Serious issues with the Internet after upgrading the Brothers drivers

I don't know if this is happening to you too, but after installing the last Brothers Printer Drivers, browsing of the internet is become a nightmare. Sites like macrumors.com or slashgear.com are not reachable anymore. Is like the mDNSResponder is not hitting the right DNS Query.
I will post this also in the Networking forum, but I this is happening after installing the Brothers update. And is happening on 3 different laptop.
Please HELP.

Similar Messages

Problems connecting to the internet after Upgrade from windows 8.1 pro

Cant connect to the internet after upgrading to windows 8.1 pro, what can i do to rectify this problem?
Thanks

Hi,
You can also try to install the older version in compatible mode:
Windows 8.1 Wifi showing "limited" or "No Internet Access"
Solution: revert your network adapter driver back to an older version
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
In addition, disable power management on your network driver:
Open Network and Sharing Center.
Click the Change adapter settings link in the upper left of the navigation pane.
Right click the network connection you want to enable/disable power management support on and click Properties .
Click Configure .
On the Power Management tab, clear the Allow the computer to turn off this device to save power check box.
If the issue still persists, please upload the event log for our research:
Kate Li
TechNet Community Support

Issue with VO extension after upgrading from 11i to R12

Hi All,
We are facing issue with VO extension after upgrading from 11i to R12(12.1.3).
Most of the cases we are facing issue as given below,
oracle.apps.fnd.framework.OAException: oracle.jbo.AttributeLoadException: JBO-27022: Failed to load value at index 21 with java object of type java.lang.Boolean due to java.sql.SQLException.
Please help me out to resolve this issue.
Any help/suggestion will highly appreciate.
Thanks & Regards,
Sunita

Hi Gyan,
Thanks for the response.
There is one attribute has added in VO query.
In VO.xml file ViewAttribute definition is as given below,
<ViewAttribute
Name="DisplayApproveButton"
IsUpdateable="false"
IsQueriable="true"
IsPersistent="false"
Type="java.lang.Boolean"
ColumnType="NUMBER"
AliasName="DisplayApproveButton"
Expression="xxh_invoice_approval_pkg.check approval(invoice_id)"
SQLType="BIT" >
</ViewAttribute>
Thanks & Regards,
Sunita

My usb modem will not connect to the internet after upgrading to OS X. The modem is active and was issued an IP addreess. There apparently is a connection error between the modem and Safari. Any ideas would be welcomed

MY USB modem will not connect to the Internet. The modem appears active on either USB ports and an IP address is assigned. The interface between the modem appears to be the problem. Any ideas?

mcaila wrote:
Update: I called my ISP (Verizon) and they were not much help.
What did have you do if anything?
I also tried to connect with an ethernet cord, and that too is not working.
What were the results from the Network Diagnostic test when connected by ethernet?
I've been searching online for hours and have found no solution that has worked.
What were those solutions that did not work other than what you already mentioned?

Unable to access the internet after upgrading to 10.5.2

Since I've upgraded to 10.5.2 recently, as in yesterday, my ability to connect to the internet has changed DRAMATICALLY!!! Basically to not at all! It seems that there is ALLOT of of traffic on the forums about this problem. But no responses seem to be given from a moderator or tech support.
I've had to downgrade the wireless to G or use the ethernet connection to get online. And that is just barely. I have NO problems with using my WIN computers on the same router. This all started when 10.5.2 arrived. Even when the network sys pref's reported back that I had an IP address on the router, it STILL didn't connect.
Does anyone from Apple read the forums???? It appears not. And it appears that Apple don't really care as the problem seems to have been going on for awhile!

Since I've upgraded to 10.5.2 recently, as in yesterday, my ability to connect to the internet has changed DRAMATICALLY!!! Basically to not at all! It seems that there is ALLOT of of traffic on the forums about this problem. But no responses seem to be given from a moderator or tech support.
I've had to downgrade the wireless to G or use the ethernet connection to get online. And that is just barely. I have NO problems with using my WIN computers on the same router. This all started when 10.5.2 arrived. Even when the network sys pref's reported back that I had an IP address on the router, it STILL didn't connect.
Does anyone from Apple read the forums???? It appears not. And it appears that Apple don't really care as the problem seems to have been going on for awhile!

Issues with wifi connection after upgrading to iOS6.

