving it a reference to the ALV (the go_0200_Alv is my CL_GUI_ALV_GRID object).
Then I did many Call Methods to the Add_Protocol_Entry to add the message in the protocol and then display them calling the Display_Protocol Method of my "go_Error".
The Popup is shown and the "links" to the ALV are correct (if I double click a message it selects the corresponding row of the ALV, but (and it's my problem) I cannot see the Description of the Column with the error: the popup window is an ALV grid itself with 3 columns ("Message Type", "Name of the Column" and "Message Text") where I can see correctly the Message Type and the Message Text but not the name of the column.
Debugging the code I found that If I catch the event, the parameter er_Data_Changed (the class CL_ALV_CHANGED_DATA_PROTOCOL) is filled with some other informations like Modified Rows and other attributes like FieldCatalog, Row-ID, so I thought the problem was related to that, and that's why I replicated the whole case in my processing, filling every table I would see if I use the "standard way" for validation. Bu it didn't correct the error. I still don't see the name of the Column.
This is my code, it's only the part interested, If you need other informations, please ask me and I will copy them.
form CHECK_ALV_0200_0110 Changing pc_Error Type Char01.
Data: lt_MatchK1 Type tp_Matches1_Key_t,
        l_Message Type Char100,
        l_MessX    Type String,
        l_QtaRes   Type ZDM_AMT_ASSIGNED,
        l_QtaAcc   Type ZDM_AMT_ACCRUED,
        l_QtaStep Type ZDM_AMT_ASSIGNED.
Field-Symbols: <fs_Table>    Type Standard Table,
                 <fs_Master>   Type Standard Table,
                 <fs_Mod_Cell> Type LVC_S_MODI,
                 <fs_Line>     Type Any,
                 <fs_Field>    Type Any,
                 <fs_Any>      Type Any.
Data lt_Matches_Alv_Mod Type tp_Matches1_Alv_t.
Data ls_Modi Type LVC_S_MODI.
Data: l_Row_ID Type I,
        l_Tabix Type I.
Field-Symbols: <fs_Match_ALV> Type tp_Matches1_Alv_s.
Free go_Error.
CREATE OBJECT go_Error
    EXPORTING
*      i_container =
      i_calling_alv = go_0200_Alv
* Validation Checks
Clear pc_Error.
Clear ls_Modi.
Loop At gt_Matches1_Alv Assigning <fs_Match_ALV>.
    l_Tabix = Sy-Tabix.
    Check <fs_Match_ALV>-Status Eq con_Status_Temp.
*   Set the Modified Row for the CL_ALV_CHANGED_DATA_PROTOCOL object
      Append <fs_Match_ALV> To lt_Matches_Alv_Mod.
      Add 1 To ls_Modi-Row_Id.
      ls_Modi-FieldName = 'AMT_DEDUCTED'.
      Write <fs_Match_ALV>-Amt_Deducted To ls_Modi-Value Currency <fs_Match_ALV>-Waers.
      Condense ls_Modi-Value No-Gaps.
      ls_Modi-Tabix = l_Tabix.
      Append ls_Modi To: go_Error->mt_Mod_Cells,
                         go_Error->mt_Good_Cells.
      l_Row_ID = ls_Modi-Row_Id.
    Clear l_Message.
    If <fs_Match_ALV>-Amt_Deducted Eq 0.
      pc_Error = con_X.
      CALL METHOD go_Error->Add_Protocol_Entry
        EXPORTING
          i_msgid     = 'ZDMV'
          i_msgty     = 'E'
          i_msgno     = '005'
*          i_msgv1     =
*          i_msgv2     =
*          i_msgv3     =
*          i_msgv4     =
          i_fieldname = 'AMT_DEDUCTED'
          i_row_id    = l_Row_ID
*          i_tabix     =
      Continue.
    EndIf.
    Case g_Dynnr.
      When '0110'.
        Perform Get_ResQtaDispute1 Using lt_MatchK1
                                         <fs_Match_ALV>
                                   Changing l_QtaRes.
        Perform Get_ResQtaAccrued1 Using <fs_Match_ALV>
                                   Changing l_QtaAcc.
*      When '0111'.
*        Perform Get_ResQtaDispute2 Using lt_MatchK2
*                                         <fs_Match_ALV>
*                                   Changing l_QtaRes.
*        Perform Get_ResQtaAccrued2 Using <fs_Match_ALV>
*                                   Changing l_QtaAcc.
    EndCase.
    Add <fs_Match_ALV>-Amt_Deducted To l_QtaStep.
    If l_QtaStep > l_QtaRes.
*     Store the Error
      pc_Error = con_X.
      Write l_QtaRes To l_Message Currency <fs_Match_ALV>-Waers.
      Condense l_Message No-Gaps.
      CALL METHOD go_Error->Add_Protocol_Entry
        EXPORTING
          i_msgid     = 'ZDMV'
          i_msgty     = 'E'
          i_msgno     = '002'
          i_msgv1     = l_Message
*          i_msgv2     =
*          i_msgv3     =
*          i_msgv4     =
          i_fieldname = 'AMT_DEDUCTED'
          i_row_id    = l_Row_ID
*          i_tabix     =
    EndIf.
    If l_QtaStep > l_QtaAcc.
*     Store the Error
      pc_Error = con_X.
      Write l_QtaAcc To l_Message Currency <fs_Match_ALV>-Waers.
      Condense l_Message No-Gaps.
      CALL METHOD go_Error->Add_Protocol_Entry
        EXPORTING
          i_msgid     = 'ZDMV'
          i_msgty     = 'E'
          i_msgno     = '002'
          i_msgv1     = l_Message
*          i_msgv2     =
*          i_msgv3     =
*          i_msgv4     =
          i_fieldname = 'AMT_DEDUCTED'
          i_row_id    = l_Row_ID
*          i_tabix     =
    EndIf.
EndLoop.
If pc_Error Eq con_X.
*   If there was at least one error, Display the Popup
    go_Error->mt_FieldCatalog[]   = gt_0200_FCat[].
    go_Error->ms_Layout-Zebra     = con_X.
    Get Reference Of lt_Matches_Alv_Mod[] Into go_Error->Mp_Mod_Rows.
    CALL METHOD go_error->display_protocol
*      EXPORTING
*        i_container        =
*        i_display_toolbar =
*        i_optimize_columns =
EndIf.
EndForm.
Do you know if there is a particular issue about that? Or, maybe, I'm doing something wrong...
Please help me
Regards,
Claudio
Edited by: Claudio Distrutti on Oct 31, 2008 12:38 PM

