Server based Office 2013 - where do I save word templates on the server for all users to access from "New"?
Wonder if anyone can point me in the right direction. I'm used to working with stand alone desktop MS Office products.
We have a server connected to six desktop work stations. All stations have access to Microsoft Office 2013 on the server, and the printer is linked through
the server.
Users are currently accessing Word doc Documents on the shared (p) drive as templates, and then saving them with relevant file names to their area on the
(p).
Surely there is a way to save Word templates to the server, so that when someone clicks on "New" in Word our own templates are also offered automatically?
Thanks
Mark
If
anyone knows the address
for where Microsoft stores the main default templates - then that would
be really useful? It would also allow us to get rid of the numerous templates that we would never use.
Thanks :)
Similar Messages
-
Citrix Xenapp 5 and Windows server 2003 environment. We want to force Firefox to kiosk mode with a pre-set homepage for all users. I also want to lock this to only one website. I have managed to set up the kiosk mode with R-Kiosk addon and Mozilla.cfg file. I am trying to use BlockSites to block all internet sites and only allow the one site with the whitelist option. I can get the addon to install for all users, but can’t get the default settings across. I have tried to add this with the Mozilla.cfg file, but it looks like this addon is getting it’s settings from the profile folder. If I set the preferences for the addon in Mozilla,cfg file, it actually picks it up but it doesn’t apply it to the addon for some reason. Does anyone have any other ideas on how I can lock this down to the one site?
I am not entirely sure how to do this, but the enterprise community would be a good place to ask. They have a email group you can ask on this page: [https://www.mozilla.org/en-US/firefox/organizations/faq/]
-
Hi All,
I am looking at an Technical solution for Restricting the direct access some specific tables in my data base to all the users(Except admins and few Service accounts). However views created on top of these tables would be exposed to all Users.
Could any one help me with the best solution.
Thanks in advance,
Regards,
Raja SuriHello,
You can try to create a new role "Client_User" in the database and deny access to the new role on the specify tables. And then add all user which you want to restricting the direct access the specific tables to the database role.
For example:
Use Database
CREATE ROLE [Client_User] AUTHORIZATION db_securityadmin;
DENY SELECT ON OBJECT::schema.table TO [Client_User] ;
EXEC sp_addrolemember 'Client_User', 'username';
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Report all activations of Office 365 ProPlus for all users
Hello:
I know that I can open my Office 365 Settings, Software, and see how many devices I have activated Office 365 Pro-plus on.
What I am looking for is a way for an Admin to run a Powershell script (or command) to retrieve the activations for ALL users in a tenant.
Thanks
TimHi Tim,
As far as I know, this is not possible. We can use Get-msoluser command to get the license status. But we can’t get details of all users’ activated computer name list for the Office 365 tenant with a Powershell script.
By the way, this forum focuses on questions and feedback for Microsoft Office Client. There is not so much about Office 365
console/hosted/cloud aspects here. For your case, I would suggest you to post in the forum of Office 365 Community, where you can get more experienced responses:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
CP3525dn, networked -- default duplex for all users (embedded web server)
I want to set the default for all users on our networked CP3525dn to be duplex. I cannot find this option anywhere in the embedded web server. I have duplex turned on, of course, and users can set their own default to duplex, but I want it to be default for everyone--the default default, if you will.
Is this possible? I'm fairly certain it's possible if the printer is connected to a computer and shared on the network (but I don't remember the specifics) but I can't find out how to do it if it's on the network on its own.
Thanks!I don't believe you can. It must be set for every user manually.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Hi,
Is there a way to do "save for all users" automatically after export/import from the repository (macro maybe)?
Thanks,
HubertHi Hubert,
Following information might help you resolve your query.
The functionality you want has been already raised as an enhancement request.
Unforunately we can save the report for all users through macros Automatically.
ADAPT ID: ADAPT01161459
Synopsis: Report should get saved for all users without checking the option u201CSave for all usersu201D.
Regards,
Sarbhjeet Kaur -
Adding printers to Terminal Server 2008 for all users
Hi! I'm trying to add a printer to a terminal server for all users that log in. I've been reading around and this seems like a working solution:
Rundll32 printui.dll,PrintUIEntry /ga /c\\localcomputername /n\\servername\printername
So I ran this with the proper parameters. Nothing shows up in Devices and Printers with the name I specified. I rebooted the server, still nothing. I re-run the command above and it tells me there's already a printer defined with that name.
