Sending a custom class to an ActiveX callback VI

I have a bunch of numerics / bools / strings I needed passed to an ActiveX callback VI (via the Reg Event Callback primitive). So, I used "To More Generic Class" and put them all as "Generic" then put put them in an array as the primitive's Parameter. I typecasted them back in the callback VI via To More Specific Class (this the best method?). That worked fine.
But now I want to also pass a custom labview class I have made. I can cast to generic, but I can't seem to get it back on the other end - how does one go from generic -> MyCustomClass type? See the image for what I want to do.
Attachments:
BAD.png ‏22 KB

OK well I managed to get this to at least compile. Not sure if this is "correct" - I just made a dummy control of the class I wanted, then right-clicked to make a reference, then used that. Seems pretty inelegant.
Attachments:
PossibleSolution.png ‏28 KB

Similar Messages

How to create a ActiveX Object with custom classes

Hi
I am trying to create a Active X object for some of the work I have done in Java to be used with VB, but I cannot get the Active X object to generate and it always come up with the following error:
Exception occurred during event dispatching:
java.lang.NoClassDefFoundError: uk/co/agena/minerva/model/Model
at java.lang.Class.getMethods0(Native Method)
at java.lang.Class.getDeclaredMethods(Unknown Source)
at java.beans.Introspector$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.beans.Introspector.getPublicDeclaredMethods(Unknown Source)
at java.beans.Introspector.getTargetEventInfo(Unknown Source)
at java.beans.Introspector.getBeanInfo(Unknown Source)
at java.beans.Introspector.getBeanInfo(Unknown Source)
at sun.beanbox.JarInfo.<init>(Unknown Source)
at sun.beanbox.JarLoader.createJarInfo(Unknown Source)
at sun.beanbox.JarLoader.loadJar(Unknown Source)
at sun.beans.ole.Packager.loadBean(Unknown Source)
at sun.beans.ole.Packager.generate(Unknown Source)
at sun.beans.ole.Packager.actionPerformed(Unknown Source)
at java.awt.Button.processActionEvent(Unknown Source)
at java.awt.Button.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForComponent(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForComponent(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
This appears to be beacuse the class uk/co/agena/minerva/model/Model is a custom class which is based on the software I am using. Does anyone know how I can get around this issue. I have tried incluijng those class files for the custom classes within the jar file, but I continue to get the same issue?
Any help would be gratefully received.
Thanks
Angie

This error is no longer coming up, it is now saying that it has an unsupported class version error. I believe this may be because the class file and library files have been complied under different versions, is there a method to check this?

