Send the important Tickets
Hai Experts,
I am Searching for job on sap fico, can anybody send important ticket to mail id deleted
Thanks & Regards
Prabhakar
Edited by: prabhamallu on Dec 20, 2011 12:50 PM
Moderator: Please, search for a job on jobs board and not on SDN forums
Well they have advertized 70% of Energy Star boxes are being installed. The hardware mentioned is not energy star rated. the QIP-6xxx does not support the HD guide and has been nothing but an issue where people post time and time again about the new 1.9 guide. So as the obsolete hardware should go. The 6000 series were the first boxes to be released with the service, and the technology is over 6 years old. So yes new technology is needed to replace these boxes. The same with the 2500 SD boxes. Perhaps get rid of the QIP-6xxx DVRs and only issue the QIP-6xxx STB non DVRs for SD use, so people can get the content they pay for. The HD boxes do work on an SD TV.
Now the Silver 7100 series boxes are close to the same point and not energy star. All the Silver boxes ARE OLD!
This is a quote from the Verizon video, pointing to the silver boxes. " these boxes were not very energy effecient so very quickly within three years we migrated to these". Pointing to the newer black energy star boxes. The STBs everyone complains about are mostly these old silver boxes that are still being installed. So the QIP-6xxx at a minimum must go. The QIP-2500 have been made unavailable for quite some time.
Watch this video from Verizon. Even they say so.
http://www.youtube.com/watch?v=QogfVxtsOP8&feature=youtu.be
I agree that the cost of changing hardware is not cheap, but how long should 6 year old hardware be rotated in and out of service? They should well be paid for by now.
Similar Messages
-
Let suppose I import a 30GB Aperture Library into LR which is on my HD. After the importation, if I send the imported library to the Trash and clear the Trash the disk space is not released by LR. So after a few importations I get the message that I do not have enough space on my HD to copy another library on the HD from an external drive which contains many Aperture libraries.
Casita17, I recommend you evaluate ssprengel's questions and advice. Please read the following below, as we don't want you to lose images! I fear that you may be using a "referenced" library in Aperture, and this is the reason your disk space is not being released. I would NOT RECOMMEND breaking your library into pieces for now. You may very likely lose critical linkages, especially in albums. If you have a number of Aperture libraries to begin with, then never mind. Just be aware, Lightroom users generally recommend using only one lightroom catalog, which it sounds like you're doing.
Lets forget your system drive for now. Do you have two times the disk space on your photos drive? If not, do you have another drive laying around with as much space? I recommend you make a backup before you continue.
I'm not quite sure what approach your are using, but I think the root cause of your dilemma exists because of how Aperture and Lightroom manage and store your images. It may help to post what actions you take, step by step, and include the error messages.
You may already know some of these concepts, but lets leave no stone unturned.
First, Aperture uses "libraries", which contain all metadata and previews. These images may be stored within the database (managed images), outside the database (referenced images), or a combination. Can you apply a filter to your all photos selection, and tell us how many managed and references images you have?
Please read this for a better explanation:
http://www.lifeafterphotoshop.com/managed-vs-referenced-files-in-aperture/
Second, Lightroom's catalog is like an Aperture library. Only ALL images are stored externally, "referenced" in Aperture parlance.
You should be able to create the Lightroom Catalog on any drive. However, where you eventually store your images depends on what options you choose in the plugin when importing these images.
Any "managed" photos in Aperture WILL BE copied to the location you specify in the plugin. Any "referenced" files MAY OR MAY NOT BE copied to the location. They may be copied, or they they may remain in place, depending what options you select in the plugin.
Not sure I follow where you have your aperture library, images, and where you eventually want to store your Lightroom catalog, and where you want to store your lightroom images. I'd suggest not breaking up your Aperture library.
If you are short on disk space, I suggest making a backup. Then, select all photos and change them from managed to referenced, which will relocate the photos from within the library, to outside the library, preferably on the same drive. Then, create a Lightroom catalog, wherever you have room.
Run the plugin and choose the option NOT to copy the files. This way, it will leave them in place on your photo drive. Some images may be copied to the lightroom masters destination any way, so you may want to choose another location on your photo drive in the plugin import options anyway.
When the migration finishes, you can delete the Aperture library, which will not remove all that much, and will not make much more space available. And do NOT delete the image location you designated in Aperture, because you'll now be using it for Lightroom. But this way, you'll be able to keep your space usage under control.
But KEEP your backup, even after the migration, JUST IN CASE! -
Hello,
I am very new to powershell and I have been looking for a solution where I can list all the inactive members more than 30 days from particular groups in AD, export the updated list to a csv file and send the file by email . . Can someone help me on
this?
thanksHi,
Take a look at Get-ADGroupMember, Get-ADUser, Export-Csv, and Send-MailMessage:
http://ss64.com/ps/get-adgroupmember.html
http://ss64.com/ps/get-aduser.html
http://ss64.com/ps/export-csv.html
http://ss64.com/ps/send-mailmessage.html
Let us know if you have any specific questions.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
Premiere Pro not sending files to After Affects "The importer reported a generic error"
Hi all,
I just recently purchased PP & AE CC. putting together my first project on my new laptop and when i go to right click a clip on my Premiere pro timeline and proceed to push "Replace with after effects composition" It swaps to After Effects but nothing loads, i alt tab back to Premiere and it displays me the message "The importer reported a generic error"
If it's any help the footage is from my A7S filmed in SDXC format. everything works fine within the project. I've tried logging out and in of my adobe account updating restarting etc. had no luck.Hi Brandon,
ascarib wrote:
After doing the reboot my computer gives me the "You can't use this version of the application "Adobe After Effects CS6" with this version of OS X. Nothing has changed on my computer but it was fine before. What else can we try? Thank you for your patience.
Make sure that you update After Effects: Can't launch | Mac OS X 10.9 (Mavericks)
Thanks,
Kevin -
SD Questions Please Send The Answers
Hai
Here i have attached some SD Interview Questions .Please Send the Answers .
Awaiting For Ur Replay - Please Mail Me [email protected], And [email protected]
Thanks
S.Siva
1. Five steps of implementation with full details.
2. What is ticket? Process flow ticket?
3. What is ticketing tool? What is SODA?
4. How to stop PGI?
5. Details about SLS.
6. Details about the Gap analysis. (What are the gaps you have faced?)
7. What is meant by landscape? (Landscape of your project for example)
8. In which scenario we go for different pricing procedure at orders and billing?
9. Cut over activity means what?
10. In real-time project, how many pricing procedures to be used?
11. What are the tools used to communicate with the client?
12. Any three major issues faced in the support project?
13. Difference between SD account key and FI account key?
14. How to post goods receipt from storage location to warehouse? What is the movement type?
15. Tcode for listing blocked documents?
16. What is the advantage of using the text as reference instead of duplicating it?
17. Have you ever applied BPR (Business Process Reengineering) in an implementation project?
18. To perform material configuration, which system one has to use in landscape?
19. What is the tcode for creating number range for a sales order type?
20. Difference between centralized credit mgmt and decentralized credit management.
21. Where do u configure in development server or application server or in testing server?
22. Details about clients.
23. What is an abap query? Why it is used?
24. What are the steps for end user training in sap SD module?
25. Difference between discount and rebate.
26. When is material determination got triggered?
27. A customer wants to buy two materials / one is 3rd party material (Item category: TAS) / another one is normal material (Item category: TAN). His requirement is he wants a single invoice for both items without splitting? How can we do this?
28. In consignment fill up, we deliver goods to customer site, is there any agreement with customer? If yes means, what type of agreement relating price?
29. Details about VAT configuration.
30. What is the use of pricing date in condition type?
31. In R/3, we represent a companys structure by defining and assigning corporate structure elements. What is the purpose of doing that?
32. What are the different partner functions can a customer master record serve?
33. What is the difference between condition type EK01 and EK02?
34. What is retroactive billing? Who will create that?
35. In your functional role, how you gather technical specifications for your technical team members from your client?
36. Is it possible to change existing item categories?
37. For cash sale, how will availability check be done?
38. How is the access sequence controlled?
39. User specific parameter means what? How to create that one?
40. What is the difference between listing and exclusion?
41. Difference between customization and configuration.
42. How to customize rebate processing in sap sd?
43. LSMW important step is what?
44. What is the extract used in condition technique of pricing?
45. Can we create credit management separately for two different materials?
46. Work center means what?
47. If the client logon screen deleted while requirement is urgent, then what to do?
48. What is meant by time bond deliveries?
49. After implementing sap in production environment, while creating sales order, client wants to give discount for first 10 sales orders? How to do this?
