Server Error in '/' Application upon logging into Myspace using Firefox

Hi Everybody,
I keep trying to log into myspace from both safari and firefox and everytime I get this message....
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
Anybody have a solution for this? Right about the time this started happening I have not able to send mail. Related? I feel like such a mess right now!!Ha Ha!
Any help would be appreciated!
Jared
G4 I Mac   Mac OS X (10.4.9)  

Hi again J,
You are welcome for the suggestions. Sorry, it's still a no go .
When you are done with the gym: ) I think you ought to try login into Myspace with Safari using a freshly made "test" account. This will show if this issue is system wide,
• Safari Preferences->Advanced tab, Proxies: check that those are not selected.
• Are you using a third party firewall Net Barrier, or Peer Guardian?
if you are they could be the issue, disable them do a restart & see if that helps.
• Are you using DNS #s in System prefrences-> Network,-> Show: Airport
or Ethernet which ever is the case,
TCP/IP tab DNS Servers: enter DNS #'s look for your ISP's here on this page,
http://www.portforward.com/networking/dns.htm
( I also make sure to add DNS #s in the Airport Admin Utility app, found in Utilities
Or try these
Verizon (Level3) - these are not restricted to Verizon customers
4.2.2.1
4.2.2.2
The site is working for me & other users here, so the issue seems to be with either your username account on your computer or system wide on your computer, try the test account & that should help shed a little light.
Good luck, & please keep us posted.
Eme
p.s I forgot this may help:
Under the Blue Apple ->System Preferences /Accounts/ Login Options,
Click on the padlock, enter your admin password.
use the [+] to create one, for ease you could enter test in all the fields.
The short name will be generated for you.
Log Out from your user name account via the Apple menu at top-left of your screen, log in to the Test account that you created.

Similar Messages

  • Getting 500 Internal Server Error while tryig to log into freshly upgraded

    Hi
    Getting 500 Internal Server Error while tryig to log into freshly R12 upgraded.
    Below is the application.log messages.
    =================================================================================================
    12/12/31 10:02:22.295 html: Servlet error
    java.io.IOException: Broken pipe
    at sun.nio.ch.FileDispatcher.write0(Native Method)
    at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:41)
    at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
    at sun.nio.ch.IOUtil.write(IOUtil.java:75)
    at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
    at java.nio.channels.Channels.write(Channels.java:71)
    at java.nio.channels.Channels.access$000(Channels.java:58)
    at java.nio.channels.Channels$1.write(Channels.java:145)
    at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:735)
    13/01/01 23:22:07.988 html: Servlet error
    oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.lang.RuntimeException: oracle.apps.fnd.common.AppsException: java.sql.SQLException: The Network Adapter could not establish the connection;
    at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912)
    at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:886)
    at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:1017)
    at oracle.apps.fnd.framework.OACommonUtils.processAOLJErrorStack(OACommonUtils.java:901)
    at oracle.apps.fnd.framework.webui.OAServerDelegate.releaseWebAppsContext(OAServerDelegate.java:1823)
    at oracle.apps.fnd.framework.webui.OAJSPHelper.handleErrorStackDisplay(OAJSPHelper.java:1455)
    at OAErrorPage.jspService(_OAErrorPage.java:257)
    13/01/01 23:41:46.338 html: Error initializing servlet
    java.lang.NoClassDefFoundError: oracle.apps.fnd.sso.Utils (initialization failure)
    at java.lang.J9VMInternals.initialize(J9VMInternals.java:140)
    at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:221)
    at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:287)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4830)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2978)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:738)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:735)
    Caused by: java.lang.ExceptionInInitializerError
    at java.lang.J9VMInternals.initialize(J9VMInternals.java:222)
    at oracle.apps.fnd.sso.Utils.<clinit>(Utils.java:674)
    at java.lang.J9VMInternals.initializeImpl(Native Method)
    =================================================================================================
    Current workaround is bouncing the oacore services.
    Already raised the SR with Oracle.
    Oracle support analyst suggesting to upgrade the JDK version from SR2 to SR11 or higher to fix this issue.
    Please let us know any other tips to fix this issue.
    Regards,
    Jagadeesha

