Server busy, try later

I have been trying for a few days to publish to Iweb. My progress clock gets about about half way around when I get the message "server busy, try in a few minutes". All of my updates are current(checked that first thing). I did notice I was never asked for for my dot mac password. Other than that, I don't know what to try. This is my first attempt at publishing to Iweb, so I hought I would try a very small file to get started.
Thanks for any help

Even though iWeb complains about the server being busy, the real story probably doesn't have anything to do with the servers at all. What iWeb is most likely complaining about is some network condition that is causing delays in transmitting or confirming receipt of the data that it is trying to send.
The basic advice is to keep trying. Vary your own network conditions if you can.... if you are on a wireless network, try connecting directly to a wired ethernet connection. If you have a laptop, try connecting to a different wireless network to see if it makes any difference.
Here's a page from Apnewbie with a collection of possible things to try...
http://web.mac.com/mark8heaton/iWeb/PublishErrorsHelp

Similar Messages

  • Photo stream not working, tried to reset I get a server error try later this is the second week

    Can't reset photostream, get a server error try later? Trying for 2 weeks

    Reboot your computer.  Temporarily disable any security software, i.e. firewall, anti-virus, anti-malware, etc.

  • "add_drv/rem_drv currently busy; try later"

    I am writing a device driver for PCI card on intel /x86 p/f Solaris 8.
    I have succefully written some portion of the driver & is able to read from
    the device register.Now i had to initialize the DMA in BUS master mode residing on
    my device.For that i had called the following routines in attach(9E) entry
    point.
         1)ddi_dma_alloc_handle();
         2)di_dma_mem_alloc();
         3)di_dma_addr_bind_handle();
         I succefully complied the code.
    MY PROBLEM IS:-     
         1) when i attach my device driver to the system using add_drv -i command ,
    the system get hanged & reboots after sometime.While at booting it shows that the system hanged because of ddi_dma_alloc_handle() function.The system never boots up while the PCI device is plugged to the system.Now i remove the PCI device from the system & the system boots up perfectly.NOW I TRY TO REMOVE THE DRIVER FOR THAT PCI DEVICE:-
    using "rem_drv" command BUT SYSTEM SHOWS FOLLOWING MESSAGE:-
              "add_drv/rem_drv currently busy; try later"
              How to overcome this problem??????if anyone can help??i will be grateful to him.
    2)With what value the ddi_dma_attr(9s) structure will be initialized for PCI bus device.     
    Kindly help.
    Thanks in advance               

    Try:
    /usr/bin/rm /tmp/AdDrEm.lck
    MM

  • Cannot connect to Facetime on my iMac - message says error occured in server, please try later

    When I open Facetime, it asks me to fill in my password. Then it says an error occured in the server and I should try later... It has been going on for days.
    If anyone can help. Thank you.

    Hi!
    Im sorry for my english! Is very poor...
    I recommend you this things:
    1. Check "Time and Date" from "System Preferences" (Click the apple in the status bar, and go to it) and be sure is in automatic location everything.
    2. Check your serial number appear: Go to apple again, and click on "about this mac" and now click on "More" or "more information" (I dont know how appears in english).
    If your serial number dont appear, contact the technich support by call.
    3 Try to fix permissions:
    Go to "Disk Utility in Applications> Utilities, select your Hard Disk, and chose "Repair Disk Permissions" from the "First Aid" tab
    Now, try again:
    Open terminal, and write directly:
                   "sudo pico /private/etc/hosts"  and press INTRO key
    (Between the words "sudo" "pico" and "/" must be a space).
    Then write the password, and press again INTRO key.
    It must be appear the same window wich is in your image, but on the top, it must be "GNU Nano....File: /private/etc/hosts". Its mean that you are in this file, and not in another one.
    If it isn´t like that, its mean that the problem is another one, and I´m so sorry, but I can´t help you

  • System busy try later?

    I cannot purchase songs at the itunes web site, I enter all hte credit card info correctly but the message says they are experianceing technical difficulties and I should try again, what gives?

    How long has this been going on? Does the program quit right after it gives this message? Are you running the latest ver of iTunes?

  • Can't set up email says server unavailable try later

    Trying to set up email won't let me it is connected to wifi ect can't find problem please help

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • HELP my i-pod will not eject says it's busy try later

    I need help with this it won't eject I look up on the site and
    I haven't found anything that can help,
      Windows XP  

    I just tried this and the updated went through smoothly. But now will i have to disable macafee virus scan every time i want to update my shuffle?
    Another issue, my ipod will not turn on and the battery light indicator will not show how much battary is left. I am pretty sure that my ipod shuffle was fully charged a few days ago and I have not been able to use it becuase of this problem.