50. What are the Three different kinds of messages? What is the difference between them?
51. Details about testing at sap sd.
52. What is the access sequence for header conditions?
53. Details about actual GI date and planned GI date .Can actual GI dt differ from planned GI dt?
54. Influencing factors for account determination for invoices.
55. Details about sap best practices.
56. To start a transaction, how many ways are there? And what are they?
57. Who will create transportation request?
58. In realization phase, what will be doing?
59. Is it possible to release change request without releasing task?
60. Details about lean warehouse management.
61. How to customize excise duty, insurance and cess condition type in pricing procedure?
62. How to stop PGI?
63. Data dictionary or repository means what?
64. How do you transfer request from development instance to production or quality instance?
65. What is the importance of release status in condition table?
66. Why does account group controls customer?
67. What are the deliverables in your blue print?
68. If you generate bill more than credit limit, then what will happen?
69. What is the value class used for material creation?
70. Why do we maintain sales office?
71. Is it possible to substitute one product for another? If so, how it can be achieved?
72. What is the difference between ATP check and availability check? How these reflect in sales order?( Which check system considers) what are the img steps for the same?
73. Explain process and steps involved in returns third party order processing.
74. What is the client specific data? Give 2 examples of client specific data.
75. What is the most critical field in delivery document?
76. What is the relation between sap sd and ABAP?
77. What is the functionality of negative posting in billing document?
78. In real time, when we start system in first, what screen we get and tell me the process how to log on screen? (IBM question)
79. How can you check in sap system, how, when and by whom, which fields in the customer master record were changed?
80. What is variant and its configuration?
81. After logging into R/3 system, if you want an end user to see a specific menu . How could you do that?
82. Is it possible to automate output processing?
83. Which data is relevant for crediting credit and debit memos?
84. In system landscape, where the sandbox and golden box client exists?
85. What is the user exists? /how can we create user exists? What is the purpose of that?
86. Details about value sap.
87. Is there any difference between product selection and material determination?
88. How do you transfer request from development instance to production or development instance?
89.What part of the company is responsible for the type of shipping, the necessary shipping materials and the means of transport?What is ticket? Process flow ticket
Handling tickets is called Issue Tracking system. The errors or bugs forwarded by the end user to the support team are prioritized under three seviority High, Medium and Low. Each and every seviority as got its time limits before that we have to fix the error.
The main job of the supporting consultant is to provide assistance on line to the customer or the organisation where SAP is already implemented for which the person should be very strong in the subject and the process which are implemented in SAP at the client side to understand,to analyse,to actuate and to give the right solution in right time.This is the job of the support consultant.
The issues or the tickets(problems) which are arised is taken care of on priority basis by the support team consultants.
The work process in support projects are given below for your reference.
1. The customer or the end user logs a call through any tool or by mail (RADIX).
2. Each one of the support team is a part of support group.
3. Whenever a customer logs a call he /she has to mention to which work group (by name).
4. Once the calls came to the work group the support consultant or the team need to send an IR (Initial Response) to the user depending upon the priority of the calls. (Top,High,Med,Low,None)
5. Then the error is fixed, debugged by the support consultant or the team. Then after testing properly by generating TR(Transport Request through the basis admin)
6. Then it is informed to the end user/customer/super user about the changes which have moved to the production server by CTS process.
These are the process. In summary, what I understand is that if any configuration or customization is required to solve the issue, then the consultant have to work on DEV Client, then the end user will test it in the QA client and after approval the BASIS consultant has to transport it to the PRODUCTION client.
An example:
Tickets in SD can be considered as the problems which the end user or the employee in the company face while working on R/3. Tickets usually occur during the implementation or after theimplementation of the project. There can be numerous problem which can occur in the production support and a person who is working in the support has to resolve those tickets in the limited duration, every ticket has the particular deadline alert so your responsibility is to finish it before that deadline.
To begin with , we should give "TICKET" to you for not knowing it.
Here is an eg of a ticket raise:
End user is not able to
1. Create Sales order for a customer from a New plant , since shipping point determination is not happened . ( Without Shipping point the document becomes INCOMPLETE and he will not be able to proceed further like DELIVERY, BILLING).
He raises a ticket and the priority is set in one of the below:
1. Low 2. Medium 3. High.
Now you need to solve this ticket. You would analyze the problem and identify that the SP configuration has to be done for the new plant.
You would request a transport for DEV CLIENT to BASIS. You do the change and Request one more Transport to BASIS for QA client. The End user will test the same by creating a sales order for the new plant and approve it.
Finally, you request a transport to move the changes to PRODUCTION. Once the change is deployed in production the TICKET is closed. What I have given is a small example. You would get some real issues with severity HIGH in your day-day support.
Regards. -
Pls send me Importent Basis R/3 FAQ's
Hi,
interview purpuse pls send me important Basis Faq's and also pls send me realtime scenarios .If you help I will give more reward points.and also if possible give answers also.
regards,
janaHi,
Search SAP.com FAQ.
1. What is SAP MMC good for?
a) Starting SAP instances
b) Viewing developer traces
c) Stopping SAP instances
d) Deploying SAPGUI
ANSWERS: A, B and C
The SAP MMC has multiple uses. Among them: starting/stopping instances and viewing/analyzing the developer traces (dev_disp, dev_ms, dev_w*).
Ignore the myths -- the reality is that SAP MMC can be installed on remote computers to manage SAP instances the same way as if you were using the actual SAP server. Find the SAP MMC installation components on the SAPGUI CD.
2. The following is true about Kerberos single sign-on (Kerberos 5 SSO):
a) It's only supported in UNIX environments
b) It provides encrypted authentication
c) It works in all Windows platforms
d) It's an SAP add-on available as of Web AS 6.10
ANSWERS: B
Kerberos is available in UNIX and Windows platforms. However, it only works with Windows 2000 and Windows Server 2003 Active Domain Controllers. Windows NT is not suitable for Kerberos 5. It provides encryption, which makes it a better option than regular Secure Single Sign-On. Kerberos SSO has been available since R/3 3.1x.
3. True or False? Since the release of SQL Server 2000, database integrity checks -- and DBCC CHECKDB in particular-- are a thing of the past in SAP.
a) True
b) False
ANSWERS: B
False! DBCCs (checkcatalog and checkdb) are definitely required and they should be performed on a regular basis.
4. What does report RSUSR003 do?
a) Lists logon system settings
b) Reports if passwords for SAP* accounts have not changed
c) Reports if passwords for DDIC are trivial
d) All of the above
ANSWERS: D
Report RSUSR003 lists all logon system settings and it reports if passwords for accounts SAP*, DDIC, SAPCPIC and EARLYWATCH are trivial. That is, the system will report the passwords for those accounts that have not been changed from the delivered ones. This is a handy report SAP auditors frequently ask for it immediately when doing an SAP audit
5. To prevent the use of common password combinations, a system can be set up to include:
a) A list of forbidden passwords in table USR40
b) Instance profile parameter "login/min_password_digits"
c) A list of forbidden passwords in table USR04.
d) No additional configuration, as SAP only allows complex passwords.
ANSWERS: A, B
To avoid this problem, populate Table USR40 with forbidden or illegal passwords combinations. Also, as of Web AS 6.10, instance profile parameter "login/min_password_digits" can be set to a value >= 1 to force users enter at least one digit in their password.
6. After a new installation of R/3 Enterprise, the system has a temporary license. How long does this license last?
a) Four months
b) Four weeks
c) Four days
d) Fourteen days
ANSWERS: B
This temporary license lasts up to four weeks. After that, nobody can log into the system except SAP. Therefore, users must request a permanent license at the early stages of an installation.
7. What is CUA?
a) It's the Control Upgrade Administration program, used during an SAP upgrade.
b) It stands for Central User Administration, where a central client manages all user accounts.
ANSWER: B
Central User Administration (CUA) was introduced in R/3 4.6 to provide a mechanism that allows central user management. Once configured, all user accounts are managed from a central client
. To prevent having to adjust output devices (e.g. print queue definitions) in every system each time they are transported from one system to another, an administrator can:
a) Set up a logical spool server by the same name in the source system and the target systems
b) Set up all printers to use "__DEFAULT" as the host printer
ANSWER: A
A logical spool server mapped to the real spool server can solve this problem by adjusting output devices after importing them.
For example, logical spool server "logicalspooler" can be set up in the customizing, quality assurance and production systems; printers get assigned to this spool server and they get transported. Because "logicalspooler" exists on the target systems, there is no need to change anything after the transport is imported.
9. True or False? In order to read developer traces, you have to go the operating system, because SAP does not have a way to do this within the application.
a) True
b) False
ANSWER: B
False! SAP provides transaction ST11 for this purpose. ST11 can even sort the trace files by date and time.
10. How can the logon screen be modified to include informational text, such as the company name, address, the system role, etc.?
a) Run transaction SE61, create object ZLOGIN_SCREEN_INFO and enter the desired text.
b) Ask SAP to modify the logon screen for you.
c) Using a C or C++ recompile SAPGUI.exe with the new text.
ANSWER: A
As of SAP version 4.6, transaction SE61 can be used to create object ZLOGIN_SCREEN_INFO. Text and icons can be added to messages that can appear at the logon screen.
11. True or False? MS-SQL Server can be installed using all the delivered default settings. Everything is controlled within the application, so SAP requires only a database engine to work.
a) True
b) False
ANSWER: B
False! MS-SQL Server needs to be configured with binary sort order and 850 multilingual character set. Therefore, using all defaults during a SQL Server installation will not work. The SAP installation program will fail.