    Hi,
    I have gone through the docs. , not use full. Please find the inline comments for the same.
    E-Business Suite Users Experience Intermittent HTTP-500 Errors and Database Connection Errors [ID 1314433.1] -- No solution
    R12: Http Server Crashing Frequently With Segmentation Fault (NAS or SAN filesystem) [ID 732857.1] -- Already it is under local file system only.
    How to resolve Broken Pipe errors in E-Business Suite R12 ? [ID 1480156.1] -- No solution
    Autoconfig is completed wihtout any errors.
    I have not chedked the database log file. I will check and update you soon.
    Cheers,
    Jagadeesha

  • How to resolve on my iPad: Unable to connect to server error when trying to log into Game Center?

    When I try to log into the game center, i get an error message that says: unable to connect to server due to an error communicating with the server.
    I have logged off iTune and any other app I was logged in, I have done a hard reset of my iPad, I have reset my modem, but nothing had any impact and I am now frozen out of my game center.
    Anybody has an idea of how to resolve this?
    Thanks,
    J

    1) May be there is a mismatch with the jar file name and the filename in the jad properties ( happens only if you rename the jar file)
    2) Check hollywood jad properties and the ringtone jad properties. May be the complete url is required for the jar file.
    3) If you are using any restricted APIs in your midlet, then make sure your jad properties has the required permissions.

  • Still getting "Unknown Server Error" when trying to log into CC Desktop App

    Hi -- I signed up for the early access file/font sync and received my email saying "You're In..."
    When I used the link in that email to download the CC Desktop App and when I launch it, I'm still receiving the error "Unknown Server Error" Sign in is currently unavailable. We are unable to access your account. Please try again later.
    Anyone run into a similar situation or have thoughts on how to remedy this?
    Thanks in advance!
    Kristina

    Solution 2 from this help article http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html should resolve the problem.

  • HT204053 server error when attempting to log into icloud

    I am having a problem signing into ICloud from my PC. It continues to say Can't Sign in because of Server Error. Help anyone!!!!!!

    Solution 2 from this help article http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html should resolve the problem.

  • I can't log into anything using firefox, including Mozilla every since the recent update!!!

    I have to use another browser. I have removed cookies, etc and it doesn't help. I can't log into yahoo, my bank, disney, or even mozilla. Please fix this!!!

    reset all settings
    settings- general- reset - reset all settings
    now reconnect to wifi
    settings - wifi- click network name - enter password - join
    try imessage again
    if issue persists backup info and restore via itunes
    Peace, Clyde

  • I can log into hotmail using firefox, but I can't read any of my emails, and most of the links don't work either.

    I can't read any emails in my msn account. I'm using Firefox 4.0.1. Every time I click on one, it acts like it's reloading the page, but nothing happens. It happens when I click on links to my folders as well. It works fine in Google Chrome though. Is anyone else having this problem?

    I'm having the same issues, running Firefox 3.6.
    After downloading Windows Updates for Vista, Hotmail has stopped working.
    I can log on, but can't click on any messages.
    None of the buttons work at all in Hotmail; it's completely frozen.
    I have to log on using Internet Explorer.
    I had the same problems with Firefox 4.0; Norton 360 wouldn't work properly with it, so I deleted it, and went back to Firefox 3.6.

  • No matter what I try, I cannot log into Facebook using Firefox, I get a message that states "you must enable cookies". I went into my security features and did this, nothing seems to work. I can however access facebook with Internet Explorer

    Whenever I attempt to sign in to Facebook using Firefox, I get a message that states that I must enable my cookies. I have gone to the security settings on my P.C. an attempted to o this, with no success

    Mecha Panda wrote:
    2) The Youtube player just shows black and nothing else.
    The first thing I would try is to update the graphics drivers; see http://forums.adobe.com/thread/945765

