Send POST data from custom POD to PHP server

Hi all,
I tried to send data from custom POD to PHP server with POST method. I used HTTPService component and URLLoader, but nothing happend. All attempts failed, HTTPService return "fault" and URLLoader return "0" that means I can't send data to the server.
I'm googling around during few hours... please give me some advice, how I can send data from custom POD to PHP server.
Thanks

Figured it out, hope it will help someone
A bit tricky but it works fine, now I can send and retrive data from PHP server.
Add .htacces file in folder where deployed PHP request handler and modify it, see below:
RewriteEngine on
RewriteBase /foldername
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^(.*)\?*$ filename.php?_route_=$1 [L,QSA]
Thanks

Similar Messages

Can't send POST data from servlet

Hi,
I have a servlet that receives data via GET method, process the request and then it has to send feedback to an url, but the query string that
I have to send must be in a POST method.
I ilustrate this:
http://host:port/myservlet?param1=value1
myservlet proccess and then calls
http://external_url (with param2=value2 via POST)
I've tried to put an HttpURLConnection
URL url = new URL("http://localhost:7001/prueba.jsp");
java.net.HttpURLConnection con= (HttpURLConnection)url.openConnection();
//POST data
URL url = new URL("http://localhost:7001/prueba.jsp");
HttpURLConnection c = (HttpURLConnection)(url.openConnection());
c.setDoOutput(true);
PrintWriter out = new PrintWriter(c.getOutputStream());
out.println("param2=" + URLEncoder.encode("value2"));
out.close();
but I get this error.
lun mar 10 13:53:46 GMT+01:00 2003:<W> <ListenThread> Connection rejected: 'Login timed out after 5000 msec. The socket
came from [host=127.0.0.1,port=2184,localport=7001] See property weblogic.login.readTimeoutMillis to increase of decreas
e timeout. See property weblogic.login.logAllReadTimeouts to turn off these log messages.'
(it's a weblogic 5.1 problem, i've been researching a little bit)
And I don't want to call a jsp that generates a post form, and then it's auto-submitted with javascript. (this will be the last remedy!!)
How can i do this?
All suggestions will be grateful.
Thanks in advance.
PD: sorry for my english :)

I make an URLConnection and I intended to know if the post data was
sent right. Then, in my machine, under weblogic 5.1, I developed a jsp with this code:
<%
URL url = new URL("http://machine2/examples/prueba.jsp");
HttpURLConnection c = (HttpURLConnection)(url.openConnection());
c.setDoOutput(true);
PrintWriter outd = new PrintWriter(c.getOutputStream());
outd.println("param1=" + URLEncoder.encode("value1"));
outd.close();
c.disconnect();
%>
and in machine2 (using tomcat 4.1), I simply put a line in prueba.jsp:
System.out.println(request.getParameter("param1"));
and I don't get "value1" in the tomcat log as expected (I think).
I also tried with adding this properties:
c.setRequestProperty("Content-Length", size...);
c.setRequestProperty("Content-Type", "application/x-www-form-urlencoded");
and it didn't work!
what's wrong?

Best approach to synchronize data from custom application database to EBS

Hi All,
We have requirement to synchronize data between custom application database and EBS database. Thw two database is on different location connected by 128 kbps connection.
The synchronization will do the following task :
- Download customer table from EBS (I have checked there are only 2000 rows of it)
- Up load billing data to EBS auto invoice interface table
The question is :
What approach is the best way to do this synchronization task ? some that come into my mind :
- create database link and run stored procedure to do the batch update ?
- for Customer synchronization, is it a good idea to create Materialized view so that any update to EBS customer data will be updated, refreshed nightly
- or is ther any better approach ?
Thank you very much,
xtanto

Hi,
There are two direction of synchroonization that should be done :
- RECEIVE Customers data from EBS into Custom Billing Database -> Yes, this can be done via materialized view
- SEND Billing data from Custom Billing Database into EBS database (Interface table)-> this cannot be done with materialized view
--> so how is the best way to do this under limited bandwidth (128 kbps) ?
Thank you very much,
xtanto
Edited by: xtanto on Oct 19, 2008 1:52 PM

Sending post data to remote site

I would normally use CURL and php to do this but I was wanting to see if i can use flex to send the post data, I am making an app which sends post data to another site, and was wanting to know the best way of doing this in flex..

ok cool, I basically need to be able to prepopulate any form from any website and submit it, even if the site doesn't have an API.
the sites I am submiting to all have API's but I thought it would be better this way because API's change alot.

How can I send registeration data from Mac machine to NT machine?