  • How to redirect to a server busy page when under heavy load

    Hello,
              I have been doing extensive load testing of a web application using Weblogic
              5.10 sp 06. I have found a point where under extremly heavy load the server
              just does not respond anymore. Fair enough.
              What I want to do is at a certain load level (before it stops responding) I
              want to redirect users to a "Server Busy - try again later" page. Is there a
              setting in weblogic that allows me to do this ? Or do I need to have other
              monitoring software to take care of this ?
              Thanks and Regards,
              Nick H
              

    Cameron Purdy <[email protected]> wrote:
              > Hi Nick,
              > Unfortunately, last I check there was no such processing. Weblogic maintains
              > a big (2^16) queue that it puts requests into and (if I remember correctly)
              > it doesn't gracefully handle overflow. I believe the architecture should
              > have been a smaller queue with the overflow condition being
              > protocol-specific (such as HTTP doing a "too busy" error).
              It is possible to create and use your own execute queue in 6.1 and specify it's
              length, so I expected this to happen when queue length reaches this number, but
              it didn't.
              > Peace,
              > --
              > Cameron Purdy
              > Tangosol, Inc.
              > http://www.tangosol.com
              > Tangosol: How Weblogic applications are customized
              > "NH" <[email protected]> wrote in message
              > news:[email protected]...
              >> Hello,
              >>
              >> I have been doing extensive load testing of a web application using
              > Weblogic
              >> 5.10 sp 06. I have found a point where under extremly heavy load the
              > server
              >> just does not respond anymore. Fair enough.
              >>
              >> What I want to do is at a certain load level (before it stops responding)
              > I
              >> want to redirect users to a "Server Busy - try again later" page. Is there
              > a
              >> setting in weblogic that allows me to do this ? Or do I need to have other
              >> monitoring software to take care of this ?
              >>
              >> Thanks and Regards,
              >>
              >> Nick H
              >>
              >>
              Dimitri
              

  • Java.rmi.ServerException: Server unavailable, please try later

    I'm testing a service proxy in JDeveloper 10.1.3.1.
    I'm using encryption and signing.
    Now that I have the encryption/signing key loading, I get the following error:
    WARNING: Subject Key ID extension not found.Using BST Referencing scheme
    java.rmi.ServerException:
    start fault message:
    Server unavailable, please try later
    :end fault message
         at oracle.j2ee.ws.client.StreamingSender._raiseFault(StreamingSender.java:560)
         at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:396)
         at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:112)
         at pkg.service.client.runtime.RequestSoap_Stub.execute(RequestSoap_Stub.java:84)
         at pkg.service.client.RequestSoapClient.execute(RequestSoapClient.java:48)
         at pkg.service.client.RequestSoapClient.main(RequestSoapClient.java:34)
    Process exited.
    Debugger disconnected from local process.
    Is this a failure of the RMI server on my side or is it a failure to connect to the service? Is the destination service sending this to me or just the transmission code?
    It looks to me from the trace and the vagueness of the message that this is from the Oracle transmission code in the StreamingSender class, not a message received from the destination webservice. Would love some confirmation, though.
    Thanks for any help.

    This error generally means there is trouble in the host file, or there is trouble with anti-virus software. Check this section of the support document that you came here from.
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors: 
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • HP Officejet Pro 8500 A910 Scan to email failure Error Server Failure Try again Later message

    HP Officejet Pro 8500 A910n  ( CM758A ) Scan to email failure  Error  Server Failure  Try again Later message
    Ran HP Print & Scan Doctor - finds no problems. When sending a scanned document to the user email it has " Error Server Failure  Try again Later " message . Can run test to the scanner without any errors.  Tried to reset the printer - same result.
    Any help would be much apreciated.  AHuber

    Hello there! Welcome to the forums @TheShadow42 ,
    I read about the scan to email issue you are having and I will gladly try to help you! I would suggest checking your scan to email settings from the EWS, and perhaps run the scan to email wizard again. You should also see a scan and test option in the setup.
    Here is a link to the User Manual, that has quite a bit of great info. Check out page 62 for the scan to email information.
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Exchange Server not responding - please try later