I look at Devices and Printers and the name I specified still isn't there. Why doesn't the above command work like it's supposed to?
Thanks!Thanks, yes, that was the first command I tried (without the /c). All subsequent attempts tell me the printer already exists yet it definitely does not show up under Devices and Printers. I ran the above logged in as Administrator with an elevated
command prompt. The printer can't be seen from this login or a 'normal' user login. -
This is for Server based Office 2013 - using Word
All computer work stations are running Windows 7 professional
I have Word 97 - 2003 templates saved on the shared drive on the server. I have these templates "pinned" to the opening page on all server user accounts, so when anyone starts word on the server anyone can see the company templates.
On most of the work stations, when I create a new document from one of my templates - Word successfully shows all the Header and Footer details.
But on one work station there is no content in the Header or Footer, no matter which server account is signed into the server on that workstation.
Any suggestion... ... no matter which server account is signed into the server on that workstation.
Any suggestion
Do you mean it happens regardless of which acount signed in? If so, maybe update the workstation? -
Office 2013: where the heck are the security updates hiding?
I built a deployment for Office 2013 yesterday. The source files were downloaded from Microsoft, with SP1 integrated. This is *not* a "Click to Run" deployment. I used the Office Customization Tool to make a few changes (we're
not using OneDrive, so that piece isn't getting installed. I disabled the "First Run" and Customer Experience stuff, and disabled RSS Feeds and SharePoint integration. And I put in our volume license key. Overall it's a pretty vanilla
build.)
I wanted to include all available security updates since SP1 has been released, and stick them into the "Updates" folder of my deployment. So after I installed Office 2013 x64 on my Windows 7 x64 system (the base package that I built installs
just fine), I went to Windows Update to see what was available. There is nothing there. I rebooted, and tried again. Still nothing. If I go into one of the Office 2013 apps, and go to File -> Account, I do *not* have any "Update"
buttons or options.
If I go to Windows Update in my Control Panel, and click "Change Settings", I have two things checked. "Give me recommended updates the same way I receive important updates", and "Allow all users to install updates on this
computer." There are no other options to look for alternative Microsoft products, or at least no options that I can find. This is Windows 7 x64 SP1, fully patched.
I know that there have been security updates released for Office 2013 since SP1 came out in February 2014. I manually downloaded a security patch for Lync 2013, and installed that MSP onto this test system with no
issues. So there are applicable security updates out there. So why in the world can't I find the updates through the normal mechanisms? Ideally, we'd want for end users to be able to install security updates manually in an
emergency, but either I'm missing something, or that is not possible in Office 2013. Hopefully distributing Office 2013 updates through SCCM will work, but from what I'm seeing so far, I'm not sure the machines will be "detected" as having
Office 2013, because right now it can't even scan itself against Windows Update for that product.
Thanks for any input...I'm quite baffled at how the update routine is supposed to be functioning in Office 2013. I think the missing link is why I can't choose to search for "other" Microsoft products from the Windows Update panel.
The option/checkbox is totally gone.Hi,
By default Windows Update only updates Windows itself. To get updates for Office and for any other Microsoft products as well, you will need to upgrade your Windows Update to Microsoft Update.
On Windows Update panel, click "Find out more" link to install Microsoft Update.
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support -
New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,switch channel from auto to maybe 6,channel width to 20mhz? Already changed security settings to WPA2. Currently router is running in mixed b and g mode.
If you have one computer running on G they will all run on G. All ROUTERS are backward compatible, in otherwords if you have a group of computers and all of them are N compatible and one or two are G They will all work but the N computers will run at N and those that are G will run at G speed not N.
It can get confusing but really it is simple. The newest is 802.11 AC and ic used with the newest Mac Computers made available in November 2013. So if you have the newest Airport Extreme that is 802.11ac and the newest computers that are AC compliant your speed will be 5 times faster than anything on the market right now. -
I have a set of Citrix servers, we need to upgrade the FireFox on them to 29.0.1
When I have done this, and a user runs FireFox, now the users are being presented with a pop-up "Checking Compatibility of Add-ons" which delays the start of FireFox.
I need to prevent this so users just see FireFox start up without any delays.