  • Error upon logging into the database

    We've been having this intermittent occurrence, where the following error pops up upon logging into a database instance (SQL Developer is already open)
    java.lang.NullPointerException
         at oracle.dbtools.raptor.utils.TNSHelper$2.compare(TNSHelper.java:349)
         at java.util.Arrays.mergeSort(Arrays.java:1270)
         at java.util.Arrays.mergeSort(Arrays.java:1281)
         at java.util.Arrays.mergeSort(Arrays.java:1281)
         at java.util.Arrays.mergeSort(Arrays.java:1281)
         at java.util.Arrays.mergeSort(Arrays.java:1282)
         at java.util.Arrays.sort(Arrays.java:1210)
         at java.util.Collections.sort(Collections.java:159)
         at oracle.dbtools.raptor.utils.TNSHelper.getTNSEntries(TNSHelper.java:355)
         at oracle.dbtools.raptor.utils.TNSHelper.getEntry(TNSHelper.java:216)
         at oracle.dbtools.raptor.utils.Connections.populateConnectionInfo(Connections.java:645)
         at oracle.dbtools.raptor.standalone.connection.RaptorConnectionCreator.getConnection(RaptorConnectionCreator.java:62)
         at oracle.dbtools.raptor.dialogs.conn.ConnectionPrompt.promptForPassword(ConnectionPrompt.java:67)
         at oracle.jdeveloper.db.adapter.DatabaseProvider.getConnection(DatabaseProvider.java:321)
         at oracle.jdeveloper.db.adapter.DatabaseProvider.getConnection(DatabaseProvider.java:254)
         at oracle.jdevimpl.db.adapter.CADatabaseFactory.createConnectionImpl(CADatabaseFactory.java:60)
         at oracle.javatools.db.DatabaseFactory.createConnection(DatabaseFactory.java:534)
         at oracle.javatools.db.DatabaseFactory.createDatabase(DatabaseFactory.java:208)
         at oracle.jdeveloper.db.DatabaseConnections.getDatabase(DatabaseConnections.java:607)
         at oracle.jdeveloper.db.DatabaseConnections.getDatabase(DatabaseConnections.java:562)
         at oracle.dbtools.raptor.utils.Connections$ConnectionInfo.getDatabase(Connections.java:145)
         at oracle.dbtools.raptor.utils.Connections.getConnection(Connections.java:874)
         at oracle.dbtools.raptor.utils.Connections.getConnection(Connections.java:855)
         at oracle.dbtools.raptor.navigator.DatabaseConnection.openConnectionImpl(DatabaseConnection.java:117)
         at oracle.dbtools.raptor.navigator.AbstractConnectionNode.getConnection(AbstractConnectionNode.java:30)
         at oracle.dbtools.raptor.navigator.ConnectionFilter.getFactory(ConnectionFilter.java:92)
         at oracle.dbtools.raptor.navigator.ConnectionFilter$1.doWork(ConnectionFilter.java:117)
         at oracle.dbtools.raptor.navigator.ConnectionFilter$1.doWork(ConnectionFilter.java:102)
         at oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.run(RaptorTaskManager.java:492)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
         at java.lang.Thread.run(Thread.java:619)What's strange is if that person closes SQL Developer and refrains from using it for about 20 minutes, everything works fine the next time they re-open the tool & try to log in. The issue seems to affect the Developer team in a round-robin fashion too, never hitting the same person 2 times in a row.
    We're using SQL Developer in a Citrix environment, and no one else has the problem simultaneously. Does anyone see something useful in the error message above?
    Thanks
    --=Chuck
    SQL Developer Version 2.1.0.63

    A good number of folks are having problems with this same error message at login, and nobody seems to have found a fix.
    I believe I have stumbled upon, if not a solution, at least part of the answer. If you're logged into a 10.4 workstation, open a Finder window and click the "Network" icon. The first time you do this, you'll only see "Library" and "Servers" icons, but if you let it sit for a moment, other folders will magically appear. One of these is "My Network" which is the critical part.
    In Workgroup Manager, edit one of your users' home directory configuration. There's a URL piece, usually "afp://server.domain.com/Users" (which is what shows up in the window when you click on the "Home" tab for that user), and then there's a "Home" path that is usually something like "/Network/Servers/servername/Users/username". Trouble is, you've noticed that 10.4 doesn't put servers into the "Servers" path, but rather into the "My Network" path.
    So, if you change that "Home" path to read "/Network/My Network/servername/Users/username", it should work--with one caveat. Apparently 10.4 doesn't create the "My Network" path on a given client until you actually browse the network on that client. If you haven't logged into a 10.4 workstation and browsed the network, the "My Network" path won't be there, and you'll still get the error. Login as a local user, browse the network (so that the "My Network" folder shows up), logout, and then login as an Open Directory user, and it should work.
    I'm betting that 10.3, 10.4, and 10.5 all handle this issue differently, so if you're in a mixed-version situation, you may have to experiment to find a workable fix.
    Derndest thing I ever saw.

