Separate genres to act independent of each other

i would like to enter multiple genres for a particular album/song so that it appears in multiple genres listed in the browser.
example:
right now, if i edit the genre information of the radiohead song "idioteque" to read "rock, progressive, electronic", it would create a new genre called "rock, progressive, electronic".
what i would like it to do is include that particular song in separate "rock", "progressive" and "electronic" genre categories. then, when i click on any of those three categories, that song would be included.
i realize that this can be done with smart playlists, as i am currently utilizing that method, but i think it would be much easier if this information was included in the browser.
as an alternative, would it be possible to have a custom browser column that i could congregate with playlists of my choosing?

Hi Karthik
Default behavior of Adapter engine is EOIO. You will see the messages in queue in RWB. When you remove the configuration for "Maintain order at runtime" from interface determination then PI will process the messages independently. But in RWB as its having EOIO you will see the messages under a queue. But expected is PI should process as EO.
http://help.sap.com/saphelp_nw70/helpdata/EN/42/ea20e737f33ee9e10000000a1553f7/content.htm
Thanks
Gaurav

Similar Messages

  • Layers independent of each others

    Hello
    I got some troubles with layers, here is my problem. I’d like to create a document which will have the option to be in French or English, so to do that I have two layers (two different buttons control  layer visibility). In the same time I have for example three different arrows which are controlled by three different buttons. If it’s on two pages it’s easy, layer visibility + merge document, but on the same page I’m not able to do it with the layer visibility because layers are visible or not but do not have the option to be unchanged (or previous state).
    How can I separate layer_arrow and layer_language ?
    Thanks

    hai paskal,
    multiple applets in an html are independent of each other?Yeah they are independent .. But if you want them to communicate between themselves you can make them do so ...
    is there any perfomance issue in - "1 applet in 1 html" and "multiple applets in 1 html". As far as i know .. No .. the performance depends on the number of components it has to load at the run time.
    Peter

  • Same applets running on 2 different browser independent of  each other

    Hi all,
    I am calling the same applet two times in a browser. So i declared all the variables to be shared by the 2 applets as "private static".
    Now i want the applets in 1 browser to be independent of the applets in another browser when multiple browsers are invoked.(remember that each browser has 2 applets each).
    In other words,same applets invoked in MULTIPLE BROWSERS should be independent of each other. How to go about doing that?
    Is it possible to somehow invoke separate jvms for 2 separate browsers on the same machine when clicked on the same link twice?
    Thanks in advance.

    Hi all,
    I am calling the same applet two times in a browser.
    . So i declared all the variables to be shared by the
    2 applets as "private static".
    Now i want the applets in 1 browser to be
    be independent of the applets in another browser when
    multiple browsers are invoked.(remember that each
    browser has 2 applets each).
    In other words,same applets
    r words,same applets invoked in MULTIPLE BROWSERS
    should be independent of each other. How to go about
    doing that?
    Is it possible to somehow invoke separate jvms for 2
    separate browsers on the same machine when clicked on
    the same link twice?To start a new JVM try System.exec("java someclass");
    Thanks in advance.(T)

  • Syncing contacts between 2 different computers while keeping both independent of each other?

    Hi,
    I'm wondering if there is a way to have my calendars and contacts from 2 different computers running Mountain Lion sync to my iPad retina while keeping the 2 computers from merging the calendars and contacts? I do have a separate apple ID set up on each computer, and each computer does connect to iCloud.
    The reason is one is my work machine, the other my personal home machine. The home machine keeps my wife and me connected by sharing the contacts and calendars which has been working well. I don't want to clutter up that by mixing in calendars and contacts from my work computer and don't want my wife to have access to them either.
    The only way I can figure to have both reside on my iPad while keeping them independant of each other is to physically connect my iPad to my work machine and not have the contacts in iCloud. That way when I transfer them to the iPad via iTunes, it will be under the category On My Mac rather than iCloud contacts.
    The only problem with that is then I'm always having to connect and sync my iPad to my work machine.
    Is there a better way to do this?

    dcharlot wrote:
    I really just have no idea what machine name/ip address i am supposed to put in. when i put an asterik for any it just goes to localhost so that doesn't help me.
    Sorry, you lost me right there. Where exactly did you try to put an asterix????
    Which example program are you trying to use?
    Typically, you would enter the IP address of the server in the client program.
    LabVIEW Champion . Do more with less code and in less time .

