Sensor hub firmware update won't install on Windows 8.1 x64 on Twist...

Hello...
I'm unable to install the "Sensor Hub Firmware Update for Windows 8.1 (32-bit, 64-bit), 8 (32-bit, 64-bit) - ThinkPad Twist S230u" package on my Twist S230u (3347) running Windows 8.1 x64.  When I run the package, I get a "Please install the .NET 4.5.50709 Framework, then restart this update application" error.
Unfortunately, I'm unable to install .NET 4.5 on Windows 8.x as it comes with the OS.  Windows 8.1 includes .NET 4.5.1.  I upgraded my Twist from Windows 8 to 8.1 via the Windows Store before this update came out.  So, as of right now, I can't install the firmware update that hopefully fixes the annoying ambient light sensor issue...  Any thoughts?  (I assume trying to shoehorn .NET 4.5.0.xxxx onto Win8.1 may be a bad idea...)

Hi,
I found a workaround for this.
You just have to change the .NET version in the registry. Once done, you will be able to update the firmware. Don't forget to backup your registry first and to undo changes once the update has been completed.
Run regedit.exe.
For 64-bit Windows users, go to the following key:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v4\Full
For 32-bit users, it should be here: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full
You'll need to change the permissions before you can edit anything.  First, change the owner to Administrators, then assign the Administrators principal with Full Control.
Finally, simply change the value for "Version" to "4.5.50709".
Info-Mania - Pierre Royer - Consultant and IT manager - All solutions are provided as is, without any warranty. Info-Mania is not responsible for any damages or losses. Be sure to take all necessary precautions before performing the proposed solutions.

Similar Messages

  • Firmware update won't install

    My Mac was not connected to a power source when a Thunderbolt update started.   Now installation appears to be stuck.  In the App Store under "Updates" the Thunderbolt Firmware Update 1.2 is listed as "installing" but the progress bar is all the way to the left and hasn't budged in an hour.
    To complicate matters, I just upgraded to Yosemite and am trying to install the iPhoto Library updater and I'm afraid I'll lose photos because that installation says "waiting for other installations to complete."  I did a back up of the hard drive before installing Yosemite so I'm hoping photos are safe. 
    I read that restarting the computer when firmware is being installed can render the computer unusable.  Is that also true of a firmware update?
    When you answer, if you do, please keep in mind that I am not a technical person.
    *Not sure if this is important or not but under "purchases" in App Store, OS X Yosemite is listed and there is "download" button.  I thought this was odd, because I have OS X Yosemite installed. 

    After you download the update it should run and bring up a dialog box asking you to close all programs and to shut down the machine. It sounds as though you are getting at least this far. After you shut down the machine are you then pressing and holding the power button until either the sleep light starts flashing, or the computer makes long tone sound? If you just restart the machine and do not hold the power button the firmware does not actually install, these steps are required to actualy install the update.
    Luck
    E

  • Mac Pro SMC Firmware Update Won't Install (Mac Pro 2007)

    This keeps popping up in Software Update, even though I've 'Installed' it.
    I restart, progress bar goes to 100%, fans spin up...reboot. However, evry time Software Update loads...there it is agian. I've checked the Firmware/Boot ROM number, and it's not what it should be (is still the previous rev.)
    I've done this 4 times now...
    Is it even worth bothering with?

    Did you actually run the update from your Utilities folder (where I believe it ends up)? You'll go through a process of rebooting and hearing the long tone / seeing grey screen and progress bar. Until it's actually run properly, you'll keep seeing reminders.
    Matt

  • Is there a reason iTunes 10.7 update won't install on Windows 7?

    It shows there's an update available, but when I click to install the update, it doesn't do anything, even after restarting the iTunes program and the PC itself. ?  Anyone else experiencing problems?

    It shows there's an update available, but when I click to install the update, it doesn't do anything
    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • Shockwave Flash update won't install on Windows 2000 SP4?

    Anybody else having this problem? It downloads fine enough, however will not install because of the following error: "The procedure entry point SetDllDirectoryW could not be located in the dynamic link library KERNEL32.dll."
    This is for Adobe Flash 11.2.202.235. The previous version (current) has apparently been discovered to be not so secure.

    Windows 2000 is no longer supported on current Flash 11 versions.
    *http://helpx.adobe.com/x-productkb/multi/release-notes-flash-player-11.html
    It looks that Flash Player 10.1.102.64 is the last version for Windows 2000
    *http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html

  • Windows updates won't install

    Hello,
    I have a remote user whose Windows updates won't install. He has a Dell laptop with Windows 7 Pro 32-bit. You can bring up the update windows and start the install but, at exactly 10 seconds, it just says "Updates failed" and doesn't really give
    any more information.
    I saw the Windows update service was stopped, I started it and that didn't seem to help. I also tried the update troubleshooter and that didn't do anything. I checked for malware and didn't find any, and he has plenty of disk space. I didn't see
    anything in Even Viewer or Reliability Monitor either.
    What could it be?
    Thanks. 
    Chris Hansen

