File to Rfc scenario,not updated in rfc

Hi,
File to RFC scenario,not updated in RFC?
i checked communication channels ,smq1,smq2,sm58,cache refresh.but issue was not solved.
Please advise where need to check?
Thanks
Amita

Hi Amita,
First check whether the configuration between PI and ECC has been set up properly.
Are you using a stand RFC or custom RFC?
Import the RFC metadata from ECC to PI and use that structure in your service interface and configure the remaining objects that we normally do.
Now, try to process the file and check in the communication channel, whether file Adapter is able to pick up and send the message to PI system.
If the message is successfully processed through PI system then check the messages in Queues. Also, check the RFC communication channel in the adapter engine.
Follow the process, you might get some clue regarding the issue.

Similar Messages

File to db scenario not getting out put

In file to db scenario not getting output(mysql db). giving error for receiver dat there is no action attribute in xml docment..
what could be da reason??

The XML document must have the following schema in this case:
<root>
<StatementName1>
<dbTableName action=UPDATE | UPDATE_INSERT>
<table>realDbTableName</table>
<access>
<col1>val1</col1>
<col2>val2new</col2>
</access>
<key1>
<col2>val2old</col2>
<col4>val4</col4>
</key1>
<key2>
<col2>val2old2</col2>
</key2>
</dbTableName>
</StatementName1>

File to RFC Scenario - Not working with AAE

I have a File to RFC Scenario (calling RFC /POSDW/CREATE_TRANSACTIONS_EXT) using AAE but it is failing with following error in PI .
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
But When I run the same scenario using IE instead of AAE, it is successful from PI. So probably there is nothing wrong in RFC channel configuration.
There's an OSS note-730870 on this error ,it says the XML document sent to RFC Adapter may not be RFC-XML but as I am using AAE, payload generated after technical routing cannot be viewed.
Could you all please suggest why this error is coming and solution for the same?
Thanks,
Ankit

Hi Debashish,Monica,
Thanks for your help, I checked this SAP note its question 16 do describe my problem but do not provide solution and as I am using AAE it does not allows me to see the target structure generated whereas if I use IE the target structure generated is sucessfully getting posted.
Also, the functional module is present in target system. I have reimported the RFC also.
Is there some AAE related configuration required to enable AAE with RFC which could be missing?
This is what I get in log as the RFC reciever is called..
06.09.2011 14:15:31 Information MP: entering1
06.09.2011 14:15:31 Information MP: processing local module localejbs/RfcAFBean
06.09.2011 14:15:31 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
06.09.2011 14:15:31 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
06.09.2011 14:15:31 Error Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
Thanks,
Ankit

SOAP to RFC Scenario (automatic updation)

Hi All,
I have a requirement, i.e we have a web system. In that gold rates will update in every one hour.
When ever the update will happen that should be update in SAP system via RFC call automatically.
Here sender side I am using SOAP adapter.
I know the process to do the soap--rfc scenario.
But how the gold rates will updates automatically in SAP system, with out triggering some one?
can any one guide me to do this scenario.......
Thanks in advance......

Hi Maridu,
yes with availibility time planning you can choose daily: monday, tuesday, not wednesday (for instance), thursday, etc.., plus for these day, a run which begins at 17:00 during 4 hours (for instance)... so to define a range, but that, it's mainly usefull with a FILE adapter as we have a polling (e.g every 60S or 3600S = 1h).
but as you, you use a sender SOAP, and if I'm not wrong (I have not a PI under eyes just now) you have not a polling. So a solution should be to define several availibility-time plannings (one per hour) on your same sender CC. Low work effort and easy to do.
Another solution is to not use availlibility-time planning, but to define your sender CC as "external" in "RWB -> CC monitoring", and to use an external tools (*) to trigger externally this sender CC, in fact to call an HTTP address by passing the "party | businessComponent | Sender CC" plus an action (STOP or START, this CC). There are several blogs on SDN to know how to trigger externally a CC (sender or receiver).
(*) external tool can be a unix command (wget), or a scheduler tool (to buy) like $universe (for instance) or eventually a sap job which run an abap program which call this HTTP address.
regards
mickael

File to IDOC Scenario Not able get Metadata (IDX2)

Hi,
I am doing File to IDOC scenario. I have done all configurations in IR and in ID. But it is throwing error like ATTRIBUTE_IDOC_METADATA-Basic type ZOIDOC does not exist.
Where as my custom idoc is a not exit in metadata (IDX2). Also I am trying to reload same manually but I am not able to reload it. I have all required configuration in SAP R/3 side like partner profile.
I would appreciate yours inputs.

