Sending email with attatchements

hi everyone,
Im having difficulties sending an email with an attatchment. Basically what im trying to do is send a web pages HTML along with 2 pdf files. The html i send should result in the email looking like a webpage with 2 files added as attatchments. Ive looked at sample code but basically i am i cant get it to work. If someone has sample code or has a web link showing how to do so that would a a lot of help.
thanks

it's very easy using javamail api .
In the Following link sedn code has been given .
http://www.javacommerce.com/articles/sendingmail.htm
i hope it will help you .
Sanjay

Similar Messages

TS3899 Cannot send email with new iPad air. Works fine with old iPad and iPhone.

Cannot send email with new iPad air. Works fine with old iPad and iPhone. I have deleted account and reinstalled.

Thanks. I got the problem fixed. Spent time with the Apple folks and was kicked up to a senior advisor. It seems the problem was with my internet provider - Tmie Warner. Remember I could use the old ipad and the iphone to send mail. I checked all the specifics between the three units. It seems that TW is changing over from the RR.com to TWC.com. Since the new ipad air was just set up, it fell under the new TWC mail specifics.

How do I use my iPhone's hot spot to send email with Mail ?

Hi,
My land line is dead ... so no phone nor internet at home. But I can use my iPhone'hot spot to get on the web from my iMac. Great ... it works !
Oups ! I cannot send email from my computer using my iPhone's hot spot with Mail.
How do I do that ?
Regards.
Robert Lespérance

Hi Templeton Peck,
Thanks for droping in my thread ...
Doesn't the fact that I can surf the web with my iPhone's hot spot and that I cannot use Mail normally has I normally do give you a clue what the problem could be ?
What other information can I give you other than normally I can surf and send email with my regular ISP. Now that my ISP is dead I am using my iPhone's hotspot to surf the web awaiting that my ISP's connoection returns. Surfing is OK but I cannot send emails with through Mail.
When I want to send an email from my computer, I get a message asking me to select the the SMTP server. Then I select my usual ISP server, but the message comes back telling me it does not work.
Is there any other configuration to do ?

I'm not able to send emails with mail.ru. Receiving and reading is not a problem. When I create a email with mail.ru its not possible to send it although its stored in my mail.ru account as "still to be send". What can it be??

I'm not able to send emails with mail.ru. Receiving is not a problem. Creating a mail is also not a problem and the mail will be stored at mail.ru as still to be send, only problem is its not possible to send. I noticed the buttons for sending change colour when used but they don't perform. What it is?

Don't know what changed, but all of a sudden able to send emails by mail.ru ...... sorry for bothering.

I have 2 email accounts the second one i have only recently added, i have sent one email from my second account but i cant seem to send anymore, it says "cant send email with selected server" i am still able to send emails from my first account. Any ideas

I have 2 email accounts, the second i only just recently added, i was able to send an email from this account after i added the account but am not able to send anymore emails. It says "unable to send email with selected server" there are no other servers to choose from. please help! TIA

Hi apmichael,
If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden

I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to sen

I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to send emails with photos embedded. I like adding the frames and backgrounds and I think it's easier for recipients to look at the photos. Thanks for any suggestions of things to try.
Gail

I had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.

Problems sending emails with iPhone 3G and outlook exchange

I have a problem sending email with exchange. Receiving and answering mail works fine and calender updates work fine. However when I initiate an email from the phone it syncs and ends up in the sent folder in the computer but never reaches the recipient. I have tried this many times with different recipients and phones. It only happens from my iphone and ipad. Any suggestions?
Any help much appreciated

The iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
Message was edited by: ethanm

Is there any problem to use multiple threads to send email with JavaMail

Dear all,
I am using JavaMail 1.3.2 to send emails with SMTP, it works very well for a long time.
But one day, I found that the email service hanged and I could never send email again until I restart the tomcat. I found that the reason was a deadlock had been created, the required resource for sending email had not been released.
I guess the error is due to multiple threads are sending email at the same time. I made a test to create seperate thread for sending each email. After few days, I found this deadlock happened again. So, my question is: Can I use JavaMail with multiple threads? If not, I may need to sychronized all the thread that using JavaMail. I would like to make sure this is the reason for causing the deadlock problem.
Here is part of my code for using JavaMail:
transport = session.getTransport("smtp");
transport.connect(email_host, smtp_user, smtp_pass);
message.saveChanges();
transport.sendMessage(message,message.getAllRecipients());
which is very standard call, and it worked well for a long time.
Here is part for my thread dump on tomcat:
(Thread-339)
- waiting to lock <0x5447c180> (a sun.nio.cs.StandardCharsets)
(Thread-342)
- locked <0x5447c180> (a sun.nio.cs.StandardCharsets)
It seems that these happened after call the method transport.sendMessage() or message.updateChanges()
, and the underlying implementation may require the JRE StandardCharsets object. But the object had been locked and never be released. So, the sendMessage() or updateChanges() can't be completed.
Please give me some helps if you have any idea about it.
Thanks very much!
Sirius