  • How can I select and enlarge the entire doc,ge on a page, reducing the surrounding boarder.  I can move the difference text boxes about independently of each other but the outer most boarders of the main template block appear to be fixed.

    How can I select adn enlarge the entire document/image on a page, reducing the the surrounding boarder?  I can move the different text and image boxes around independently of each other but the outer most boarders of the main template block appear to be fixed.  I thought I would be able to enlarge or reduce my document from 'page layout' but this does not seem possible.

    Inspector > Document > Document Margins
    The word is border. Boarders are the Harry Potters of this world.
    Peter

  • Keeping messages to different receivers independent of each other

    Hi
       We have a scenario in XI where a message from R3 in EOIO QOS hits XI and then the message has 3 receivers depending upon the content of the payload. Each receiver is a different application that is waiting to receive messages from R3. There is no BPM involved in this scenario.
    What we find is all these three messages are put in the same queue on the receiving side as I see in RWB . So - if one of the receiving systems had an issue ( either in mapping or application error while XI tries to communicate with that end system ) , the other two messages are in queue - and in HOLDING status.
    Our objective is to make these messages to different receiver systems independent of each other with this QOS - EOIO . Am i missing something here ? Is the queue name at the receiving end - not supposed to contain the receiving system name also as a part of it - so that the three queue names are unique and independent of each other ?

    Hi Karthik
    Default behavior of Adapter engine is EOIO. You will see the messages in queue in RWB. When you remove the configuration for "Maintain order at runtime" from interface determination then PI will process the messages independently. But in RWB as its having EOIO you will see the messages under a queue. But expected is PI should process as EO.
    http://help.sap.com/saphelp_nw70/helpdata/EN/42/ea20e737f33ee9e10000000a1553f7/content.htm
    Thanks
    Gaurav

  • Can the 12 Ports of the PCI 6508 set independent from each other to I and O?

    Hello,
    can the 12 Ports of the PCI 6508 set independent from each other to I and O?
    Or are they configured in groups like A, B and C ports?
    Thanks,
    BFutzi

    Hello,
    I am upgrading from Traditional DAQ to DAQmx on an old installation with a PXI-6508 board.
    I struggle with this reset problem.
    I read the post from NI "Archived: PCI DIO-96/PXI 6508/PCI 6503 Digital Ports cannot be Controlled Independently".
    This post states:
    "NI-DAQmx is expected to work around this issue by resetting the other ports of the 8255 to the last known state.This means that the other ports may momentarily be reset, but will return to their previously set values."
    Does anyone can confirm that this is true?
    I notice that e.a. port 11 is reset when I write to port 10, but the values of port 11 are not set to the last value I had written to it.
    Herwig.
     

  • How do I get FF and IE to run completely independent of each other when browsing?

    I want to use IE 8 and Firefox 3 (3.6 presently loaded) concurrently, yet independently, for website testing. I was previously able to do this without issue on my old computer, but after recently changing laptops, I find both IE and FF now share cookies as if one browser. I want them to operate as two separate browsers, not sharing cookies or preferences in any way.
    For example, when I open a test site on FF, logging in with ''username A'', then open IE to same site - IE shows I am already logged in as ''usename A'', even though IE was a fresh start and page load; similarly, when I change users on the site via IE and log in as ''username B'', (not changing a thing on or via FF,) my FF screen updates (the site is designed to auto-refresh periodically) showing me as ''username B'' on both browsers. Never had this problem before changing machines, so I'm guessing it is settings need tweaking, but have no idea where to find the right one(s) to make my new machine work like my old machine, resolving my browser independence problem. Can anyone offer help?