Hi Sunil,
You are saying that you are unable to load the Metadata even manually.
There could be a problem with the RFC destination defined within the IDX1 port. So first test the RFC destination using SM59.
Also ensure that you have used the right naming conventions for the PORTS and RFC destinations as below:
<SID>CL<ClientNo> e.g DXXCL055 where DXX is the SID and 055 is the Client No.
Rgds
RC

XI to RFC Scenario: Runtime error during RFC Call

Hi,
I am testing a XI-to-RFC scenario involving BPM. The RFC works perfectly from SE37; but I get 'ICM_HTTP_TIMEOUT, Error code 402' when I invoke it from XI. On digging through the problem, it appeared that the calling program produced a short dump at the ABAP end. The code is as follows:
module %_rfcdia_start output.
 "Do not display screen !
 call 'DY_INVISIBLE_SCREEN'.
 perform remote_function_diastart.
endmodule.
module %_rfcdia_call output.
 "Do not display screen !
 call 'DY_INVISIBLE_SCREEN'.
 perform remote_function_diacall.
endmodule.
module %_cpic_start.
if sy-xprog(4) = '%RFC'.
 perform remote_function_call using rfctype_external_cpic.
else.
 call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
 perform cpic_call using convid.
endif.
endmodule.
form cpic_call using convid type c.
communication send id convid buffer header.
if sy-subrc eq 0.
 perform (sy-xform) in program (sy-xprog).
else.
 message a800.
endif.
endform.
form remote_function_call using value(type).
data rc type i value 0.
do.
********This is the line where error occurs************
 call 'RfcImport' id 'Type' field type.
 if sy-xprog = 'JAVA'.
 system-call plugin
 id 'JAVA' value 'FORW_JAVA'
 id 'RC' value rc.
if there is no rollout on the JAVA side which
rolls both, JAVA and ABAP, we return to the
C-Stack and reach this point
in case there was an rollout, the ABAP-C stack is lost
and we jump direkt to this point
here we trigger the rollout on this Abap side with
the following statement
 system-call plugin
 id 'JAVA' value 'ROLL_OUT'
 id 'RC' value rc.
 else.
 perform (sy-xform) in program (sy-xprog).
 rsyn >scont sysc 00011111 0.
 endif.
Anybody has any idea why it is happening? Is it a network issue? The dump in ST22 says that 'The program "SAPMSYS1" was terminated manually'. How it is possible to manually abort an automatic call?
Awaiting reply.
Regards.

Hi,
Probably because of timeout, it is unable to execute the request ..so it is aborted.
btw, is it a synchronous call ? what is the message size ? the given data to RFC is correct and valid structure ? check the mapping .for this use the data from SXMB_MONI and test it
Check this blog for timeout errors-
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
moorthy

File to IDOC scenario not working

I have configured a file to idoc scenario and kept the XMl file in a shared location on XI server.
I have also created and checked the communication channels correctly.
Once Everything is done my xml file does not get picked up at all. Also the SXMB_MONI does not show any messages for my service.
How do I find out what is the error ??

Hi Kapil,
Just check the File path that was in shared location once and the file name is properly mentioned or not..
And also one thing after activating all IR and ID just goto SXI_CACHE and press F6 to update cache refresh
And also in RWB --> Message Monitoring --> Adapter monitoring --> check the status of the sender
Regards,
Sridhar

Sites files are examined but not updated.

So here is my issue, I am trying to add some code to a dreamwever template file (.dwt) and when I go to update the site it examines all of the files but does not update them. The code is not placed in an editable region. The template is based off another template so to add the code I did have to open the file in notepad. I then reopened it. The idea is to try to avoid having to edit the original template because it would effects hundreds of pages on the site. Any help would be appreciated.
Thanks

The template is based off another template so to add the code I did have to open the file in notepad.
There is no natural scenario I can think of that would require that you do this. When you say the code is based off another template do you mean that you are using nested templates? And what is it you are trying to accomplish?

Sender RFC scenario not working

Hi All,
I'm trying to configure a scenario where the sender is an RFC. I have done the following configuration steps:
1. Created an RFC destination in the R/3 system.
 Program ID: SAPSLDAPI_X3A
 Gateway Host: hostname of the XI system
 Gateway Service: Gateway service of the XI system
2. In the RFC Sender channel
 App Server Gateway: R/3 system's hostname
 App Server Service: of the R/3 system
 Program ID: SAPSLDAPI_X3A
3. In the RFC Metadata Repository Parameter, the details of the R/3 system is provided.
4. The RFC is triggered by calling a report program specifying the RFC destination.
But no messages are coming to the message monitor. Is anything wrong here or is something missing? Is there any way to see what happened in the R/3 system?
Could you please help?
Thanks,
Priya

Hi,
1. Created an RFC destination in the R/3 system.
Program ID: SAPSLDAPI_X3A
Gateway Host: hostname of the XI system
Gateway Service: Gateway service of the XI system
This is fine.. I would recommend you to use different name coz SAPSLDAPI is a RFC destination name for SLD communication purpose. Its better to avoid using some system names. But this is not a problem.
2. In the RFC Sender channel
App Server Gateway: R/3 system's hostname
App Server Service: of the R/3 system
Program ID: SAPSLDAPI_X3A
The App Server Gateway, App Server Service & Program ID should match with what you have given in the RFC destination of R/3 system.
After this try doing a test connection from the RFC destination sm59. Your test should be succesful.
3. In the RFC Metadata Repository Parameter, the details of the R/3 system is provided.
This is fine
4. The RFC is triggered by calling a report program specifying the RFC destination.
This is also fine.
Also in order to see any messages in SXMB_MONI you need to enable Logging. Trace level = 3 will not capture the Sync message. RFC is by default Sync. If your sender is not expecting any response then you will get an error in the response message, in this case you need Async.
For Async you need to add this addition while doing the call function "IN BACKGROUND TASK". Also make sure you re mentioning the destination while doing the call function.
Check you have mentioned
DESTINATION <rfc destname>.
Thanks,
Prakash

Why do my edits/changes to files outside of Lightroom not update inside Lightroom?