Reproducing Incident Form Elements in a Custom Class

Hello again everyone,
I am trying to rollout a completely separate module in SCSM to record MACD (Move/Add/Change/Delete) requests. I decided to use the OOB incident module as my base class as it already contained many fields I require (I inherited the properties
and relationships) and created a new form assembly in Visual Studio to wire the properties to.
After created the form and labels, I imported the .dll into the Authoring Tool so I can just drag out each property from the MP explorer onto the form. Everything works except for the last few fields which are a bit more complex than a standard list or textbox.
I cannot seem to add the controls for the more complicated items like "Affected Services" or "Affected Items", when I try to drag them out to the form I get an error saying cardinality is not set to 1... I am guessing this is because
its trying to map a relationship between a workitem and a service instead of my custom class and a service...
So I went back into Visual Studio and added a ListView to the form, thinking I will have to wire the data bindings inside the form itself. However, I am stuck as I am not sure where "Services" are being written to, as I will need this location
to reference in my empty ListView. I have provided my code and commented where I believe I am missing logic. Thank you in advance for any help!
Note: "servicerelatestoworkitem" is not actually an object, my logic is conceptual and I still have not found which class/object the list of services is being written to.
C# Code containing button logic (an add button to add a service to the ListView, and a delete button to remove a service from the ListView.
private void add_services_button_Click(object sender, RoutedEventArgs e)
   // Open list of Services here, allow user to pick a service, then add selected service to "servicerelatestoworkitem"
   // AffectedServicesListView is populated from servicerelatestoworkitem
private void del_services_button_Click(object sender, RoutedEventArgs e)
    // Test to see if item is being selected and display selected item to confirm ability to manipulate variable
    try
        var itemSelected = ListView.GetIsSelected(AffectedServicesListView);
        MessageBox.Show(itemSelected.ToString());
    catch (Exception ex)
        MessageBox.Show(ex.Message);
    // Remove selected item from servicerelatestoworkitem and refresh AffectedServicesListView
XAML Code containing the list view and two buttons: (Note: The binding is most likely incorrect, I was just experimenting with it)
<ListView x:Name="AffectedServicesListView" HorizontalAlignment="Left" Height="95" Margin="10,414.6,0,0" VerticalAlignment="Top" Width="521" ItemsSource="{Binding Path=AffectedServicesListView, Mode=Default, UpdateSourceTrigger=PropertyChanged}">
                        <ListView.View>
                            <GridView>
                                <GridViewColumn/>
                            </GridView>
                        </ListView.View>
                    </ListView>
                    <Button x:Name="add_services_button" Content="" HorizontalAlignment="Left" Margin="470.55,382.749,0,0" VerticalAlignment="Top" Width="27.674" Height="26.851" Click="add_services_button_Click" BorderBrush="{x:Null}">
                        <Button.Background>
                            <ImageBrush ImageSource="add.png"/>
                        </Button.Background>
                    </Button>
                    <Button x:Name="del_services_button" Content="" HorizontalAlignment="Left" Margin="503.224,382.749,0,0" VerticalAlignment="Top" Width="27.776" Height="26.851" Click="del_services_button_Click" BorderBrush="{x:Null}">
                        <Button.Background>
                            <ImageBrush ImageSource="delete.png"/>
                        </Button.Background>
                    </Button>

Cardinality is a property of relationships classes, not a property of specific relationships. each type of relationship has it's own cardinality values, but the engine only really recognizes "one" and "many". it makes sense to say that
the "affected user" relationship is many to one, because Each work item can have one and only one affected user, but each users may be the affected user of many work items. The Related work items relationship is a many to many, because each workitem
may be related to many other work items. it doesn't make sense to say this specific relationship between this IR and that user is "many to one", because each instance is only between one specific object and another specific objects. the cardinality
just controls how many of those specific relationships instances can exist for each type of relationship.
There are no out of the box controls for many to many relationships. the Instance Picker control is designed to support one to one and many to one relationships. you'd have to write your own controls for support many to one relationships. Consider Travis
Wright's SR Example for 2010, since most of this code should execute in 2012 and 2012r2 with only minor modifications.
You'd have to either find the control that defines it, like with the history tab, or recreate it using the
authoring tool or
Visual Studio.

Creating custom classes from a more complex DTD

Are there any examples of creating more complex custom document types? The sample in the dev. guide and the xml syntax are a good start but not enough.
If anyone has an example from their own work, I'd appreciate it. You can send them to [email protected]
Thanks!

I'm having trouble gaining access to the content of those objects within a multilevel tree structure once the XML file has been loaded into the database. Those attributes off root via an editing tool or jsp/bean are rendered; however, the branched object structures are not. Instead the following is in its place: <MYClASSOBJECT2 RefType="ID">7265</MYClASSOBJECT2>
Here is some background. All custom classes have been successfully loaded into iFS, including the branching objects, which have been entered as extensions of Document as well as the associated ClassDomain entries. I've read Mark's PencilObject entry of June 23, but I continue to get undesired results. Currently, I am using SimpleXMLRender and am inclined to believe that I will need to customize the renderer for it to recognize the deep structures within my XML. Can you shed any light on my situation? In a nutshell, how do I gain access to the content within my multilevel XML?

InsufficientMemoryException while sending large byte array in WCF Service callback

Hi
I have a datacontract with a large byte array that is passed by the WCF Service back to the client using a callback contract.
Until the byte array size remains below 25-30 MB, it is passed OK, but as soon as it exceeds that, an InsufficientMemoryException is thrown on the service side. I have set the max message sizes at 100 MB and using MTOM Encoder.
I am using WSDualHTTPBinding with sessions and message security - hence streaming is not an option. I know chunking channels are an option, but I want to try to tune the service and client to maximize the byte array size which can be sent over a normal channel.
Kindly advise how to tune settings to get to around 100 MB byte array size.
Binding section of web.config is given below. Same settings for sizes are used on client.
Thanks
Abhishek
<wsDualHttpBinding>
        <binding name="WSHttpBinding_IService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false"
transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="100000000" maxReceivedMessageSize="100000000" messageEncoding="Mtom" textEncoding="utf-8" useDefaultWebProxy="true">
          <readerQuotas maxArrayLength="100000000" />
          <security mode="Message">
            <message clientCredentialType="Certificate" algorithmSuite="Default" />
          </security>
        </binding>
      </wsDualHttpBinding>

