Server error while communicating to BI server
Hi,
There is a run time error while executing the Query in Bex Analyser while the same query is working fine in Portal..
*Cant paste the image here, but the error states -:
AN ERROR OCCURED WHILE COMMUNICATING WITH THE BI SERVER
As a result of this error, the system has been disconnected from the BI server.
Detailed Description:
System exception thrown while marshaling RFCTYPE_CHAR to .NET type*
I really dont know much about this as I am Basis Guy! Please suggest some actions from the Basis Point of view.
Regards!
Deep!
HI,
Check if you have latest front end patch for your GUI and also make sure the .NET framework 2.0 is installed. This is needed for SAP BI7 BEx analyzer.
Also, take a look at this note 1013202.
Hope it helps.
Thanks,
KR
Similar Messages
-
Error while communicating with the server
Hi Experts,
I'm having the following issue, when I try to send data using an input schedule the server says that there was an error while communicating with the server and don't send the data, I took a look at the log file and it says the following,
==============[BPC Logging]==============
[Message Type] : ERROR
[Job Name] : OSoft.Services.Application.FileAccessService.FileAccessServiceProxy
[DateTime] : 4/6/2011 8:42:44 AM
[UserId] : CAMESAP\BPC_SYSADMIN
[Message] : UJF_EXCEPTION E018 Cannot find document/directory 0
==============[BPC Logging End ]==============
Also i went to take a look at the default script logic, because i remember that this error happened to me when i wrongly program an script logic in the default.lgf but it shows me the following error when I open it,
System.InvalidCastExeption: Specified cast is not valid
at System.data.DataColumnCollection.get_Item(String name)
at System.data.DataRow.get_Item(String columnName)
at Osoft.Consumers.Admin.AdminLogicClient50.LogicMain.GetLogic()
If I compile the file, the error stop appearing, put with all new logic files it happens at first, I think that these two errors are very deep related, if anyone can help me will be very appreciated,
Thanks in advancedHi,
I have faced the similar kind of problem in BPC NW 7.5 SP5.
The main reason is when you are trying to send any data via input schedule, you will get this web server communication issue.
1) Check if any thing you are calling script logic under default.LGF. Exclude the logic out from default and test it.
2) Process all the dimensions in application
3) Perform Lite optimization and check are there any errors.
4) Finally check BPC COM+ services and check if any service stopped and also check osoft send governer service in microsoft services.
5) Diagnoise usign server manager.
6) Try input some thing in apshell and check if u face the same web server communication error? -
Internal Server Error while using IBM HTTP SERVER
I used Webstudio tool to develop a JSP page and publish it on the IBM HTTP Server. When i was previewing the file, I got a internal server error 500 with the message of misconfiguration. I will be
extremely happy if you can provide an answer for this. All the path and classpath settings are good.
Thanks
Srini_gsAre you talking AS400? Websphere Application Server? Are you sure the file is in the right place? By default jsp's go in a folder or directory called 'web' which resides in the same directory as the 'servlets' directory. So in one directory you would have two directories, one called servlets for .class files and one called web for jsps. I don't know if this helps or not, but check it out. But I don't know if this were your problem if you wouldn't get a 'NOT FOUND' error instead of the misconfiguration error.
-
Error occured while communicating with web server
In Netweaver if you receive this error " error occured while communicating with web server "
check your script logic file if you have mande any change to dimension
names
VinooHi,
validate below note
Note 1330145 - an error occured while communicating with the web server
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b161a590-0201-0010-5590-91fa5076a914
regards
nag -
Error on timesheet submission "An error occurred while communicating with the server.
Hello, we have many users who are encountering errors submitting timesheets following our migration to Project Server 2013 (SP1 April 2014 CU). The error is:
An error occurred while communicating with the server. Check connectivity with your administrator to determine whether further action is necessary.
This follows the specific timesheet, if I open a delegate session on my machine, I can reproduce the error. However, simply deleting and recreating the timesheet has resolved it for many users, at least until the next timesheet submission.