    Hi Chris,
    Firstly, please check if those Windows Update have already installed:
    1. Open Windows Update by clicking the Start button. In the search box, type
    Update, and then, in the list of results, click Windows Update.
    2.In the left pane, click View update history.
    3. Click Installed Updates at the top of the page, there check if any Windows Update installed recently.
    If there is no any Windows Update installed, try to
    reset the Windows Update component to check if it could resolve the issue.
    Karen Hu
    TechNet Community Support

  • Windows Updates won't install - Error 0x80072EFD

    Question 
    Windows Updates won’t install.  I’m receiving Error 0x80072EFD.  What can I do to solve this?
    Answer 
    This particular error means that your computer was not able to connect to the Internet when it tried to install updates.  First, check your Internet connection and then try again. If that doesn’t work, try the methods below.
    Method A: Make sure that Windows Firewall is turned on, and temporarily disable third-party firewalls
    Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
    To complete this method, follow these steps.
    Step 1: Make sure that Windows Firewall is turned on
    To open Windows Firewall, click the Start button, and then click Control Panel. In the search box, type firewall, and then click Windows Firewall.
    Click Turn Windows Firewall on or off.
    Click On (recommended), and then click OK.
    Step 2: Temporarily disable third-party firewalls
    Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
    Click the arrow button next to Security to expand the section.
    Under Firewall, read the firewall status note. This information will indicate which, if any, firewall is installed and whether the firewall is turned on. For example, for ZoneAlarm, the notice will say ZoneAlarm Firewall is currently ON.
    Open the third-party firewall application that is listed in the firewall status note, and temporarily disable the firewall. If necessary, refer to the firewall application documentation, or contact the application vendor for more information about how to temporarily disable the application.
    Step 3: Try to install the updates again
    If this method resolved your issue, follow the steps in Method B, step 2 to re-enable your third-party firewall. You might want to also check for and install any necessary updates to your third-party firewall.
    If this method did not resolve your issue, continue with Method B.
    Method B: Temporarily disable third-party antivirus software
    Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
    Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
    Step 1: Locate and temporarily disable your third-party antivirus software
    Note Windows does not detect all antivirus software, and some antivirus software doesn't report its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you're not sure how to find it, try any of the following:
    Look for the antivirus software in the list of programs on the Start menu.
    Type the name of the software or the publisher in the Search box on the Start menu.
    Look for the software in Action Center:
    Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
    Click the arrow button next to Security to expand the section.
    If Windows can detect your antivirus software, it will be listed under Virus protection.
    If the software is turned on, check the Help documentation that was included with the software for information about how to disable it.
    Note You may have to look in the application documentation to determine how to do this.
    Step 2: Check for Windows Updates
    As soon as the antivirus software is temporarily disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
    If this method resolved your issue, and you were able to install the updates successfully, you should re-enable your third-party antivirus software.
    If this method did not resolve your issue, continue with Method C.
    Method C: Disable software accelerator programs
    Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.
    Note If your third-party firewall is still disabled from Method B, do not open e-mail messages, surf the Web, or use instant messenger at this point.
    Step 1: Disable software accelerator programs
    To do this, select from the following options:
    See the documentation that was included with the program.
    View the Help files for your program.
    Contact the program vendor. For information about how to contact the program vendor, visit the following Microsoft Web site:
    http://support.microsoft.com/gp/vendors
    Step 2: Install Updates
    As soon as the software accelerator program is disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
    If this method resolved your issue, you should enable the software accelerator programs that you disabled in Step 1.
    If this method did not resolve your issue, continue with Method E.
    Method D: Add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list
    Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
    To add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list, follow these steps:
    Start Windows Internet Explorer.
    On the Tools menu, click Internet Options.
    Note If you are using Internet Explorer 7, and the menu is not available, press the ALT key on your keyboard to access the Internet Explorer Menu.
    Click the Security tab, and then click Trusted Sites.
    Click Sites, and then click to clear the Require server verification (https for all sites in this zone check box.
    In the Add this Web site to the zone box, type the following addresses, and then click Add after you type each address:
    http://update.microsoft.com
    http://windowsupdate.microsoft.com
    Click OK two times.
    Try to install the updates again.
    If this method resolved your issue and you were able to install updates successfully, you should re-enable your third-party firewall if it is still disabled. To do this, see step 2 in Method A.
    For more methods and advanced troubleshooting techniques, see You may encounter temporary connection-related errors when you use Windows Update or Microsoft Update to install updates.