Hi abhisinghal21,
>>InsufficientMemoryException while sending large byte array in WCF Service callback
First please try to increase the timeout value in the both client and service side to see if it works:
closeTimeout="00:10:00" openTimeout="00:10:00"
receiveTimeout="00:10:00" sendTimeout="00:10:00"
Then since you do not want to the use the Chunking option to help you, maybe you try to change the wsDualHttpBinding to use the binding which supports the streaming mode and supports callback.
In streaming transfer mode, the receiver can begin to process the message before it is completely delivered. And the streaming mode is useful when the information that is passed is lengthy and can be processed serially. Streaming mode is also useful when the
message is too large to be entirely buffered. So it will be better for you to use the streamed mode.
For more information, please try to check:
#How to: Enable Streaming:
http://msdn.microsoft.com/en-us/library/ms789010(v=vs.110).aspx .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Webservice invocation - Custom class

Hi,
I am new to Jdeveloper and iam trying to invoke a webservice which does insert operation. I am invoking webservice using webservice data control mechanism.
In my data control pallette i have a method called conInsert(Object,String) where it takes two parameters
1) first parameter is of type java.lang.Object ( some custom class) - SiebelMessage_ListOfContactInterface_Contact
2) second parameter is of type java.lang.String - statusObject
WSDL entry for the conInsert operation:
<message
name="ConInsert_Input"
<partname="SiebelMessage"
type="xsdLocal0:ListOfContactInterfaceTopElmt"
</part
<partname="StatusObject"
type="xsd:string"
</part
</message
<messagename="ConInsert_Output"
<partname="SiebelMessage"
type="xsdLocal0:ListOfContactInterfaceTopElmt"
>
Now i need to create a form which accepts above specified fields and submit the form using conInsert (webservice operation). How can i create form accepting first and second parameter ?
Should i drag conInsert(Object;,String) method from Data control pallette to my jspx page ?
Can anyone help me with the solution.
Regards,
Ahmed.

Shay,
I have tried the blog post url by Susan Duncan and i was able to map the fields through backing bean and through creating web service proxy. But while hitting the submit buttion i was encounted with below error.
JBO-29000: Unexpected exception caught: java.rmi.RemoteException, msg=Error parsing envelope: (1, 1) Start of root element expected.; nested exception is: javax.xml.soap.SOAPException: Error parsing envelope: (1, 1) Start of root element expected.*
Error parsing envelope: (1, 1) Start of root element expected.; nested exception is: javax.xml.soap.SOAPException: Error parsing envelope: (1, 1) Start of root element expected.*
I am not sure about why iam getting this error ?
btw, i have analyzed the sending and receiving packets from http analyzer
here is the request:
<?xml version = '1.0' encoding = 'UTF-8'?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://siebel.com.fmw1" xmlns:ns1="http://www.siebel.com/xml/Contact%20Interface">
<env:Body>
<ns0:ConInsert>
<SiebelMessage>
<ns1:ListOfContactInterface>
<ns1:Contact>
<ns1:Id>332</ns1:Id>
<ns1:FirstName>asdf</ns1:FirstName>
<ns1:LastName>asdf</ns1:LastName>
</ns1:Contact>
</ns1:ListOfContactInterface>
</SiebelMessage>
<StatusObject>asdf</StatusObject>
</ns0:ConInsert>
</env:Body>
</env:Envelope>
Here is the response:
HTTP/1.1 200 OK
Date: Tue, 04 Aug 2009 14:12:04 GMT
Server: IBM_HTTP_Server
siebel-error-symbol-1: Unknown Error Symbol
siebel-error-message-1: Invalid external service source 'WebService'. Check the server configuration or the request.(SBL-UIF-00243)
Content-Length: 0
Content-Type: text/xml; charset=UTF-8
Could you please tell me is anything wrong with my config ? looks like iam not able to reach server???
Regards,
Ahmed.