  • Runtime error Server Error in '/' Application. in myspace log-in =(

    Hi i'm having the same problem as other posts here =(
    i went to login to my myspace and i get this message:
    Server Error in '/' Application.
    Runtime Error
    Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
    Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
    <!-- Web.Config Configuration File -->
    <configuration>
    </configuration>
    Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
    <!-- Web.Config Configuration File -->
    <configuration>
    </configuration>
    ----and i dont know what to do.
    Can anyone help me please coz this suxxxxxxxxxx =(
    thanks for any help and replies @};-

    emooooooo
    dude!!!!!!!!!!
    you rockkkkkkkkkkkk!
    the myspace login problem iz fixed! =)
    thanx man!
    @};-

  • When I try to log in to my BC account I get a message that says this"Server Error in '/' Application.  The resource cannot be found.  Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its nam

    When I try to log in to my BC account I get a message that says this"Server Error in '/' Application.  The resource cannot be found.  Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable.  Please review the following URL and make sure that it is spelled correctly.   Requested URL: /Admin/Index2.aspx"
    Any ideas???

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Test.

  • Server Error in '/' Application. [COMException (0x81020024): Unable to connect to database]

    Hi,
    My team and I are trying to resolve this issue. some of our users are having trouble uploading data into the database. this is the error that they are getting.
    I would really appreciate it if you could help me get ridd fo this issue.
    Server Error in '/' Application.
    Unable to connect to database. Check database connection information and make sure the database server is running.
    Description:
    An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details:
    System.Runtime.InteropServices.COMException: Unable to connect to database. Check database connection information and make sure the database server is running.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace
    below.
    Stack Trace:
    [COMException (0x81020024): Unable to connect to database.  Check database connection information and make sure the database server is running.]
       Microsoft.SharePoint.Library.SPRequestInternalClass.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId,
    String bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +0
       Microsoft.SharePoint.Library.SPRequest.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId, String
    bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +359
    [SPException: Unable to connect to database.  Check database connection information and make sure the database server is running.]
       Microsoft.SharePoint.Library.SPRequest.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId, String
    bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +479
       Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +666
       Microsoft.SharePoint.SPWeb.InitializeSPRequest() +548
       Microsoft.SharePoint.SPWeb.EnsureSPRequest() +75
       Microsoft.SharePoint.SPWeb.get_Request() +74
       Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +613
       Microsoft.SharePoint.WebControls.SPControl.GetContextWeb(HttpContext context) +41
       Microsoft.SharePoint.SPContext.get_Current() +123
       CKS.EBE.BlogContext.get_BlogEnabledSite() +37
       CKS.EBE.BlogHttpModule._app_PostAuthorizeRequest(Object sender, EventArgs e) +113
       System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
       System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
    the description of the error on the server is as follows:
    The description for Event ID ( 27745 ) in Source ( Windows SharePoint Services 3 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use
    the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: #50071: Unable to connect to the database MOSS_Content_RBI on BartDB\Bart.  Check the database connection information
    and make sure that the database server is running..

    are you using the Aliases for the SQL Server, make sure your account having the correct permission.
    If it is your QA farm, you can run the config wizard to fix his problem...
    check this post having the similar issue.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/478d6b3a-a51e-48c5-832b-5afb51c69734/unable-to-connect-to-the-sql-content-database-from-sharepoint-web-front-server?forum=sharepointadminlegacy
    http://hammad1.wordpress.com/2008/06/04/unable-to-connect-to-database-in-event-logs/
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Server Error in '/' Application. WRT54GL Mangling traffic?