Does anybody know of an fix that actually works to fix a phone not connecting to wifi with iOS6? I have tried I think every suggestion people have listed on here and on the apple forums and nothing works.
Here is what I've tried so far:
Resetting the network setting on my phone - didn't work
Tried turning off the Cellular Data suggestion - didn't work
I have done the hard reset on my phone and restored it - didn't work
I have tried changing the security settings on my router - didn't work
I bought a new router because my previous one was a few years old - didn't solve my issue. I know it's not my router, I have other devices in my home that connect to the router as they should.
I would really appreciate some help with this to get my wifi working again. I'm also having the same issue like others that since the iOS upgrade my phone also seems to be using data at about double the rate it used to. In 9 days I've used over 1GB of my 2GB plan and that is ridiculous, I'm only using my phone for email which I don't get any large attachments and some random surfing the internet. It never used this much data before when I was somewhere where I couldn't connect to wifi.
Is Apple working on fixing this or is it an Verizion issue?

I went to an Apple Store today to see if they could help me out at all with this issue. I had found out that my phone will connect to wifi at work and amazingly at the Apple Store, just not at my house. Here is what they told me after I had run down all the options of what I had tried to change with them and nothing worked. Came to the conclusion that it is more than likely a software issue and after doing some research at the store Apple is aware of the problem they told me. Apple is working on correcting the issue and is beta testing an updated iOS at the moment and just need to be patient for them to release it. The only immediate fix they gave me as an option was to purchase an Apple router for the time being and that should cure the connection problem. Since I had just purchased a new router a couple weeks ago I didn't feel like buying another one. So I hope this will help some people that have been searching for an answer to this problem like I have and have gotten no help from anywhere...

Issues with SharePoint 2013 after upgrading from windows 2012 to 2012 r2

We have a Sharepoint with Sp1 environment on windows 2012. Recently we upgraded the windows 2012 to 2012 r2. After the upgrade sharepoint environment is completely unstable.
At first all the sites returned 401 errors. After resolving by resetting the object cache accounts the sites are back.
Then i see that none of the performance point dashboards work. I figured that claims to windows token service is defaulted to local system account. I previously configured with a domain account. I reconfigured to work with domain account.
All the dashboard pages throw error.
Some Error logs:Failed to get document content data. System.ComponentModel.Win32Exception (0x80004005): Cannot complete this function at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow
Application error when access /Dashboards/Performance Dashboard/Main.aspx, Error=The EnableScriptGlobalization property cannot be changed during async postbacks or after the Init event. at System.Web.UI.ScriptManager.set_EnableScriptGlobalization(Boolean
value)
4. I tried to create a new dashboard and this time the performancepoint designer wont launch. After some troubleshooting i see that c2w host file didnot have the caller C:\Program Files\Windows Identity Foundation\v3.5.
I added <add value="WSS_WPG" /> and now it launches
5. Now the Dashboard launches and peruser identity works without having kerberos enabled at IIS. I have all the spn and required delegations setup for this url . But i did not configure at the IIS level
yet.
It looks like lot of things got messed up and reset. Can we upgrade to windows 2012 r2 with a sharepoint application inplace. what is the recommended approach and Whats happening with Performancepoint dashboards. IS there a known issue with sharepoint 2013
sp1.
Raj-Shpt

Thanks for the above article. Few issues are solved . One of the main issue is with Performancepoint Dashboard.
I have all the spn and required delegations setup for this url . But i did not configure at
the IIS level yet. Still per user identity works without having kerberos enabled at IIS.
Raj-Shpt

Issues with wifi connection after upgrade 10.8.5.

After the upgrade, wifi empty triangle. No way to activiate the wifi. Need to reboot 3 times (just reboot, any other action) to finally have the wifi activated and the connection working.
Known issue in this version? Fix planned?
Thanks.

I went to an Apple Store today to see if they could help me out at all with this issue. I had found out that my phone will connect to wifi at work and amazingly at the Apple Store, just not at my house. Here is what they told me after I had run down all the options of what I had tried to change with them and nothing worked. Came to the conclusion that it is more than likely a software issue and after doing some research at the store Apple is aware of the problem they told me. Apple is working on correcting the issue and is beta testing an updated iOS at the moment and just need to be patient for them to release it. The only immediate fix they gave me as an option was to purchase an Apple router for the time being and that should cure the connection problem. Since I had just purchased a new router a couple weeks ago I didn't feel like buying another one. So I hope this will help some people that have been searching for an answer to this problem like I have and have gotten no help from anywhere...

Issues With iPad mini after upgrading to iOS 8.1.2......

WWish I'd checked the forums first, but I upgraded to 8.1.2. A few days ago and have had nothing but issues.
FIrst -- it takes twice to three times as long to boot up my device.
           After the apple logo disappears, the screen is just black for the longest time
           Then eventually I hear a faint "DING" and the screen eventually gets lighter but this takes about 5-6 minutes
           Haven't had time to check the new manual.... Is this normal?
second -- Lots of freeze ups doing any variety of functions
third -- When tapping to diwnload a WORD attachment in an e-mail.... the circle graph loads properly but the document never opens when tapped.
           I'm not sure which is the most frustrating, plus there's no way to TURN OFF that dorm Emoji Keyboard which just gets in my way far too often!!
any body have any work around for any of these???
i No longer love my iPad...that's for sure.