    Hey theoqaat,
    Thanks for the question. After reviewing your post, it sounds like the headers and footers are not printing. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Numbers for Mac: Using headers and footers for printing
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • How do I run two while loops independent of each other?

    I have a simple VI. I have loop 1 with and LED and a stop button and I have loop 2 with an LED and stop button.  They are both in while loops.  When I run the VI,if I stop loop 1, I can not turn it back on.  If I stop loop 2, it will not stop.  I've attached a file with my VI.  
    Attachments:
    2 Loops.vi ‏9 KB

    bebesbabe,
    This looks like a learning exercise, so I will not present a complete solution.
    1. It is not polite to post to the Forum a VI which will not stop except by pressing the Abort button.  The Abort button should only be used to stop a VI if something is wrong with the program during development. Add a stop button to the outer loop.
    2. A loop with no delay will try to run as fast as possible, consuming all the CPU resources it can get. Since these loops are for user interfaces, delays of 100 to 200 ms are appropriate. Use the Wait (ms) function.
    3. Your main problem is understanding dataflow. In LabVIEW any node may execute only when all of its inputs have been given data and it will not complete its execution until all nodes inside it have completed.  Your VI does not have external inputs so waiting for data is not a factor. Each loop is considered a node. So the outer loop will iterate only after BOTH of the inner loops have stopped.  On the next iteration both inner loops will be started again.  Of course if the stop buttons are still pressed, the will stop after one iteration, which will seem almost instantaneous. But because of dataflow as I have described, your program cannot really work the way you want. You cannot restart one loop until both have stopped. Put an indicator on the "i" terminal of the outer loop.
    4. You may wish to consider changing the mechanical action on your stop buttons to Latch when Released.  Read the help to learn about mechanical actions.
    The way the instructions on the front panel read, it is not clear what the intended solution is. What control or user action or program action is required to turn the loops back on? Changing the stop button?  Automatically after a delay? A separate On switch?  How is the entire program supposed to stop?
    Lynn

  • I have 2 iPads with the same log in and password details. How do I make them independent of each other so that contacts and calendar entries are not duplicated

    I have 2 iPads. When gifting one to my wife I did not change the log in and security details. Consequently any contacts and calendar entries are duplicated. How do I make the iPads independent so that the foregoing duplications are eliminated?
    Thank you

    The logins on the iPads, for example the iTunes store can be the same if you share an iTunes account, this will not effect the Contacts/Calendars unless you are using iCloud to sync Calendar/Contacts in which case just setup a new iCloud account for your Wife and change the iCloud settings on her iPad to this new account.
    Unfortunately the contacts if syncing with your computer will be the same as it can only sync from the given contacts on your computer.
    You can use a different login to the computer for your wife and she can then have her own contacts.
    If your Contacts application on your compuer has Categories/Grouping you can tell iTunes to sync certain Categories/Groups to each iPad, that way splitting up the contacts on your computer for each iPad.
    The same is true for the Calendar if you only have the one calendar it will sync it for both of you, the iPad settings in iTunes has the option to pick a Calendar if you have more then one.
    One option is to use an online calendar such as Google Calendar and sync to and from it with your iPad that way the Calendars would be individual.

  • Can the Boot Camp Drivers be installed independently of each other?

    I am having major issues with Boot Camp 3.1. It seems to put the windows 7 side of my mac to sleep immediately upon boot up. I have isolated the problem to Boot Camp and I was wondering if I could remove individual drivers to isolate which driver is causing the problem.
    thanks,
    C

    Hi,
    the Driver Setup program cannot do this so you would have to do this yourself "by hand".
    For that copy the full content (files and folders) of the BootCamp Driver package from your OSX Install DVD to a folder on your Windows partition.
    I prefer something like "c:\download" for this.
    After that go through the appropriate Folders for the hardware components in your Mac and install each driver by hand.
    Have you already tried the Safe-Boot options of WIndows 7 as described here http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-s afe-mode especially the Safe Mode and the Enable Boot Logging to determine if it is indeed a Driver problem or maybe some kind of startup item ?
    Regards
    Stefan

  • Can the 12 Ports of the PCI 6508 set independen​t from each other to I and O?