12. What SAP transaction can assist in detecting I/O bottlenecks?
a) ST22
b) ST06
c) OS06
d) ST10
ANSWER: B, C
Either ST06 or OS06 can monitor disk I/O. These transactions are very convenient, as you do not have to go to the OS level. On the other hand, tools at the OS level may offer a more detailed analysis (e.g. Performance Monitor in Windows).
13. What does transaction SPAM do?
a) It configures the system to block spam e-mail in the business workplace.
b) It defines and import support package queues.
c) It displays the support packages that have been imported into the system.
d) Nothing. It's not an SAP transaction.
ANSWER: B, C
Transaction SPAM not only lists the support packages that have been imported into the system, but it also defines queues of support packages that can be imported. It's also the transaction that carries out the import.
14. If an SAP instance does not start after making changes to the instance profile via RZ10, what is the best course of action?
a) Restore the database from the last full backup
b) Edit the profile at the operating system level and manually change it back to the way it was. Then, restart the instance and correct the problem via RZ10.
c) Copy the instance profile from a working system into the affected system. d) Log a trouble ticket at the SAP Support Portal
ANSWER: B
In an emergency, the best thing to do is to manually edit and correct the problem in the instance profile (located under usrsapsysprofile). After successfully restarting the instance run RZ10 and correct the problem there. Save and activate the profile. If possible restart the instance right away and make sure everything works. Otherwise, plan on keeping a close eye on the instance the next time it restarts.
Restoring the database from a full backup will erase all the work done since the backup ended to the moment the problem occurred. Copying the instance profile from another system is a bad idea. The profiles are unique and contain hard coded values. Logging a trouble ticket is not necessary unless you cannot absolutely bring the system back up.
15. Which of the following are possible ways to display the R/3 Kernel patch of a system?
a) Run SM51 and click Release Notes
b) Run disp+work version at the OS level
c) Run SPAM, choose Imported Support Packages and click Display
d) Run SQ01 and click Kernel Patches
ANSWER: A, B
Within SAP run SM51, click Release Notes, and then read the line that says "Kernel Patch number." At the OS level, change it to the:
usrsapsysexerun directory and run dispwork version or dispwork V
Also, look for the "kernel patch number" line.
Useful UNIX SAP Commands.
Basic UNIX commands
Note: not all of these are actually part of UNIX itself, and you may not find them on all UNIX machines. But they can all be used on turing in essentially the same way, by typing the command and hitting return. Note that some of these commands are different on non-Solaris machines - see SunOS differences.
If you've made a typo, the easiest thing to do is hit CTRL-u to cancel the whole line. But you can also edit the command line (see the guide to More UNIX).
UNIX is case-sensitive.
Files
ls --- lists your files
ls -l --- lists your files in 'long format', which contains lots of useful information, e.g. the exact size of the file, who owns the file and who has the right to look at it, and when it was last modified.
ls -a --- lists all files, including the ones whose filenames begin in a dot, which you do not always want to see.
There are many more options, for example to list files by size, by date, recursively etc.
more filename --- shows the first part of a file, just as much as will fit on one screen. Just hit the space bar to see more or q to quit. You can use /pattern to search for a pattern.
emacs filename --- is an editor that lets you create and edit a file. See the emacs page.
mv filename1 filename2 --- moves a file (i.e. gives it a different name, or moves it into a different directory (see below)
cp filename1 filename2 --- copies a file
rm filename --- removes a file. It is wise to use the option rm -i, which will ask you for confirmation before actually deleting anything. You can make this your default by making an alias in your .cshrc file.
diff filename1 filename2 --- compares files, and shows where they differ
wc filename --- tells you how many lines, words, and characters there are in a file
chmod options filename --- lets you change the read, write, and execute permissions on your files. The default is that only you can look at them and change them, but you may sometimes want to change these permissions. For example, chmod o+r filename will make the file readable for everyone, and chmod o-r filename will make it unreadable for others again. Note that for someone to be able to actually look at the file the directories it is in need to be at least executable. See help protection for more details.
File Compression
o gzip filename --- compresses files, so that they take up much less space. Usually text files compress to about half their original size, but it depends very much on the size of the file and the nature of the contents. There are other tools for this purpose, too (e.g. compress), but gzip usually gives the highest compression rate. Gzip produces files with the ending '.gz' appended to the original filename.
o gunzip filename --- uncompresses files compressed by gzip.
o gzcat filename --- lets you look at a gzipped file without actually having to gunzip it (same as gunzip -c). You can even print it directly, using gzcat filename | lpr
printing
o lpr filename --- print. Use the -P option to specify the printer name if you want to use a printer other than your default printer. For example, if you want to print double-sided, use 'lpr -Pvalkyr-d', or if you're at CSLI, you may want to use 'lpr -Pcord115-d'. See 'help printers' for more information about printers and their locations.
o lpq --- check out the printer queue, e.g. to get the number needed for removal, or to see how many other files will be printed before yours will come out
o lprm jobnumber --- remove something from the printer queue. You can find the job number by using lpq. Theoretically you also have to specify a printer name, but this isn't necessary as long as you use your default printer in the department.
o genscript --- converts plain text files into postscript for printing, and gives you some options for formatting. Consider making an alias like alias ecop 'genscript -2 -r \!* | lpr -h -Pvalkyr' to print two pages on one piece of paper.
o dvips filename --- print .dvi files (i.e. files produced by LaTeX). You can use dviselect to print only selected pages. See the LaTeX page for more information about how to save paper when printing drafts.
Directories
Directories, like folders on a Macintosh, are used to group files together in a hierarchical structure.
mkdir dirname --- make a new directory
cd dirname --- change directory. You basically 'go' to another directory, and you will see the files in that directory when you do 'ls'. You always start out in your 'home directory', and you can get back there by typing 'cd' without arguments. 'cd ..' will get you one level up from your current position. You don't have to walk along step by step - you can make big leaps or avoid walking around by specifying pathnames.
pwd --- tells you where you currently are.
Finding things
ff --- find files anywhere on the system. This can be extremely useful if you've forgotten in which directory you put a file, but do remember the name. In fact, if you use ff -p you don't even need the full name, just the beginning. This can also be useful for finding other things on the system, e.g. documentation.
grep string filename(s) --- looks for the string in the files. This can be useful a lot of purposes, e.g. finding the right file among many, figuring out which is the right version of something, and even doing serious corpus work. grep comes in several varieties (grep, egrep, and fgrep) and has a lot of very flexible options. Check out the man pages if this sounds good to you.
About other people
w --- tells you who's logged in, and what they're doing. Especially useful: the 'idle' part. This allows you to see whether they're actually sitting there typing away at their keyboards right at the moment.
who --- tells you who's logged on, and where they're coming from. Useful if you're looking for someone who's actually physically in the same building as you, or in some other particular location.
finger username --- gives you lots of information about that user, e.g. when they last read their mail and whether they're logged in. Often people put other practical information, such as phone numbers and addresses, in a file called .plan. This information is also displayed by 'finger'.
last -1 username --- tells you when the user last logged on and off and from where. Without any options, last will give you a list of everyone's logins.
talk username --- lets you have a (typed) conversation with another user
write username --- lets you exchange one-line messages with another user
elm --- lets you send e-mail messages to people around the world (and, of course, read them). It's not the only mailer you can use, but the one we recommend. See the elm page, and find out about the departmental mailing lists (which you can also find in /user/linguistics/helpfile).
About your (electronic) self
whoami --- returns your username. Sounds useless, but isn't. You may need to find out who it is who forgot to log out somewhere, and make sure you have logged out.
finger & .plan files
of course you can finger yourself, too. That can be useful e.g. as a quick check whether you got new mail. Try to create a useful .plan file soon. Look at other people's .plan files for ideas. The file needs to be readable for everyone in order to be visible through 'finger'. Do 'chmod a+r .plan' if necessary. You should realize that this information is accessible from anywhere in the world, not just to other people on turing.
passwd --- lets you change your password, which you should do regularly (at least once a year). See the LRB guide and/or look at help password.
ps -u yourusername --- lists your processes. Contains lots of information about them, including the process ID, which you need if you have to kill a process. Normally, when you have been kicked out of a dialin session or have otherwise managed to get yourself disconnected abruptly, this list will contain the processes you need to kill. Those may include the shell (tcsh or whatever you're using), and anything you were running, for example emacs or elm. Be careful not to kill your current shell - the one with the number closer to the one of the ps command you're currently running. But if it happens, don't panic. Just try again If you're using an X-display you may have to kill some X processes before you can start them again. These will show only when you use ps -efl, because they're root processes.
kill PID --- kills (ends) the processes with the ID you gave. This works only for your own processes, of course. Get the ID by using ps. If the process doesn't 'die' properly, use the option -9. But attempt without that option first, because it doesn't give the process a chance to finish possibly important business before dying. You may need to kill processes for example if your modem connection was interrupted and you didn't get logged out properly, which sometimes happens.
quota -v --- show what your disk quota is (i.e. how much space you have to store files), how much you're actually using, and in case you've exceeded your quota (which you'll be given an automatic warning about by the system) how much time you have left to sort them out (by deleting or gzipping some, or moving them to your own computer).
du filename --- shows the disk usage of the files and directories in filename (without argument the current directory is used). du -s gives only a total.
last yourusername --- lists your last logins. Can be a useful memory aid for when you were where, how long you've been working for, and keeping track of your phonebill if you're making a non-local phonecall for dialling in.
