Server Behavior Login Permissions

Hi,
I have set-up up a database based upon username, password and
security access level, the access level contains 3 types of groups.
group 1, group 2 and group 3.
I've used the dreamweaver login user server behavior. Looking
at this it only allows you to go to one succeed page.
Because i have got three user access levels, i'm looking for
it to send each set of users from each access level to three
different succeed pages.
In other words, group 1 is sent to one succeed page, group 2
is sent to a different and group 3 to another.
Is there away of doing this?

GD WebDev wrote:
> Hi,
>
> I have set-up up a database based upon username,
password and security access
> level, the access level contains 3 types of groups.
group 1, group 2 and group
> 3.
>
> I've used the dreamweaver login user server behavior.
Looking at this it only
> allows you to go to one succeed page.
> Because i have got three user access levels, i'm looking
for it to send each
> set of users from each access level to three different
succeed pages.
> In other words, group 1 is sent to one succeed page,
group 2 is sent to a
> different and group 3 to another.
>
> Is there away of doing this?
>
You could do a redirect on the page that they do land on once
succeeded.
My personal preference would be to make one page, and only
show the user
groups parts of the page that they are allowed to see.
Steve

Similar Messages

Creating Login Pages - Server Behavior Issues

Hello,
I been trying to find a solution to this problem for this
past week.
I'm having issues with creating a login page. First, I get
the page created with a username text box, password text box, save
username checkbox, etc. Next, I add the server behavior for 'User
Auth' - 'Login User'. Now..here's the problem. When I complete
that, I get this error (SEE BELOW). Somehow the server behavior
duplicates. I can't go on until I make one of them unique from the
other. I tried every which way to delete it, but I can't. Any
suggestions?
SERVER BEHAVIOR ERROR
"The server behavior panel cannot determine whether "Log In
User" or "Log In User" is applied to your page. Please select Edit
Server Behaviors and change one of the 2 behaviors to ensure that
each is uniquely identifiable."
NOTE: By using the "-" sign above the panel, I can't remove
the duplicate.
Also, when I create a login page, I do need to insert a form
first("form1") and then place the username, password, checkbox
inside that "form1" form I just created, correct?
Thanks for all your help!
Craig

GD WebDev wrote:
> Hi,
>
> I have set-up up a database based upon username,
password and security access
> level, the access level contains 3 types of groups.
group 1, group 2 and group
> 3.
>
> I've used the dreamweaver login user server behavior.
Looking at this it only
> allows you to go to one succeed page.
> Because i have got three user access levels, i'm looking
for it to send each
> set of users from each access level to three different
succeed pages.
> In other words, group 1 is sent to one succeed page,
group 2 is sent to a
> different and group 3 to another.
>
> Is there away of doing this?
>
You could do a redirect on the page that they do land on once
succeeded.
My personal preference would be to make one page, and only
show the user
groups parts of the page that they are allowed to see.
Steve

Login runtime value from login server behavior?

How do I set up a recordset that will point to the login users' record in PHP once they login from the login server behavior?
In ASP I used the value for the variable actname: MM_Username.
I just want to link to the username's record. I thought the "mm_Username" value was something that was created in the login server behavior that came with Dreamweaver and it would work for php as well as asp.
In PHP I am using the following runtime value language :
$_GET['MM_Username']
Is it different in PHP? It won't point to the record of the login user in the user's account.
How do I set up a recordset so that it will point to the record of the login user if none of this makes sense in php.
Thanks in advance,
Bob Jean

Found the Answer. The runtime value in the recordset is as follows:
$_SESSION['MM_Username']

Login Server behavior problem

Hello,
I'm trying to have a couple of pages with restricted access
on our website.
Using DWMX2004 and Coldfusion on Windows XP.
I used the login server behavior to achieve this.
It seems to work fine when the user name (email address in
this case) and password are not in the database, redirecting to the
failed login page, but when the user and password are correct I get
an error message ("Variable MM_LOGINACTION is undefined") and the
redirection doesn't happen.
I'm far from an expert, and I'm struggling to understand the
code, especially the reason why a CGI variable is used...
Could anyone please help me ?
Thanks in advance.
Ann
Here is the code of my login page (which is not in the root
directory, but in a folder ../en/):
<cfif IsDefined("FORM.txtEmail")>
<cfset
MM_redirectLoginSuccess="brochures_download.cfm">
<cfset MM_redirectLoginFailed="brochures_new.cfm">
<cfquery name="MM_rsUser" datasource="Calliope">
SELECT UserEmail,UserPass FROM tblUsers WHERE
UserEmail='#FORM.txtEmail#' AND UserPass='#FORM.txtPass#'
</cfquery>
<cfif MM_rsUser.RecordCount NEQ 0>
<cftry>
<cflock scope="Session" timeout="30" type="Exclusive">
<cfset Session.MM_Username=FORM.txtEmail>
<cfset Session.MM_UserAuthorization="">
</cflock>
<cfif IsDefined("URL.accessdenied") AND false>
<cfset MM_redirectLoginSuccess=URL.accessdenied>
</cfif>
<cflocation url="#MM_redirectLoginSuccess#"
addtoken="no">
<cfcatch type="Lock">