Note that the Nightly build gets updated daily (and sometimes more than once in case of a respin) and it is always possible that something goes wrong and it doesn't work properly, so be prepared for issues if you decide to stay with the Nightly build and make sure to have the current release with its own profile installed as well in case of problems.
See also:
* http://kb.mozillazine.org/Testing_pre-release_versions
*http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
*http://kb.mozillazine.org/Shortcut_to_a_specific_profile
*http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Sending emails with both body and attachment to multiple recipients

I have a requirement to send email with body and attachment to multiple recipients.
Body of the email is a standard text. It is a proxy-to-mail scenario.
Here is what I've done: (I'm using PI 7.11)
One mapping from Source to Target structure (format of the attachment text file)
Second mapping from Target Structure to Mail Package format.
In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
"XIPAYLOAD" is the message protocol used.
The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
How to send an email with both content and text?
The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
Thanks for any input you can provide!
Edited by: crazylad on Jan 18, 2012 3:39 PM

Thank you for your response Mikael.
For the first question, I was able to find the solution in the following blog:
XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
(I just needed to search with the right set of key words )
The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients.

XI Mail Adapter: sending emails with attachment with help of java mapping

Hi ,
On trying out the scenerio mentioned in the blog, using the java mapping provided
"XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
The scenerio works just fine.
But the payload as the content of the attachment is not getting generated in proper XML format.
I suppose it's because of the replace special characters code part..
Can anyone help me state the modification required in the code.
Thanks!
Regards,
Faria Mithani

It might be a codepage issue. Is your original payload UTF-8?

Sending email with 2 attachments in PDF Format

Hi,
I have 2 ALV Layouts, totally different in Structure.
Now I need to convert these 2 ALV layout to 2 different PDF files and send email with thses 2 attachments.
Can anyone provide me with sample report.
I tried searching for it but there is no clue for ALV report-> PDF -> email.
Thanks
Mohan

Hello,
I doubt if you really searched before posting. You will find many posts indicating how to convert your report output be it ALV or classical into spool and then in to pdf. After you get the pdf binary format, its pretty much the same attaching those and sending E-mail
Vikranth

Sending email with multiple attachments

Hi forum,
I am able to send email with a single attachment using maildemo.sql from: http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
But now I am trying to send email with more than 1 attachment and it does not work. My code that calls the above mentioned package is as follows:
<code>
PROCEDURE send (
psender VARCHAR2,
precipients VARCHAR2,
pcc VARCHAR2,
pbcc VARCHAR2,
psubject VARCHAR2,
pmessage VARCHAR2,
pnumattach NUMBER) -- The number of attachments that need to be sent
IS
p_blob BLOB;
p_filename VARCHAR2(200);
p_filetype VARCHAR2(200);
p_currSeq NUMBER;
conn utl_smtp.CONNECTION;
i NUMBER;
j NUMBER;
len NUMBER;
BEGIN
IF pnumattach > 1
THEN
conn := SEND_EMAIL_HELPER.begin_mail(
          sender => psender,
          recipients => precipients,
          subject => psubject,
          mime_type => send_email_helper.MULTIPART_MIME_TYPE);
j := 0;
SELECT seq_attach_transact_id.CURRVAL INTO p_currSeq FROM dual; -- seq_attach_transact_id is a primary key that identifies every single attachment in the table
WHILE (j < pnumattach) LOOP
p_currSeq := p_currSeq - j;
SELECT blob_content INTO p_blob FROM wwdoc_document WHERE transaction_id = p_currSeq;
SELECT name INTO p_filename FROM wwdoc_document WHERE transaction_id = p_currSeq;
SELECT mime_type INTO p_filetype FROM wwdoc_document WHERE transaction_id = p_currSeq;
SEND_EMAIL_HELPER.begin_attachment(
conn => conn,
mime_type => p_filetype,
inline => TRUE,
filename => p_filename,
transfer_enc => 'base64');
-- split the Base64 encoded attachment into multiple lines
i := 1;
len := DBMS_LOB.getLength(p_blob);
WHILE (i < len) LOOP
IF(i + SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH < len)THEN
UTL_SMTP.Write_Raw_Data (conn,
UTL_ENCODE.Base64_Encode(
DBMS_LOB.SUBSTR(p_blob, SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH, i)));
ELSE
UTL_SMTP.Write_Raw_Data (conn,
UTL_ENCODE.Base64_Encode(
DBMS_LOB.SUBSTR(p_blob, (len - i)+1, i)));
END IF;
UTL_SMTP.Write_Data(conn, UTL_TCP.CRLF);
i := i + SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH;
END LOOP;
SEND_EMAIL_HELPER.end_attachment(conn => conn);
END LOOP;
SEND_EMAIL_HELPER.attach_text(
conn => conn,
data => pmessage,
mime_type => 'text/html');
SEND_EMAIL_HELPER.end_mail( conn => conn );
ELSE
utl_mail.send(psender,precipients,pcc,pbcc,psubject,pmessage);
END IF;
END send;
</code>
Can anyone please tell me where am i going wrong.
Message was edited by:
Monk

The easiest is to send an e-mail with multiple attachments to yourself and then view the message in raw to see how it is formatted - how the boundaries work. what the boundary headers are, etc.
Then you use that as a template for your PL/SQL code to generate a MIME body for an e-mail that has multiple attachments.
To debug.. have your PL/SQL code send sample e-mails with multiple attachment to your account, view it in raw format and compare that to the original format you've based your template on.
And none of this is really a PL/SQL issue.. it is all about formatting a valid MIME message for an e-mail.