    Mark, I've just been through this update issue with two installations.  In my case, it seemed intertwined with authentification and indexing not working, either.    Upon a transfer of my system disk to new hardware I got hit with the issue and couldn't fix it.  Which is why I did a clean install of Win7 ultimate 64bit on my T61p.  The install (including update) worked great until I ran the intel matrix storage manager update.  This broke windows update.  If you surf the web, and include "intel rapid storage manager" or "intel matrix storage manager" and "Windows update fails", you'll see that a lot of folks feel that the intel driver (or how windows handles it) is what breaks update.  I tracked this down to a driver, iastor.sys, in windows\system32\drivers.    I was able to fix my Window Update by copying an iastor.sys from another recently built machine (should be exactly the same, but this was my wife's T510, but still Win 7 Pro 64) to overwrite the iastor.sys that the intel update changed.  To be clear: I couldn't get windows update or indexing to work.  I overwrote* the "bad" iastor.sys with one that worked on another computer.  Rebooted.  Update worked. I just wanted to point out that instead of blindly installing updates to fix problems, folks should be aware that sometimes the update is the problem. Especially as these systems are off warranty and the drivers are not being updated.  I've asked elsewhere, so let me ask here: Where is the System Interface Driver for t61p?  Not listed anywhere on site, links on the web referring to it are all broken.  Is the System Interface Driver now part of another driver program?  Thanks! Jim T61p, Win 7 Ultimate 64bit, and T510, Win 7 Pro 64bit

  • 10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart

    10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help

    Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update

  • 10.4 update won't install

    latest iTunes update won't install correctly. Says to shut down iTunes for update to complete. I've made sure 3 times that iTunes was not opened.

    I'm having the same problem with Windows 7 and cannot download direct from the website. 

  • Updates won't install,billing info wrong

    Updates won't install,keeps saying problem with billing info,then there was a problem with a previous payment,but I can't find out what is was.

    You'll have to update your billing info from itunes, here's a guide on how to do it on iOS http://support.apple.com/kb/ht1918?viewlocale=nl_nl .  It may be that there weren't suffecent funds at the time of the last purchase, in which case you'll just have to varify the three digit security code. Hope it helps!

  • Illustrator update won't install, even after uninstalling and retrying multiple times.

    Illustrator update won't install, even after uninstalling (using the "Uninstall Adobe Illustrator CS6" app and retrying (using Adobe Application Manager}multiple times. Now I can't open AI CS6 at all.
    The error message I get in Application Manager is:
    "Application could not be found. Restore in case it was trashed/moved to a different volume. Reinstall the application otherwise (U44M1P2B)"
    Help!

    Can you please try installing the Adobe Application Manager from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.
    If that doesn't work then the safest course would be to remove all Adobe Creative Software using the uninstallers located in Applications/Utilities/Adobe Installers.  This should then remove the Adobe Application Manager folder also inside Utilities.  Once the software is completely uninstalled and the Adobe Application Manager is removed then you should be able to reinstall from https://creative.adobe.com/.

  • New update won't install on my Dell Laptop Windows 7.  Even tried from the iTunes website.  Now all of my access is gone.  What must I do?

    New update won't install on my Dell Laptop Windows 7.  Even tried from the iTunes website.  Now all of my access is gone.  What must I do?

    Hello SandyJeanne,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • Jam Pack 4 update won't install

    I've resinstalled *Jam Pack 4* 1.0 and went to Apple's site and downloaded the 1.0.1 update to correct some sound quality issues. However, the update won't install. I keep getting the message, "There is nothing to install," when I get to that step in the installation process. I see in an archived area others have had this problem as well with this Jam Pack 4 update. Why won't the update install?
    Any help out there for this?

    try repairing permissions:
    http://www.bulletsandbones.com/GB/Tutorials.html#repairingpermissions

  • IPhoto 9.1 update won't install

    I just bought a new MacBook Pro.  It came with iPhoto 11.  The iPhoto 9.1 update won't install.  It keeps saying that I need iPhoto 9.0 or greater, but I have iPhoto 11.  I have not moved iPhoto from its default location.  My computer is only 2 days old.  I've seen others with this problem, but no real solution.  Anyone have any suggestions?

    Thanks for your response TD, but this App, iPhoto 11 came already installed on my computer.  I registered my computer, but you can't register a product without a serial number.  I don't have the iPhoto 11 serial number because it came installed on my computer already.  I tried re-installing iPhoto 9.1 after registering my computer and got the same error message.  However, I did find out that I hae 90 days of complimentary phone support.  So I will be giving Apple a call.

  • Firmware update won't work after you've tried the Narf/Blanka method?

    Many ppl have reported that their Firmware update won't work after they've tried the Narf/Blanka method for Dualbooting Windows. [For some reason, it doesn't).
    Formatting the startup, reinstall etc WILL work ... because of what our friend says here : http://discussions.apple.com/message.jspa?messageID=2076211#2076211
    Fortunately, it isn't necessary To Reformat etc... (at least for the firmware update) Apparently, as long you boot from a different Disk to the one you've 'messed with' - such as , say, an external FW Drive, the Firmware updater works.
    Had the same problems, same reasons on a 20". Booting from external FW Drive made it happen for me.
    May someone be helped by this e-missive....

    Sorry: the above is (partly) wrong ... - it'll get you past the firmware update but won't get you past the Boot Camp Assistant ... - it wants to see a single partition No matter what ...
    [Just for that, I'm gonna see if I can mess with the 'can't do this on an external drive' requirement ... by moving an external to internal then back out again grin)
    best of luck...

Maybe you are looking for