Connecting to the outside world
nn --- allows you to read news. It will first let you read the news local to turing, and then the remote news. If you want to read only the local or remote news, you can use nnl or nnr, respectively. To learn more about nn type nn, then \tty{:man}, then \tty{=.*}, then \tty, then hit the space bar to step through the manual. Or look at the man page. Or check out the hypertext nn FAQ - probably the easiest and most fun way to go.
rlogin hostname --- lets you connect to a remote host
telnet hostname --- also lets you connect to a remote host. Use rlogin whenever possible.
ftp hostname --- lets you download files from a remote host which is set up as an ftp-server. This is a common method for exchanging academic papers and drafts. If you need to make a paper of yours available in this way, you can (temporarily) put a copy in /user/ftp/pub/TMP. For more permanent solutions, ask Emma. The most important commands within ftp are get for getting files from the remote machine, and put for putting them there (mget and mput let you specify more than one file at once). Sounds straightforward, but be sure not to confuse the two, especially when your physical location doesn't correspond to the direction of the ftp connection you're making. ftp just overwrites files with the same filename. If you're transferring anything other than ASCII text, use binary mode.
lynx --- lets you browse the web from an ordinary terminal. Of course you can see only the text, not the pictures. You can type any URL as an argument to the G command. When you're doing this from any Stanford host you can leave out the .stanford.edu part of the URL when connecting to Stanford URLs. Type H at any time to learn more about lynx, and Q to exit.
Miscellaneous tools
webster word --- looks up the word in an electronic version of Webster's dictionary and returns the definition(s)
date --- shows the current date and time.
cal --- shows a calendar of the current month. Use e.g., 'cal 10 1995' to get that for October 95, or 'cal 1995' to get the whole year.
You can find out more about these commands by looking up their manpages:
man commandname --- shows you the manual page for the command
For further ways of obtaining help, look at the pages with electronic sources of information and non-electronic sources.
More UNIX commands
Back up to the Main Computing Page
The root Directory
Command ls / this command lists the root directory
[agustin@server2 agustin]$ ls /
bin/ boot/ dev/ etc/ home/ initrd/ lib/ mnt/ opt/
proc/ root/ sbin/ tmp/ usr/ var/
Throughout the decade, developers had tried to define standards for the file system hierarchy and for what each of these directories should be used for. But even with the efforts of all these people there are still variations among all distributions.
/ root directory of the entire system
/bin holds system executables
/sbin holds system executables and are essential for starting up the system
/boot holds the files needed during the booting process including the kernel
/dev it is a special directory that holds information regarding peripherals /dev/ttys0, /dev/had, etc.
/home holds all the home directories for all users except root
/lib holds system binary libraries, shared libraries and kernel module
/opt here is where optional applications might go
/root this is the home directory for super user, do not confuse this folder with /
/tmp Here is where temporary files are stored; it is usually emptied when systems restart.
/var is where variable system files go, system logging, file locks, printer Spooling, mail spooling and many others.
/etc This directory holds almost all configuration files. As administrator you will spending most of your time tweaking settings in this folder.
/initrd this directory is used at boot time, in the initrd to perform pivot_root
/mnt This directory is used as a mount point. Here you can temporarily mount medias such as CD-ROM, zip and other file systems. Example: /mnt/windows, /mnt/floppy, mnt/cd-rom
/proc this directory is used as a kernel information access hooks, example of usage:
[agustin@server2 proc]$cat cpuinfo
[agustin@server2 agustin]$cat filesystems
/usr It is a very large directory, holds application programs; it also has several important additional directories.
/usr/bin contains binaries executables
/usr/include This directory contains C headers with various libraries applications.
/usr/local application programs used locally
The Print working directory command: pwd
[agustin@server2 agustin]$ pwd
/home/agustin
[agustin@server2 agustin]$
The command whoami, displays who you are at the current prompt
[agustin@server2 agustin]$ whoami
agustin
[agustin@server2 agustin]$
If you want to know who is logged into the entire system use the who command
[agustin@server2 agustin]$ who
agustin vc/1 Aug 17 07:38
root vc/2 Aug 19 06:51
user1 vc/3 Aug 19 06:46
[agustin@server2 agustin]$
Switching from regular user to root
To gain root's power temporarily use: su
[agustin@server2 agustin]$ su
Password:******* (when you are typing the password, you can not see it)
[root@server2 agustin]# whoami
root
[root@server2 agustin]#
Observe your prompt, it has been changed. When you are in this mode you can do anything; be careful how you use the super user account. Protect the root account at all cost.
The root account is strictly used for system administration. Any regular user cannot do things that are strictly for root unless root grants the right to the user. -
Problen when Sending the text file as attachment to the external mail
HI,
I am sending the text file as an attachment to a aexternal mai. mailing is going with text file attachment, but text file is empty. No information in the file is going, only empty text file is going. I am sending the code iam using. Please suggest, if I need to change any passing parameters orany other other solution.
tables: knb1,kna1,adr6,ITEMSET,bsid,TSP01.
INTERNAL TABLES
DATA: BEGIN OF it_kna1 occurs 0,
KUNNR LIKE KNA1-KUNNR,
ADRNR LIKE KNA1-ADRNR,
END OF it_kna1.
DATA: BEGIN OF it_email occurs 0,
ADDRNUMBER LIKE ADR6-ADDRNUMBER,
SMTP_ADDR LIKE ADR6-SMTP_ADDR,
END OF it_email.
DATA: BEGIN OF it_bsid occurs 0,
KUNNR LIKE BSID-KUNNR,
BUKRS LIKE BSID-BUKRS,
END OF it_bsid.
DATA: BEGIN OF it_final occurs 0,
KUNNR LIKE KNA1-KUNNR,
ADRNR LIKE ADR6-ADDRNUMBER,
EMAIL LIKE ADR6-SMTP_ADDR,
END OF it_final.
DATA: BEGIN OF BUFFER OCCURS 10000,
TEXT(255) TYPE C,
END OF BUFFER.
data:xtext type solix_tab." occurs 0 with header line."line.
data:xi_pdf type soli_tab.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE,
OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE,
OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,
RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE,
DOC_CHNG LIKE SODOCCHGI1,
PARAMS LIKE PRI_PARAMS,
ARPARAMS LIKE ARC_PARAMS,
DAYS(1) TYPE N VALUE 8,
COUNT(3) TYPE N VALUE 1,
VALID TYPE C,
RECEIVER(30),
STR(256).
data: spoolid type tsp01-rqident,
pdf_table like tline occurs 0 with header line,
v_bytecount type i,
itab_pdf like tline occurs 10 with header line,
xi_pdf like tline occurs 0 with header line,
xi_pdf like buffer occurs 0 with header line,
xi_pdf_1 like xi_pdf,
v_length(2) type p,
html like solisti1 occurs 0 with header line,
xi_temp like bapiqcmime occurs 0 with header line,
xi_mime(255) type c occurs 0 with header line.
VARIABLES
data: g_email type adr6-smtp_addr,
TAB_LINES LIKE SY-TABIX,
G_FLAG(1) TYPE C.
g_norm(1) TYPE C,
g_shbv(1) TYPE C,
g_merk(1) TYPE C,
g_park(1) TYPE C,
g_apar(1) TYPE C.
data: l_lines type i,
line1 type i,
l_temp(500) type c,
l_offset type p,
l_lineslen(2) type p,
l_mimelen(2) type p,
v_spono like tsp01-rqident,
l_tabix like sy-tabix.
*****VIA SELECTION-SCREEN
ENDFORM. " SEND_TO_SPOOL
*& Form GET_SPOOL_ID
*& Form CONVERT_SPOOL_TO_PDF
*& Form SEND_MAIL
FORM SEND_MAIL .
data:l_lin like sy-tabix,
l_lint like sy-tabix,
it_list like abaplist occurs 0,
l_newline(2) type x value '0D0A'.
*--Data for the status output after sending
data: user_address like sousradri1 occurs 1 with header line,
sent_to_all like sonv-flag.
clear: reclist, reclist[],
objtxt , objtxt[],
objpack, objpack[],
objbin , objbin[],
doc_chng.
*--move list to office table objbin
*--Start of Changes to support PDF attachments - UB20030116
loop at html.
objbin-line = html-line.
append objbin.
clear objbin.
endloop.
loop at xi_pdf.
objbin-line = xi_pdf-text.
append objbin.
clear objbin.
endloop.