Sharepoint Online - Send email with attachment

Hi All,
is there some way how to send email with attachment, which is attached to list item in host web?
I tried some of solutions but none of them not working.
Server side:
For example event receiver after added list item with attachment - Because it is office 365, in SandBox solution I can´t use SmtpClient class.
Any other ideas?
Client side:
For example client web part with REST call. It works fine until I don´t need access to attachment.
string oDataUrlAttach = "/_api/Web/lists/getbytitle('ListName')/Items(6)/AttachmentFiles('Document.docx')/$value";
            HttpWebRequest itemRequestAttach = (HttpWebRequest)HttpWebRequest.Create(sharepointUrl.ToString() + oDataUrlAttach);
            itemRequest.Method = "GET";
            itemRequest.Accept = "application/atom+xml";
            itemRequest.ContentType = "application/atom+xml;type=entry";
            itemRequest.Headers.Add("Authorization", "Bearer " + accessToken);
            HttpWebResponse itemResponseAttach = (HttpWebResponse)itemRequestAttach.GetResponse();
Here I get error: The remote server returned an error: (403) Forbidden.
But other calls are OK. I can get all items from my list except attachments.
Any ideas?
Thank you.

Why hasn't this been answered?
Sam Ogle

To send email with editable PDF/XLS attachment

Hi All,
Is it possible to send editable PDF/XLS attachment in a mail to the customer via SAP, if yes how?
Please Help! Urgent

hi,
*Sending mail with attachment
* This program will allowed you to send email with attachment.
* First, specify the attachment file from your local hardisk and execute.
* Next, specify the sender email address and click the send button.
report y_cr17_mail.
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
text(4096) type c,
   end of g_files.
data : fold_number(12) type c,
       fold_yr(2) type c,
       fold_type(3) type c.
parameters ws_file(4096) type c default 'c:\debugger.txt'.
* Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
call function 'SO_USER_READ_API1'
exporting
   user                            = g_user
*    PREPARE_FOR_FOLDER_ACCESS       = ' '
importing
   user_data                       = g_user_data
* EXCEPTIONS
*    USER_NOT_EXIST                  = 1
*    PARAMETER_ERROR                 = 2
*    X_ERROR                         = 3
*    OTHERS                          = 4
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
g_objhead,
g_objpara,
g_objparb,
g_receipients,
g_attachments,
g_references,
g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr   = fold_yr.
g_document-folno   = fold_number.
g_document-objtp   = g_user_data-object_typ.
*g_document-OBJYR   = '27'.
*g_document-OBJNO   = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes   = 'sap-img.com testing by program'.
g_document-folrg   = 'O'.
*g_document-okcode   = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'sap-img.com testing by program'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
    method             = method1
   office_user        = sy-uname
   ref_document       = g_ref_document
   new_parent         = g_new_parent
importing
   authority          = g_authority
tables
   objcont            = g_objcnt
   objhead            = g_objhead
   objpara            = g_objpara
   objparb            = g_objparb
   recipients         = g_receipients
   attachments        = g_attachments
   references         = g_references
   files              = g_files
changing
    document           = g_document
   header_data        = g_header
*   FOLMEM_DATA        =
*   RECEIVE_DATA       =
* File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
    method             = method1
   office_user        = g_owner
   ref_document       = g_ref_document
   new_parent         = g_new_parent
importing
   authority          = g_authority
tables
   objcont            = g_objcnt
   objhead            = g_objhead
   objpara            = g_objpara
   objparb            = g_objparb
   recipients         = g_receipients
   attachments        = g_attachments
   references         = g_references
   files              = g_files
changing
    document           = g_document
   header_data        = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
    method             = method1
   office_user        = g_owner
   ref_document       = g_ref_document
   new_parent         = g_new_parent
importing
   authority          = g_authority
tables
   objcont            = g_objcnt
   objhead            = g_objhead
   objpara            = g_objpara
   objparb            = g_objparb
   recipients         = g_receipients
   attachments        = g_attachments
   references         = g_references
   files              = g_files
changing
    document           = g_document
   header_data        = g_header.
*-- End of Program
Hope this helps, Do reward.

Shell Script to send email with .txt file as attachment

Dear Al,
Could any one help me with code, for sending email with .txt file as attachment using shell script.
Thank You!

978334 wrote:
Dear Al,
Could any one help me with code, for sending email with .txt file as attachment using shell script.
Thank You!http://bit.ly/XHfSCz
https://forums.oracle.com/forums/search.jspa?threadID=&q=sendmail&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Sending email with attatchements

Similar Messages

Maybe you are looking for