How can i send or post data from Mac machine to NT machine without using browser? I m stucked. I want to register a customer from Mac machine by a container i.e. Form having awt components etc. and send it to NT machine to trigger it into SQL Server. Can i use Servlet for this purpose? The problem is client machine have Mac and no browser. But host machine is NT based.

Thanks !
I have got that one. But its documentation API describes very little information. I could not properly follow. if there is some help to start up in HTTP client?
Can i use classes of HTTP client in my application and why i need it, I m not following as well. Please describe reply in detail.

Error while posting data from SCM to XI

Dear Expertise,
I got a requirement where I need to post data from SCM to XI server. From SCM
side it is an ABAP proxy. When I tested the scenario and checked in the MONI of
SCM I got an error. But SCM is correctly configured pointing to XI under Tcode
SM59 (SM59 --> Connection Type H (HTTP Connection to ABAP System) -->with
correct user credentials and PIPE line URL of XI server).
Please let me know is this the correct settings for ABAP proxy for connecting
from SCM system to XI system.
Error Dump in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><!DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN">
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 401 with the description Unauthorized Authorization error while sending by HTTP (error code: 401, error text: Unauthorized)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks in Advance,
Gujjeti

HI
Check these
For Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Description: The request requires user authentication
Possible Tips:
Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
If the error is in Adapter Engine
then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
May be wrong password for user XIISUSER
May be wrong password for user XIAFUSER
for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message

Send form data from Coldfusion to ASP

I need to send form data from CF to ASP.
I submit a CF page and validate it on my end with another CF
page, which then needs to post the results to an asp page on
another site. The post has to be sent via SSL and I don't need to
and cannot receive any status message back from the remote ASP
site. Any suggestions would be greatly appreciated. I was thinking
some type of cfhttp, but I am not very familiar with its usage.
Thanks!

It doesn't matter what type of page you are sending to as
long as it can handle the data that is sent. Either a form or
cfhttp will work.

Possible to send POST data WITHOUT a submit button?

Is it possible to send POST data without a submit button, but
instead, using PHP redirect or PHP header?
I need to process a form's POST values before sending some
selected values to a third party web
site. So I'd like to be able to send processed POST values to
that site, without asking the user to
click on a submit button again.
how?...
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

You can't send client-side data with server-side scripting, I
think. You
can do it with javascript, but then your form is dependent on
js being
enabled....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"(_seb_)" <[email protected]> wrote in message
news:eosqf2$p0n$[email protected]..
> Is it possible to send POST data without a submit
button, but instead,
> using PHP redirect or PHP header?
> I need to process a form's POST values before sending
some selected values
> to a third party web site. So I'd like to be able to
send processed POST
> values to that site, without asking the user to click on
a submit button
> again.
> how?...
>
>
> --
> seb ( [email protected])
>
http://webtrans1.com | high-end web
design
> Downloads: Slide Show, Directory Browser, Mailing List

How to extract data from custom made Idoc that is not sent

Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!

Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT          FIELDNAME           LENGTH
SEGMENT1         FIELD1                   4
SEGMENT1         FIELD2                   2
SEGMENT1         FIELD3                   2
Data in EDID4 would be as follows
IDOC           SEGMENT                          APPLICATION DATA
12345         SEGMENT1                        XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data.

Need to POST data from a desktop client to a server.

Hello all, it's been awhile since I've posted here, so I hope everyone has been doing well.
I have cross posted this here java - Need to POST data from a client application to my server - Stack Overflow but no answers, and since SO has been extremely slow for the questions I've been asking I am posting here.
Here is the post:
I know the title is probably a common question, but I am a bit confused on everything I'm trying to do, so I am trying to piece it together, and figured a common title would be better than a confusing one.
I am basically developing a web application and one part of that is a file uploader. I am using Apache Commons File Upload via the Streaming API, and that all works fine, except I need to access the file I'm uploading, because that contains data to additional files to upload. I.e., Read File A, get paths to images, upload images with File A to server and save on server. The API can be found here http://commons.apache.org/proper/commons-fileupload/streaming.html
I was told there is a security risk via the web and would be impossible via a browser, since the user needs to select all files to upload, i cannot tell the browser to upload additional files, so I am left with a client side option.
I am confused if there is a special library I need, or as I have been seeing threads that talk about using the built in UrlConnection Class or http://hc.apache.org/
I basically need to be able to read the file, which technically gives me a path to a Database on the user's system which I then read to get the additional images. After I get all of that I then need to post the data as a multipart form as that is what the FileUpload requires.
form method="POST" enctype="multipart/form-data" action="fup.cgi">
File to upload: <input type="file" name="upfile"><br/>
Notes about the file: <input type="text" name="note"><br/>
<br/>
<input type="submit" value="Press"> to upload the file!
</form>
This is the example found in the Overview section of the Fileupload which can be accessed from the link above.
There wouldn't be an issue if the users uploaded all of the data themselves, but since I have to do some of it automatically it causes some "concerns/issues."
Basically these files are created and packaged from another application, so the images, and the db will always be in the same place, and that file that they are uploading is a file the other program creates, so everything will always be known, I just need to upload it, and then POST it as enctype="multipart/form-data" So that my servlet can read it and save it on my server.
So I would appreciate it if anyone had any suggestions on where to begin my journey with this. I have heard of a few applications like curl and wget that are used for this, but those seem to be more C based. As mentioned earlier it seeems the httpcomponets from apache might work well, but I want to make sure.
I appreciate all the help, thank you for your time all.