Has anyone seen this sort of widespread behavior and have a solution beyond deleting and recreating the given timesheet?
Thanks!Hello Joncantrell
I just ran into issue and found a way to resolve, though it may not be the best. I think it is a bug, but here is how I fixed it.
1) Delegating as the user
2) Deleted the timesheet
3) Going line by line, I check each task that had a status of "Not Submitted" and "Send Progress for Select Task".
4) The error came up only for one task.
5) Open that schedule, remove resource from task, saved and published.
6) Deleted and recreated timesheet
7) Submitted timesheet and processed normally.
I hope this helps
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries -
An Error Occurred While Communicating with Web Server
We are getting an error message ("An Error Occurred While Communicating with Web Server") when sending data from BPC Excel. Any one konws why it is coming.
We are using ASP.NET version 2.0.50727 in ISS ServerHi,
This kind of error happens when EVDRE status is not Ok.
Even if EVDRE status is OK please make the relevant changes in expansion range--> MemberSet values.
Hope it helps
Raman
Edited by: Radharaman Singh Rajkumar on Jun 29, 2010 5:25 PM -
500 Internal server error while running sqlsrv_query in PHP
Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help.
I am running a query through php:
$ls_parcel_query = "select * from ParcelDetail order by ExtractDate";
$result = sqlsrv_query($conn, $ls_parcel_query, array(), array("Scrollable"=>"keyset","QueryTimeout"=>300));
$no_of_rows = sqlsrv_num_rows($result);
echo "<br/>".$no_of_rows;
It gives (After 30 seconds):
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
I have php.ini settings like below:
max_execution_time = 90
memory_limit = 128M
While running this query in SQL SERVER 2008 R2, it successfully gives result in some times in 1 minute and sometimes in 2 minutes.Hello,
A 500 Error will be caused due to many reason.To troubleshooting this issue, you can try to check out the error log and get more information on what is causing the error.
Reference :
"500 Internal Server Error" while running PHP
HTTP Error 500 Internal server for php pages and solution
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2
Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh. -
Error 500--Internal Server Error while opening a taskflow in inline popup
Hi,
I am getting "Error 500--Internal Server Error" while opening a bounded taskflow as a popup from another bounded taskflow containing page fragments. The popup taskflow contains jspx pages. I even removed the jspx pages from the popup taskflow to check if the error is resulting from the bindings on the pages but still I get the same error. The entire stack trace of the error in the popup dialog is :
Error 500--Internal Server Error
oracle.adf.controller.ControllerException: ADFC-04008: The BindingContext on the session is null.
at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
at oracle.adfinternal.controller.util.model.AdfmUtil.getBindingContext(AdfmUtil.java:47)
at oracle.adfinternal.controller.util.model.DCFrameImpl.makeCurrent(DCFrameImpl.java:125)
at oracle.adfinternal.controller.state.ViewPortContextImpl.makeCurrent(ViewPortContextImpl.java:1006)
at oracle.adfinternal.controller.state.RequestState.setCurrentViewPortContext(RequestState.java:159)
at oracle.adfinternal.controller.state.ControllerState.setRequestState(ControllerState.java:900)
at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:355)
at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:105)
at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:112)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:59)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:258)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Any help is greatly appreciated.
Thanks,
KKHi Frank,
Thanks for the reply. I am using it as an inline popup. I am trying to create command links dynamically in an iterator. When a link is clicked a popup window opens. The text of the link is passed to the popup window by creating a variable in the session scope ( I even tried request scope) by an action listener in the backing bean.
I tried to create another simple application with a static command button which passes its text to popup window through a session scope variable. It worked fine. I am not sure why the same procedure is not working in my original application. Can you give me a hint what could possibly go wrong according the exception stack trace ?
Thanks,
KK -
500 internal server error while deploying a Web Dynpro application
Hi
I got the 500 internal server error while deploying the application to server.
I tried to find the log file at usr --> SAP --> SID --> JC XX --> j2EE --> Cluster --> Server 0 --> log, but no log was there.