DUNNING NOTICE SEND TO CUSTOMER EMAIL

hi
my requirement is whenever we run the dunning notice (F150) this report send to customer mail ids and opened it in pdf format.
using smart form how can we write the coding
thanks
venu

check this thread
Dunning Question
Please search before posting questions, u would find most solutions in search itself

Unit testing: Mocking custom classes with null

Hi,
I was trying to save time on testing the usual hashCode() and equals() methods so I got this class: http://www.cornetdesign.com/files/BeanTestCase.java.txt
I altered it a bit as it wasn't handling standard classes only primitives.
Anyway, I got to the point to include my own custom classes.
I have to create a 'mock' object for my class properties, e.g. field.getType().newInstance()
Fine, but there are some tricky instances. E.g. when I'd like to create an instance of java.net.URL which takes a URL as String in the constructor.
This is almost impossible to automate as it has to be a valid URL format not just a random String.
So, I thought I set them to null, e.g.
assertTrue(o1.equals(o2))
as both properties are null.
Is this the right approach you think?
I welcome any suggestions.
My initial idea was to save enormous amount of time automating the hashCode() and equals() method tests as they took so long to write.
Thanks

Trouble would be that you are only testing the null branch of the equals or hashCode, which typically have to check for null, then if not null do an actual comparison.
It's worth the effort of learning to use a package such as EasyMock to create and program mock objects. It's tidiier if you are progamming to interfaces, however, but it will mock ordinary objects, though probably not if they are final.
What you could do is to define a factory interface, and have a table of anonymous classes wich generate various types. In effect create a library of dumy object factories.
Something like:
private interface DummyGenerator {
      Object generate(int idx);
      Class<?> getType();
private final static DummyGenerator[] generatorsTable {
    new DummyGenerator() {
           public Object generate(int idx) {
             return new URL("http://nowhere.com/" + idx);
     public Class<?> getType() { return URL.class; }
.. generators for other classes
private final static Map<Class<?>, DummyGenerator> genMap = new HashMap<Class<?>, DummyGenerator>(generatiorsTable.length);
static {
    for(DummyGenerator gen : generatorsTable)
        genMap.put(gen.getType(), gen);
}

Need help calling and looping custom classes

Hi, I am writing a code with custom classes in it and another program that calls upon all of the classes in the first program. I can get the second one (L6) to call upon and execute all of the classes of the first (Foreign). However, I need the second one to loop until quit is selected from the menu on Foreign and I can't seem to figure out how to do it. Here are the codes:
L6:
public class lab6
public static void main(String[] args)
Foreign camount = new Foreign();
camount = new Foreign();
camount.get();
camount.print();
camount.intake();
camount.convert();
camount.vertprint();
System.out.println(camount);
Foreign:
import java.util.Scanner;
public class Foreign
private String country;
private int choice;
private float dollars;
private float conversionValue;
private float conversionAmount;
public Foreign()
country = "null";
choice = 0;
dollars = 0;
conversionValue = 0;
conversionAmount = 0;
public void get()
     Scanner Keyboard = new Scanner(System.in);
          System.out.println("Foreign Exchange\n\n");
System.out.println("1 = U.S. to Canada");
System.out.println("2 = U.S. to Mexico");
System.out.println("3 = U.S. to Japan");
System.out.println("4 = U.S. to Euro");
System.out.println("0 = Quit");
System.out.print("\nEnter your choice: ");
choice = Keyboard.nextInt();
public void print()
System.out.print("\nYou chose " + choice);
public void intake()
     Scanner Keyboard = new Scanner(System.in);
          if (choice >= 1 && choice <= 4)
switch (choice)
          case 1: System.out.println("\nU.S. to Canada");
                    conversionValue = 1.1225f;
                    country = ("Canadian Dollars");
                    break;
          case 2: System.out.println("\nU.S. to Mexico");
                    conversionValue = 10.9685f;
                    country = ("Mexican Pesos");
break;
          case 3: System.out.println("\nU.S. to Japan");
                    conversionValue = 118.47f;
                    country = ("Japanese Yen");
break;
          case 4: System.out.println("\nU.S. to Euro");
                    conversionValue = 0.736377f;
                    country = ("European Union Euros");
break;
               System.out.print("\nEnter U.S. dollar amount: ");
          dollars = Keyboard.nextFloat();
public void convert()
conversionAmount = conversionValue * dollars;
public void vertprint()
System.out.println("\nCountry = " + country);
System.out.println("Rate = " + conversionValue);
System.out.println("Dollars = " + dollars);
System.out.println("Value = " + conversionAmount);
public String toString()
String line;
line = "\n" + country + " " + conversionValue + " " + dollars + " " + conversionAmount;
return line;
I appreciate any help anyone can give me. This is driving me crazy. Thanks.