</cfcatch>
</cftry>
<cfelse>
<cflocation url="#MM_redirectLoginFailed#"
addtoken="no">
</cfif>
<cfelse>
<cfset MM_LoginAction=CGI.SCRIPT_NAME>
<cfif CGI.QUERY_STRING NEQ "">
<cfset MM_LoginAction=MM_LoginAction & "?" &
XMLFormat(CGI.QUERY_STRING)>
</cfif>
</cfif>
<html>
<head>
</head>
<body>
<form
ACTION="<cfoutput>#MM_loginAction#</cfoutput>"
METHOD="POST" name="FORM">
<table width="100%" cellpadding="2" cellspacing="2">
<tr>
<td>Your email </td>
<td><input name="txtEmail" type="text"
id="txtEmail" size="65"></td>
</tr>
<tr>
<td>Password</td>
<td><input name="txtPass" type="text" id="txtPass"
size="8"></td>
</tr>
<tr>
<td> </td>
<td><input name="Login" type="submit" id="Login"
value="Login"></td>
<td> </td>
</tr>
</table>
</form>
</body>
</html>

You need to ensure that sessions have been enabled in your
application.cfm
file.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"kangy" <[email protected]> wrote in message
news:[email protected]...
> Hello,
>
> I'm trying to have a couple of pages with restricted
access on our
> website.
> Using DWMX2004 and Coldfusion on Windows XP.
>
> I used the login server behavior to achieve this.
> It seems to work fine when the user name (email address
in this case) and
> password are not in the database, redirecting to the
failed login page,
> but
> when the user and password are correct I get an error
message ("Variable
> MM_LOGINACTION is undefined") and the redirection
doesn't happen.
>
> I'm far from an expert, and I'm struggling to understand
the code,
> especially
> the reason why a CGI variable is used...
> Could anyone please help me ?
> Thanks in advance.
> Ann
>
> Here is the code of my login page (which is not in the
root directory, but
> in
> a folder ../en/):
>
> <cfif IsDefined("FORM.txtEmail")>
> <cfset
MM_redirectLoginSuccess="brochures_download.cfm">
> <cfset MM_redirectLoginFailed="brochures_new.cfm">
> <cfquery name="MM_rsUser" datasource="Calliope">
> SELECT UserEmail,UserPass FROM tblUsers WHERE
> UserEmail='#FORM.txtEmail#'
> AND UserPass='#FORM.txtPass#'
> </cfquery>
> <cfif MM_rsUser.RecordCount NEQ 0>
> <cftry>
> <cflock scope="Session" timeout="30"
type="Exclusive">
> <cfset Session.MM_Username=FORM.txtEmail>
> <cfset Session.MM_UserAuthorization="">
> </cflock>
> <cfif IsDefined("URL.accessdenied") AND false>
> <cfset MM_redirectLoginSuccess=URL.accessdenied>
> </cfif>
> <cflocation url="#MM_redirectLoginSuccess#"
addtoken="no">
> <cfcatch type="Lock">
> 
> </cfcatch>
> </cftry>
> <cfelse>
> <cflocation url="#MM_redirectLoginFailed#"
addtoken="no">
> </cfif>
> <cfelse>
> <cfset MM_LoginAction=CGI.SCRIPT_NAME>
> <cfif CGI.QUERY_STRING NEQ "">
> <cfset MM_LoginAction=MM_LoginAction & "?" &
> XMLFormat(CGI.QUERY_STRING)>
> </cfif>
> </cfif>
> <html>
> <head>
> ...
> </head>
>
> <body>
> ....
> <form
ACTION="<cfoutput>#MM_loginAction#</cfoutput>"
METHOD="POST"
> name="FORM">
> <table width="100%" cellpadding="2"
cellspacing="2">
> <tr>
> <td>Your email </td>
> <td><input name="txtEmail" type="text"
id="txtEmail"
> size="65"></td>
> </tr>
> <tr>
> <td>Password</td>
> <td><input name="txtPass" type="text"
id="txtPass"
> size="8"></td>
> </tr>
> <tr>
> <td> </td>
> <td><input name="Login" type="submit"
id="Login"
> value="Login"></td>
> <td> </td>
> </tr>
> </table>
>
> </form>
> ...
> </body>
> </html>
>
>
>

