Serial no in LIS

Hi,
In our system the serial number of a product is located in Sales order / Extras / Technical objects. Is there any possible way to bring this information in LIS reports as a characteristic?
We are using 4.6C by the way.
Thanks for your help...

Yes you can create new tables in:
SPRO: logistic general -> Logistic information system -> logistic datawarehouse -> data basis -> information structures -> maintain self defined info struct.
furthermore you could work based on schedule lines level (MCVBEP) or create a custom formule in the update rule so that you can manage to create more than one record (one for each serial number) in your information structure.
You need the help of an ABAP developer for sure.
regards
Roberto

Similar Messages

  • Projeto - Reconhecimento de Voz e Comunicação Serial

    Olá, estou desenvolvendo um projeto no qual devo reconhecer comandos de voz e enviar posteriormente informações através de comunicação serial.
    A idéia do projeto é a seguinte :
    - Reconhecer comandos de voz como "POSIÇÃO 1, POSIÇÃO 2"
    - Para cada comando reconhecido, uma mensagem deve ser enviada via comunicação serial.
    No entanto, não venho conseguindo reconhecer comandos de voz através de alguns VI's fornecidos pela NI, então venho pedir ajuda para procurar um caminho para começar a construir tal projeto.
    Grato desde já.
    Gilberto Neto
    Estudante de Tecnologia em Mecatrônica Industrial
    Faculdade de Tecnologia Termomecanica

    Olá, achei bem interessante este projeto, porém tenho algumas perguntas:
    Existe alguma especificação quanto ao Hardware para capturar o sinal?
    Quando você diz: "Reconhecer comandos de voz como "POSIÇÃO 1, POSIÇÃO 2", você está se referindo que o conteúdo da mensagem falada é "POSIÇÃO 1,POSIÇÃO 2" ou que isso é uma mera identificação para uma mensagem diferente?
    Capturar o sinal emitido pela voz é relativamente fácil,porém a identificação e interpretação desse sinal que é algo mais complexo (Relativo a segunda pergunta que eu fiz). Com as VI's da paleta (Sound), você irá apenas coletar esse sinal, porém a análise heurística para interpretação fica a cabo do desenvolvedor. Felizmente, existem algumas Library como o SAPI e outras para abreviar este processo.
    Sobre a serialização deste sinal, você será basicamente "obrigado" a trabalhar com filas de tamanho fixo , pois os dados devem ser armazenados em sequência e serem despachados em blocos ANTES de serem repassados as funções VISA. Uma dica é repassar essa informação utilizando dados do tipo Digital (0,1) em vetores bidimensionais para assegurar que a mensagem seja serializada completamente (sem perder nenhum bit pelo caminho)
    Você irá precisar de 3 Loops: Um para a captura dos dados, um para interpretação e arranjo e outro para envio das informações. Pesquise sobre a arquitetura QMH ou P/C. Não é necessário usar nada mais complexo neste quesito
    Espero que eu tenha ajudado
    "In theory, theory and practice are the same. In practice, they’re not."

  • LIS and Generic Extraction

    Hi All,
             Could someone please send me some information regarding LIS extraction and Generic extraction.
    Thanks in advance,
    Sekhar