1. first you need to write method to get choice value from Foreign class.
simply add this method.
   public class Foreign {
      // ... Add this
      public int getChoice() {
         return choice;
   }2. Then in your main, you can obtain with previos method.
public static void main(String[] args) {
   Foreign camount = new Foreign();
   // remove this. you alredy create an instance in last statement.
   //camount = new Foreign();
   int choice = 0;
   do {
      camount.get();
      choice = camount.getChoice();
      // your process...
   } while (choice != 0);
}

Use of deployment classpath or shared-libraries to pick-up "custom" classes

Hi,
I’m trying to determine an approach to dealing with how classes are found in a deployed ADF application via classpath, etc. I’ve tried to explain the situation below as best I can so it’s clear. If you have any comments/suggestions as to how this could be done, it would be much appreciated
Current Application structure:
Consists of an application initially deployed to OC4J 10.1.3.4 using an alesco-wss.ear file
Application contains a single Web Module, initially deployed as wss.war file within the alesco-wss.ear file above.
The Web Module (wss) was built in JDeveloper 10.1.3.4 using 2 projects, a Model and ViewController project, and uses ADFBC.
The Model project seems to also generate an alesco-model.jar file in the /WEB-INF/lib/ folder, even though Model classes are in the /WEB-INF/classes/ folder below?
Exploded structure of application on application server looks something like:
applications/alesco-wss/META-INF/
/application.xml <- specifies settings for the Application such as Web Module settings
/wss/
/app/ <- directory containing application .jspx pages protected by security
/images/ <- directory containing application images
/infrastructure/ <- directory containing .jspx files for login, logout and error reduced security
/skins/ <- directory containing Skin image, CSS and other files
/WEB-INF/
/classes/ <- directory containing application runtime class files as per package sub-directories
/lib/ <- JAR files used by application (could move some to shared-libaries?) – seems to contain alesco-model.jar
/regions/ <- directory containing .jspx pages used for Regions within JSPX template page
/templates/ <- directory containing template .jspx pages used for development (not really required for deployment)
/adf-faces-config.xml
/adf-faces-skins.xml
/faces-config.xml
/faces-config-backing.xml
/faces-config-nav.xml
/region-metadata.xml
/web.xml
testpage.jspx <- Publicly accessible page just to test
The application runs successfully using the above deployment structure.
We plan to use the exploded deployment structure so that updates to pages, etc. can be applied individually rather than requiring construction and re-deployment of complete .EAR or .JAR files.
What I’m trying to determine/establish is whether there is a mechanism to cater for a customisation of a class, where such a class would be used instead of the original class, perhaps using a classpath mechanism or shared library?
For example, say there is a class “talent2.alesco.model.libraries.ModelUtil.class”, this would in the above structure be found under:
applications/alesco-wss/META-INF/classes/talent2/alesco/model/libraries/ModelUtil.class
Classes using the above class would import “talent2.alesco.model.libraries.ModelUtil”, so they effectively use that full-reference to the class (talent2.alesco.model.libraries as a path, either expanded or within a JAR).
From the Oracle Containers for J2EE Developer’s Guide 10.1.3 page 3-17, it lists the following:
Table 3–1 Configuration Options Affecting Class Visibility
Classloader Configuration Option
Configured shared library <code-source> in server.xml
<import-shared-library> in server.xml
app-name.root <import-shared-library> in orion-application.xml
<library> jars/directories in orion-application.xml
<ejb> JARs in orion-application.xml
RAR file: all JARs at the root.
RAR file: <native-library> directory paths.
Manifest Class-Path of above JARs
app-name.web.web-mod-name WAR file: Manifest Class-Path
WAR file: WEB-INF/classes
WAR file: WEB-INF/lib/ all JARs
<classpath> jars/directories in orion-web.xml
Manifest Class-Path of above jars.
search-local-classes-first attribute in orion-web.xml
Shared libraries are inherited from the app root.
We have reasons why we prefer not to use .JAR files for these “non-standard” or “replaced” classes, so prefer an option that doesn’t involve creating a .JAR file.
Our ideal solution would be to have such classes placed in an alternate directory that is referred to in a classpath such that IF a class exists in that location, it will be used instead of the one in the WEB-INF/classes/ directories, and if not such class is found it would then locate it in the WEB-INF/classes/ directories.
- Can a classpath be set to look for such classes in a directory?
- Do the classes have to replicate the original package directory structure within that directory (<dir>/talent2/alesco/model/libraries)?
- If the class were put in such a directory, without replicating the original package directory structure, I assume the referencing “import” statements would not locate it correctly.
- Is the classpath mechanism “clever” enough to search the package directory structure to locate the class (i.e. just points to <dir>)?
- Or would the classpath mechanism require each individual path replicating the package structure to be added (i.e. <dir>/talent2/alesco/model/libraries/ and any other such package path)?
If we are “forced” to resort to the use of JAR files, does a JAR file used for the purpose of overwrite/extending a sub-set of classes in the original location need to contain ALL related package classes? Or does it effectively “superset” classes it finds in all JAR files, etc. in the whole classpath? That is, it finds talent2.alesco.model.libraries.ModelUtil in the custom.jar file and happily goes on to get the remainder of talent2.alesco.model.libraries classes in the other core JAR/location. Or does it need all of them to be in the first JAR file for that package?
Any help would be appreciated to understand how these various class visibility mechanisms could be used to achieve what is required would be appreciated.
Gene