I'm using version L1.4.1 on a Mac and have noticed that if I bring in a RAW file (either CR2 or DNG) to Lightroom, but then have to make edits/changes to it in a program outside of Lightroom, say Photoshop CS3 (RAW reader) later, it won't update the file and its new changes inside Lightroom unless I were to 'remove' the file from the library altogether and reimport it. With jpgs however, they update will be made, why is that and is there a way to do it?

Did you notice lrdata file in your catalog folder? The lrdata file holds previews of your images – but not the original images.
When you work with images in Lightroom: change levels, apply templates, etc – all of them run very quickly, and are completely reversible. You can go back in the process because LR DIDN'T CHANGE original files itself. Instead it stores them into lrcat and lrdata files.
LR uses these files to show you previews you see when browsing the catalog. As long as LR doesn't know the file has changed, it shows you an older preview.
As far as I remember, you can use the Library - Previews menu item to force LR to rebuild previews from updated files you upload.

CSS file in document library not updating

I have a sharepoint 2010 team site. There i created a document library named Style Library to store CSS files.
I uploaded a file name site.css in the document library. This worked fine.
Later on i updated my css file and uploaded to the same library but new style did not impacted.
I tried to library version settings and site publishing feature but nothing helped.
The workaround i found is to change the file name and uploaded which worked fine.
Another thing i noticed is: When i downloaded thee css file from library using "download a copy" link it had my new styles but when i clicked the file name and downloaded it did not have my new changes.
Could someone suggest something, i don't want to change file name again and again.

Hi Mohit,
This is due to cache problem. Please go through following post where it was explained nicely and a solution was suggested for this problem using Query Strings:
http://www.sharepointnutsandbolts.com/2011/11/avoiding-bugs-from-cached-javascript.html
Please don't forget to 'mark answer/propose answer' or 'vote as helpful' as appropriate.

Modified files on NAS do not update in finder

We have four mac pros running 10.7.5 with final cut studio. Our media is on a NAS that all four systems access. We have a problem when we rename files on one system and the changes do not show up on the other three systems. The only work around we have found is to restart the mac. We just tried an application found online called "Refresh Finder" that got very positive reviews but that doesn't seem to do anything (or it's being installed and used incorrectly). Does anybody have suggestions on how to solve this problem. It would be a big help.
Thanks,
Mike

The Time Capsule is for your backups.
Three things....all bad...happen when you try to move the iTunes Media Folder to the Time Capsule disk.
1) Access to media becomes much slower....typically 15-20 seconds before you will hear the song that you selected.
2) The iTunes Media Folder tends to get lost, so you will have to manually reset the path to the folder frequently.
3) When.....not if....the Time Capsule disk has a problem, you will lose all of your iTunes data.....because you have no backup of the ITunes Media Folder.
I've learned each of these things the hard way. If you still want to do this.....here are the instructions:
http://support.apple.com/kb/ht1449

HT4796 i have successfully migrated the music but it just shows up in my files and has not updated my iTunes library which is still getting the music from iCloud and is not using the migrated files. Any ideas?

I have successfully used windows migration software to move my music library from a PC to my MacBook Air.
However the music files are just stored in my file system and have not updated my itunes files. Itunes is still getting the music down from icloud instead of using the music files.
Any ideas?

If you're using Windows Movie Maker and HP Photo to build slide shows, this is not an iPod touch issue (nor an iTunes issue), so I'd suggest you take up the problem on a web site that deals with Movie Maker or HP Photo issues. It's really not something we can help with in this forum.
If you're building this slide show on your iPod, please post back and tell us what app(s) you're trying to use, and whether the iPod app on your iPod touch shows and plays your songs correctly. Knowing the specific model of iPod you have and the version of iOS it's running will probably also help.
Regards.

ITunes not updating audio files on iPhone 4s

On Mac 10.7.2, iTunes 10.5.1, and iOS 5.0.1. I have made changes to the genre of a few of my audio files but they are not updating on iTunes. iTunes appears to go through the entire process of syncing but no changes are made. I'm assuming I'm not the only one this has happened to so are there any known solutions?
Thanks!

oh no!! try doing a reset

Files using template not updating after moving

On this site "C" (see link) site I want to move the Template&Library folder and get them inside the local root folder, which is actually "Os". When I move it in DW the links are updated nice - but when I change the template, the files using it are not updated. Anyone care to tell me how to move these two folders to Os folder and not experiencing this problem?
http://302.se/3839

You should never had a folder named "public_html" in a properly defined site.
And "Os" is not the root folder of the C site. You would need a NEW site definition with Os as the root for the Templates to work properly.

File to Rfc scenario,not updated in rfc

Similar Messages

Maybe you are looking for