Server Side Includes with Server Behaviors

Is it possible to include pages that have server behaviors attached to them, or are these behaviors limited to pulling in just plain html from the included pages?
For example, I want two pages, index.php and login.php.
I want the login.php page to have all of the user login behaviors/links/fields/buttons/etc. and then Include that on the index.php page. Am I supposed to be able to do this using ADDT server side includes?
I've been successful using server side includes to include static text on a page, but not dynamic content with behaviors attached. I'm not sure if I'm just have a mistake, or if this won't work in the first place.
thanks!

Hi,
this is generally possible, as the included files sure can have their own server hehaviours -- did that several times, where the "container" page had about no server behaviours embedded, but the included file did.
ADDT´s server side includes will, loosely said, basically just "dynamically" strip the included document´s "head", but leave other components like server behaviours untouched
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Cannot Edit Duplicate Server Behaviors (bugged?)

Okay, here's a problem:
I've got a user login page with two different forms on it -
one to log in new users, and one to log in existing users. I
applied a "log in user" server behavior to each of them. Now both
of these server behaviors are showing up under the Server Behaviors
menu with the exact same name: "Log In User". When I try to save
this file I get the following error:
The Server Behavior panel cannot determine whether "Log In
User" or "Log In User" is applied to your page. Please select the
Edit Server Behaviors and change one of the two behaviors to ensure
that each is uniquely identifiable.
Clicking on each of them points to the same block of code
(which logs in the existing user). I cannot delete them using the
minus sign. When I click on the plus sign and select "Edit Server
Behaviors" it shows me two other custom behaviors that I'd already
downloaded (and used on another page) but doesn't show me the "Log
In User" behavior at all.
Is there any way to edit these behaviors? Change the name of
one of them? Right now my page is working perfectly and I wouldn't
mind the error except for the fact that this page is based on a
template. Any template changes I make are not updating to this
page. . . perhaps there's a preference I could change that would
allow template changes even if an error is encountered?
Any help is appreciated. Thanks in advance!

Sylvain; thank you for the reply. No, this issue impacts entries other than automount as well.
So far I have observed this with entries consisting of :
1) top/posixaccount/organizationalPerson/person/inetOrgPerson,
2) top/groupofuniquenames/posixgroup
3) top/iphost/nsHost
4) top/nisNetgroup
I have double/triple checked the schema and any log files as well to no avail.
I have opened SR 3-10281206831 related to this issue.

ADDT file upload server behavior / file ownership on server

When using the ADDT file upload server behavior, I found out that the files stored on my server have the ownership "www-data www-data", where other files uploaded (with Dreamweaver or a FTP client) have the ownership "[mydomain] www-data.
This means I cannot manipulate these ADDT uploaded files with a FTP client like Filezilla or in the Dreamweaver file window, because I then get an error message saying I don't have the required permission for that operation (eg delete the file).
Any clue on how to solve this problem?
Thanks in advance,
Erik

You can also check with your host if they are running suexec. If they are you can possibly use a PHP-CGI wrapper in your script to have it create files/folders with the right permissions. It's more about the ownership of the php interpreter. Surprising though as I never seen ADDT have this kind of issue. I have seen this issue several times in hand written scripts by me where I don't do a lot of pre-checking.

Restrict Access to Page Using a password.php Instead of Server Behavior

I previously used "log in" and "restrict access to page" server behaviors for my client portal when I only had one client. I had my username and password stored in mySQL database. I recently have gained more clients that all needed to be redirected to their own customized landing page when logged in. Because of this, I used a password.php to store the usernames and passwords and to redirect to different pages. Now, I am wondering how I can restrict access to these pages (i.e. someone won't be able to access the pages by typing the url) since I will not be connecting to a database anymore.

I'm also confused by your statements.
>Now, I am wondering how I can restrict access to these pages
>(i.e. someone won't be able to access the pages by typing the url)
>since I will not be connecting to a database anymore.
It doesn't matter where you store the credentials - database or php file - the techniques for restricting access will be similar. I really don't understand why you moved away from the database when you got more clients. The more data you need to manage, the more reason to store it in a database.
After logging in, most sites direct users to the same page, yet pull user specific data from the database. If for some reason you can't do this and need to built individual pages for each client, then store the 'landing' page for the client in the php file or database. Restrict access to each page by comparing the logged in name with an allowed login name. Or a more dynamic approach would be to dynamically pass the page name to a database query that validates that it's ok for the logged in user to access.
Also, these questions are more appropriate for the app dev forum.

