Server 2012 extremly slow

Hi!
Just installed MS Server 2012 R2 Standard 64-bits on a HP Pro Liant 380p host. When trying to connect the network cable to the network and domain the GUI becomes extremly slow (can't drag the mouse without waiting for some seconds or open windows). We
have no indication on the preformance meters and need to unplug the cable to be able to use the GUI. Anyone have a solution for this problem?

Hi
I would suggest getting up to date drivers for the machine. Also check the event viewer on what is failing.
how much ram do you have in the server?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Drivers is up to date, event viewer gives no information and it's 96GB RAM installed.

Similar Messages

  • Exchange 2013 with Outlook on RDS Server is extremely slow

    Exchange 2013 CU5 on Server 2012 R2 fresh install/new to domain; Outlook 2010 or 2013 on Remote Desktop server not in cached mode is slow to open, search and send messages with attachments.  Opening messages and opening attachments runs quickly.  
    My test mailbox has 300kb worth of mail in it and sending a message with a 5Mb attachment locks up Outlook for close to 1 minute and takes another 30 to 90 seconds to disappear from the outbox and and move to sent items.  This issue does not present
    itself in OWA.  My current testing RDS environment is a fresh install of Server 2008 R2 with Outlook 2013.  No additional add-ins or AV running on the Exchange server or the test RDS server.
    When cached mode is enabled, Outlook runs better as shown in Outlook 2010 (+ Exchange 2013) works extremely slow; however, I don't consider this an option because there isn't enough drive space on the RDS server to cache all of the user profiles.  
    Other Exchange environments - Outlook 2010 or 2013 in an RDS environment (non-cached) with Exchange 2007 or 2010 - don't show the same performance issues.  Moving within Outlook and sending large attachments runs quickly.
    I have checked Exchange throttling settings and monitored logs, but have not found cases where my test user is being throttled.  I have also looked at turning off IPv6 based on another post's suggestion; however, I have seen conflicting information
    about disabling IPv6 for Server 2012 R2, so I have not yet gone down this path.
    The Exchange server is a VM on a new VMware host and has assigned 8 cores from Intel Xeon E5-2640 procs and 16GB RAM; 1TB thick provisioned database volume on a RAID 5 array with 6 x 10k RPM SAS drives.  Disk queues are low on the Exchange server (in
    the .20 to .70 range).  My test RDS server is on the same VMware host on the same vSwitch.  Another test system is on a different system, but exhibiting the same behavior.

    Hi,
    How about the suggestion from Festivalman?
    Feel free to contact me if there is any update.
    Thanks
    Mavis
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Server 2012 R2 slow performance over all

    This is a DELL PowerEdge R820 / 256GB RAM / 4TB onboard storage configured as Remote Desktop Services Host /TS... running QuickBooks, MS Office 2010 STD, Symantec EndPoint Protection (basic antivirus installation ONLY)... 1 month old server... SUPER fast,
    super powerfull.... Part of an AD in SBS 2008 Premium... single NIC card 4 ports / 3 ports disabled. single IP... no VLANS... server is able to resolve ANY pc, DNS record with no problems... able to resolve DC by name, able to receive GP, able to update, able
    to do everything that I can think of.... EXCEPT... anything I open, word, excel, QuickBooks, IE.... takes forever to open... after the application is open is fast but to open anything takes 3-4 minutes.... open ticket with Symantec all looks good, created
    lots of exceptions for antivirus/real time scanning, open ticket with QuickBooks: files look good application was removed and reinstalled to be sure all was done correctly... check the binding order for the disabled NIC; the active one is TOP option, no errors
    at all in event viewers for system, application, setup, no errors at all in DELL management tool, no hard drive errors, no controllers errors.... this server is replacing an old dell poweredge 2008 STD with 24GB RAM... the old DELL opens the same applications
    way faster than the new one... same Quicken version; old server opens Quicken in seconds, new one 3-4 minutes..... Real time monitoring NEVER goes above 1% for CPU and 3% for memory utilization.... one more thing... removed antivirus 100% restart... same performance
    without antivirus.....
    Any ideas will be great as of how to troubleshoot the slow performance....
    Thank you!