    Hello,
    can the 12 Ports of the PCI 6508 set independent from each other to I and O?
    Or are they configured in groups like A, B and C ports?
    Thanks,
    BFutzi

    The attached example demonstrates how to write a digital pattern to multiple ports with a single write call, overcoming the 32-line limitation of the DIO Port Write VI.
    Attachments:
    Write_to_Multiple_Ports_(6507-6508).vi ‏49 KB

  • 2 New Ipads (Retina and Mini)(New to Apple) How do I share purchased apps, but others have each act independently? Mini is for the Wife the Ipad4? is for me. I want to use mine at work, etc. She's home with the kids. Can we set them up seperate, but share

    2 New Ipads (Retina and Mini)(New to Apple) How do I share purchased apps, but others have each act independently? Mini is for the Wife the Ipad4? is for me. I want to use mine at work, etc. She's home with the kids. Can we set them up seperate, but share
    --break--
    So we are entirely new to Apple products. I'm an IT guy, but have always been a windows user.
    So the Ipad with Retina Display is to be mine (and will use it at work for notes, organization, etc)
    The MINI is for the wife.
    But, are we allowed and can we.. buy an app and share that app between both devices? IE. Can I buy a copy of Angry Birds for the House and both Ipad's use that single purchase? and if so, can we still run the Ipads seperate other than to share the apps purchased. IE my facebook and email set up on mine and hers on her ipad mini?
    When I finally find a note taking app I like, can I share it on her ipad, without her having all my work files, etc?
    Thanks for helping out the apple noob. Hoping for a great experience, and anticipate droping $100 in apps the first day.. just don't want to do that twice. If this is against the usage policy, thats unfortunate but good to know. (I mean we can share stuff on PC as long as its in the same household)
    thanks again (explanations or links are fine)

    There are a number of Apple services: iMessage, FaceTime, iCloud, Game center, Find My iPad, etc.
    Now, to share apps, music and books you need to have the same Apple ID:
    iPad's Settings > iTunes & App Stores > Apple ID > Your purchasing Apple ID.
    For the other service, your wife should have her own Apple ID.
    All she needs is a valid e-mail address, apply Apple ID below:
    https://appleid.apple.com
    Here's a limk with useful tips: Note: It's also valid in IOS 6
    iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

  • Can my family use 'find my iphone' for each other if we each have separate apple ids? recently had to create separate ones b/c we were getting each others texts/facetimes and i read this happens when you share an apple id.

    Can my family still use the 'find my iphone' app from our iphones / ipod touch to locate each others phone if we have separate apple ids?  We were sharing a single apple id but recently we started getting each others texts/facetimes .. I read that this happens when you share an apple id.  Will we just have to sign in with the others' apple id to locate their phone ?

    Use Find My Friends app instead.   Much easier to manage, and you won't need each other's id/pw's to do it.   They only need to accept your invitations and vice versa.

  • 4 people in our family have an iphones or ipod on the same apple id ..so that we can all share the itunes library. however  this means that we all get each others imessages. is there a way of sharing  itunes library with 4 separate ids?

    4  of us in the family with iphonesor ipods share the same apple id so that we can share the itunes library . However , this means we all receive each others imessages, unless we disable imessaging. Is there a way of sharing itunes library (ie.g with 4 separate ids) that avoids the sharing of imessages? .

    Thanks, Terence, but if she was inclined to upload things, I wouldn't need access!
    Here is an example: we go on vacation, she takes 250 photos, edits twenty of the best shots, and uploads three to facebook.  I want to make an album including some of the edited shots and some of the less perfect but still fun shots - so I need all 250 photos - uploading that many photos to a photosharing site takes forever even if she did it - but she won't.  I used to just hijack her computer for a day, but I'd like to be able to hijack her iphoto library without stealing her computer...if possible!
    Thanks for any help you can offer!
    - A

Maybe you are looking for