I have installed the add-on that re-enables extensions.checkCompatibility and tried various ways of implementing it like pref("extensions.checkCompatibility", false);
However we seem to have a situation where the add-on that enables the setting is not loaded yet so the setting is not implemented.
How do I solve this for all users?You can try to set the browser.startup.homepage_override.mstone pref to ignore on the about:config
*http://kb.mozillazine.org/browser.startup.homepage_override.mstone
You can use a mozilla.cfg file in the Firefox program folder to specify new (default) values and possibly lock prefs.
Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
See:
*http://kb.mozillazine.org/Locking_preferences
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/
*http://mike.kaply.com/2014/01/08/can-firefox-do-this/ -
NPS: Event 6274 - Network Policy Server discarded the request for a user
Intermittently I will get desktop (wired) and laptop (wireless) computers experiencing issues with NPS (they drop off the network).
Some computers are affected more than others, although they are identical hardware and based on a standard image.
In the event log of the NPS servers I can see the following messages:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2/05/2014 8:47:58 a.m.
Event ID: 6274
Task Category: Network Policy Server
Level: Information
Keywords: Audit Failure
User: N/A
Computer: NT147.domain.local
Description:
Network Policy Server discarded the request for a user.Contact the Network Policy Server administrator for more information.User:
Security ID: NULL SID
Account Name: host/DPC0387.domain.local
Account Domain: DOMAIN
Fully Qualified Account Name: DOMAIN\DPC0387$Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 3c-xx-xx-xx-xx-xx
Calling Station Identifier: 00-xx-xx-xx-xx-xxNAS:
NAS IPv4 Address: 10.nnn.nnn.nnn
NAS IPv6 Address: -
NAS Identifier: ND246
NAS Port-Type: Ethernet
NAS Port: 71RADIUS Client:
Client Friendly Name: Network Device Management Subnet
Client IP Address: 10.nnn.nnn.nnnAuthentication Details:
Connection Request Policy Name: NAP 802.1X (Wired)
Network Policy Name: -
Authentication Provider: Windows
Authentication Server: NT147.domain.local
Authentication Type: -
EAP Type: -
Account Session Identifier: 384F322E317838316564303034313030306230666632
Reason Code: 1
Reason: An internal error occurred. Check the system event log for additional information.
How do I debug when an internal error occurs but there is nothing in the system event log? Where else can I look?
Here's the packet trace that matches the event log entry above:
No. Time Source Destination Protocol Length Time from request Info
1 0.000000 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
2 2.470423 Universa_xx:xx:xx Nearest EAPOL 60 Start
3 2.472870 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
4 2.539416 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
5 2.544206 Universa_xx:xx:xx Nearest EAPOL 60 Start
6 2.548804 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
7 2.550050 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
8 2.552597 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=249, l=208)
9 2.556043 10.NPS_Server 10.switch RADIUS 136 0.003446000 Access-Challenge(11) (id=249, l=90)
10 2.565876 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
11 2.569472 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=250, l=208)
12 2.572566 10.NPS_Server 10.switch RADIUS 136 0.003094000 Access-Challenge(11) (id=250, l=90)
13 2.580254 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
14 2.586544 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
15 4.564841 Universa_xx:xx:xx Nearest EAPOL 60 Start
16 4.568530 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
17 4.569876 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
18 4.582263 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=252, l=208)
19 4.586006 10.NPS_Server 10.switch RADIUS 136 0.003743000 Access-Challenge(11) (id=252, l=90)
20 4.591896 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
21 4.592692 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
22 4.599634 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=253, l=315)
23 4.600887 10.NPS_Server 10.switch IPv4 1518 Fragmented IP protocol (proto=UDP 17, off=0, ID=07db)
24 4.609920 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 1514 Server Hello, Certificate, Certificate Request, Server Hello Done
25 4.610516 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
26 4.617407 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=254, l=216)
27 4.618352 10.NPS_Server 10.switch RADIUS 288 0.000945000 Access-Challenge(11) (id=254, l=242)
28 4.623650 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 176 Server Hello, Certificate, Certificate Request, Server Hello Done