    Hi Sekhar,
    Please do check the link for step by step for generic xtraction
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    check the following
    http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
    business content
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
    https://websmp203.sap-ag.de/co
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
    (navigate with expand left nodes)
    also co-pa
    http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
    LO Extraction
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Check these links:
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    Re: LO-Cockpit  V1 and V2 update
    Also Refer this link:
    http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
    FI-CO 'Data Extraction -Line Item Level-FI-CO
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
    FI-GL
    http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
    http://www.sapgenie.com/sapfunc/fi.htm
    FI-SL
    http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
    How to do basic LO extraction for SAP-R3-BW
    1. Go to transaction code RSA3 and see if any data is available related to your DataSource. If data is there in RSA3 then go to transaction code LBWG (Delete Setup data) and delete the data by entering the application name.
    2. Go to transaction SBIW --> Settings for Application Specific Datasource --> Logistics --> Managing extract structures --> Initialization --> Filling the Setup table --> Application specific setup of statistical data --> perform setup (relevant application)
    3. In OLI*** (for example OLI7BW for Statistical setup for old documents : Orders) give the name of the run and execute. Now all the available records from R/3 will be loaded to setup tables.
    4. Go to transaction RSA3 and check the data.
    5. Go to transaction LBWE and make sure the update mode for the corresponding DataSource is serialized V3 update.
    6. Go to BW system and create infopackage and under the update tab select the initialize delta process. And schedule the package. Now all the data available in the setup tables are now loaded into the data target.
    7.Now for the delta records go to LBWE in R/3 and change the update mode for the corresponding DataSource to Direct/Queue delta. By doing this record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7 there you can see green light # Once the new records are added immediately you can see the record in RSA7.
    8.Go to BW system and create a new infopackage for delta loads. Double click on new infopackage. Under update tab you can see the delta update radio button.
    9.Now you can go to your data target and see the delta record.
    find your scenario and find what data sources do you need on R3 side and ensure they are active as well:
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
    find your scenario -> data sources -> go to R3 -> sbiw and activate required data source
    replicate data sources in BW:
    RSA1 -> source systems -> right click on your source system -> replicate
    then activate your BC:
    service.sap.com/bi -> BI Business Content -> General Information -> SAP BW Business Content - Activation
    and execute infopackage (it should be delivered with BC)
    Useful links:
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    service.sap.com/bi -> BI InfoIndex
    sdn.sap.com -> Business Information Warehouse -> How-To guides (under Quick Links)
    Hope This Helps.
    ****Assign Points If Helpful****
    Regards,
    Ravikanth

  • Un serialized V3 ....

    Hi all,
    I understand the V3 job as follows:
    when user enters the tranxn, it will be written to application tables in V1 and written to update tables in V2, when ever we schedule a V3 job, it transfers data from update tables to delta queue.
    based on above, Unserialized V3 is dependent of V2 job?
    Update tables are updated in V2 job?
    Am I correct..

    Update methods: Un-serialized V3
    • Extraction data for written as before into the update tables with a V3 update module
    • V3 collective run transfers the data to BW Delta queue
    • In contrast to serialized V3, the data in the updating collective run is without regard to sequence from the update tables
    Transaction postings lead to:
    1. Records in transaction tables and in update tables
    2. A periodically scheduled job transfers these postings into the BW delta queue
    3.This BW Delta queue is read when a delta load is executed.
    Issues:
    • Only suitable for data target design for which correct sequence of changes is not important e.g. Material Movements
    • V2 update has to be successful
    Direct Delta: With this update mode, the extraction data is transferred with each document posting directly into the BW delta queue. In doing so, each document posting with delta extraction is posted for exactly one LUW in the respective BW delta queues.
    Queued Delta: With this update mode, the extraction data is collected for the affected application instead of being collected in an extraction queue, and can be transferred as usual with the V3 update by means of an updating collective run into the BW delta queue. In doing so, up to 10000 delta extractions of documents for an LUW are compressed for each DataSource into the BW delta queue, depending on the application.
    Non-serialized V3 Update:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
    V1 - Synchronous update
    V2 - Asynchronous update
    V3 - Batch asynchronous update
    These are different work processes on the application server that takes the update LUW (which may have various DB manipulation SQLs) from the running program and execute it. These are separated to optimize transaction processing capabilities.
    Taking an example -
    If you create/change a purchase order (me21n/me22n), when you press 'SAVE' and see a success message (PO.... changed..), the update to underlying tables EKKO/EKPO has happened (before you saw the message). This update was executed in the V1 work process.
    There are some statistics collecting tables in the system which can capture data for reporting. For example, LIS table S012 stores purchasing data (it is the same data as EKKO/EKPO stored redundantly, but in a different structure to optimize reporting). Now, these tables are updated with the txn you just posted, in a V2 process. Depending on system load, this may happen a few seconds later (after you saw the success message). You can see V1/V2/V3 queues in SM12 or SM13.
    V3 is specifically for BW extraction. The update LUW for these is sent to V3 but is not executed immediately. You have to schedule a job (eg in LBWE definitions) to process these. This is again to optimize performance.
    V2 and V3 are separated from V1 as these are not as realtime critical (updating statistical data). If all these updates were put together in one LUW, system performance (concurrency, locking etc) would be impacted.
    Hope it will helps you.......