So, nobody's had any experience with deploying an ADF application, and providing a means for a client to place custom classes in such a way as they're used in preference to the standard application class, effectively to implement a customised class without overwriting the original "standard" class?
Gene

COA to be send to customer while saving delivery.

Dear Friends,
I have a requirement of sending the certificate of analysis (finished product) to customer while saving delivery document.
COA is the developed form (Z development) designed and that output we need to send to customer through email as soon as the sales delivery document is saved.
To sum up my requirement :
I need to send COA through email as soon as delivery is saved.
Please provide your expert comments.
Best Regards,
Shekhar

Dear,
You want to send a quality certificate for the delivery to the Sold-to party.
Define the settings for the output types for certificates (LQCA and LQCB in the standard system):
Quality Management -> Quality Certificates -> Output Determination -> Define Condition Types for Output Determination
Enter the required communication strategy in the "Default value" tab page. Assign output determination procedure to delivery item category".
Define the assignments of the output types for certificates for the print program and transmission medium:
Quality Management -> Quality Certificates -> Process Output -> Assign Print Program to Output Type/Medium
Program RQCAAP00, FORM routine ENTRY, do not specify a form.
The standard system provides the universally applicable QM_QCERT_01 form.
The forms must be compatible with the output program. In the standard system the following output programs are available:
RQCAAP00 for certificates for a delivery item
You can access this program in Customizing for message dispatch and the program can be exchanged.
RQCAAP01 for certificates for an inspection lot
RQCAAP02 for certificates for a batch also you can use the FM 'QC02_BATCH_CHAR_SPECS'
SAPLQC07 for certificates for a batch on the Internet
For more details refer the OSS note 39418.
Regards,
R.Brahmankar