Php form - server behavior form not there!

I figured this out....form name is different than form ID.
When I go into the server behavior in the authenticate user -
login user the form name I have labeled in the properties windows
in not showing up. It only says <unnamed>, however it is
named login_form. Any ideas? I am stumped.
I finally figured out the mysql stuff, to get stuck on this
small detail.

A.Translator wrote:
> The form on this page returns a 'form is not filled in
properly'
> response
http://www.spinsister.nl/zandbak/Rood/contact.htm
This is the line that's causing the trouble:
> $comments = $_POST['comments'] ;
Change it to this:
$comments = $_POST['opmerkingen'];
Then it should work.
David Powers
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "Foundation PHP 5 for Flash" (friends of ED)
http://foundationphp.com/

Server Behavior

Hi, someone know how I can migrate a custom server behavior
from DW8 to DW CS3?
Thanks a lot...

GD WebDev wrote:
> Hi,
>
> I have set-up up a database based upon username,
password and security access
> level, the access level contains 3 types of groups.
group 1, group 2 and group
> 3.
>
> I've used the dreamweaver login user server behavior.
Looking at this it only
> allows you to go to one succeed page.
> Because i have got three user access levels, i'm looking
for it to send each
> set of users from each access level to three different
succeed pages.
> In other words, group 1 is sent to one succeed page,
group 2 is sent to a
> different and group 3 to another.
>
> Is there away of doing this?
>
You could do a redirect on the page that they do land on once
succeeded.
My personal preference would be to make one page, and only
show the user
groups parts of the page that they are allowed to see.
Steve

Our own mysqli server behaviors

Folks, how about we work together to convert the existing Dreamweaver's server behaviors library from mysql extension support to mysqli? I have been able to convert part of it*, but we could try to convert all of it. For those who doesn't know, the source files for the PHP_MySQL behaviors in Windows 8 are at
C:\Users\YOUR_USER\AppData\Roaming\Adobe\Dreamweaver CC\pt_BR\Configuration\ServerBehaviors
What do you guys think about that?
* I used these informations: Dreamweaver troubles - ShawnReevesWiki (look for "Stale PHP/MySQL routines" section)

JORGE JR wrote:
Folks, how about we work together to convert the existing Dreamweaver's server behaviors library from mysql extension support to mysqli? I have been able to convert part of it*, but we could try to convert all of it. For those who doesn't know, the source files for the PHP_MySQL behaviors in Windows 8 are at
C:\Users\YOUR_USER\AppData\Roaming\Adobe\Dreamweaver CC\pt_BR\Configuration\ServerBehaviors
What do you guys think about that?
* I used these informations: Dreamweaver troubles - ShawnReevesWiki (look for "Stale PHP/MySQL routines" section)
It's pretty easy to write your own (look for tutorials on Google) and keep them as 'snippets' - insert, update, delete, login - DW server behaviours couldn't really do much more than that, without having to manually manipulate the code.

Server behaviors missing? Code still there

Occasionally, while working on dynamic pages, I make some
changes. After
uploading the page, I often find that the page works but when
I edit the
page, I find that parts of it are missing. The code is still
there but
the item is no longer in the "server behavior" window.
Is there an easy way to get this stuff back so that I can see
it in the
window?
This seems to happen more often these days (these days being
since
8.0.2) This is probably anecdotal but it is happening more
often.
Ideas welcome
Thanks

Its difficult to say whats patterened, as it depends on the
server behavior.
Typically you would have something like
SELECT * FROM tablename WHERE id = 1
It would look for SELECT and FROM to find the behavior, as
the rest of the
SQL statement are parameters that can be altered. This is a
very simplified
example, but you get the idea.
Changing code that can't be changed as a parameter in the
dialog boxes, or
changing the order of code will cause DW to "lose" the
behavior.
Gareth
http://www.phploginsuite.co.uk/
PHP Login Suite V2 - 34 Server Behaviors to build a complete
Login system.