    Hi,
    As Sam suggested, please check if there any issue occurred in hard drive.
    On current situation, please also refer to following steps and troubleshoot, then check if we can find more
    clues.
    Please check if you have installed all necessary updates for the Windows Server 2012 R2.
    Please
    perform a clean boot to check if there has software conflicts.
    Please use Resource Monitor to troubleshoot and check if we can find some more details.
    Using Resource Monitor to Troubleshoot Windows Performance Issues Part 1
               Using
    Resource Monitor to Troubleshoot Windows Performance Issues Part 2
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Windows Server 2012 very slow performance executing files

    Hello,
    I am running windows server 2012 as dc with 2 clients connected running win7 pro x64, this is a new setup.
    Whenever i try to open a large file from the client or an application from the client it takes forever to startup or to load. The performance monitor indicates a maximum workload of 15% at all times.
    I have tried all the following potential solutions i found, however none of them seem to do the trick.
    - enable write cache = http://social.technet.microsoft.com/Forums/en-US/a76f6e97-3266-4ba1-ba90-ad5318ec4937/slow-file-sharing-performance-on-windows-server?forum=winservergen
    - change group policy = http://support.microsoft.com/kb/829700/nl
    - change group policy as = http://social.technet.microsoft.com/Forums/en-US/bcb4b580-50ef-4f10-bc9b-16db1bf24804/slow-network-file-execution-on-windows-server-2012?forum=winserverfiles
    Does anyone have any ideas?
    With kind regards

    Hi,
    You could disable SMBv3 on server 2012 to check if the issue related to SMB protocol. 
    How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012
    http://support.microsoft.com/kb/2696547/en-us
    Warning: We do not recommend that you disable SMBv2 or SMBv3. Disable SMBv2 or SMBv3 only as a temporary troubleshooting measure. Do not leave SMBv2 or SMBv3 disabled.
    Please also refer to the Forum FAQ to troubleshoot the slow performance issue:
    [Forum FAQ] Troubleshooting Network File Copy Slowness
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/7bd9978c-69b4-42bf-90cd-fc7541ccb663/forum-faq-troubleshooting-network-file-copy-slowness?forum=winserverPN
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Server 2012 incredibly slow

    I have a Dell Precision T7400 that I use as a backup file server installed with Windows Server 2012. I'm not expecting fast boot times with 2 RAID controllers, so that's not my issue, but the slowness lies with the behavior of the OS itself. If i'm doing
    simple things like backing up files, and I try to launch Firefox while doing that, Firefox takes about 3-5 minutes just to load. I have tried IE, but that just crashes immediately upon launch, and that takes even longer to load. The server doesn't have too
    many roles, so it should be this slow. The hardware I have is as follows:
    1x E5420 Quad Xeon 2.5Ghz | 4GB Buffered RAM | 1x Nvidia Quadro FX1700 512MB | PERC 61 RAID controller + internal RAID controller | 500GB 7200rpm boot drive on internal, 2TB 7200rpm + 1TB 7200rpm using RAID 0 on PERC
    I thought 4GB would have been enough to run a file server and its basic functions, but is this not true? What else could it be?

    So when we start talking performance we have to take the entire system into account.
    Under 2012 if you open perfmon, Navigate to System Performance, then click the run button
    That will take awhile and you should do that while it is having performance issue.
    It will create a report under the reports folder
    Software that you have installed on the server also has an effect on overall performance. Things like endpoint protection and antivirus can have a big impact.
    Some antivirus can become overly aggressive with the scanning of files as they are being read from or written to disk, inbound on the network card and outbound on the network card.
    Raid card configuration can have an impact as well based on how the onboard raid controller cache (if any) is setup (2 settings that come to mind are the adaptive read ahead and write back)
    Another thing to note about caching, some of Windows Roles and Features will disable the cache on the system partition. Active Directory, DFS, DHCP, SQL and pretty much anything that utilizes a jet database. This is a performance hit but will save your data
    on a power outage.
    If IE crashes on launch, that does not build confidence in the install or applications that may be running.
    You can do a clean boot http://support.microsoft.com/kb/929135
    Follow the Windows 8 instructions as that's the same for 2012.
    Hopefully that helps.
    Brad Held http://windorks.wordpress.com

  • Windows server 2012 standard - slow performance in file sharing

    I recently installed two windows server 2012, one is for DC, one is for File Sharing; it works fine in the beginning.
    Lately, it comes a problem, every once a while it is very slow when opening a file on the server from a client PC; but when i restart the file server then  it will be fine again.
     