Add button to a datagrid with custom class

Hi.
I have a custom class that i put in the dataprovider to a datagrid. And when i column with buttons i get the following error.
ReferenceError: Error #1069: Property null not found on COMPONENTS.Output.OutputFile and there is no default value.
at mx.controls::Button/set data()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\controls\Button.as:873]
at mx.controls::DataGrid/http://www.adobe.com/2006/flex/mx/internal::setupRendererFromData()[E:\dev\3.0.x\framework s\projects\framework\src\mx\controls\DataGrid.as:1646]
at mx.controls::DataGrid/commitProperties()[E:\dev\3.0.x\frameworks\projects\framework\src\m x\controls\DataGrid.as:1606]
at mx.core::UIComponent/validateProperties()[E:\dev\3.0.x\frameworks\projects\framework\src\ mx\core\UIComponent.as:5670]
at mx.managers::LayoutManager/validateProperties()[E:\dev\3.0.x\frameworks\projects\framewor k\src\mx\managers\LayoutManager.as:519]
at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\3.0.x\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:669]
at Function/http://adobe.com/AS3/2006/builtin::apply()
at mx.core::UIComponent/callLaterDispatcher2()[E:\dev\3.0.x\frameworks\projects\framework\sr c\mx\core\UIComponent.as:8460]
at mx.core::UIComponent/callLaterDispatcher()[E:\dev\3.0.x\frameworks\projects\framework\src \mx\core\UIComponent.as:8403]
What shuld i do?
Thanks for help.

If you are talking SE54 and Maintenance Views, when I do an SM30 on the Maintenance View and do SYSTEM->STATUS, I see GUI STATUS ZULG on program SAPLSVIM. If you look at that status, I see two buttons with dynamic text. The first one is call GPRF and has dynamic text VIM_PR_STAT_TXT_CH. You can find a suitable PBO event to set the text of that function code and if that works, find a suitable PAI event to respond to that function.
I recall finding some documentation on customizing the GUI STATUS but no luck today trying to find it.
Let us know how it goes.

Xcode 6.1.1 Custom Class Outlets Missing

I'm running through the basic Apple tutorial on iOS App Development https://developer.apple.com/library/ios/referencelibrary/GettingStarted/RoadMapi OS/index.html#//apple_ref/doc/uid/TP40011343-CH2-SW1
Running Xcode Version 6.1.1 (6A2008a)
After creating custom View Controller and TableView Controller classes (Tutorial:Storyboards) I find that although the .m files appear in Build Phases they do not appear in the drop down menu for custom class. If I enter the name manually it correctly opens the .h files when clicking on the right arrow to the right of the custom name.
The standard outlets of View Controller (Search Display Controller & View), do not appear in the connections inspector of the custom class.
A test IBAction method does not appear as an option when connecting a Bar Button Item to the Exit object of the Custom View Controller.
Searching the internet for a solution I can find lots of similar stories with random work arounds, none of which have worked for me. However, most of these have been for previous versions of Xcode and one user reported that upgrading to 6.1 solved the problem.
I have redone this a few time to ensure that it isn't finger trouble and I do have a number of years of cocoa/Xcode experience, I'm just getting used to storyboards.
I have tried:
Clean project / Delete Derived Data / Relaunch Xcode
Delete references to .h & .m files of custom classes and then added them back in.
Is there any way of 'forcing' Xcode to recheck for Outlets and Actions in custom classes?

To find out where th problem is, either Xcode or something in your environment, you should try to run Xcode as a different user.
The guest account is ideal for this as your are sure you will get a clean environment. You could also make a new user account and try running from there. If Xcode starts then the problem is something in your original user environment. If Xcode fails to stsrt with the new account then there is a system wide problem.
BTW is your account an admin account or a regular account?
regards

Build app with ODT and Oracle UDT - Error while creating custom class

Hello CShay,
I am testing you sample code to create UDT with ASP.Net app. It is also published in Oracle magazine.
The article is also published at following link:
http://www.oracle.com/technology/oramag/oracle/08-may/o38net.html
I am able to successfully implement all the steps before "Using Custom Class Wizard". When I right click on any of the object (CUSTOMER_OBJ, PHONELIST_OBJ, and ADDRESS_OBJ) and select Generate Custom Class, I get the following error:
Oracle custom class wizard.
Class can be generated only for either C#, VB or Managed C++ projects.
Am I missing any thing?
Thanks in advance for your help.