How do you know some stop halfway and others barely start? What are you seeing? While it is possible an app is not compatible with iOS 8.1.2, but I doubt it. If it was working with iOS 8, then it will work with 8.1.2. Try signing out of the App Store and sign back in again.

Facing issue with SSO communication after Upgrade to SAP EP7.31

Hi Experts,
This is happening post upgrade of system from 7.0 to 7.31. We are using SSO to connect ECC(back-end system) in two ways, logon Ticket and User-Mapping
Issue:
When we click on a tab, lets say "A tab/ User Administration Tab" which uses User-Mapping to communicate with back-end system and clicking on another tab say, "B tab / Content Administration Tab" in portal which uses Logon Ticket to communicate with back-end system.
When both the tabs are clicked one after the other the SSO communication should be different, but in our case it uses the same SSO communication for all the back-end communication, which does not delete the cookies / uses the different SSO mode of communication when clicked on the other tabs.
Kindly help to solve this issue.
Thanks,
Preetha Balan

Hello Preetha,
Go to SAP Service Marketplace - Home -> Services and Support (from the menu) -> Report a product error (on the right side under "Need technical assistance?")
In the meanwhile you can also search for a solution in the SAP notes in the same place but go to the link above "Search for SAP Notes and SAP Knowledge Base Articles.
Best regards,
Donka Dimitrova

Serious issue with MacBook internet connectivity

I have owned a 2009 MacBook since around 2011, when I bought it new. Since then, I have had several relatively minor issues with it, including common ones with the trackpad malfunctioning (it needed a new battery). Since last night, however, it's ability to connect to the Interwebs has suddenly vanished. It's not like the cause of my problem is a huge mystery; there was another problem involving the apparent 'simulated' holding down of the power button, making it impossible to turn on without force shutting down after a few seconds. This seemed to resolve itself eventually, after I sat up too quickly and it narrowly avoided being badly smashed on my floor when it tumbled off of the futon. Ouch. However, there was a minor bump before I was able to catch it. I worried that it would be broken, but it actually managed to somehow resolve my previous issue with random shutdowns when it turned on. After this, though, I was stymied by it's inability to connect to the Internet at all. I tried WiFi, Ethernet, circumventing the router with another Ethernet cable, and many other possible fixes. No luck. I'm currently typing this on a seperate computer, which has got internet connectivity with wireless on the same network. With the wireless connection, which was working before the power button incident, I am able to see the network and connect, but then I can't actually resolve my connection. In the native internet support program, I am reportedly able to connect to the network and ISP, but not the internet or test server. I have contacted my ISP, and they vaguely insinuated after half an hour on hold that it should be working just fine. Very oddly and suspiciously, whenever I try to open the normal network control panel in System Preferences, the pane blinks briefly and stops responding, to the point that I left it loading and went to bed. This morning, it was still attempting to load that preference pane, and I'm really pretty confused. What is going on? In case it helps, the corner that hit the floor was the upper right hand one, I have to think that it may be a hardware issue, since I've spent quite a bit of time on software fixes. This is my first question to the community so far, so if I've misplaced it or doen something wrong, I apologize.
Thank you in advance!

I have a MacBook Pro that I purchased in April 2007 and am having exactly this issue. I went to start up a program, my screen went black and the computer crashed. I rebooted and my screen had the diagonal lines as in your image. I believe it booted up properly once or twice but crashed again before long. Repeatedly now, the ugly lines are there, the boot up screen shows up in the background and eventually it gets to a blank blue screen and nothing else happens. Sometimes it just shuts down. I did get the install disk and try the hardware test by booting up the disk and holding down the "d" key. The first time I did this it kind of made the screen clear up and reported that there were no hardware problems. I restarted from there and actually had my computer back for about 15 minutes. Then it died again The hardware test didn't have the same impact the second time I tried it but still reported no problems. Still stalling at the blue screen. Does it have something to do with Leopard 10.5.8?? I updated to that a couple of weeks ago. Seems kind of random and inexplicable. Oh and I actually saw a wee puff of smoke at one point near the power button. Is something frying? I really would like to figure it out so A) I can rescue all my stuff that's on that machine and B) if I can fix the problem the computer will still be of use.