    Hi Simon,
    Based on your description, how is the workload of the file server?
    Before going further, regarding slow network performance when opening a file that is located in a shared folder on a remote network computer, the following article can be
    referred to as reference.
    Slow network performance when you open a file that is located in a shared folder on a remote network computer
    http://support.microsoft.com/kb/829700
    Besides, the following thread may have focused on the similar issue and can be worth taking a look.
    Slow network file execution on Windows Server 2012
    http://social.technet.microsoft.com/Forums/en-US/bcb4b580-50ef-4f10-bc9b-16db1bf24804/slow-network-file-execution-on-windows-server-2012?forum=winserverfiles
    Best regards,
    Frank Shen

  • Windows server 2012 R2 Slow RDP

    Hi 
    I have server 2012 R2 Datacenter installed on HP Proliant 380 G8. All drivers and firmwares are updated and confirmed by HP. The machine is quite powerful with hundreds of gigs of RAM. 
    When I RDP into the machine, The screen hangs on "welcome" screen for a good 10 seconds. Same hardware with server 2012 Datacenter is much faster. It is also fast with 2008 R2. 
    I deployed 4 servers so far and all have the same issue. 
    Has any one experienced this slowness before?
    I appreciate any help.
    Thanks

    Hi Atif,
    Thank you for your posting in Windows Server Forum.
    First of all please try to provide TP’s answer. In addition, what’s the version of client OS and RDC? If you are using Windows 7 then use RDP 8.1 for better performance. Apart from this, try to DisableTaskOffload in the IP-parameters. For more information,
    kindly go through beneath article.
    Performance Tuning Windows 2012: Network Subsystem–Part 1
    Also try to configure below setting, might helpful for your case.
    On the server:
    Computer Config > Windows Settings > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections > Select RDP transport protocol = Use only TCP
    On the client:
    Computer Config > Windows Settings > Admin Templates > Windows Components > Remote Desktop Services > Remote Desktop Connection Client > Turn off UDP on Client = Enabled
    Hope it helps! 
    Thanks,
    Dharmesh

  • Yosemite made my MacBook Pro (Mid-2012) EXTREMELY slow

    Yosemite has really gummed up my system. I'm reluctant to do a clean install, but I will if absolutely necessary.
    This is what Etrecheck says. Any thought will be repaid by my eternal gratitude.
    Problem description:
    Macbook Pro (Mid-2012) is slow and lags following Yosemite installation.
    EtreCheck version: 2.1.8 (121)
    Report generated February 16, 2015 at 12:09:29 PM AST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
        MacBook Pro - model: MacBookPro9,2
        1 2.5 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 11
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1280 x 800
            Thunderbolt Display 2560 x 1440
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: one day 0:5:13
    Disk Information: ℹ️
        APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk2) / : 498.88 GB (390.89 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 499.25 GB Online
        HL-DT-ST DVDRW  GS31N 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Fitbit Inc. Fitbit Base Station
        Apple Inc. Apple Thunderbolt Display
        Apple Inc. Display Audio
        Apple Inc. FaceTime HD Camera (Display)
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
            Apple Inc. Thunderbolt Display
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.cmfsyncagent.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        3 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.wdhelper.plist
        4 processes killed due to memory pressure
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.fujitsu.pfu.ScanSnap.AOUMonitor.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.sophos.uiserver.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.ciscosystems.ciscoconnectupgrade.daemon.plist [Click for support]
        [running]    com.fitbit.galileod.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [running]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.sophos.common.servicemanager.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [running]    com.akamai.single-user-client.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        Family    Volume  (/Volumes/Family)
        Eye-Fi Helper    Application  (/Applications/Eye-Fi/Eye-Fi Helper.app)
        ScanSnap Manager    Application  (/Applications/ScanSnap/ScanSnap Manager.app)
        Fitbit Connect Menubar Helper    Application  (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
    Internet Plug-ins: ℹ️
        AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        NP_2020Player_WEB: Version: 5.0.94.0 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 [Click for support]
    Safari Extensions: ℹ️
        Instapaper
        Clip to DEVONthink
        Dashlane
        Evernote Web Clipper
    3rd Party Preference Panes: ℹ️
        Akamai NetSession Preferences  [Click for support]
        Flash Player  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 498.88 GB Disk used: 107.99 GB
        Destinations:
            Data [Network]
            Total size: 0 B
            Total number of backups: 0
            Oldest backup: -
            Last backup: -
            Size of backup disk: Too small
                Backup size 0 B < (Disk used 107.99 GB X 3)
    Top Processes by CPU: ℹ️
             8%    WindowServer
             7%    Activity Monitor
             5%    sysmond
             1%    backupd
             1%    Fitbit Connect Menubar Helper
    Top Processes by Memory: ℹ️
        69 MB    InterCheck
        56 MB    Safari
        43 MB    mds_stores
        39 MB    SophosScanD
        33 MB    mds
    Virtual Memory Information: ℹ️
        76 MB    Free RAM
        961 MB    Active RAM
        866 MB    Inactive RAM
        1.12 GB    Wired RAM
        51.58 GB    Page-ins
        1.83 GB    Page-outs
    Diagnostics Information: ℹ️
        Feb 15, 2015, 01:54:55 PM    /Library/Logs/DiagnosticReports/SophosSXLD_2015-02-15-135455_[redacted].cpu_res ource.diag [Click for details]
        Feb 15, 2015, 12:00:37 PM    Self test - passed
        Feb 15, 2015, 11:48:02 AM    /Library/Logs/DiagnosticReports/galileod_2015-02-15-114802_[redacted].crash
        Feb 15, 2015, 10:53:04 AM    /Library/Logs/DiagnosticReports/softwareupdated_2015-02-15-105304_[redacted].cp u_resource.diag [Click for details]