Hello Claudio
Nobody prevents you from calling your event handler method go_grid->HANDLE_DATA_CHANGED directly!
What do I mean with that?
I assume you are calling method go_grid->CHECK_CHANGED_DATA at the beginning of the PAI module to catch any changes from the editable ALV grid. Within the event handler method you do your validation and send the error popup if necessary.
Now when the user closes the error popup and pushes e.g. the SAVE button then I can happen that method HANDLE_DATA_CHANGED does not trigger event DATA_CHANGED because nothing was indeed changed on the ALV grid. Yet the invalid value is still there.
However within the FORM routine for saving the data you can just call your event handler method directly:
FORM save_data.
CALL METHOD go_grid->handle_data_changed
    EXPORTING
*      er_data_changed =
      e_ucomm = 'SAVE'.
ENDFORM.
Now within your event handler method you always know when the method was called because if method CHECK_CHANGED_DATA triggers event DATA_CHANGED the IMPORTING parameter ER_DATA_CHANGED is bound whereas it is empty when the method is called from your SAVE routine.
METHOD handle_data_changed.
DATA: lo_log   TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
    IF ( er_data_changed IS BOUND ).
      lo_log = er_data_changed.
    ELSE.
      CREATE OBJECT lo_log.
    ENDIF.
" Do the validations and send error log if necessary
lo_log->DISPLAY_PROTOCOL( ).
ENDMETHOD.
Regards
Uwe

PHP MySQL database

How to send a number count to the PHP MySQL database everytime a details page is opened from the results page?

