Sending sysex commands from MainStage

Has anyone figured out a way to send sysex sequences from MainStage when changing patches? I need to use sysex to switch one of my keyboards between its "Program" and its "Combi" mode and I don't see anything obvious in MS 2 to do this.
I suppose it will be necessary to use an external utility like MidiPipe or Bidule or Max to listen for special MIDI commands from MainStage and then generate sysex messages but I thought I'd check first to see if anyone has an easier method.

AFAIK - there is no way to send sysex from MainStage 2. Maybe Applescript can do it? MainStage can execute Applescripts.

Similar Messages

How to send a command from a vc++.exe to LABVIEW.exe in order to control the button on the LABVIEW.exe

Hello, everyone. Using VC++, I have gotten the handle of a *.exe(built by Labview), but I cannot get the button handle. I want to get the button handle and post the message to control the button. How can I do that? When I use the SPY++, the *.exe(built by Labview) have not any child windows which is very different from the *.exe(built by VC++). In SPY++, what is the LVDChild class? How can I send the message to control the button on *.exe(built by Labview)???
That is to send a command from a vc++.exe to LABVIEW.exe in order to control the button on the LABVIEW.exe. How can I get it ?
Thank you!

hummingbird wrote:
Thank you! But I dont kown how to use vi server to raise a value signalling event. Can we put vi server into the vc program? Can you give me some more information or some examples, hehe!
hummingbird
Checkout the LabVIEW ActiveX server interface in the User Manual in Chapter 20, Windows Connectivity and the VI Server Reference in Chapter 17, Programmatically Controlling VIs.
There is a sample for Visual Basic under examples/comm/VBtoLV.frm, which should be quite simple to translate to Visual C as long as you can figure out the basics of ActiveX programming in VC (I have never done anything with ActiveX in VC). For those basics I would recommend some text book or MSDN.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Sending novell command from PHP

Hi,
I am trying to unzip a file from php.
I am trying to run a unzip command from phpm but the novell server won't take it.
when i do: <?php exec("unzip DATA1:/zipfile.zip"); ?>
i get: unable to find load file SYS:/TMP/UNZIP
when i do: <?php exec("echo unzip DATA1:/zipfile.zip"); ?>
i get: unable to find load file SYS:/TMP/ECHO
when i do: <?php exec("echo unzip "); ?>
i get: unzip.nlm load status KenelOnly
Does someone know how to send a command from php to Novell correctly??
Thank you,

Have you tried specifying the path with something like
<?php exec("sys:/system/unzip DATA1:/zipfile.zip"); ?>
Wolfgang
"Flex Travel - Higo Rocha Cidario" <[email protected]> wrote in message
news:oE0uh.7409$[email protected]..
> Hi,
>
> I am trying to unzip a file from php.
> I am trying to run a unzip command from phpm but the novell server won't
> take it.
>
> when i do: <?php exec("unzip DATA1:/zipfile.zip"); ?>
> i get: unable to find load file SYS:/TMP/UNZIP
>
> when i do: <?php exec("echo unzip DATA1:/zipfile.zip"); ?>
> i get: unable to find load file SYS:/TMP/ECHO
>
> when i do: <?php exec("echo unzip "); ?>
> i get: unzip.nlm load status KenelOnly
>
> Does someone know how to send a command from php to Novell correctly??
>
> Thank you,
>

My HP Color Laserjet CP1215 only prints when sending a command from a distant computer (shared pr.)

My HP Color Laserjet CP1215 won't print when I send a print command from the computer to which the printer is connected to. The printer is shared. When my colleague sends a print command from another computer, the printer does his job.

I am currently in the same boat. I love how you posted this legitimate issue 3 years ago and there is still no resolution. It really reflects on the company's character and attitude toward their customers.
Hopefully this will get a response.

Sending AT command from xbee pro to read the data from device

I am new to serial communications using Labview.
I am having trouble with starting up the project, where I have to design the software that involves XBee pro module.
I need to send the READ command to read the data from a device. Then the software should go to the AT command mode (we enter the AT command mode by entering +++)
Then I need to read the energy level of the device by entering the command: ATED. The software should continuously read the energy level every 30 seconds, which will be displayed on the front panel.
I am not sure where to start the software from. i.e. how to enter the Read command and then the AT command.
I am hoping someone can suggest how to start this.
Thanks in advance.

Hello Manny,
You could also review the discussion from the link below which may also guide you in a good direction with your project.
"Need example vi using AT commands for dialing the modem at the remote end"
http://forums.ni.com/t5/LabVIEW/Need-example-vi-using-AT-commands-for-dialing-the-modem-at-the/td-p/...
Best regards,
Daniel Cabezas
Applications Engineering
National Instruments
www.ni.com/support

Sending OS command from PL/SQL procedure

"How can I send a operating system comand from PL/SQL procedure?
I want to move , to copy , delete a file from a PL/sql procedure. i.e under unix send mv, cp or
rm command";
my e-mail is [email protected]

take a look at
http://asktom.oracle.com/pls/ask/f?p=4950:8:881946
regards
Freek D'Hooge
"How can I send a operating system comand from PL/SQL procedure?
I want to move , to copy , delete a file from a PL/sql procedure. i.e under unix send mv, cp or
rm command";
my e-mail is [email protected]

How can I send Scroling commands from action script?