It's not possible to read from a file without using classes from the core API*. You'll have to get clarification from your instructor as to which classes are and are not allowed.
[http://java.sun.com/docs/books/tutorial/essential/io/]
*Unless you write a bunch of JNI code to replicate what the java.io classes are doing.

How to send the data from mac pc to External drive

how to send the data from mac pc to External HDD
or Pen Drive but with out deleting the preview as data

You can use "Finder", which is in your dock, to copy files from your iMac folders over to the external hard drive.
Hope this helps

How can we post data from CRM to SAP using ABAP proxies???

Hi ,
Can anyone hep me to create interface for the following scenario How can we post data from CRM to SAP using ABAP proxies???, can I find any document ???????
Thanks in advance
Andy

Andy,
Please look at these weblogs.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/ravikumar.allampallam/blog/2005/03/03/creating-purchase-order-idoc-through-xi
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
These should give a good idea about implementing Proxies.
Regards,
Ravi

How to send a data from combobox to list box in java when I click datas

ow to send a data from combobox to list box in java when I click datas in combobox

use getItemAt() from combo and add them to list model.

Send encrypted data from oracle 11g to Ms SQL Server 12

Hi every body,
we want to send encrypted data from oracle 11g to Ms SQL Server 12:
- data are encrypted to oracle
- data should be sent encrypted to Ms SQL server
- data will be decrypted in Ms SQL server by sensitive users.
How can we do this senario, any one has contact simlare senario?
can we use asymetric encription to do this senario?
Please Help!!
Thanks in advance.

Hi,
What you want to do about copying data from Oracle to SQL*Server using insert will work with the 12c gateway. There was a problem trying to do this using the 11.2 gateway but it should be fixed with the 12c gateway.
If 'insert' doesn't work then you can use the SQLPLUS 'copy' command, for example -
SQL> COPY FROM SCOTT/TIGER@ORACLEDB -
INSERT SCOTT.EMP@MSQL -
USING SELECT * FROM EMP
There is further information in this note available on My Oracle Support -
Copying Data Between an Oracle Database and Non-Oracle Foreign Data Stores or Databases Using Gateways (Doc ID 171790.1)
However, if the data is encrypted already in the Oracle database then it will be sent in the encrypted format. The gateway cannot decrypt the data before it is sent to SQL*Server.
There is no specific documentation about the gateways and TDE. TDE encrypts the data as it is in the Oracle database but I doubt that SQL*Server will be able to de-encrypt the Oracle data if it is passed in encrypted format and as far as I know it is not designed to be used for non-Oracle databases.
The Gateway encrypts data as it is sent across the network for security but doesn't encrypt the data at source in the same way as TDE does.
Regards,
Mike

How to use macro to pull data from custom infotype?

Hi all,
Is rp_provide_from_last p9004 space pn-begda pn-endda. works?
i am getting all zeros .
is using macros possible pull data from custom infotype? or only select?
Regards
sas
For LDB PNPCE
get peras:

Hi,
Try the following Macro it will solve out your problem,
DEFINE rp_provide_from_last.
rp_found = '0'.
clear: rp_tabix.
loop at &1.
    if &2 ne space.
      check &1-subty eq &2.
    endif.
    if &1-begda le &4 and &1-endda ge &4.
      rp_found = '1'.
      exit.
    endif.
    if &1-begda le &4 and &1-endda ge &3.
      rp_tabix = sy-tabix.
    endif.
endloop.
if rp_found eq '0'.
    if rp_tabix ne 0 .
      rp_found = '1'.
      read table &1 index rp_tabix.
    else.
      clear: &1.
    endif.
endif.
END-OF-DEFINITION.
rp_provide_from_last <p????> space <begda> <endda>.
Best Regards,
Faisal

Send POST data from custom POD to PHP server

Similar Messages

Maybe you are looking for