  • Deploying only Acrobat XI Pro CC package w/ Enterprise Serial # - Still getting "Sign In Required"

    Downloaded Creative Cloud Packager to create a serialized package of only Acrobat XI Pro.  I further customize the deployment via Adobe Customization Wizard XI, but did not re-enter the serial number (as suggested).  I am able to deploy from the Exceptions folder with the following cmd, msiexec /i "%inst%AcroPro.msi" PATCH="%inst%Updates\AcrobatUpd11006.msp" TRANSFORMS="%inst%Transforms\en_US.mst" /qn.  Upon launching Acrobat, I receive the a pop-up message, "Sign In Required.  Siging in with an Adobe ID and registering Creative Cloud Membership Enterprise is required within 32767 days otherwise it will stop working."  I don't understand why the serial number and Adobe ID I enterred when packaging did not carry over.  Any insight would be appreciated.

    Downloaded Creative Cloud Packager to create a serialized package of only Acrobat XI Pro.  I further customize the deployment via Adobe Customization Wizard XI, but did not re-enter the serial number (as suggested).  I am able to deploy from the Exceptions folder with the following cmd, msiexec /i "%inst%AcroPro.msi" PATCH="%inst%Updates\AcrobatUpd11006.msp" TRANSFORMS="%inst%Transforms\en_US.mst" /qn.  Upon launching Acrobat, I receive the a pop-up message, "Sign In Required.  Siging in with an Adobe ID and registering Creative Cloud Membership Enterprise is required within 32767 days otherwise it will stop working."  I don't understand why the serial number and Adobe ID I enterred when packaging did not carry over.  Any insight would be appreciated.

  • Using a serial Wacom tablet on a Mac Pro

    I have a good Wacom tablet with serial port interface that I would like to connect to a Mac Pro.
    Is there some way to do this? Is there any sort of serial to usb adapter or would that not work with a Mac Pro?
    Thanks for any advice.

    I don't think so. See these knowledge base articles from Wacom:
    http://www.wacom.com/faqs/knowledge_search.cfm?id=67
    http://www.wacom.com/faqs/knowledge_search.cfm?id=185

  • HT1349 How do you get help from apple if you don't know where to find the serial number of my "product."  I don't know if they mean my itunes program, my iphone, my computer, which one, the number on the computer (is there one), or something in Windows or

    How are you supposed to get help from Apple if you don't know what your serial number is?  They say to input the serial number of the "product" that you are asking about.  Since my problem is how to deauthorize/authorize computers, and they are saying I have more than 5 (which I have never owned more than 5 computers in my life), I can't imagine what serial number they mean.  Does it mean your desktop computer?  If so, which one?  Do they mean your device?  LIke your iPhone, iPod or whatever?  Do they mean the software ON one of your computers and/or devices?  If so, which program, and on which computer/device?
    We have three operational computers, one does not have iTunes on it.  Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers.  See what I mean?  I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not.  I only know of 2 computers that have iTunes on them, so how can there be 5?  We also have 2 iPhones and 2 iPods in this family, but one of the iPhones has his own apple id.  He may have been using mine, since his computer died.  I read that those don't count as "computers" to the 5.  Do they, then?
    Help!  I can't contact apple because I have no idea what they mean about serial number.  I doubt they would help me anyway.  In order to get the serial number off my desktop computer (that has iTunes on it already), I will have to move furniture, so I don't want to if that's not it.  Is there some way to find the serial number in the software, either on my desktop or my iPhone?

    sunshinecowgill wrote:
    We have three operational computers, one does not have iTunes on it.  Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers.  See what I mean?  I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not. 
    You could have more 5 computers authorized if you ever, for example, reformatted a hard drive or replaced a hard drive without deauthorizing the computer first. Apple's system would see that as a different computer, even though you don't. There's nothing to be afraid of in deauthorizing everything and the reauthorizing what you actually have. You won't lose any data. Mistimp is correct, they can't tell you which computers are authorized.

  • How Many Times Can I Use The Same Serial Number For Adobe Creative Suite 4?

