Serious Problem after update my 5800 with 40.0.005...

Yesterday,I updated my 5800 with FW 40.0.005. I really impressed with the new easy way of move in touch screen but this version has a big problem that I considered.
First,you have to set as a ring an .mp4 file or any video file and then lock your mobile 5800.
When you have an incomming call the screen isn't working normally and it stops for miliseconds and starts again!
When it happens the power of mobile increasing sharply and I am upset what it could happen if the call continue too much.
Please somebody check it as soon as possible because it may do harm to our mobile by any explosion from this problem!
For temporary solution a suggest not to set video files as a ringtone and if you want to do this don't lock your mobile which helps the video file to work normally.
With regards,
Stelios
Solved!
Go to Solution.

Dear all
kindly visit the below link and read all the actual exp b4 updatig to V40'
NOKIA 5800 V40 BUGS
there are alot of bugs in v40 and its is discover by the ppl like you. I Have MY nokia 5800-d1 with the RM-356 type having SWV:21.0.0.25.
I am happy with it as i dont want to loose my data and time. It cost me alot
THE PRIOR KNOWN BUGS IN V40 UPDATE
NO RDS IN Radio Option (It was there in previous all version till V30&31) 
Radio application can't be exited in the end
some application icons are multiplied like in previous firmware version 
Thumbs of contacts on HS are loading too long
listing files in Settings/App mgr/Installation files takes way too long too
The screen won't turn off when you plugged the power. Same that it won't turn off after you unplugged from power.
Applications cannot be uninstalled. It says "Unable to start the installer" or something like that the radio application could not be quitted
The new SW update doesn't allow me to install updates. It just says fail...
Most of the time, the music player cant be closed and the song will show right on the home screen.  my screen backlight also not go off when plug in or unplug the charger
Normally, when your 5800 full charged, it will beep and turn on the screen for couple of seconds. Now it won't turn off once this was triggered.
In Messaging, message won't open on tapping ! The message seems selected, and doesn't respond to tapping(single or double) ... then options for message also doesn't open, only option is to exit messaging
Frequently it happens I must remove SD before I can install/remove programs
video player bugs (many video played improperly, sound played without images. or freeze at some point, but the sound continues
Unable to install Opera Mini from Ovi Store and from Opera.com website download
Regards
Ahmad Ladhani

Similar Messages

  • Problem after update for 5800 xpress

    i have a nokia 5800 xpress and i updated it by internet and now i cant open my profiles ringing tone because the phone tells me there is low memory to acses tones . can i format the phone memory with out harming my phone . or any type of help can i get and thank you.
    phones i have 2730c - C1
    KUDOS ME IF YOU FIND MY ANSWERS HELP FULL
    Solved!
    Go to Solution.

    make sure you have a back up of your data and try code number 2 see if this works for you 
     1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
    Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
    2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
    3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. ) For Nokia N97 (unofficial version but works) is SHIFT /SPACE BAR / BACKSPACE while holding the power button. Again do not let go until you see the handshake screen.
    If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance. 
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Serious problem after updating driver

    Hello
    Im using GTX 960 2G 128bit,on Giga Z97 Gaming boad,with i7 4790K,
    i dont know what is the matter ,but when i update my driver,or after several restart i think,i monitor my core and mem clock with MSI after burner and i have noticed ,my card const...

    I google can't log in steam and lots of complaints out there and some workaround provided. Have you tried those workaround? Like flush DNS, reinstall steam, disable anti-virus or firewall app, even this video....
    https://www.youtube.com/watch?v=gkBmos9...

  • N560GTX-Ti OC problem after update VGA BIOS with Live Update 5 | SPLIT

    Hello there. You people say the latest BIOS version for 560 OC is 201, but mine is totally different: 70.24.0a.00.00.
    And I experience strange stuttering in all of the games. Maybe BIOS upgrade is needed?
    S/N: 602-V238-16SB1101160663

    Could you please give me the password for the attached file (201ti_Svet.rar)? I'm having occassional freezes with my GTX 560 Ti Twin Frozr OC (system completely stops responding while display and sound freeze and it takes around 5 seconds for the PC to respond to reset button). This happens, for example, under Windows 7 in 3DMark11 Deep Sea Demo and in Windows XP randomly, but most often in web browser when watching Adobe Flash content with hardware acceleration enabled? I sincerely hope that BIOS update will help. Thank you in advance.

