Sender RFC scenario not working

Hi All,
I'm trying to configure a scenario where the sender is an RFC. I have done the following configuration steps:
1. Created an RFC destination in the R/3 system.
   Program ID: SAPSLDAPI_X3A
   Gateway Host: hostname of the XI system
   Gateway Service: Gateway service of the XI system
2. In the RFC Sender channel
   App Server Gateway: R/3 system's hostname
   App Server Service: of the R/3 system
   Program ID: SAPSLDAPI_X3A
3. In the RFC Metadata Repository Parameter, the details of the R/3 system is provided.
4. The RFC is triggered by calling a report program specifying the RFC destination.
But no messages are coming to the message monitor. Is anything wrong here or is something missing? Is there any way to see what happened in the R/3 system?
Could you please help?
Thanks,
Priya

Hi,
1. Created an RFC destination in the R/3 system.
Program ID: SAPSLDAPI_X3A
Gateway Host: hostname of the XI system
Gateway Service: Gateway service of the XI system
This is fine.. I would recommend you to use different name coz SAPSLDAPI is a RFC destination name for SLD communication purpose. Its better to avoid using some system names. But this is not a problem.
2. In the RFC Sender channel
App Server Gateway: R/3 system's hostname
App Server Service: of the R/3 system
Program ID: SAPSLDAPI_X3A
The App Server Gateway, App Server Service & Program ID should match with what you have given in the RFC destination of R/3 system.
After this try doing a test connection from the RFC destination sm59. Your test should be succesful.
3. In the RFC Metadata Repository Parameter, the details of the R/3 system is provided.
This is fine
4. The RFC is triggered by calling a report program specifying the RFC destination.
This is also fine.
Also in order to see any messages in SXMB_MONI you need to enable Logging. Trace level = 3 will not capture the Sync message. RFC is by default Sync. If your sender is not expecting any response then you will get an error in the response message, in this case you need Async.
For Async you need to add this addition while doing the call function "IN BACKGROUND TASK". Also make sure you re mentioning the destination while doing the call function.
Check you have mentioned
DESTINATION <rfc destname>.
Thanks,
Prakash

Similar Messages

Sender RFC is not working

Hi
I am working on RFC to SOAP Scenorio
I configured Sender RFC Communication Channel.
Using the same program id, i created RFC destination.
The RFC Destination is working fine.
When i test it using program, i am getting the
error alternativeServiceIdentifier via CPA-cache
Can you pls help
Regards
Madhan D

hi,
did you configure as per my blog:
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
regards,
Michal Krawczyk

File to RFC Scenario - Not working with AAE

I have a File to RFC Scenario (calling RFC /POSDW/CREATE_TRANSACTIONS_EXT) using AAE but it is failing with following error in PI .
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
But When I run the same scenario using IE instead of AAE, it is successful from PI. So probably there is nothing wrong in RFC channel configuration.
There's an OSS note-730870 on this error ,it says the XML document sent to RFC Adapter may not be RFC-XML but as I am using AAE, payload generated after technical routing cannot be viewed.
Could you all please suggest why this error is coming and solution for the same?
Thanks,
Ankit

Hi Debashish,Monica,
Thanks for your help, I checked this SAP note its question 16 do describe my problem but do not provide solution and as I am using AAE it does not allows me to see the target structure generated whereas if I use IE the target structure generated is sucessfully getting posted.
Also, the functional module is present in target system. I have reimported the RFC also.
Is there some AAE related configuration required to enable AAE with RFC which could be missing?
This is what I get in log as the RFC reciever is called..
06.09.2011 14:15:31 Information MP: entering1
06.09.2011 14:15:31 Information MP: processing local module localejbs/RfcAFBean
06.09.2011 14:15:31 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
06.09.2011 14:15:31 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
06.09.2011 14:15:31 Error Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
Thanks,
Ankit