Assuming your DB table named 'stats' has fields for article_id, hits and the article id is passed to the detail page through the URL parameter article_id then your query would look like this:
mysql_select_db($database_XXXXXX, $XXXXXX);
if (isset($_GET['article_id'])) {
$article_id = $_GET['article_id'];
$query_hits = sprintf("UPDATE stats
SET hits = hits+1
WHERE article_id = %s", GetSQLValueString($article_id, "int"));
$hits = mysql_query($query_hits, $XXXXXX) or die(mysql_error());

Problems with recordset in PHP/MySQL setting

We use Dreamweaver CS5 for creating dynamic pages (PHP pages with MySQL database). We test the site locally on a Windows 7 operating system with EasyPHP as WAMP server.
We often have a problem in managing the record set.
The following problem occurs quite often:
We take a PHP page. We create a recordset. We use a dynamic table or a repeated region to show the results of the recordset. So far so good.
Then we want to change something to the recordset for example the filter. When editing the recordset, the advanced mode is shown, it is impossible to swith to the simple mode.
By deleting the recordset the problem is not solved. By deleting and afterwards rebuilding the recordset, syntax errors occur. It seems that the php code for building the recordset didn't dissapear.
The only solutions till now seems to completely restart with a new PHP page.
Anyone has a solution for this or anyone did experience the same problem ?
Thank you very much in advance.
Ilse

You cannot switch to Simple mode in the Recordset dialog box if you have made any changes to the SQL in Advanced mode.
Opening the Recordset dialog box to edit the settings does occasionally result in the code being inserted again instead of being changed. This appears to be an intermittent bug, which I have experienced myself, and know that others have complained about it, too. As far as I know, there is no solution other than to watch carefully the code that Dreamweaver generates.
If you don't understand the code, you would be well advised to learn what it means and does. Relying on Dreamweaver to do everything for you severely limits what you can do with PHP/MySQL. Adobe regards the server behaviors as quick prototyping tools, rather than for developing production websites.

Need help with loading MySQL results into a query

Hello, I need some help figuring out why my tree component
isn't being populated with my MySQL results.
I have a table of categories:
ParentID - CategoryID - Name
Every top-level category has a ParentID of 0 (zero). I'm
using php and a recursive function to build an array of nested
results, then passing those results back to Flex, making those
results a new ArrayCollection, then assigning that to the
dataProvider of the tree.
Result: my tree component is blank
Suspicion: it has to be a way with how my array is being
formed in PHP. If I play around with how it is formed I can get
some odd results in the tree, so I know it's not a problem with the
data being passed back to Flex.
I am attaching the PHP code used to form the array, and the
output of the array being created

Why not just build xml and send it back? Xml is hierarchical
by nature.
However, if you want to stick with the nested ACs then are
you using a labelFunction() with your tree? The node values are in
different properties, so you can't just set labelField.
Tracy

Solution: Using Popup Windows in JSF Applications

URL: http://forum.exadel.com/viewtopic.php?t=559
This example shows:
* how to use a client-side script to control a form field rendered by JSF
* how to launch a popup window and return a result back to the main window
* how to use the standard JSF Navigation Framework for navigation in a multiple-windows interface environment.

It works only with latest ( jsf-ri beta ) version. EA4 used to require completely another approach to do the same.
According to diagnostic message, you have problem with running jsf-ri itself, but now with this example application.
There is a good test to examine that your environment is ready to work with jsf-ri: jsf-ri is shipped along with demo-components.war example. Try to deploy it. If it works, jsf-popup example should work also.
Perhaps, your servlet container does not with servlet-mapping like *.jsf . I met this problem couple time when play with standard jsf-ri examples. So, you can try to replace *.jsf with /faces/* and index.jsp should contain <jsp:forward page="faces/pages/inputdata.jsp" /> in this way.
Finally, I have received several request about working with WSAD 5.1 . It looks like 5.1 does not support jsf-ri applications at all. This is a link that explains the problem: http://forum.java.sun.com/thread.jsp?forum=427&thread=476773 . If somebody knows the solution let's us know, please.

Send PHP/MySQL results to popup window as HTML

Similar Messages

Maybe you are looking for