  • Cpufrequtils problem after update

    Hello!
    I've a problem after update my system with pacman -Syu.
    When system loads cpufreq i've this problem:
    cpufreq-set: error while loading shared libraries: libsysfs.so.1: cannot open shared object file: No such file or directory
    I try uninstall the cpufrequtils package and reinstall it but doesn't works
    How can i fix it?
    thanks.

    raskolnikov wrote:
    No need of cpufrequtils :
    $ cat /etc/rc.local
    #!/bin/sh
    echo conservative > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
    That's ok. And of course powernow-k7 in MODULES array of rc.conf
    Sure, that's pretty much what cpufrequtils do, however, they a) don't spawn a shell process and b) allow you to configure sudo to handle user-based changes.  It's just a nice wrapper for that.
    raskolnikov wrote:BTW the last update of this (cpufrequtils) package has overwriten my /etc/conf.d/cpufreq file, is this a normal comportement ? This file was not in NoUpgrade as if I remeber correctly, NoUpgrade was deprecated with last pacman package...
    Errm, blame me - that file should be backed up.  Thankfully, it's not a giant config file.

  • My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

  • HT6147 Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem?

    Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem? I lost my notes, calendar, songs, games+ more. I've tried everything to restore these, but it won't let me. HELP!!!!'

    Restore from iCloud Backup
    1. Settings>General>Reset>Erase all content and settings
    2. Tap Erase
    3. You'll see Apple logo and progress bar
    4. Hello
    5. Slide to set up
    6. Set language
    7. Set country
    8. Choose Wi-Fi network; enter Wi-Fi password
    9. (a) Use Location Service (b) Don't Use Location Service
    10. Select option
    11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    12. Selected Restore from iCloud Backup
    13. Enter password for iCloud
    14. Agree to Terms and Conditions
    15. Setup Apple ID
    16. Select backup
    17. Restoring from iCloud
    18. Hello
    19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
    20. Continue
    21. Finish setting iCloud enter Password
    22. Updating iCloud settings
    23. Create a Passcode
    24. Welcome to iPad
    25. Get Started
    26. Restoring Apps and Media
    27. Enter Apple ID and Password
    28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
    29. Connect iPad to iTune to sync with computer
    30. Sync Music, Videos and Album Artwork

  • Serious problems after Mavericks installation with External Drive Lacie P9220.

    Experiencing serious problems after Mavericks installation with External Drive Lacie P9220 1TB. Mac Finder totally locked!
    I had to format the External hard drive with a Windows PC (fat32), then format again with my IMac (mac Journal.) and hopefully restored data from time machine backup.
    So far so good but system looks unstable. Some software were not able to write on the hard drive.Some strange things happens. With Mountain Lion never had an even minor issue.
    I read many discussion regarding problems with WD, just wondering if anyone had the same problems with Lacie and if there is any tip to solve the
    problem.
    Many thanks.
    Marco

    Thanks very much for your reply.
    Unfortunately I couldn't find a solution because the article refers to whom have configured the drive with included software and drivers that came with the drive.
    This is not my case, I never used any third party soft ...only OS X disk utility ...
    best
    marco

  • HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

    I have 4s with 16GB storage capacity using IOS 7.1.2.
    Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
    Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
    Kindly resolve the issue as soon as possible
    Ashish
    [email protected]

    Did you already try to set it up as a new device, as explained in this article?
    iOS: How to back up your data and set up your device as a new device

  • After updating my Ipod with IOS 5, some of my music no longer plays. Album cover is shown, but the IPod skips to the next song. Any ideas why?

    After updating my Ipod with IOS 5, some of my music no longer plays. Album cover is shown, but the IPod skips to the next song. Any ideas why?

    A not uncommon problem.  See this previous discussion.
    Problems with IOS 5 Music App (Updated)

  • White screen problem after updating to 1.1 firmware

    My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
    Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

    Disconnect iPod and close iTunes.
    Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
    You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
    Remove 1.1 files from the folder so that only those to files are in there.
    Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
    Fujitsu Siemens Amilo M3438G   Windows XP  

  • Photoshop CS2 problems after updating to 10.4.5.?

    Anybody notice Photoshop CS problems after updating to 10.4.5.?