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Solid State Drive Issue on Macbook pro mid 2012 extremely slow

    I recently purchased a Corsair Force LS solid state drive and installed it on my laptop. The hard drive is extremely slow and I cant even install Yosemite on it. It's stuck at the installation screen and kept showing the remaining wait time is 12 mins. I left it over night but it's still stuck there. I thought the hard drive was defective so I returned and bought a Kingston ssd. I put it back in and have the same issue. I also bought the Hard Drive Caddy tray to replace the optical drive with the ssd. The hard drive works like charm when I swapped it with the optical drive. I was able to install Yosemite on it and works like charm. However, When I put it back to the hard drive slot. I was able to boot into Yosemite but It is extremely slow. I called apple and they said that they don't support that. It is so weird. I don't know what to do now

    I recently purchased a Corsair Force LS solid state drive and installed it on my laptop. The hard drive is extremely slow and I cant even install Yosemite on it. It's stuck at the installation screen and kept showing the remaining wait time is 12 mins. I left it over night but it's still stuck there. I thought the hard drive was defective so I returned and bought a Kingston ssd. I put it back in and have the same issue. I also bought the Hard Drive Caddy tray to replace the optical drive with the ssd. The hard drive works like charm when I swapped it with the optical drive. I was able to install Yosemite on it and works like charm. However, When I put it back to the hard drive slot. I was able to boot into Yosemite but It is extremely slow. I called apple and they said that they don't support that. It is so weird. I don't know what to do now

  • Snow Leopard Server running extremely slow all of a sudden!!

    Hi, I'm not a qualified server technician but am currently trying my best to run a server in a Secondary School! Please help, need to fix ASAP.
    So basically we've got a Mac Pro running Snow Leopard server which has become incredibly slow in the past week. Nothing has changed in our department to trigger this. Here's everything I know so far...
    - If I try to log on to the admin account when "Some Network Accounts Are Available", log on will take under a minute. If I try to log on to the admin account when the light goes green and "Network Accounts Are Available" log on will take forever and eventually just crash and which point I have to just force a shutdown and try again.
    - When I can log on, some aspects of the computing seems fast and other aspects are really slow. For example, a few programs open as soon as I log on no problem, however a simple spotlight search or trying to open Sytem Preferences will crash the computer completely.
    - Have tried booting in Safe Mode, and everything ran fast and how it's mean to but once restarting and booting normally the problems remained.
    Sorry for the lack of knowledge!!
    Thanks in advance.