*--We may write additional text to the main document
*--For faxing this will be the cover page. Like sending from SAPoffice
*--the layout set Office-Telefax will be used.
objtxt-line = 'NOTE : Please Consider the below Headers'.
append objtxt.
clear objtxt.
objtxt-line = 'Assignment --> Purchase order number '.
append objtxt.
clear objtxt.
objtxt-line = 'Document --> Invoice No '.
append objtxt.
clear objtxt.
objtxt-line = 'Amount In DC --> Amount Due '.
append objtxt.
clear objtxt.
objtxt-line = ' '.
append objtxt.
clear objtxt.
objtxt-line = ' '.
append objtxt.
clear objtxt.
objtxt-line = 'Please find attached statement for this week'.
append objtxt.
clear objtxt.
objtxt-line = ' '.
append objtxt.
clear objtxt.
objtxt-line = 'This is an AUTO GENERATED MAIL'.
concatenate objtxt-line 'Please Do not reply to this mail' into
objtxt-line separated by ' '.
append objtxt.
clear objtxt.
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
*--Create the document which is to be sent
doc_chng-obj_name = 'List'.
doc_chng-obj_name = 'SAPRPT'.
doc_chng-obj_descr = 'Customer statement for the week'.
concatenate 'Customer statement for '
sy-datum into
doc_chng-obj_descr
separated by ' '.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + strlen( objtxt ).
*--Fill the fields of the packing_list for the main document:
*--It is a text document
clear objpack-transf_bin.
*--The document needs no header (head_num = 0)
objpack-head_start = 1.
objpack-head_num = 0.
*--but it has a body
objpack-body_start = 1.
objpack-body_num = tab_lines.
*--of type RAW
objpack-doc_type = 'RAW'.
append objpack.
*--Create the attachment (the list itself)
describe table objbin lines tab_lines.
*--Fill the fields of the packing_list for the attachment:
*--It is binary document
objpack-transf_bin = 'X'.
*--we need no header
objpack-head_start = 1.
objpack-head_num = 0.
*--but a body
objpack-body_start = 1.
objpack-body_num = tab_lines.
*--of type G_DOC_TYPE
objpack-doc_type = 'PDF'. "commented on 12/13/2007
objpack-doc_type = 'TXT'. "commented on 12/13/2007
objpack-obj_name = 'Attachment'.
objpack-obj_descr = 'Customer Statement'.
concatenate 'Customer Statement' sy-datum into objpack-obj_descr.
objpack-doc_size = tab_lines * 255.
append objpack.
reclist-receiver = g_email.
reclist-rec_type = 'U'.
reclist-com_type = 'FAX'.
append reclist.
data:xi type soli.
xi-line = 'haisdgsfsdf'.
append xi to xi_pdf.
xi-line = 'haisdfdsfd'.
append xi to xi_pdf.
xi-line = 'haisfgsdfsd'.
append xi to xi_pdf.
xi-line = 'haisdfsgfsdgg'.
append xi to xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
CALL FUNCTION 'SO_SOLITAB_TO_SOLIXTAB'
EXPORTING
ip_solitab = xi_pdf[]
IMPORTING
EP_SOLIXTAB = xtext[].
**--Send the document by calling the SAPoffice API1 module for sending
**--documents with attachments
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
IMPORTING
sent_to_all = sent_to_all
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
contents_hex = xtext
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
others = 99.HI,
There are lots of bugs.
Please refer this sample program to fix it.
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Best regards,
Prashant -
How can i send the chinese sms using java J2EE(web application)
hi,
i have the difficulty on sending chinese sms using J2EE application.i try to input the chinese word to jsp and send the plain text sms. i received the sms with plenty of question mark "?????". i think it is regarding to the conversion of String to some kind of format that supported by mobile phone. below are some code the send the sms to recipient. i need someone help in order to have the solution.
thanks a lot
<%@ page language="java" contentType="text/html; charset=utf-8" pageEncoding="utf-8"%>
<%@ page import="se.sapio.rta.service.MPMService"%>
<%@ page import="java.util.Locale"%>
<%
Locale.setDefault(Locale.UK);
Context ctx;
MPMService mpmservice;
ctx = new InitialContext();
mpmservice = (MPMService) ctx.lookup("BC/Service/RTAMPM");
LSUser user = null;
boolean ok = true;
try {
if (ok) {
String sender = request.getParameter("sender");
String phonenr = request.getParameter("phonenr");
String sendmsg = request.getParameter("sendmsg");
if(bError) {
byte[] bytes = message.getBytes("UTF-8");
message = mobileclientservice.ByteEncode(bytes);
response.sendRedirect("send_sms.jsp?s="+request.getParameter("s")+"&msg="+message+"&phonenr="+request.getParameter("phonenr").replaceAll("\\+","%2B")+"&sender="+request.getParameter("sender")+"&sendmsg="+request.getParameter("sendmsg").replaceAll("\\+","%2B"));
String resp = "";
if(mpmservice.sendPlainTextSMS(sender, phonenr, sendmsg)) {
resp=mpmservice.getLang(user.getLang(), "sms_sent");
} else {
resp=mpmservice.getLang(user.getLang(), "sms_not_sent");
} %>
<jsp:include page="/top.jsp" />
<p class="headline"><%=mpmservice.getLang(user.getLang(), "send_sms_title")%></p>
<form name="operatordetails" id="operatordetails" method="post" action="send_sms.jsp">
<INPUT TYPE=hidden NAME=s VALUE="<%=request.getParameter("s")%>">
<INPUT TYPE=hidden NAME=phonenr VALUE="<%=request.getParameter("phonenr")%>">
<table class="infotable" id="report">
<tr>
<td class="left" colspan="2"><%=resp%></td>
<td class="right"></td>
</tr>
<tr>
<td class="left" colspan="2">
<input class="halfmiddle" name="Back" type="submit" id="Back" value="<%=mpmservice.getLang(user.getLang(), "back")%>" />
</td>
<td class="right"> </td>
</tr>
</table>
</form>
<jsp:include page="/bottom.jsp" />
<% } %>
public boolean sendPlainTextSMS(String sender, String recipient, String sendmsg){
if(recipient.charAt(0) == '+')
recipient = recipient.substring(1);
String senderIdType = "Alpha";
if( (sender.charAt(0) >= '0' && sender.charAt(0) <= '9') || sender.charAt(0) == '+')
senderIdType = "Numeric";
if(sender.charAt(0) == '+')
sender = sender.substring(1);
for(int i=0; i < sender.length(); i++)
if(!(sender.charAt(i) >= '0' && sender.charAt(i) <= '9'))
senderIdType = "Alpha";
log.warn("sending sms to: "+recipient + " sendtype: " + senderIdType + " msg: "+ sendmsg);
log.warn("Encoded sms:"+Encode(sendmsg));
try{
String postData = "XMLDATA=" + URLEncoder.encode("<?xml version=\"1.0\" encoding=\"ISO-8859-1\" ?>\r\n" +
"<NotificationRequest Version=\"3.4\">\r\n" +
" <NotificationHeader>\r\n" +
" <PartnerName>" + SMS_PARTNER_NAME + "</PartnerName>\r\n" +
" <PartnerPassword>" + SMS_PARTNER_PASSWORD + "</PartnerPassword>\r\n" +
" <SubscriptionName>XML</SubscriptionName>\r\n" +
" </NotificationHeader>\r\n" +
" <NotificationList BatchID=\"1\">\r\n" +
" <Notification SequenceNumber=\"0\" MessageType=\"SMS\">\r\n" +
" <Message>" + Encode(sendmsg) + "</Message>\r\n" +
" <Profile>" + SMS_PARTNER_PROFILE + "</Profile>\r\n" +
" <SenderID Type=\"" + senderIdType + "\">" + sender + "</SenderID>\r\n" +
" <Subscriber>\r\n" +
" <SubscriberNumber>" + recipient + "</SubscriberNumber>\r\n" +
" </Subscriber>\r\n" +
" </Notification>\r\n" +
" </NotificationList>\r\n" +
"</NotificationRequest>","ISO-8859-1");
appreciate for anyone provide the solution.
thanks a lotHi,
I want to send sms from web application to mobile phones at the time of registration. Its verymuch greatful to me, if you let me know, how to send from jsp to mobile. because from your post, i got, you already know about sending sms from jsp to mobile.
please let me know, how to send sms
[email protected]
Thanks in advance for your kind help -
Azure Sql DB Export to Storage Container fails with "An error occurred while sending the request"
I've built a new VM from which I'm running PowerShell scripts to backup my databases. It had worked before on an old server for several months, and worked once on the new server, then I upgraded my Azure PowerShell cmdlets, and haven't been able to
get it to work again. The new version is 0.8.10.1.
Below is my source code, with sensitive stuff replaced with ?'s. When I display the $stctx and $dbctx, they seem to have reasonable values. I added the IP address of the server as an exception to the db firewall, and I've installed SQL Server
Mangement Studio and verified that I can connect to the database. I have a feeling there's something simple I've overlooked.