    Okay, here goes.  Maybe someone can help me understand this behavior and what I might be able to do to fix it. 
    I run both wired and wireless at home, a netgear 10/100/1000 workgroup switch in my room for multiple PC's and a fileserver.  Connected directly to a WRT54GL.  Which is connected to one other PC, and provides wireless service for 2 Laptops, a PSP, a DS, and a few other devices.  So, here's the issue.  This linksys is relatively new (picked it up less than a month ago.) 
    A few random sites, I come across an error basically stating "Server error in '/' application."  One fine example is http://www.ntreev.net (a site that provides a game service i actively play.) 
    This is the most prominent, as I used to regularly visit that site.  Now, since installing my WRT54GL, I can't even visit the site without that error.  Luckily, I still have the forums/etc bookmarked.  But any account maintenance, logging in, or even trying to view the updates for games, all result in that error.   For the curious, here's what I have tried so far... :
    Turn off SPI/Firewall protection : Still no go.
    Filter NAT Redirection : No go.
    Disable all VPN/IPSEC passthru (of course not entirely relevent) : No go.
    Add my PC to DMZ and disable anything for my NAT ip : Nope there too.
    Plug directly into the router, bypassing the netgear 10/100/1000 switch in my room. : Nope ...
    Rebooting all of the network equipment, and PC's still cause the behavior.
    Laptop on wireless or wired directly to the router : Nope ... I'm seeing a pattern here.
    Remove router entirely, plug PC directly into Surfboard cable modem.  It works perfectly.
    What is this router doing to my outgoing web traffic that's causing this.  I dropped 50$ on something that is mangling traffic and I've no way to fix it.  I've upgraded to the latest firmware, and it did nothing to help me.  All that did was cause me to have to set up mac filters for the wireless(again,) and more.
    I've been playing with options here and there for 2 weeks, in combination, to see if there's anything I can do to remedy this, but it's all a no go.
    Anyone have any ideas that may help?
    Thanks in advance,
    Chris
    (Just a note :  I tried my old netgear, and it worked fine, only problem with that is it locks up regularly, and loses settings on restart/power cycles, so I replaced it with a fairly well reviewed box.  So I know its not my switch, and its not my cable modem, nor any part of my network, except the WRT54GL... as things work without it in the equation.)
    Message Edited by Fury216 on 07-13-2009 06:14 AM

    Hello,
    Thanks for the reply (again,) and sorry I couldn't get back here for a while...
    I couldn't do this for a while because I had exams and projects online that I absolutely had to finish this week, so last night I broke down and decided to look at things a bit more.
    I went ahead and reflashed it with the current (latest) firmware,  directly from : http://www.linksysbycisco.com/US/en/support/WRT54GL/download , chose my version, 1.1 and installed it.
    I reset my router, repeatedly already, but did it once more.  I didn't configure all of my options, but got it online at least.  (Didn't want to bother entering all the mac addresses for wireless access again at the moment.)
    Same behavior,  I am starting to really get frustrated with this as anytime I want visit this site (which is quite a bit ...), I have to go unplug my modem, unplug my router, plug my PC's network cable directly in the modem, and plug it back in, in which case I can get to it just fine.  Then when I'm done and have no need to be on that site for a while, I can put everything back normally.  But for any account maintenance, web based stuff (games, etc), and more on there, I have to physically remove my linksys from the network in order for it to function.  
    I am seriously at a loss with this, as it's been more than 30 days since I've bought this network problem (my WRT54GL), and therefore can't return it now.  Anyone have any more ideas/options ?
    Thanks

  • Sharepoint FBA web application error: Server Error in '/' Application. when login to the web application