There were structure changes in the RFC and also code change in my Web
Dynpro code.
I´m working on EP 7.
NWDS version is 7.0.1
Please help me as the production move is pending because of this.
Regards
Vineet VikramHi
Restarting the server does not help in my case.
I tried it several times.
I'm getting following error message in NWA>
Originated from: com.sapmarkets.bam.logcontroller.InvalidLogQuerySessionException: Invalid or expired log query session "1"
at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.closeLogQuerySession(LogControllerFacade.java:356)
at sun.reflect.NativeMethodAccessorImpl.invoke0
Can you pl help on this.
Regards
Vineet Vikram -
Error in Communicating with DCA Server
Hi,
I have Cisco LMS 2.6 and next modules:
1. CiscoWorks Common Services 3.0.6
2. Campus Manager 4.0.13
3. CiscoView 6.1.5
4. Device Fault Manager 2.0.13
5. Internetwork Performance Monitor 2.6.0
6. Integration Utility 1.6.0
7. Resource Manager Essentials 4.0.6
Windows Server 2003 SE SP2
I have some problems:
1)
When I try enter to Device and Credentials I get message "Error in communicating with DCA Server.
DCA Server may be down. Please start the DCA Server and then refresh the page."
I try to restart CiscoWorks Daemon Manager over Services.
I cannot get information a lot of time from command "pdshow". Only black screen on the window CMD.
Or I get error
C:\Documents and Settings\zykov>pdshow
ERROR: GetReply failed:
ERROR: Daemon Manager startup in progress. Please wait.
dcr.log
[ Чт фев 18 16:51:28 YEKT 2010 ] [Ajp13Processor[9009][4]] FATAL com.cisco.nm.dcr.DCRProxy - Error in Communication to DCRServer , Reason :DCRException ID - -202 : CSTM Error Code [-1] CSTM Comm Type [0] - Unknown exception before invocation
[ Чт фев 18 20:32:35 YEKT 2010 ] [Ajp13Processor[9009][3]] FATAL com.cisco.nm.dcr.DCRDatabaseAccess - Severe error in DCRDatabaseAccess initialization - JZ00L: Login failed. Examine the SQLWarnings chained to this exception for the reason(s). 0 JZ00L
[ Чт фев 18 20:32:35 YEKT 2010 ] [Ajp13Processor[9009][3]] FATAL com.cisco.nm.dcr.DCRSystem - Unable to Instantiate DCRDataManagement ObjectJZ00L: Login failed. Examine the SQLWarnings chained to this exception for the reason(s).
java.sql.SQLException: JZ00L: Login failed. Examine the SQLWarnings chained to this exception for the reason(s).
DCRServer.log
[ Thu Feb 18 21:10:41 YEKT 2010 ] Starting DCR Server...
[ Thu Feb 18 21:10:43 YEKT 2010 ] No restore has happened
dcrclient.log
[ Чт фев 18 20:50:49 YEKT 2010 ] [Ajp13Processor[9009][5]] FATAL com.cisco.nm.dcr.DCRProxy - Error in Communication to DCRServer , Reason :DCRException ID - -202 : CSTM Error Code [-1] CSTM Comm Type [0] - Unknown exception before invocation
2) When I run Alerts and Activites I get error "An exception occurred. Please check the AAD.log file for further details."
AAD.log
18-фев-2010|21:30:10.291|ERROR|AAD|Ajp13Processor[9009][3]|AFDLaunchAction|perform|.|Error in calling getPartitionNamePMServercom.cisco.nm.xms.ctm.common.CTMException: Read timed out/Error in received response Connection reset
3) On the window Home of Common Services I have message "JRM server is down or inaccessible for this user"
I try reinstall last modules Campus Manager 4.0.13,
Device Fault Manager 2.0.13,
CiscoWorks Common Services 3.0.6.
But it cannot help me.
I think that this problems related. Yesterday all works correctly.