Here's are both error messages:
Start-AzureSqlDatabaseExport : An error occurred while sending the request.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Start-AzureSqlDatabaseExport : Error while copying content to a stream.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Here is the source code:
param($dbname)
if ($dbname -eq $null) {
write-host "Database code must be specified"
return
$password = "????"| ConvertTo-SecureString -asPlainText -Force
$servercredential = new-object System.Management.Automation.PSCredential("????", $password)
$dbsize = 1
$dbrestorewait = 10
$dbserver = "????"
$stacct = $dbname
$stkey = "????"
$stctx = New-AzureStorageContext -StorageAccountName $stacct -StorageAccountKey $stkey
$dbctx = New-AzureSqlDatabaseServerContext -ServerName $dbserver -Credential $servercredential
$dt = Get-Date
$timestamp = "_" + $dt.Year + "-" + ("{0:D2}" -f $dt.Month) + "-" + ("{0:D2}" -f $dt.Day) + "-" + ("{0:D2}" -f $dt.Hour) + ("{0:D2}" -f $dt.Minute)
$bkupname = $dbname + $timestamp + ".bacpac"
write-host "db context"
$dbctx
write-host "storage context"
$stctx
write-host "Backup $dbname to $bkupname"
Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx -StorageContainerName databasebackup -DatabaseName $dbname -BlobName $bkupnameHi Brad,
Mentioned script, with appropriate values, works on my system.
I'm able to export an Azure SQL database to blob storage. Am using version 0.8.10.1 of cmdlets, so this the same version mentioned in this problem description.
Can you please try using Add-AzureAccount and check if that helps. This is indicated in a different third-party blog.
http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1%29."http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1
Does it work from a different machine with newly downloaded credentials.
Does it work for a newly created database (so minimal database size).
If above do not work, we may require additional details like RequestID, StorageAccountName, ServerName so an MS ticket may be more appropriate.
Girish Prajwal -
HR: Need to Send the Paysilp as a PDF file through Mail to Employees
Dear All ,
Need to Send the Paysilp as a PDF file through Mail to Employees.
can anyone please suggest any Standard Function Modules which takes the Payslip Form as input and convert it into PDF and can send it through mail to the concern employees.
Can anyone please explain the procedure in detail.
Thanks in Advance,
Regards.venu,
below is code which helps to generate pdf ,,,,hope u know how to use the mail sending function
data:
fm_name TYPE RS38L_FNAM, "Smart Forms: FM Name
sf_name TYPE TDSFNAME
value 'YOUR_FORM_NAME', "Smart Forms: Form Name
P_OUTPUT_OPTIONS TYPE SSFCOMPOP,
P_JOB_OUTPUT_INFO TYPE SSFCRESCL,
P_CONTROL_PARAMETERS TYPE SSFCTRLOP,
P_LANGUAGE TYPE SFLANGU value 'E',
P_E_DEVTYPE TYPE RSPOPTYPE.
data:
P_BIN_FILESIZE TYPE I,
P_BIN_FILE TYPE XSTRING,
P_OTF type table of ITCOO,
P_DOCS type table of DOCS,
P_LINES type table of TLINE,
name type string,
path type string,
fullpath type string,
filter type string,
guiobj type ref to cl_gui_frontend_services,
uact type i,
filename(128).
GET SMARTFORM FUNCTION MODULE NAME ---
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = sf_name
IMPORTING
FM_NAME = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
I_LANGUAGE = P_LANGUAGE
I_APPLICATION = 'SAPDEFAULT'
IMPORTING
E_DEVTYPE = P_E_DEVTYPE.
P_OUTPUT_OPTIONS-XSFCMODE = 'X'.
P_OUTPUT_OPTIONS-XSF = SPACE.
P_OUTPUT_OPTIONS-XDFCMODE = 'X'.
P_OUTPUT_OPTIONS-XDF = SPACE.
P_OUTPUT_OPTIONS-TDPRINTER = P_E_DEVTYPE.
P_CONTROL_PARAMETERS-NO_DIALOG = 'X'.
P_CONTROL_PARAMETERS-GETOTF = 'X'.
****...................................PRINTING.........................
CALL FUNCTION fm_name
EXPORTING
CONTROL_PARAMETERS = P_CONTROL_PARAMETERS
OUTPUT_OPTIONS = P_OUTPUT_OPTIONS
(....) <--- your form import parameters
IMPORTING
JOB_OUTPUT_INFO = P_JOB_OUTPUT_INFO.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
P_OTF[] = P_JOB_OUTPUT_INFO-OTFDATA.
****...................................CONVERT TO PDF...............
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
BIN_FILESIZE = P_BIN_FILESIZE
TABLES
OTF = P_OTF
DOCTAB_ARCHIVE = P_DOCS
LINES = P_LINES
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
now you can mail the pdf.
Reward points if helpful
Regards,
jinesh -
Problem while sending the o/p of payslip report through mail
Hi ,
I am trying to mail the output of ZHINACALC0 (copy of standard program HINCALC0 for payslip display)
In the report code of ZHINCALC0, there is a form named xform which contanis the o/p of the employee's payslip.
CALL FUNCTION 'HR_PL_APPEND_FORM'
EXPORTING
imp_pernr = pernr-pernr
imp_period = rgdir-inper "XMS note 386560
TABLES
imp_form = *xform*
EXCEPTIONS
OTHERS = 0.
I am using the following function module to get the o/p from memory.
SUBMIT ZHINCALC0 EXPORTING LIST TO MEMORY AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
LISTOBJECT = LISTOBJECT
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
WRITE 'Error in list_from_memory.'.
ENDIF.
after this i am using SO_NEW_DOCUMENT_ATT_SEND_API1 to send the o/p through mail.
However i am not getting the desired result as the function module LIST_FROM_MEMORY takes an o/p list as input,but this is not the case here as xform is not an o/p list. How do i send the xform into memory and then get it back. Kindly help.
Thanks and Regards,
Subhabrata.Hi,
Please check with the following code.
TABLES: KNA1.
data for send function
DATA DOC_DATA LIKE SODOCCHGI1.
DATA OBJECT_ID LIKE SOODK.
DATA OBJCONT LIKE SOLI OCCURS 10 WITH HEADER LINE.
DATA RECEIVER LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.
SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.
WRITE:/ KNA1-KUNNR, KNA1-ANRED.
send data internal table
CONCATENATE KNA1-KUNNR KNA1-ANRED
INTO OBJCONT-LINE SEPARATED BY SPACE.
APPEND OBJCONT.
ENDSELECT.
insert receiver (sap name)
REFRESH RECEIVER.
CLEAR RECEIVER.
MOVE: 'any_email'_ TO RECEIVER-RECEIVER, " SY-UNAME
'X' TO RECEIVER-EXPRESS,
'U' TO RECEIVER-REC_TYPE.
APPEND RECEIVER.
insert mail description
WRITE 'Sending a mail through abap'
TO DOC_DATA-OBJ_DESCR.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_DATA
IMPORTING
NEW_OBJECT_ID = OBJECT_ID
TABLES
OBJECT_CONTENT = OBJCONT
RECEIVERS = RECEIVER
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8. -
Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
How to send the ALV GRID output to spool by using the print button in std t
How to send the ALV GRID output to spool by using the print button in standard tool bar.
We have created a button in the va02 transaction. If user click on the button the new screen will be display on that screen we are populating the alv grid output using the oops concept. But i am unable to send the output to spool using the print button in the standard tool bar.
I am able to display the Print parameter dialog box but i am not able to send it to spool.
Kindly help.
Thanks In Advance.
G.V.RamanaHi Shaik,
There is not properties button in my print screen.
MODULE user_command_0900 INPUT.
WHEN 'EXCEL'.
PERFORM excel_download.
WHEN 'PRI'.
PERFORM print_output.
form Print_output.
CALL FUNCTION 'RSPO_LIST_LAYOUT_FITS'
EXPORTING
columns = 80
device = 'ANY '
lines = 65
maxpenality = 1999
TABLES
layouts = lt_layouts1
EXCEPTIONS
unknown_device = 1
OTHERS = 2.
IF sy-subrc = 0.
LOOP AT lt_layouts1.
IF lt_layouts1-penality < 1000 AND
lt_layouts1-penality < l_min_penality.
l_layout = lt_layouts1-layout.
l_min_penality = lt_layouts1-penality.
ENDIF.
ENDLOOP.
IF NOT l_layout IS INITIAL.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
mode = 'CURRENT'
line_size = 80 "#EC *
new_list_id = l_new_list_id
no_dialog = l_no_dialog
layout = l_layout
IMPORTING
out_archive_parameters = rs_arc_params
out_parameters = rs_pri_params
valid = l_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc NE 0. " INS SLIN
ENDIF. " INS SLIN
IF rs_pri_params-linsz LT 80 OR
rs_pri_params-linsz LT gt_stack-s_lprint-width.
gt_stack-print_line_break = 'X'.
ELSE.
CLEAR gt_stack-print_line_break.
ENDIF.