    Your comment indicates "crash the computer"?  Do you mean that OS X Server itself fails, and you have to reboot?  Or that the application crashes, and you have to restart it?
    The following are some general approaches toward gathering some data:
    Launch Console.app from Applications > Utilities and see if there are blocks of repeating errors.
    Launch Terminal.app from Applications > Utilities and issue the following harmess, diagnostic command:
    sudo changeip -checkhostname
    After entering an administrative password and possibly seeing a one-time informational message about sudo, you should see some network configuration information and then an indication that no changes are required, or that there are DNS or network errors.
    Boot from the Snow Leopard installation DVD and run a volume verification pass using Disk Utility, this from the Utilities menu of the installation disl.
    FWIW...
    If the applications or OS X Server are crashing, then you're generally heard toward either a reinstallation of the software, or a hardware repair, or quite possibly a combination of the two.
    Forcing a hard shutdown can lead to corruptions, depending on exactly what's going on when the power drops out; that's probably best left as a last-resort approach and one best avoided.

  • Mac OS X 10.4.11 Server gets extremely slow - virtual memory huge.

    Hi there,
    we use a XServe G5 with Mac OS X Server 10.4.11 installed for Directory and File Services. Since 2004 the server worked without any problems. But now it gets really slow sometimes. Using the keyboard connected directly to the XServe it is even hard to reboot it. We found out after trying to locate the error that the virtual memory is about 24 GB. That size is nearly unmanageable for that server. I don't know how the virtual memory gets that huge.
    Is there a possibility to limit the virtual memory? Any other suggestions?
    Thanks for your help!

    Hello,
    You can't increase the processor speed,  what you can increase is the drive space (Either delete old files or replace the drive for a larger one) You could also increase the memory from 2.5 GB to 4 GB which should help speed this MacBook up a little more.
    Upgrading the OS to Leopard wont make much difference on the speed of your MacBook, but it would increase the updates available. personally I would clear down files on my Hard drive, archive on USB disk anything not required. Then install more RAM were possible,
    Best of luck

  • DNS server responses extremely slow

    I set up the DNS Server running on my LAN (authoritative for a fully-owned domain), and I do believe it's correctly set up - reverse mapping works fine, no error messages in the logs or while watching tcpdump, etc. It's behind my NAT/Firewall, is set to be recursive (but I have not tweaked it to make it recursive only for the subnet). My problem is with the performance. Using this internal DNS server to provide DNS for my client machines on the LAN, internet lookups are awfully slow - perhaps five to ten seconds to bring up a major site. Leaving everything else the same on a client machine, and removing the references to the internal DNS server - thus using my ISP's DNS servers outside my LAN - the same site can by fully up in one second.
    Is this major lag in performance simply caused by the fact that the ISP's DNS server is so often caching many many more sites than I could ever request from my own LAN? Or should I be looking for something specific to hunt down perfformance problems?

    If your server is stand-alone, you can run without internal DNS.
    If OD Master, you also can run without internal DNS but config of course needs to be correct. Many people say it's best to run with internal DNS, but it's not a requirement.
    One reason to run internal DNS..
    If you connect to your server by fqdn (host.domain.com).
    Without internal DNS, the client will connect to the public IP (wan side of your router). If your router supports loopback, this will work- if it doesn't support loopback it won't work. Even if it does work, you are forcing your client-server traffic to be processed (NAT) by the router, incredibly inneficient (although a simple config for basic requirements). If you're moving big files with AFP, you don't want all traffic to go from client-router(NAT)-server-router(NAT)client. You can get around this by connecting using .local or IP addresses. So this all depends on your config, requirements, habits of the users, etc.
    JJ