Server Behaviors

I'm trying to create a dynamic drop down menu. I've been
going through a tutorial but my trouble began when I was instructed
to create a show-hide layers in the behaviors. The "+" sign wasn't
available because I had to set up the 1)site 2) document type
3)testing server so I did. I used doc type ASP. The "+" now shows,
but no option to choose show-hide layers. Where are all my
roll-over, pop-up message, play a sound, etc. options??
Then, since I'm working on Cold Fusion documents, I changed
the doc type to CF and I have to answer addition settings questions
such as RDS login & data source. I'm working via ftp but it's
only me and my little computer in the meantime.
So now can I not only get to the behaviors I need, I have no
idea how to set the settings. I've searched and searched for the
answers. P P P Pleeeeaaase help!!!!
Thanks in advance for anyones response :)

I'm not sure exactly what you're trying to build. Show-Hide
layers is a Behavior (not Server Behavior) and only requires that
you be working in an HTML document. You would have to apply a
Behavior to a particular HTML element, like a link, because it
needs an event, like onClick, to trigger the behavior. Behaviors
are Javascript scripts, which can be in plain old HTMl web pages.
A Dynamic Drop-Down menu, on the other hand, requires that
you be working with dynamic web pages, like Coldfusion or ASP, and
that you have created a Recordset from a database to populate the
drop-down box.

Server Behaviors (Newbie questions)

Hi all,
I'm new to Dreamweaver and am trying to get a basic site set
up.
I have a Linux account with MySql at Godaddy.com for the
server, and enough of the database set up to get me started.
The tutorials I have seen always stop short of a full
explanation so I don't have a good resource for information yet:\
Is it possible to add server behaviors to pages that are
based on a template?
It seems most behavior's I try to add to these forms give
something like 'cannot add code outside the <html> block,
changes will be discarded' when I try to apply them - any idea
whats going on there?
Is a good source of server behaviors? I downloaded the
Developer Toolbox and haven't had much luck with any of those tools
- are they compatable with the standard behaviors (mostly regarding
login/logout at this point)?
What do I have to do to get a logout to actually log me out?
When I click the link, it redirects me to my logged out page, but
the conditional region (if logged in, show logout, else show login)
always says logout (I think meaning the logout didn't work)?
I know I'll have a bunch more questions, but would rather
look them up until I have a real issue.
Thanks for any help!
Dan

Hi Dan:
Maybe these technote might be useful:
http://www.adobe.com/go/tn_16531
HTH
Andres Cayon
Spain Adobe Dreamweaver User Group
http://www.dwug.es
"ParDHarD" <[email protected]> escribió
en el mensaje de noticias
news:fhn4fq$h34$[email protected]..
> Hi all,
> I'm new to Dreamweaver and am trying to get a basic site
set up.
> I have a Linux account with MySql at Godaddy.com for the
server, and
> enough of
> the database set up to get me started.
> The tutorials I have seen always stop short of a full
explanation so I
> don't
> have a good resource for information yet:\
>
> Is it possible to add server behaviors to pages that are
based on a
> template?
>
> It seems most behavior's I try to add to these forms
give something like
> 'cannot add code outside the <html> block, changes
will be discarded' when
> I
> try to apply them - any idea whats going on there?
>
> Is a good source of server behaviors? I downloaded the
Developer Toolbox
> and
> haven't had much luck with any of those tools - are they
compatable with
> the
> standard behaviors (mostly regarding login/logout at
this point)?
>
> What do I have to do to get a logout to actually log me
out? When I click
> the
> link, it redirects me to my logged out page, but the
conditional region
> (if
> logged in, show logout, else show login) always says
logout (I think
> meaning
> the logout didn't work)?
>
> I know I'll have a bunch more questions, but would
rather look them up
> until I
> have a real issue.
> Thanks for any help!
>
> Dan
>

Untrusted apps are not allowed to connect to or launch Window Server before login.

I'm getting this with the Citrix Receiver uninstaller from the command line... but not on all Mountain Lion 10.8.5 systems. Googling turns up a lot of ideas about a problem with the app or in pre/post-flight scripts, but since it works on some, I wonder. What is the mechanism that generates this error? I'm guessing there's some setting or condition that exists on one system that isn't true on the other. How do I find out?
Sep 25 10:55:21 palms sudo[74325]: joliver : TTY=ttys000 ; PWD=/Users/joliver ; USER=root ; COMMAND=/Volumes/Citrix Receiver/Uninstall Citrix Receiver.app/Contents/MacOS/Uninstall Citrix Receiver --nogui
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: 3891612: (connect_and_check) Untrusted apps are not allowed to connect to or launch Window Server before login.
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorFailure: This user is not allowed access to the window system right now.
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetEventPort: Invalid connection
Sep 25 10:55:21 --- last message repeated 3 times ---
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSRegisterConnectionNotifyProc called with invalid connection
Sep 25 10:55:21 --- last message repeated 2 times ---
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetDockRect: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetCurrentDisplayMode: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetEventPort: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSSetConnectionProperty: Invalid connection
Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: Error enabling suspendResume handling

Contact Wacom. Unless they have updated drivers there is no workaround.
Update or remove Quicksilver.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Server Behavior Login Permissions

Similar Messages

Maybe you are looking for