    Hello Team,
    I have configured FBA in SharePoint 2010. After the FBA i can get the SQL users using people picker and added users as a site collection admin.
    When i tried to access the site, it shows login page and i have given user name and password then pressed signin button, it's try to redirect the another page and showing below error,
    Server Error in '/' Application.
    Runtime Error 
    Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed. 
    Details: To enable the details of this specific error message to be viewable on the local server machine, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application.
    This <customErrors> tag should then have its "mode" attribute set to "RemoteOnly". To enable the details to be viewable on remote machines, please set "mode" to "Off".
    <!-- Web.Config Configuration File -->
    <configuration>
        <system.web>
            <customErrors mode="RemoteOnly"/>
        </system.web>
    </configuration>
    Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
    <!-- Web.Config Configuration File -->
    <configuration>
        <system.web>
            <customErrors mode="On" defaultRedirect="mycustompage.htm"/>
        </system.web>
    </configuration>
    "An exception occurred when trying to issue security token: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported
    method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> 
    <html xmlns="http://www.w3.org/1999/xhtml"> 
    <head> 
    <title>IIS 7.5 Detailed Error - 500.19 - Internal Server Error</title> 
    <style type="text/css"> 
    <!-- 
    body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} 
    code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} 
    .config_source code{font-size:.8em;color:#000000;} 
    pre{margin:0;font-size:1.4em;word-wrap:break-word;} 
    ul,ol{margin:10px 0 10px 40px;} 
    ul.first,ol.first{margin-top:5px;} 
    fieldset{padding:0 15px 10px 15px;} 
    .summary-container fieldset{padding-bottom:5px;margin-top:4px;} 
    legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} 
    legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; 
     border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; 
     border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'..
    I checked sharepoint logs and didn't see any log. but i can see below error logged in  Event viewer application logs,
    I tried changing all customErrors mode and still same error.
    Kindly help me on this, how to resolve the issue.
    Thanks in advance.
    JP

    Hi,
    According to your description, my understanding is that the error occurred when you accessed SharePoint site through form based authentication.
    How did you configure the form based authentication?
    Here is a link about the steps required to configure FBA in SharePoint 2010 for your reference, and check the steps to see if there anything wrong in your configuration:
    http://www.codeproject.com/Articles/352841/How-to-Configure-Form-Based-Authentication-FBA-in
    Through the common error message, we cannot find what exactly caused the error.
    Here is a similar thread for you to take a look:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the?forum=sharepointgeneralprevious
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • SharePoint 2013 - Server Error in '/' Application - This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database

    Hi
    After I ran SharePoint configuration wizard successfully to upgrade to SharePoint 2013 / SP1.
    I can open Central Administration site just fine.
    but now when I open any Site collection,  I got this error.
    Server Error in '/' Application
    This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
    Wizard, located on the Start menu in Microsoft SharePoint 2010 Products
    I have restarted all the servers:  SQL server, WFE and APP servers but still cann't get this resolve.
    Services on all servers are running,  IIS - application pools are running.
    Can someone help with where that could be a problem or if there is a solution.
    Thanks in advance for your comments or advices.
    Swanl

    Please verify the followings:
    Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
    Make sure that your Farm account has permission to the configuration database.
    Lastly verify that your database didn't for some reasons go into recovery mode.
    once everything is fine and you are still having issues, restart the SQL host service on the SQL server.
    Once the service is restarted you will need to reboot Central Admin and then your front end servers.
    In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server.
    More information about creating rules in firewall, please refer to the following posts: http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
    Here is a similar post for you to take a look at: http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral 
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Maybe you are looking for

  • Enhanced Approval Procedure Functions- authorization issue

    Dear Expert, I have activated the enhances approval procedure function as per below screen shot: Granted authorization as mention in New ChaRM Feature with SP 10: Enhanced Approval Procedure Functions by Michael. With SM_APP_AP with 02, 22 and 75. Bu

  • How to secure video recording?

    I have a ColdFusion app server connecting to a separate FMS server (both different machines). To get to the code that displays the object/embed tags to show the SWF to record, one has to enter their username/password. However, essentially, after one

  • XI Interface With CRM RFC

    I have a BAPI in CRM that I call from XI via RFC. In CRM, I want to be able to see what happens with the function; whether it fails, abends, etc. I have some strange things happen and am trying to trouble shoot the cause. From the XI side, all looks

  • How to know list approver names for a PR?

    Hi, In Purchase requisition, there is set approvers to approve one by one. What is the table to get the list names (approves) by passing a PR No and Item number. Thanks

  • Where Are The Custom Preset Files Stored?

    I deleted FCS 2 before installing FCS 3 and unfortunately all of my custom presets in Compressor were lost. I have got Time Machine with the old Compressor but I don't know where the old preset files are stored. Ideally I would like to copy them to t