IF l_valid NE 'X'.
rs_pri_params = ls_pri_params_sav.
rs_arc_params = ls_arc_params_sav.
ENDIF.
ENDIF.
ENDIF.
endform. " Print_output
CALL METHOD gv_cost_tot_alv_grand->set_table_for_first_display
EXPORTING
is_layout = gs_layout_cost_tot_grand
CHANGING
it_fieldcatalog = gt_fcat_cost_tot_grand[]
it_outtab = gt_cost_tot_grand[].
Please check my code -
I have another apple ID but I forgot the password and apple does not send the link to reset it to my email. What do I do to have it back? It is really important.
If you know the answers to your security question for the ID you can use that method to reset the password rather than email (by going to https://iforgot.apple.com/password/verify/appleid).
If you don't, you'll have to contact iTunes Store support for assistance: http://www.apple.com/emea/support/itunes/contact.html. They frequently deal with Apple ID issues. -
Problem in sending the smartform as an email in a country specific language
Hi,
I am facing a problem in sending a smartform as a email for all other Languages except english and another problem is its sending the email but the output status is still in RED in the messages tab.
the program is working fine for english.
Please do find the below code using which i would be sending the smartform as an email for a PO along with the line item attachments.
Please help.
Arun.
Determine smartform function module for purchase document
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lf_formname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
error handling
ent_retco = sy-subrc.
IF sy-subrc = 1.
MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
IF sy-subrc = 2.
MESSAGE e002(/smb40/ssfcomposer) WITH tnapr-sform.
ENDIF.
PERFORM protocol_update_i.
ENDIF.
*Start of changes <Arun K Singarapu> C082493 <04/28/2008>
*for print preview
IF sy-ucomm = 'PREVOUTPUT' OR sy-ucomm = 'VIEW'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
EXIT.
ELSE.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_compop-tdnoprev = 'X'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Convert the data from OTF to PDF format
it_otf[] = wa_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = l_len_in
bin_file = lp_xcontent
TABLES
otf = it_otf
lines = it_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TRY.
---------- create persistent send request ----------------------
send_request = cl_bcs=>create_persistent( ).
len = XSTRLEN( lp_xcontent ).
transform to solix tab
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = lp_xcontent ).
Create Body to the E-mail.
APPEND Text-005 TO l_text.
Attachment Name
l_ponumber = text-004.
CONCATENATE l_ponumber l_doc-xekko-ebeln INTO l_ponumber.
Subject for the E-Mail.
l_subject = text-001.
CONCATENATE l_subject l_doc-xekko-ebeln INTO l_subject.
*create document E-Mail.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'RAW'
i_subject = l_subject
i_length = '13'
i_text = l_text
RECEIVING
result = l_email_object.
*Create PDF Document
bcs_doc = cl_document_bcs=>create_document(
i_type = 'PDF'
i_subject = l_ponumber
i_length = len
i_language = nast-spras
i_hex = lt_solix
*Type casting
obj_pdf_file ?= bcs_doc.
Add PDF document as an attachment
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_pdf_file.
get the attachments of the PO for each line item
SELECT ebeln
ebelp
FROM ekpo
INTO TABLE it_ekpo
WHERE ebeln = l_doc-xekko-ebeln.
concatenate PO and the Line Item Numebr to get the Object key
LOOP AT it_ekpo INTO wa_ekpo.
CONCATENATE wa_ekpo-ebeln wa_ekpo-ebelp INTO wa_temp-objky.
APPEND wa_temp TO it_temp.
CLEAR: wa_temp,wa_ekpo.
ENDLOOP.
*Get data from table DRAD
IF it_temp[] IS NOT INITIAL.
SELECT dokar
doknr
dokvr
doktl
objky
FROM drad
client specified
INTO TABLE it_drad
FOR ALL ENTRIES IN it_temp
WHERE mandt = sy-mandt
AND objky = it_temp-objky.
ENDIF.
IF NOT it_drad IS INITIAL.
SELECT * FROM dms_doc2loio
INTO TABLE it_dms_doc2loio
FOR ALL ENTRIES IN it_drad
WHERE dokar = 'SRM'
AND doknr = it_drad-doknr
AND dokvr = it_drad-dokvr
AND doktl = it_drad-doktl.
ENDIF.
Get the Physical object class and Object ID of the attachment
IF NOT it_dms_doc2loio IS INITIAL.
SELECT * FROM dms_ph_cd1
INTO TABLE it_dms_ph_cd1
FOR ALL ENTRIES IN it_dms_doc2loio
WHERE loio_id = it_dms_doc2loio-lo_objid.
ENDIF.
Get the file from the DMS server using the below function module.
LOOP AT it_dms_ph_cd1 INTO wa_dms_ph_cd1.
wa_object_id-class = wa_dms_ph_cd1-ph_class.
wa_object_id-objid = wa_dms_ph_cd1-phio_id.
CALL FUNCTION 'SDOK_PHIO_LOAD_CONTENT'
EXPORTING
object_id = wa_object_id
client = sy-mandt
TABLES
file_access_info = it_file_access_info
file_content_binary = it_sdokcntbin
EXCEPTIONS
not_existing = 1
not_authorized = 2
no_content = 3
bad_storage_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE it_file_access_info INTO wa_file_access_info INDEX 1.
IF wa_file_access_info-mimetype = 'application/msword'.
l_doc_type = 'DOC'.
CLEAR: a_xstring,len.
LOOP AT it_sdokcntbin INTO wa_sdokcntbin.
CONCATENATE a_xstring wa_sdokcntbin-line
INTO a_xstring IN BYTE MODE.
ENDLOOP.
len = XSTRLEN( a_xstring ).
transform to solix tab - adding additional attachments
REFRESH lt_solix.
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = a_xstring ).
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_solix
*Type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for PDF document
ELSEIF wa_file_access_info-mimetype = 'application/pdf'.
l_doc_type = 'PDF'.
file_size = wa_file_access_info-file_size.
Convert the 1022 binary data to xstring
CLEAR a_xstring.
CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
EXPORTING
input_length = file_size
IMPORTING
buffer = a_xstring
TABLES
binary_tab = it_sdokcntbin
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA: w_output_length TYPE i.
Convert Xstring to 255 RAW
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = a_xstring
IMPORTING
output_length = w_output_length
TABLES
binary_tab = lt_content_bin.
len = w_output_length.
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_content_bin
type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for Excel Document
ELSEIF wa_file_access_info-mimetype = 'application/msexcel'.
l_doc_type = 'XLS'.
CLEAR: a_xstring,len.
LOOP AT it_sdokcntbin INTO wa_sdokcntbin.
CONCATENATE a_xstring wa_sdokcntbin-line
INTO a_xstring IN BYTE MODE.
ENDLOOP.
len = XSTRLEN( a_xstring ).
transform to solix tab - adding additional attachments
REFRESH lt_solix.
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = a_xstring ).
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_solix
*Type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for text doxument
ELSEIF wa_file_access_info-mimetype = 'plain/text'.
l_doc_type = 'TXT'.
file_size = wa_file_access_info-file_size.
Get the file name
l_filename = wa_file_access_info-file_name.
CALL FUNCTION 'SCMS_BINARY_TO_TEXT'
EXPORTING
input_length = file_size
TABLES
binary_tab = it_sdokcntbin
text_tab = file_data
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = l_doc_type
i_subject = l_filename
i_text = file_data
RECEIVING
result = bcs_doc1.
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
ENDIF.
CLEAR:it_file_access_info,it_sdokcntbin.
CLEAR:wa_object_id,wa_file_access_info,file_size.
ENDLOOP.
CALL METHOD send_request->set_document( l_email_object ).
*Get the address number for the vendor
SELECT SINGLE adrnr
FROM lfa1
INTO l_adrnr
WHERE lifnr = l_doc-xekko-lifnr.
MOVE l_adrnr TO l_addrno.
Get the Email Address for the vendor using address number
CALL FUNCTION 'ADDR_GET_REMOTE'
EXPORTING
addrnumber = l_addrno
TABLES
adsmtp = it_adsmtp
EXCEPTIONS
parameter_error = 1
address_not_exist = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD send_request->set_sender
EXPORTING
i_sender = sender.
READ TABLE it_adsmtp INTO wa_adsmtp WITH KEY flg_nouse = 'X'.
IF sy-subrc = 0.
LOOP AT it_adsmtp INTO wa_adsmtp WHERE flg_nouse = 'X'.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = wa_adsmtp-smtp_addr
RECEIVING
result = recipient.
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDLOOP.
ELSE.
READ TABLE it_adsmtp INTO wa_adsmtp WITH KEY flgdefault = 'X'.
IF sy-subrc = 0.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = wa_adsmtp-smtp_addr
RECEIVING
result = recipient.
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDIF.
ENDIF.
CALL METHOD send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = l_sent_to_all ).
CATCH cx_bcs INTO bcs_exception.
WRITE: 'Fehler aufgetreten.'(001).
WRITE: 'Fehlertyp:'(002), bcs_exception->error_type.
EXIT.
ENDTRY.