    I have design standard and was told I can use the same serial number on multiple computers. How many time can I use it? And say I install it on the maximum number of computers, but get a new computer, can I uninstall it on one of the old computers and use it on the new one? And can I use the programs on both computers simultaneously or do I have to use them one at a time?

    Fred Tech wrote:
    Broadly speaking, it depends on the type of license you have.
    Specifically, if you have a single license then officially, you should only install it once on one computer.
    Practically, (unless it has changed with CS4) you maybe able to install it on more then one computer, BUT can only run one instance of the software at a time. You can not run more then one instance of the software concurrently; i.e. you can't run Dreamweaver on Computer 1 and Photoshop on Computer 2. That would be two instances, and is not permitted.
    This is my understanding. I am happy to be corrected if I am wrong
    Fred
    Sorry Fred you are wrong.
    If you have a single license you can install it on as many computers as you like. you can only activate the suite on two computers at anyone time. Work and Home or as many of us do it Desktop and Laptop. You can not use the computers simultaneously. You only have 20 activation/deactivations so use them wisely. Student versions only have one activation. You can not break up the suite installs the suite is considered one application.

  • How do I transfer an Acrobat serial number from one adobe account to another?

    I've installed Adobe DC Pro on one of our user's computers. When it asked for an Adobe ID I entered the ID I used to purchase the serial number. Unfortunately now acrobat always starts on the new computer and displays my name instead of the end user name. So I'm wondering how to either transfer the serial number to the end user's adobe account, or alternatively re-associate the acrobat on the end user machine with the end user's own adobe account.

    contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

  • How many computers can you authorize with one serial number?

    Hey guys.
    I'm thinking about buying a 2nd Mac, but I'm just curious how many total computers you have authorize Logic studio on at one time (my guess would be 3 but I hope more).
    Please let me know if you can.
    Thanks,
    Nathan

    I'll copy my post from the other thread:
    I don't know for the others but in my retail package ((not upgrade) I found two serial numbers. Though I haven't got time yet to try the second serial number on my MacBook, my logic says that with two different serials I could run both macs simultaneously and be on the network. But, my logic fails so often so it's better to shut my mouth, install Logic on MacBook and come back here again.

  • How many times can you use a serial number?

    I used my serial number on one computer and I'm trying to use it on the other computer. But, on the other computer, it keeps saying that the serial number is invalid. I checked my number to see if i typed it correctly, and its correct but it still wont work! So I'm wondering if you are allowed to use one serial number on two computers. (I'm triying to use it to download the Adobe Photoshop Elements 11 app)

    You need to contact Adobe Support when you have serial number and activation issues, either by chat or via phone.

  • My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

    My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

    http://support.apple.com/kb/TS2005
    http://support.apple.com/kb/HT1861
    https://ssl.apple.com/support/proapps/serialnumbers/

  • How do I find a serial number for my iPod touch that I used with iTunes

    I used my iPod touch previously to down load music and I am looking for the serial number for that device....is the information stored in iTunes somewhere?

    The serial number of your device can be located at the back. Check on this page for more information.

  • Error message with a Serial Number after purchasing CS6 Design Standard

    Hello everyone,
    I have an error message "we are unable to validate this serial number for CS6 Design Standard" when using my official serial number.
    I got the Serial Number from my Adobe ID account and e-mail purchase validation.
    And no phone number to contact. Someone knows what I could do ?

    You should Contact Customer Care via chat; phone support is only available Mon-Fri during US daytime.

  • DI API error while adding AP Invoice (Using serial Nos.)

    Hi,
    Im getting the following DI API error when adding an AP Invoice which has serial numbers and i cant seem to find any logical fault in the code.
    " [PCH1.WhsCode][line: 4] , 'This entry already exists in the following tables (ODBC -2035) "
    If anybody has encountered this error and found a solution kindly let me know.

    Hi Vivek,
    Are you trying to add same document number, serial number or so on?
    "entry exist " means like "duplicate key problem", I guess.
    Basically, whscode column in PCH1 table allows duplicating.
    So, I think serial number is duplicated among same item code.
    Hope this useful for you.
    Regards,
    Hyunil Choi.

Maybe you are looking for