I just set both horizontalScrollPolicy and verticalScrollPolicy off, and I wont that the picture will scroll down when the user move his mouse to the bottom of the screen, I created mouse event that shows me mouse coordination in a text bar all what I have left to do is to give the scrolling command, just can't find it, so I am asking your help, hope you will.

See the Capabilities class to examine the screen resolution:
The Capabilities class provides properties that describe the system and
player that are hosting a SWF file. For example, a mobile phone's screen might
be 100 square pixels, black and white, whereas a PC screen might be 1000 square
pixels, color. By using the Capabilities object to determine what type of device
a user has, you can provide appropriate content to as many users as possible.
When you know the device's capabilities, you can tell the server to send the
appropriate SWF files or tell the SWF file to alter its presentation.
For example, here is how you can check the user's screen resolution:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
creationComplete="init();">
<mx:Script>
    <![CDATA[
      private function init():void{
        trace("screenResolutionX: " + Capabilities.screenResolutionX);
        trace("screenResolutionY: " + Capabilities.screenResolutionY);
    ]]>
</mx:Script>
</mx:Application>

Unable to send midi from Mainstage out to Rewire applications

I can't seem to find out how to send midi out from Mainstage to other applications, such as Reason.
I created an external instrument channel strip, but in the midi out -box out the channel strip I can only see the physical midi output from my audio interface. The Rewire application should be visible here as an option, shouldn't it - or is there another way to send midi out from Mainstage to be able to play for example Reason instruments with Mainstage? Any ideas what might be wrong? I have Reason open and it seems to be working as a Rewire slave as it should, but somehow it isn't visible as a midi port in Mainstage.
- Malmberg
Message was edited by: Malmberg

Hey Malmberg, I was able to get this to work by doing the following steps:
Opened Mainstage and my Mainstage concert file first
Then opened Reason (I only have the demo)
Selected a patch I wanted to use in Mainstage to Reason
Clicked + to create a new Ext channel strip
In the MIDI Out box, I used the dropdown list and choose Reason (see image)
It could be that the sequence you used so open MS first, then Reason

Send XMPP commands - is this possible?

Is it possible to send XMPP commands from the Messages app? I'm thinking of commands such as /me, /nick etc. but also the application specific commands you can send to server applications (such as Jenkins).
It's possible from Pidgin (on Windows/Linux) and I'm pretty sure it's possible in Adium (just downloading that now) but, if possible, I would rather stick with just one chat program on my Mac.
I've tried issuing these commands, but they just end up being sent as literal messages, so all users simply see "/nick m0thr4" instead of "User John Smith is now known as m0thr4", as they would if I sent that command from a dedicated Jabber client.

Hi,
The Slashme (/me xxxxx) command has worked in iChat since about iChat 4.
EDIT.
The /me needs an action stated afterwards such as /me waves.
Sending from iChat 5 to Messages does show the /me waves as "Ralph Johns Waves"
Also sending from a Jabber acccount to an GoogleMail one (same sending app and same recieving app.) works
Typing just /me just sends that as text.
Messages will also send them as well as Receiving them.
I had not heard of the /nick one.
8:51 PM Wednesday; June 19, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

"An error occurred sending the command to the application" When trying to open excel document from outlook 2007

Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

When I open Firefox 4 RC1 by clicking an external link (as from my desktop) I get an error: "there was a problem sending the command to the program"

A box with this error: "there was a problem sending the command to the program" always pops up upon clicking any URL sitting in my desktop (or from any other folder). It will not happen if Firefox is already open. However, it is only an annoyance as the page fully opens with no problem.
It started after I downloaded Firefox 4 beta ver 12. It continued after upgraded with RC1. It did not happen in my latest version of Firefox 3.6.x which I removed after installing 4 RC1

This has happened to me many times but on the older FF 3 It could be a small bug, One should list the PC's being used as it could be related? Mine is an E-Machine Mod, W3609 running W7.

When going to a website from the desktop I get the followi ng message. "There was a problem sending the command to the program" Even though I get this messge, it still connects with the website/

When going from the desktop to a website, I get the following message. "There was a problem sending the command to the program" Even though I get this message, I still connect to the website.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

See:
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

How to get the time length from send record command to record video really?

I have two buttons. Record/Stop
I press Record button to record the video and press Stop
button to stop recording.Now,I spend 1986 ms from press Record
button to press Stop button.
But the flv file's length is 1920 or 1910 or 1915 ms.
So I want to get the time length from send record command to
record video really.
Can you give me some suggests.
Thanks!

maybe you have lag in publishing.... are you try watch de
NetStream.liveDelay() method?
or start counting when NetStream.onStatus has
"NetStream.Record.Start" and "NetStream.Record.Stop" in information
objects....

Sending sysex commands from MainStage

Similar Messages

Maybe you are looking for