    Hi there
    Can anyone please help with my E75.
    I have had the phone over a year and since day 1 it has syncd perfectly well with my Outlook at work.
    Until a couple of days ago!!!
    Since then, it has refused to sync my calendar and contacts. It is still syncing e mail but about half way through the syncing process (once it has synced the e mails) I get the error message “exchange server not responding – please try later”.
    I have asked my work IT helpdesk but they have said speak to the mobile provider. They also said there’s nothing wrong with their servers but I got the feeling they hadn’t really checked.
    My problem is that I don’t know where to start.
    Is the problem to do with:-
    My phone?
    Its settings?
    Orange’s servers?
    My work’s servers?
    Nokia’s servers?
    I’m confused – please help.
    Ps I can’t believe it is my phone's settings as I haven’t changed these and it worked fine for a year. And, anyway, my credentials must be ok because it is still syncing my e mails.
    Thanks in advance
    Ian

    hi
    as i am still facing this problem also from couple of day one of my customers was complaining about yahoo messenger version 9 couldnt sign in after i make good troubleshooting i fond a massage in yahoo site and the massage is '
    Yahoo! Search Search:
    Welcome, ksatcw[Sign Out, My Account]
    • Messenger Home -
    • Help
    • Go Back to Yahoo! Messenger
    Yahoo! Messenger > Yahoo! Messenger > Messenger9 > Messenger
    Is my “Use Proxies – Enable HTTP Proxy” setting the reason why I can’t sign into the Yahoo! Messenger Beta?
    Yes. If your connection to the internet requires proxy authentication, then you won't be able to sign in with the current version of Yahoo! Messenger Beta. Instead, we recommend using Messenger version 8.1 for now. Sorry for the inconvenience! And thanks for reaching out early for the Beta. We’ll get this resolved as soon as possible.
    Email this page Print this page
    Was this article helpful?
    Yes
    No
    Contact Customer Care Click to contact Customer Care for further assistance.
    Top Questions
    • Questions about the closure of Yahoo! Messenger version 5.6?
    • Why do I need to upgrade to Yahoo! Messenger 9.0 if I have a firewall?
    • How do I install Yahoo! Messenger?
    • How do I configure my firewall/proxy server?
    Yahoo! Messenger crashes when I launch it.
    but if i disable my proxy the working fine without any problem and what i think is yahoo service the change some settings which not compatible with proxy settings or server .

  • Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

    Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

    I am publishing directly to an FTP server (option 1).  Is this the optimal method or should I be publishing to a folder and then (how do/would I?) publish to my hosting domain?
    I'm wondering if this has really anything to do with the publishing process, or whether it just has to do with the photos and/or the photo albums.  I've deleted the photo albums with the missing pictures from my site on iweb thinking a file might be corrupt. (I'm getting the albums from iphoto -- drag/drop method into iweb) I then replaced these albums with the same albums as the previous ones from iphoto and then published my site again -- and the EXACT same photos were once again missing in the NEW albums as were missing in the old albums...
    Maybe it is a publishing issue, or it could be a photo/file issue.  However, these albums aren't very large -- the largest containing 135 photos --
    Please! if you have any suggestions or ideas as to what is happening I would be greatly appreciative!
    I'm pulling my hair out here trying to diagnose the problem...

  • Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

    Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
    Any other ideas?

    Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
    <Link Edited by Host>

  • Publish error There was an error communicating with the FTP server. Try again later, or check with your service provider.

    OK! So I got everything filled out right to publish my iWeb site with iCloud now but after it looks like everything is fine this error pops up REPEATLY!:
    PUBLISH ERROR There was an error communicating with the FTP server. Try again later, or check with your service provider.
    Is this an Apple problem or with my server Netfirms???

    Yeah no sorry not the answer.  I have my own online hosting unlimited space and bandwidth.
    It seems to be linked to teh podcast image.  It's very strange...

  • Please can you help me? I have a Mac Book Pro with OS X 10.7.4 and my FaceTime doesn't open anymore. It appears this sentence:"the server detected an error during the elaboration of the registration. Please try later". What happens??

    Please can you help me? I have a Mac Book Pro with OS X 10.7.4 and my FaceTime doesn't open anymore. It appears this sentence:"the server detected an error during the elaboration of the registration. Please try later". What happens??

    Start the computer from the installation disk and perform Repair Disk and Repair Permissions using Disk Utility

Maybe you are looking for