29 4.643316 Universa_xx:xx:xx Nearest TLSv1 361 Certificate, Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
30 4.649607 10.switch 10.NPS_Server RADIUS 601 Access-Request(1) (id=255, l=555)
31 4.656950 10.NPS_Server 10.switch RADIUS 199 0.007343000 Access-Challenge(11) (id=255, l=153)
32 4.662734 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 87 Change Cipher Spec, Encrypted Handshake Message
33 4.681106 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
34 4.788536 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=2, l=216)
35 4.789735 10.NPS_Server 10.switch RADIUS 173 0.001199000 Access-Challenge(11) (id=2, l=127)
36 4.795723 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 61 Application Data
37 4.796372 Universa_xx:xx:xx Nearest TLSv1 93 Application Data
38 4.802368 10.switch 10.NPS_Server RADIUS 331 Access-Request(1) (id=3, l=285)
39 4.803363 10.NPS_Server 10.switch RADIUS 189 0.000995000 Access-Challenge(11) (id=3, l=143)
40 4.808905 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
41 4.809501 Universa_xx:xx:xx Nearest TLSv1 77 Application Data
42 4.817342 10.switch 10.NPS_Server RADIUS 315 Access-Request(1) (id=4, l=269)
43 4.822986 10.NPS_Server 10.switch RADIUS 189 0.005644000 Access-Challenge(11) (id=4, l=143)
44 4.828973 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
45 4.833318 Universa_xx:xx:xx Nearest TLSv1 829 Application Data
46 4.840610 10.switch 10.NPS_Server RADIUS 1073 Access-Request(1) (id=5, l=1027)
47 4.845946 10.NPS_Server 10.switch RADIUS 189 0.005336000 Access-Challenge(11) (id=5, l=143)
48 4.850938 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
49 4.907924 Universa_xx:xx:xx Nearest TLSv1 141 Application Data
50 4.913390 10.switch 10.NPS_Server RADIUS 379 Access-Request(1) (id=6, l=333)
51 4.917535 10.NPS_Server 10.switch RADIUS 221 0.004145000 Access-Challenge(11) (id=6, l=175)
52 4.922877 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 109 Application Data
53 4.923472 Universa_xx:xx:xx Nearest TLSv1 61 Application Data
54 4.930319 10.switch 10.NPS_Server RADIUS 299 Access-Request(1) (id=7, l=253)
55 4.937348 10.NPS_Server 10.switch RADIUS 381 0.007029000 Access-Challenge(11) (id=7, l=335)
56 4.942543 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 269 Application Data
57 4.944791 Universa_xx:xx:xx Nearest TLSv1 125 Application Data
58 4.951408 10.switch 10.NPS_Server RADIUS 363 Access-Request(1) (id=8, l=317)
59 4.954022 10.NPS_Server 10.switch RADIUS 355 0.002614000 Access-Accept(2) (id=8, l=309)
60 4.981482 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Success
61 32.590347 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
62 62.592420 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
63 92.595043 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
64 122.597856 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
65 152.600618 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)A belated thanks for your reply.
Our environment doesn't have NPS accounting configured so that was easy to rule out.
The mid-day drop outs have stopped after I added "set protocols dot1x authenticator no-mac-table-binding" to our Juniper switches (which prevents mac address aging from clearing the active dot1x client session).
I believe the above error message occurs because the RADIUS session ID is rejected / ignored because of some quirks in the RADIUS standard. At the start of a dot1x authentication request a RADIUS session ID is created. For whatever reason the
RADIUS/NAP server stops responding and the Juniper switch fails over to the backup RADIUS/NAP server configured. The session ID is kept (per RADIUS standard) but the backup RADIUS/NAP server doesn't know about the session, so this event: "Network
Policy Server discarded the request for a user." occurs.
It would be nice to see a clearer error message "Invalid RADIUS session" or similar.
There is a Microsoft guide on how to set up RADIUS/NAP servers in a highly available configuration - something to do with RADIUS proxy servers.
It would be even nicer to see some kind of RADIUS session synchronisation between NAP servers... if it doesn't already exist?
I am having the same exact issue you posted on here except I have Extreme Network switches. Some of my computers, various hardware, will randomly not authenticate during re-authentication. The switch says that it failed to contact the NPS server so then it
switches to my backup server. The client has a random time on how long it waits to authenticate so sometimes I end up having the disable/re-enable the port they are connected to so that the session is started again. I see that you basically removed the option
to force clients to re-authenticate Any downfall disabling that?. Any idea why the NPS server is no longer responding? Are you using Windows Server 2012? -
Reporting Services through ISA server for All Authenticated Users
Hello colleagues.