ENDIF.Hi,
I am facing a problem in sending a smartform as a email for all other Languages except english and another problem is its sending the email but the output status is still in RED in the messages tab.
the program is working fine for english.
Please do find the below code using which i would be sending the smartform as an email for a PO along with the line item attachments.
Please help.
Arun.
Determine smartform function module for purchase document
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lf_formname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
error handling
ent_retco = sy-subrc.
IF sy-subrc = 1.
MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
IF sy-subrc = 2.
MESSAGE e002(/smb40/ssfcomposer) WITH tnapr-sform.
ENDIF.
PERFORM protocol_update_i.
ENDIF.
*Start of changes <Arun K Singarapu> C082493 <04/28/2008>
*for print preview
IF sy-ucomm = 'PREVOUTPUT' OR sy-ucomm = 'VIEW'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
EXIT.
ELSE.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_compop-tdnoprev = 'X'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Convert the data from OTF to PDF format
it_otf[] = wa_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = l_len_in
bin_file = lp_xcontent
TABLES
otf = it_otf
lines = it_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TRY.
---------- create persistent send request ----------------------
send_request = cl_bcs=>create_persistent( ).
len = XSTRLEN( lp_xcontent ).
transform to solix tab
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = lp_xcontent ).
Create Body to the E-mail.
APPEND Text-005 TO l_text.
Attachment Name
l_ponumber = text-004.
CONCATENATE l_ponumber l_doc-xekko-ebeln INTO l_ponumber.
Subject for the E-Mail.
l_subject = text-001.
CONCATENATE l_subject l_doc-xekko-ebeln INTO l_subject.
*create document E-Mail.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'RAW'
i_subject = l_subject
i_length = '13'
i_text = l_text
RECEIVING
result = l_email_object.
*Create PDF Document
bcs_doc = cl_document_bcs=>create_document(
i_type = 'PDF'
i_subject = l_ponumber
i_length = len
i_language = nast-spras
i_hex = lt_solix
*Type casting
obj_pdf_file ?= bcs_doc.
Add PDF document as an attachment
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_pdf_file.
get the attachments of the PO for each line item
SELECT ebeln
ebelp
FROM ekpo
INTO TABLE it_ekpo
WHERE ebeln = l_doc-xekko-ebeln.
concatenate PO and the Line Item Numebr to get the Object key
LOOP AT it_ekpo INTO wa_ekpo.
CONCATENATE wa_ekpo-ebeln wa_ekpo-ebelp INTO wa_temp-objky.
APPEND wa_temp TO it_temp.
CLEAR: wa_temp,wa_ekpo.
ENDLOOP.
*Get data from table DRAD
IF it_temp[] IS NOT INITIAL.
SELECT dokar
doknr
dokvr
doktl
objky
FROM drad
client specified
INTO TABLE it_drad
FOR ALL ENTRIES IN it_temp
WHERE mandt = sy-mandt
AND objky = it_temp-objky.
ENDIF.
IF NOT it_drad IS INITIAL.
SELECT * FROM dms_doc2loio
INTO TABLE it_dms_doc2loio
FOR ALL ENTRIES IN it_drad
WHERE dokar = 'SRM'
AND doknr = it_drad-doknr
AND dokvr = it_drad-dokvr
AND doktl = it_drad-doktl.
ENDIF.
Get the Physical object class and Object ID of the attachment
IF NOT it_dms_doc2loio IS INITIAL.
SELECT * FROM dms_ph_cd1
INTO TABLE it_dms_ph_cd1
FOR ALL ENTRIES IN it_dms_doc2loio
WHERE loio_id = it_dms_doc2loio-lo_objid.
ENDIF.
Get the file from the DMS server using the below function module.
LOOP AT it_dms_ph_cd1 INTO wa_dms_ph_cd1.
wa_object_id-class = wa_dms_ph_cd1-ph_class.
wa_object_id-objid = wa_dms_ph_cd1-phio_id.
CALL FUNCTION 'SDOK_PHIO_LOAD_CONTENT'
EXPORTING
object_id = wa_object_id
client = sy-mandt
TABLES
file_access_info = it_file_access_info
file_content_binary = it_sdokcntbin
EXCEPTIONS
not_existing = 1
not_authorized = 2
no_content = 3
bad_storage_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE it_file_access_info INTO wa_file_access_info INDEX 1.
IF wa_file_access_info-mimetype = 'application/msword'.
l_doc_type = 'DOC'.
CLEAR: a_xstring,len.
LOOP AT it_sdokcntbin INTO wa_sdokcntbin.
CONCATENATE a_xstring wa_sdokcntbin-line
INTO a_xstring IN BYTE MODE.
ENDLOOP.
len = XSTRLEN( a_xstring ).
transform to solix tab - adding additional attachments
REFRESH lt_solix.
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = a_xstring ).
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_solix
*Type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for PDF document
ELSEIF wa_file_access_info-mimetype = 'application/pdf'.
l_doc_type = 'PDF'.
file_size = wa_file_access_info-file_size.
Convert the 1022 binary data to xstring
CLEAR a_xstring.
CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
EXPORTING
input_length = file_size
IMPORTING
buffer = a_xstring
TABLES
binary_tab = it_sdokcntbin
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA: w_output_length TYPE i.
Convert Xstring to 255 RAW
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = a_xstring
IMPORTING
output_length = w_output_length
TABLES
binary_tab = lt_content_bin.
len = w_output_length.
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_content_bin
type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for Excel Document
ELSEIF wa_file_access_info-mimetype = 'application/msexcel'.
l_doc_type = 'XLS'.
CLEAR: a_xstring,len.
LOOP AT it_sdokcntbin INTO wa_sdokcntbin.
CONCATENATE a_xstring wa_sdokcntbin-line
INTO a_xstring IN BYTE MODE.
ENDLOOP.
len = XSTRLEN( a_xstring ).
transform to solix tab - adding additional attachments
REFRESH lt_solix.
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = a_xstring ).
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_solix
*Type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for text doxument
ELSEIF wa_file_access_info-mimetype = 'plain/text'.
l_doc_type = 'TXT'.
file_size = wa_file_access_info-file_size.
Get the file name
l_filename = wa_file_access_info-file_name.
CALL FUNCTION 'SCMS_BINARY_TO_TEXT'
EXPORTING
input_length = file_size
TABLES
binary_tab = it_sdokcntbin
text_tab = file_data
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = l_doc_type
i_subject = l_filename
i_text = file_data
RECEIVING
result = bcs_doc1.
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
ENDIF.
CLEAR:it_file_access_info,it_sdokcntbin.
CLEAR:wa_object_id,wa_file_access_info,file_size.
ENDLOOP.
CALL METHOD send_request->set_document( l_email_object ).
*Get the address number for the vendor
SELECT SINGLE adrnr
FROM lfa1
INTO l_adrnr
WHERE lifnr = l_doc-xekko-lifnr.
MOVE l_adrnr TO l_addrno.
Get the Email Address for the vendor using address number
CALL FUNCTION 'ADDR_GET_REMOTE'
EXPORTING
addrnumber = l_addrno
TABLES
adsmtp = it_adsmtp
EXCEPTIONS
parameter_error = 1
address_not_exist = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD send_request->set_sender
EXPORTING
i_sender = sender.
READ TABLE it_adsmtp INTO wa_adsmtp WITH KEY flg_nouse = 'X'.
IF sy-subrc = 0.
LOOP AT it_adsmtp INTO wa_adsmtp WHERE flg_nouse = 'X'.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = wa_adsmtp-smtp_addr
RECEIVING
result = recipient.
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDLOOP.
ELSE.
READ TABLE it_adsmtp INTO wa_adsmtp WITH KEY flgdefault = 'X'.
IF sy-subrc = 0.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = wa_adsmtp-smtp_addr
RECEIVING
result = recipient.
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDIF.
ENDIF.
CALL METHOD send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = l_sent_to_all ).
CATCH cx_bcs INTO bcs_exception.
WRITE: 'Fehler aufgetreten.'(001).
WRITE: 'Fehlertyp:'(002), bcs_exception->error_type.
EXIT.
ENDTRY.
ENDIF.
Maybe you are looking for
-
I have a number of midi devices I still use in production. I have been slow to upgrade to Logic 8 because I don't want to lose use of all my gear. How do I set up the new environment in Logic to select patches from within Logic? I'm already aware of
-
HT4061 How can I restore an iTunes purchased movie that I accidentally deleted. Thank you.
How can I restore a purchased iTunes movie that I accidentally deleted? Thanks. BB
-
Camera app just stopped working
My camera app just stopped. I click on it and just get a blank screen. Everything else is working. THX
-
The company which I am working for is interested in using 3D pdf's to give presentations so I have been testing this. I am creating model files using Microstation and then using the "print to 3D pdf" utility to create the 3D pdf. All is fine when vie
-
Hiii gurus We are uploading data from April ' 07 till now..while uploading data i have entered the closing balances of assets and for group assets.. Now in the month of April & May ' 07 , in Asset master template i forgot to enter Group Asset no. in