Issue with multi-monitor after upgrading to Mavericks

I ran Mountain Lion OS on my MacBook Pro along with VMWare Fusion 5 with an extra monitor and everything was working fine till I upgraded to Mavericks. Since then, I am not able to see the 2nd monitor in the Extended Mode.
on Apple, everything is work and I see two monitors and can move one window from one display to another but when I open my Windows in Fusion, only one display is accessible (the 2nd display showing Apple screen, which wasn't the case before). Even I can see that the color settings I had done before for my additional monitor is not in place after upgrade.
I have checked my WIndows and settings are fine as it was before. It's Windows 7 Pro. I read some articles that I have to upgrade to Fusion 6 and some others that mentioned this is an issue with Mavericks and upgrade won't fix it. So, I am looking for some advice or similar experince, if any.
Thx in advance for your help.
Behzad

Update: I can see that Windows act as it is two displays but the 2nd display is in nowhere and I cannot see it. I mean the window can go out of my normal display (i.e. my laptop) but not to the other monitor. That's why I have to disconnect the 2nd monitor and only use laptop display.

Unexpected Termination SSIS package - Issue with SSIS packages after upgrading to SQL Server 2014

Hello everyone.
We performed an upgrade of SQL Server 2012 installation to SQL Server 2014 (with last CU5 update). We found that all SSIS packages (even the simplest with just Execute SQL tasks) fail with Unexpected termination message. The issue reproduces with both new
packages (that are created from scratch with SSDT 2014) and old packages (migrated from SQL 2012).
Any ideas, please? We googled and found that it is a known issue that should have fixed with CU4. But we use CU5 and the issue is still here.
MCP

Hi. Yes...
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="SQLISServer" />
<EventID Qualifiers="0">1</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-12T07:41:56.000000000Z" />
<EventRecordID>469950</EventRecordID>
<Channel>Application</Channel>
<Computer>abtru1a11.oneabbott.com</Computer>
<Security />
</System>
- <EventData>
<Data>The SSIS Execution Process could not write to the IS catalog: ABTRU1A11\DEV:SSISDB Error details: Cannot find the symmetric key 'MS_Enckey_Proj_Param_5', because it does not exist or you do not have permission.; at System.Data.SqlClient.SqlConnection.OnError(SqlException
exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior
runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion,
Int32 timeout, Task& task, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader() at Microsoft.SqlServer.IntegrationServices.Server.Shared.ExecutionParameterLoader.GetExecutionParameter() at Microsoft.SqlServer.IntegrationServices.Server.ISServerExec.ProjectOperator.StartPackage()
at Microsoft.SqlServer.IntegrationServices.Server.ISServerExec.ProjectOperator.PerformOperation()</Data>
</EventData>
</Event>
MCP

My imac cant regconise the finder after upgrading the itunes7!!!!!!

after restart, the computer seems to run slower, only the top right icon shows up but the others run slowly. also there's no icons (all the folders & files) on my desktop!!!!!!! when i click the tool bar's finder icon, it doesn't work!!!! only safari survives!!!!
what's wrong with my imac????? is it the itunes issue or the hardware problem (something crashing?)
please help!!!

"Is it run under disk ultility?"
Yes.
"so what should i do after doing that?"
Restart. See below.
Save and/or quit your applications & doucuments
Go to Applications>Utilities Folder
Click Disk Utility
Click the Volumn (HD) that you want to check.
Click the Repair Disk Permissions button. (Don't worry about verifying)
When the repairs have finished, you will see the “most important thing”:
Permission Repairs Complete
The previliges have been repaired or completed on the selected volumn.
Restart your computer.
See Knowlege Base Article http://docs.info.apple.com/article.html?artnum=106214 Using Disk Utility and fsck to resolve startup issues or perform disk maintenance
It is recommened that you should Repair Permissions:
After installing and/or updating an OS
After installing software
===================
Regarding the "Norton AntiVirus Error", apparently you need to update your Anti Virus program and/or should have disabled it when updating iTunes if the downloading instructions stated so.
If you still receive the error after repairing permissions, you will need to run LiveUpdate to update Nortons per their procedures.

Airport will not connect to the Internet after putting the airport into nat porting and putting the Xbox 360 ports in

When trying to set up port forwarding for Xbox, I lost Internet when I updated the new settings. When I removed the port forwarding and unchecked the nat box, the Internet ip came back. Any help would be appreciated.

I had a chance to bring it in to the Genius bar today. My worst fear was that after everything I had tried, it would work at the store. It did. ("Are you sure you plugged it into the port with the circle?") Luckily, it died after about 2 minutes, which apparently was what it had been doing. So the Genius worked on it. And worked on it. After my 8 hours of troubleshooting, it was almost worth it to see a Genius stumped. A half hour later, he decided that the Airport was toast, as I had suspected. It would cost him $300 to order a replacement, so he said to just get a new Airport. The new Airports are not cheap. We ended up getting a Linksys WRT54G for 50 bucks, and I set that up in a few minutes. I got a cool-looking broken Airport out of the deal, though, which will look awesome, even if it doesn't work.

Serious issues with the Internet after upgrading the Brothers drivers

Similar Messages

Maybe you are looking for