File to Rfc scenario,not updated in rfc

Hi,
File to RFC scenario,not updated in RFC?
i checked communication channels ,smq1,smq2,sm58,cache refresh.but issue was not solved.
Please advise where need to check?
Thanks
Amita

Hi Amita,
First check whether the configuration between PI and ECC has been set up properly.
Are you using a stand RFC or custom RFC?
Import the RFC metadata from ECC to PI and use that structure in your service interface and configure the remaining objects that we normally do.
Now, try to process the file and check in the communication channel, whether file Adapter is able to pick up and send the message to PI system.
If the message is successfully processed through PI system then check the messages in Queues. Also, check the RFC communication channel in the adapter engine.
Follow the process, you might get some clue regarding the issue.

HT201320 I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

Well, this is a recurring issue for many users...a small percentage of users but still a bug. Report the issue here to Apple: www.apple.com/feedback
iOS7.0.3 will be released next week, which as of now, I know is primarily for an iMessage but hopefully it will clear up some of these email issues some are also having.

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

Send to is not working when a document library is associated with work flow.

Send to is not working when a document library is associated with work flow.
question is when a workflow is tied to list send to don't work ?
we get a ntlm login prompt sphoradically, if we cancel the prompt we and reload the page we get the resultsen

could you please give more detail about the issue?
What kind of the workflow associated to the Library and what error you getting when trying to perform send to?
check ULS logs...
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Send E-mail not working???

I'm having issues with the "send email" button not working. When I test (F4) the functionality of a quiz inside captivate 5 & 5.5 and get to the end of the quiz I click the send email button and it opens my email with the results in the body of the email like its supposed to...but when I publish the course launch the published html file and then take the quiz when I click the send email button nothing happens (literally nothing). Am I missing something simple? I don't remember this being an issue in previous version...
Thanks for the help
B

Hi there
Please investigate the link below
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

HT4865 my message send tab is not working, any idea why please, thanks in advance,

My message tab to send is not working,I can type the message but when I press send it 's not working,
I don't remember doing anything to stop it, Can anyone advise me please, thanks you in advance,

If you have Settings>Messages>Show Subject Field set to On, you may be typing in the subject field of your message. The Send button won't respond until you type something in the iMessage field just below it.

TS4268 My iMessage send button is not working. How do I get it to work?

My iMessage send button is not working. How do I get it to work?

Hi,
You may have a virus on your PC. Review this NBC Nightly news article.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

" send link" is not working , when click on it, nothing happens, but Firefox 4.0 will work

File --> Send link will not work after Update Firefox 4.0 to 8.0
It is happening all the time.
Before update, the 4.0 version will work.

File --> Send link will not work after Update Firefox 4.0 to 8.0
It is happening all the time.
Before update, the 4.0 version will work.

Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Web Service Scenario Not Working

Hi Sdners,
I am working on Support project where I have web Service to RFC Scenario which is synchronus scenario. when the user sending the WSDL request to XI it's woking fine in for Devlopment but it is not working QA .In QA i am gettings error below
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="urn:sap-com:document:sap:rfc:functions">ZCA_RATE_INTF.Exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I asking user to send the message from their they are coming to QA syetm insted of DEV.........for this where I have to check........
Edited by: gangadhar kh on Mar 3, 2010 12:29 PM

HI All,
Can anyone help me on this?
there is no communication is going between the sender system(Web Service) to PI . When user is sending the data through URL he is not able to send the data and when he is sending the data . I am getting the message in PI/XI(MONI) messsage coming (with system Error with balls sign)

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="urn:sap-com:document:sap:rfc:functions">ZCA_PRICE_F_EX_RATE_INTF.Exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
and IN payload of This message
RFC_ERROR_SYSTEM_FAILURE</ID><Attributes><V1>CALL_FUNCTION_NO_DEST</V1>
Please suggest on this Problem
Regards
Edited by: gangadhar kh on Mar 8, 2010 6:00 AM