Yes I confirm that I choose File->New Website.
I don't see the following option
File -> New Project, and then under Visual C#, select ASP.NET Web Application
I am using VS2005 Professional Edition.
The options I see under Visual C# are:
If I click on
Windows tab:
Windows Application
Windows Control Library
Console Application
Empty Project
Class Library
Web Control Library
Window Servcie
Crystal Report Application
and Search Online Templates in My Templates tab.
Couple of options for Smart Device which also doesn't include ASP.Net
then Database, Starter kits and Office tabs which also doesn't include ASP.net thing.
I don't know how did you see that option or you might be using different version of VS (Enterprise).
But right now I am stuck.
Please provide me your valuable comments.
Thanks for your help.

Issue while sending mails using classes

Hi Experts ,
i have one issue when i try to send mails using classes cl_document_bcs,cl_cam_address_bcs,cl_bcs etc
ISSUE :
i put some data in selection screen and i get some output ( say i got 5 records), i select 3 records and press some button to trigger mail and mail is send, and now again the OUTPUT screen is shown with sended records but we can not send these records again ............ now i selcect remaining two records and press button to trigger mail and THIS TIME MAIL IS NOT SEND.
amd my code is :
CREATE OBJECT l_document.
CREATE OBJECT l_recipient.
TRY.
      cl_bcs_convert=>string_to_solix(
      EXPORTING
      iv_string = fp_wa_output
      iv_codepage = fp_v_code_page
      iv_add_bom = 'X'
      IMPORTING
      et_solix = l_wa_output_binary
      ev_size = l_v_size ).
      l_send_request = cl_bcs=>create_persistent( ).
*-->Creating Document
      l_document = cl_document_bcs=>create_document(
      i_type = 'RAW'
      i_text = fp_it_content[]
      i_subject = fp_text_48 ) .
*-->Adding Attachment*
      CALL METHOD l_document->add_attachment
        EXPORTING
          i_attachment_type    = fp_text_049
          i_attachment_size    = l_v_size
          i_attachment_subject = fp_v_file
          i_att_content_hex    = l_wa_output_binary.
*-->Add document to send request*
      CALL METHOD l_send_request->set_document( l_document ).
*    do send delivery info for successful mails
      CALL METHOD l_send_request->set_status_attributes
        EXPORTING
          i_requested_status = 'E'
          i_status_mail      = 'A'.
*-->Get Sender Object
      l_uname = sy-uname.
      l_sender = cl_sapuser_bcs=>create( l_uname ).
      CALL METHOD l_send_request->set_sender
        EXPORTING
          i_sender = l_sender.
      LOOP AT fp_s_mail INTO l_wa_mail.
        l_v_objid = l_wa_mail-low.
        l_v_mail = l_v_smtpadr.
        TRANSLATE l_v_mail TO LOWER CASE.
        l_recipient = cl_cam_address_bcs=>create_internet_address( l_v_mail ).
        CALL METHOD l_send_request->add_recipient
          EXPORTING
            i_recipient = l_recipient
            i_express    = 'X' .
*            i_copy       = ' '
*            i_blind_copy = ' '
*            i_no_forward = ' '.
      ENDLOOP.
**-->Trigger E-Mail immediately*
*      IF fp_send_all EQ 'X'.
*        l_send_request->set_send_immediately( 'X' ).
*      ENDIF.
      CALL METHOD l_send_request->send(
      EXPORTING
      i_with_error_screen = 'X'
        RECEIVING result = l_v_sent_to_all ).
      BREAK TARK.
      IF l_v_sent_to_all = 'X'.
        MESSAGE i000 .
      ENDIF.
    COMMIT WORK.
    CATCH cx_document_bcs INTO l_bcs_exception.
    CATCH cx_send_req_bcs INTO l_send_exception.
    CATCH cx_address_bcs INTO l_addr_exception.
    CATCH cx_bcs INTO l_exp.
ENDTRY.
thanks in advance
rahul

Every time when i choose other network or dongle to send those mails it gets sent.
As per the description, seems it's an issue related to this specific network. Probably, they've adjusted their security policy, like blocked some port numbers, etc.
You might need to contact the support of your ISP to confirm what SMTP settings you need. Check port number, and security settings.
By the way, this is the forum to discuss questions and feedback for Windows-based Microsoft Office client. Since your query is directly related to
Office for mac, I would suggest you to post in the forum of
Office for Mac, where you can get more experienced responses:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Sending a custom class to an ActiveX callback VI

Similar Messages

Maybe you are looking for