  • Windows Server 2012 HyperV VMs becoming extremely sluggish and slow

    I have recently set up a new system for a client consisting of a single Dell T320 server with Xeon E5-2350 2.2GHz 6 core cPU and 32GB of RAM.  Windows Server 2012 Standard is installed on the bare metal, and runs only the HyperV role.  It is not
    joined to any domains.
    It hosts two VMs, one a Windows Server 2012 Standard VM containing the RDS related roles acting as remote desktop server, with 10GB RAM allocated and 3 cores.  Only 5 people use the terminal server concurrently.
    The second VM is a Windows Server 2008 R2 based primary domain controller, with 16GB of RAM allocated and 3 cores.  It runs the AD role, as well as Exchange and GFI MailEssentials 2012.  Avira is also installed on this VM.
    The problem is that the system will function properly for 3-4 days, then suddenly it goes into a state where a multitude of applications would start consuming inordinate amount of CPU time, and become very, very slow.  Almost like the hypervisor goes
    into a software emulation mode where everything runs like molasses.  This affects BOTH VMs equally.  For example, Exchange and GFI on the Windows 2008 R2 VM together consume about 25% CPU, most of it is spent in kernel CPU time.  At the same
    time, in the other Windows Server 2012 VM, svchost, Taskmgr, WMIPrvSE, LogonUI, Explorer,  sqlservr, wsmprovhost etc. will all consume a total of about 70% CPU time, this time 99% of this is user time, not kernel time.  When one user starts any application,
    be that internet explorer, firefox or TaxPrep, the CPU spikes up to 100%.  
    All while nobody is using the system, the system is idle and no mails are flowing in or out of the system.  A reboot of the VMs does not fix anything, even a reboot of the host server does not fix anything.  When I yanked out the two power supplies
    and performed a hardware diagnostic (which came back 100% OK), it booted up and the slowness was gone for 3 days, until today when it started acting up again like I described above.  
    One more thing, when the system behaves normally the sunspider javascript benchmark in IE10 takes 316ms to execute (average) on the HyperV host operating system.  When the system goes slow like this, I pause the two VMs in HyperV then run sunspider
    again, only to be greeted by an average time of 5084ms.  So this clearly does not only affect the virtual machines but the host operating system as well. My gut still tells me the hypervisor is getting messed up somehow.
    Any ideas?  This is a major problem and I have no idea what is causing it.  

    We have had the EXACT same thing happen with a Dell T320 on two separate servers. The first one was running SQL Server 2008 with nothing else funny going on. It ran fine for a month or so, then it developed this slowness issue. We finally installed SQL on
    a loaner box (without Hyper-V) and it worked fine. We brought the T320 back to our shop and tested the hell out of it with Dell's assistance and it was NTF. Took it back onsite and moved an SBS 2011 VM over to it. After a few days, it ground to a halt. CPU
    utilization was 100%. I started shedding services, killing Exchange, Sharepoint, etc. Even stripped to the essentials, the CPU was still up in the 60-70% range. 
    I put a T310 out onsite and downed the guest SBS vm. I copied the HUGE vhd over to the T310 (running Server 2008r2 with the Hyper-V role) and it ran perfectly. CPU at about 2-4%, spiking to 15% occasionally.
    We finally concocted a story that the USB controller was bad, so they replaced the motherboard (not the CPUs) and it all seems to be working OK now after we sunk at least 100 man-hours into the problem.
    Our second one is a similar setup. T320, Server 2012, Hyper-V role, SBS 2011 Standard and a couple of member servers running basic apps. No one can find any problem and everyone acts like this is something new, although my posting comes one year after Tim's
    original posting.
    MCP SBSC

  • Windows Server 2012 Storage Spaces Simple RAID 0 VERY SLOW reads, but fast writes with LSI 9207-8e SAS JBOD HBA Controller

    Has anyone else seen Windows Server 2012 Storage Spaces with a Simple RAID 0 (also happens with Mirrored RAID 1 and Parity RAID 5) virtual disk exhibiting extremely slow read speed of 5Mb/sec, yet write performance is normal at 650Mb/sec in RAID 0?
    Windows Server 2012 Standard
    Intel i7 CPU and Motherboard
    LSI 9207-8e 6Gb SAS JBOD Controller with latest firmware/BIOS and Windows driver.
    (4) Hitachi 4TB 6Gb SATA Enterprise Hard Disk Drives HUS724040ALE640
    (4) Hitachi 4TB 6Gb SATA Desktop Hard Disk Drives HDS724040ALE640
    Hitachi drives are directly connected to LSI 9207-8e using a 2-meter SAS SFF-8088 to eSATA cable to six-inch eSATA/SATA adapter.
    The Enterprise drives are on LSI's compatibility list.  The Desktop drives are not, but regardless, both drive models are affected by the problem.
    Interestingly, this entire configuration but with two SIIG eSATA 2-Port adapters instead of the LSI 9207-8e, works perfectly with both reads and writes at 670Mb/sec.
    I thought SAS was going to be a sure bet for expanding beyond the capacity of port limited eSATA adapters, but after a week of frustration and spending over $5,000.00 on drives, controllers and cabling, it's time to ask for help!
    Any similar experiences or solutions?