Sender RFC Scenario Error:Payload Is Missing

I am facing an issue in 'RFC2JDBC' scenario which is mentioned below:
here our scenario is 'RFC2JDBC'.here our 'RFC' is having 2 fields in tables parameter
i.e. empno & empname.
the results of the 'RFC' is coming as:
Personnel Number Employee Name
00000100 Rasmiraj
00000200 Tanmay
00000300 Kanhu
00000400 Debabrata
00000500 shantanu
i am triggering the 'rtfc' through a program.
when i am triggering the 'RFC',in monitor of PI it's coming as sucessful.however in the payload one of the field value is missing i.e. employee name.(same also updating in the legacy database)
in the payload it's appearing as:
[ <?xml version="1.0" encoding="UTF-8" ?>
- <rfc:ZSAM_SEND_RFC_PI xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <EMP_DTLS>
- <item>
<EMPNO>00000100</EMPNO>
<EMPNAME />
</item>
- <item>
<EMPNO>00000200</EMPNO>
<EMPNAME />
</item>
- <item>
<EMPNO>00000300</EMPNO>
<EMPNAME />
</item>
- <item>
<EMPNO>00000400</EMPNO>
<EMPNAME>a</EMPNAME>
</item>
- <item>
<EMPNO>00000500</EMPNO>
<EMPNAME />
</item>
</EMP_DTLS>
</rfc:ZSAM_SEND_RFC_PI> ]
please,suggest.(here,we are using sender 'RFC' communication channel & an 'RFC'destination of type 'T'(with parameter registered server program,gateway host,gateway service)

Hi rasmiraj tripathy,
I am also facing the same problem (Sender or Payload is missing) while integrating R3 to B1 using IDOC. When I resend IDOC, it capture by B1iSN but doesn't work, it gives me error. When I look into xml document, it is found that there is no receiver payload.
My R3 system is non-unicode and it is difficult to change it to unicode as it requires updation.
Can you please confirm that this error is coming due to Non-Unicode, and can be resolved by setting it to Unicode.
Note: There is no double definition of any object.

Only HTTPS requests are working for SOAP Sender and HTTP not working

wHi Experts,
We have enabled our HTTPS port ( SSL ) in NWA -- >> Security -- >> SSL and Key stores. So understanding is HTTPS port is now enabled on top of HTTP. So PI should be able to cater requests at both ports.
Now, we have developed a synchronous SOAP to RFC scenario and downloaded WSDL file. This file has both links -
a. http:<host>:<port>
b. https:<host>:<port>
We intend to make a PI system where both ports can work. Now questions.
1. When we test web service exposed from PI using SOAPUI tool, only HTTPS works fine and gets the response back. If we try HTTP URL, an error is encountered - HTTTPS scheme is required.
2. Is this whole understanding that both ports ( HTTP, HTTPS ) should be able to operate simultaneously correct ? Or this is not at all possible ?
3. In SOAP Sender, we tried selecting all 3 options - 1. HTTP 2. HTTPS without client authentication 3. HTTPS with client authentication.
None of the options have any effect on testing, Each time, only HTTPS request works and HTTP doesn't.
Can anyone please provide some hints for troubleshooting ?
Thanks..
regards,
Rajagopal.

The error "HTTPS scheme is required" is normally returned when the HTTP Security Level on the SOAP adapter is not set to "HTTP". I can see you have mentioned you have tried all these, maybe a cache refresh has gone wrong? Could try recreating the channel with just HTTP specified as security level and this should allow HTTP or HTTPS
I assume you are using a different port number for your HTTP and HTTPS requests from SOAP UI. Normally the HTTPS port is the same as the HTTP port number but the final zero changed to a 1 i.e. https://<host>:50001 instead of http://<host>:50000.
You should be able to confirm both HTTP and HTTPS work OK by loading some of the system webpages in a browser over HTTP and over HTTPS i.e. http://<host>:<port>/nwa and https://<host>:<port>/nwa
Chris

Sender RFC scenario not working

Similar Messages

Maybe you are looking for