    Hello I had the same problem
    I found the following information that helped me.....
    Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
    Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
    Issue
    Adobe Photoshop CS2 returns one of the following error messages:
    "Could not complete your request because of a program error" when you try to open a file.
    "Could not create a new document because of a program error" when you try to create a new file.
    Solution 1:
    Install the most recent update to Mac OS.
    Solution 2:
    Re-create your preferences files.
    1. Hold CommandOptionShift when you start Photoshop.
    2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
    Solution 3:
    Disconnect your Internet connection.
    To disconnect your Internet connection, do one of the following:
    If you are connected to the Internet via a telephone modem, then disconnect from the modem.
    If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
    Solution 4:
    Use a disk repair utility.
    Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
    Solution 5:
    Ensure that all your drivers are compatible with Mac OS X v10.4.
    Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
    Solution 6:
    Re-create your printers in Mac OS X.
    To re-create your printers, first delete them and then add them again.
    To delete your printers:
    1. Open System Preferences from the Apple menu.
    2. Select Print & Fax, and click Printing.
    3. Select each printer in the list and click the delete key (the minus key).
    For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
    The one that fixed it for me was solution 6 -- re-creating my printers
    I don't know why but it could be worth a try
    Good luck
    ADAM
    17" Powerbook G3 iMac   Mac OS X (10.4.3)  
    17" Powerbook G3 iMac   Mac OS X (10.4.3)  
    17" Powerbook + G3 iMac   Mac OS X (10.4.5)  

  • Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

    My device is Iphone 5 64gb IOS 8.
    I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
    1. How can i fix it?
    2. Or how to rollback to IOS 7+ ?
    3. Should i come to app store with this problem?

    I'm having this same problem too.  Worked fine prior to iOS update.  I contacted Verizon this morning who advised that this is a known issue.  They suggested I backup my device, and perform a factory data reset.  When prompted to update to iOS 8 again, re-installation has been known to resolve the issue.  With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

  • I have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

    i have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

    Hi all
    Like to share that my AV Adapter problem is solved ... brought it to Apple Service Center as a last resort after the new iOS v5.1 did not solve mine like some others have theirs solved.
    In fact, the Apple Service Center tried my AV Adapter and find that it does not work with their iphone and ipad too and flagged for a replacement.
    Just this week collected the replacement and tested that the replaced adapter works !
    So this "unsupported device" error msg could also be due to faulty adapter .... although it is unbelievable that a "simple" wired connector could so easily breakdown after 1 time use !   I never did believe that it can be broken so easily as we hardly used it after the first testing with our TV on HDMI.
    Closing this chapter of mine finally.

  • Bluetooth problem after update to lollipop

    Hi,I've recently updated my 6503 to Lollipop.Everything went smoothly and is working fine, except 2 issues - one solved, second NOT. FIRST (solved) - phone after update waked up and logged to 2G network, with no data transmission (despite it was turned ON). What was strange - my operator's network appeared in 'available network list' as separate 3 NETWORKS ( 2g, 3g and LTE) Switching manually to LTE solved it - now phone is switching between technologies automatically, data transmission is working fine. SECOND AND NOT SOLVED: I'm using the hands-free system built in my car ( mitsubishi lancer, 2008 ) . After update, phone failed to establish connection with it, even hands-free system remained as 'associated device'. OK ... I erased hands-free system from phone, as well as phone from car's memory. Paired devices again - starting procedure from car's side. Nothing better. Erased and paired starting from phone side. Nothing better.What I've  observed more: phone after try to establish connection , phone in eye blink looses it. On list of available services of hands-free system (in phone menu ofc) , only 'phone sound' appears, while -as I remember but i'm not sure- before update more (2 or 3) services were detected .   PLEASE HEEELP !  

    Re: Bluetooth problem after update to lollipop As above post, I am also experiencing problems with bluetooth on my Z2:- Phone connection is OK if Bluetooth is turned on the phone for " car is ready". Then I can make and receive calls.
    - Playing music on bluetooth does not work after Lollipop 5.0.2 update on my car head unit. Previously connected and able to stream music on 4.4.4 Kit Kat with no issues, looking on web this is not a new issue with Bluetooth connection issues to devices since Lollipop came out so what the **bleep** is going on? I purposely bought a Sony TV, Car Head Unit and Soundbar to ensure everything worked together now the head unit that I only had fiitted in February does not connect which cost me £249!!! No issues connecting to TV or Soundbar but on HU it tries to connect then disconnects and BT Audio Icon on HU display greys out although phone is connected and icon highlighted as connected. I have cleared cache, unpaired and paired again, reinstalled 5.0.2 again through wifi instead of OTA but still the same. Car device: Sony XAV-602BTAndroid version 5.0.2Version: 23.1.A.0.726

Maybe you are looking for