    Has anyone else seen Windows Server 2012 Storage Spaces with a Simple RAID 0 (also happens with Mirrored RAID 1 and Parity RAID 5) virtual disk exhibiting extremely slow read speed of 5Mb/sec, yet write performance is normal at 650Mb/sec in RAID 0?
    Windows Server 2012 Standard
    Intel i7 CPU and Motherboard
    LSI 9207-8e 6Gb SAS JBOD Controller with latest firmware/BIOS and Windows driver.
    (4) Hitachi 4TB 6Gb SATA Enterprise Hard Disk Drives HUS724040ALE640
    (4) Hitachi 4TB 6Gb SATA Desktop Hard Disk Drives HDS724040ALE640
    Hitachi drives are directly connected to LSI 9207-8e using a 2-meter SAS SFF-8088 to eSATA cable to six-inch eSATA/SATA adapter.
    The Enterprise drives are on LSI's compatibility list.  The Desktop drives are not, but regardless, both drive models are affected by the problem.
    Interestingly, this entire configuration but with two SIIG eSATA 2-Port adapters instead of the LSI 9207-8e, works perfectly with both reads and writes at 670Mb/sec.
    I thought SAS was going to be a sure bet for expanding beyond the capacity of port limited eSATA adapters, but after a week of frustration and spending over $5,000.00 on drives, controllers and cabling, it's time to ask for help!
    Any similar experiences or solutions?
    1) Yes, being slow either on reads or on writes is a quite common situation for storage spaces. See references (with some of the solutions I hope):
    http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/a58f8fce-de45-4032-a3ef-f825ee39b96e/
    http://blogs.technet.com/b/askpfeplat/archive/2012/10/10/windows-server-2012-storage-spaces-is-it-for-you-could-be.aspx
    http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/64aff15f-2e34-40c6-a873-2e0da5a355d2/
    and this one is my favorite putting a lot of light on the issue:
    http://helgeklein.com/blog/2012/03/windows-8-storage-spaces-bugs-and-design-flaws/
    2) Issues with SATA-to-SAS hardware is also very common. See:
    http://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/5d4f68b7-5fc4-4a3c-8232-a2a68bf3e6d2
    StarWind iSCSI SAN & NAS

  • Windows server 2012 R2 PXE boot is unworkable slow, I have this exact same set-up working in 2008 R2 What can I do?

    Hi there
    I'm trying to deploy a windows 7 image through Windows deployment services via PXE boot from a 2012 R2 server.
    Issue:    PXE boot is extremely slow, it takes up to more than 60 minutes for the device to download download the PXE boot
    Things I already tried to get this up and running:
    I've tried to change the TFTP block size via command prompt and via regedit
    I've changed the settings on the tab of the WDS role (go to WDS role -> properties on server -> Tab "tftp")
    Both actions resulted in PXE boot being even slower than it already was.
    To make sure this is not because of our environment I’ve set up the same configuration on a windows server 2008 R2, here PXE boot image is downloaded to the machine within 3 minutes.
    Both servers are set up through Hyper-V this is the configuration:
    2008 R2:
    Memory: 4096 MB
    1 Virtual processor
    IDE controller 2 hard drives
    Network adapter
    2012 R2:
    Memory: 4096 MB
    32 virtual processors
    SCSI controller 2 hard drives
    Network adapter
    I can’t imagine that PXE boot is not working because of the differences of the Hard drives controllers or because of the amount of the virtual processors.
    Windows server 2012 R2 seems to handle PXE boot TFTP differently in comparison to 2008 R2.
    Do you guys know what I can do/try to get this working?

    Hi Jacques Rodrigues,
    You can run Windows Deployment Services on Hyper-V virtual machines,
    that the performance will often be degraded, particularly during the Trivial File Transfer Protocol (TFTP) download phase. This phase is very resource-intensive and may
    fail if insufficient resources are available on your server running Hyper-V.
    If you are using multicast, Check if IGMP Snooping is enabled i.e. Routers that support multicasting. In particular, Internet Group Membership Protocol (IGMP) snooping should
    be enabled on all devices. This will cause your network hardware to forward multicast packets only to those devices that are requesting data. If IGMP snooping is turned off, multicast packets are treated as broadcast packets, and will be sent to every device
    in the subnet.
    The related KB:
    Windows Deployment Services Overview
    http://technet.microsoft.com/en-us/library/hh831764.aspx
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for