I have MS SQL 2012 server with Reporting Services and it work via link:
https://reports2.domain.com/reports
In LAN all work fine, but I want publish this resource via ISA for All Authenticated Users.
When in publish rule I configure (in Condition) "All users" - all work fine, but when I configure "All Authenticated Users" - I have trouble on web form on
https://reports2.domain.com/reports/Pages/Report.aspx?ItemPat... - scripts not work, because it run how "anonymous" (I see on ISA logging) and ISA block scripts.
I can't use "All Users", because it's not secure.
Maybe somebody publish Reporting Services through ISA server for All Authenticated Users?
OR maybe - how on Reporting Services configure Negotiate authenticated for scripts?Hi Alexander,
All users or applications who request access to report server content or operations must be authenticated using the authentication type configured on the report server before access is allowed. The AuthenticationType named RSWindowsNegotiate is supported
by Reporting Services. To configure Windows Authentication on the Report Server, please see:
http://msdn.microsoft.com/en-us/library/cc281253(v=sql.110).aspx
Besides, we can publish report server via ISA server. Please note that you should use a new web port number with a new listener which shouldn’t be used by other web site for report server. Reference:
http://social.technet.microsoft.com/Forums/forefront/en-US/1cc68996-1ce6-4d88-a30d-2bfd13fba06e/how-to-publish-ssrs-2008-through-isa-2006?forum=Forefrontedgegeneral
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Katherine thanks for answer.
Report Server service started as Domain account.
I have in RSReportServer.config this:
<Authentication>
<AuthenticationTypes>
<RSWindowsNegotiate />
</AuthenticationTypes>
<RSWindowsExtendedProtectionLevel>Allow</RSWindowsExtendedProtectionLevel>
<RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
<EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
In web.config I have this:
<authentication mode="Windows" />
<identity impersonate="true" />
I can go (from Internet through ISA) to
https://reports2.domain.com/reports and LogOn Authentication is work, but scripts not work, because it run how "anonymous" (I see this on ISA logging) and ISA block scripts.
Do you know where in Reporting Services configure run scripts with Negotiate authentication? -
Enable save for all users in rich client document defaultly for all users
Hi,
Is there a option to enable save for all users in a rich client document defaultly for all users across the company. As the users who are creating reports are forgetting to check the box before sending the rich client document to others. Kindly let me know if you have any suggestions on this.
Thanks,
KarthikI'd suggest that is is where your BO folder structure comes in. You can export from Rich Client to any folder that you have permissions to access - some sort of collaboration folder system would potentially be better and more secure than sending unsecured reports via email. If your IT security team found out that you were removing document security, I doubt they'd be impressed!
You can't do the default save for all users, simple as that (it's bad practice anyway, which is probably why you can't). While it's not the answer that you want to hear, it is the correct one. -
Save for all users not working
I created a query in the rich client and selected "save for all users", but still cannot open it on another server. Has anyone else experienced this? I am on version 12.3.1 build 684.
I just did a Save As and checked the "Save for all users" box. I think I have to check "Remove document security", but that's grayed out); Deski only had the one option and it worked fine. There error I received is:
The document has been secured on another cluster. You cannot open this document on the current cluster. To open it, log on the right cluster and save it as unsecured. If the cluster is not reachable, try to connect to the following system : '<server>'. If this system is not reachable or not online, try the previous offline session with the connection ''. (WIS 30910)
Maybe you are looking for
-
I was about to burn an iMovie in iDVD when I got an error message saying: "Burning this movie to DVD will require approximately 3.02 GB of disk space, which is less than you have right now. If you proceed, the burn in iDVD may fail. Either save the i
-
I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.
-
Friends i have table and i have created a sequence on basis of that table. For 1st page i have created an html region and made few items there and a save button. I am filling data to the fields in page 1 and clicking the save button. In save button i
-
Can a report parameter set the Database server name
I know what my databases and tables are named, and that the connection will be an OLE DB connection to Microsoft SQL Server. However, I don't know the names of the servers on which databases will be installed. Would it be possbile to prompt for the
-
Change title of "send message" inside chain
Hi, inside a chain (rspc) I created a message notification. Now if I try to change the message title (maintain message -> edit document -> title. ) I can't save it. why? Is there a table where I can modify these message titles? Thanks