Thank you for your help.You are right the problem was related with antivirus.
After removal antivirus DCA Server started successfully.
Remains the question as to be without an antivirus program?
Also remains a problem in the window Alerts and Activites.
When I click on the Device Name field (for some devices) does not open Detailed Device View.
The window closes immediately after opening. -
Error in communicating with DCR server (Operations Manager 8.5)
Hi,
I just installed Operations Manager 8.5 on a new server. And, although I'm able to login to the OM, I'm unable to add any devices to the DCR. When attempting to add the device the following error is returned:
"Error in communicating with DCR Server
DCR Server may be down. Please start DCR server and then refresh the page. "
The same error is returned when an attempt is made toaccess the screen to change the mode (standalone/master/slave.) However, according to pdshow output DCRServer is up and running:
Process= DCRServer
State = Running normally
Pid = 9220
RC = 0
Signo = 0
Start = 7/29/2011 2:46:33 PM
Stop = Not applicable
Core = Not applicable
Info = DCRServer is up and running
I've browsed the site and tried all suggestions for LMS since I didn't see any for OM. No success.
Any/all suggestions are much appreciated.
Kind regards,
BartIt appears the answer is rather simple. According to a trusted source who works for a Cisco training partner, one must wait before even attempting a login into OM.
Apparently, it takes about 25 to 30 minutes for all the services to start. Any attempt to login to the OM may corrupt the database. This is based on CiscoWorks. When command "net stop crmdmgtd" is issued it takes about 5 minutes to stop the service and a confirmaiton that the service was stopped is displayed. However, when starting the service with "net start crmdmgtd" there is no confirmation that it started successfully. One may look into ":\ program Files\CSCOpx\objects\dmgt\ready" directory for a _lock file." As long as the lock file is present one shouldn't use the browser to login. However, I was advised the best approach is to restart the service and give it 30 minutes.
It worked for me
Kind regards,
Bart. -
Error in Communicating with DCR Server LMS 4.0
I´m receiving this error when I try do add a device in isolated form or by discovery:
Error in communicating with DCR Server.
DCR Server may be down. Please start the DCR Server and then refresh the page.
I am using windows 2008 standard server RC1 SP1, and CiscoWorks LMS 4.0.
I had applied all of patches includes.
The DCRserver is running. ( I did restart it)You're using Windows 2008 RC1 (a release candidate version)? LMS is only supported on the final shipping version of Windows 2008, and not yet on R2.
If you're running on the final version of 2008 server, post the output of the pdshow command as well as the dcr.log, DCRServer.log, NMSROOT/MDC/tomcat/logs/stdout.log and stderr.log. -
Error in communicating with DCR Server. in LMS 3.1
I am receiving this error when I try to ad device: Error in communicating with DCR Server.
DCR Server may be down. Please start the DCR Server and then refresh the page.
The DCRserver is running. ( I did restart it)
I am using Windows version of LMS 3.1
CiscoWorks Common Services 3.2.0 Licensed Not applicable
Campus Manager 5.1.4 Purchased 300
CiscoView 6.1.8 Licensed Not applicable
CiscoWorks Assistant 1.1.0 Licensed Not applicable
Device Fault Manager 3.1.3 Purchased 300
Internetwork Performance Monitor 4.1.0 Purchased 300
Integration Utility 1.8.0 Licensed Not applicable
LMS Portal 1.1.0 Licensed Not applicable
Resource Manager Essentials 4.2.0 Purchased 300
Health and Utilization Monitor 1.1.0 Evaluation(Expired) 100Hi,
This issue most likely is related to a communication problem with the database or a corruption as we can see from the logs :
2010/11/21 19:44:41 main ani ERROR POStore: Failed resolving object because: java.lang.NullPointerException
2010/11/21 19:44:41 main ani ERROR AniMain: java.lang.NullPointerException
ANI Server failed to load from the database.
Please stop and restart the system. You may need to re-initialize the database.
If this does not work, please contact technical support.
The next step is to re-initialize the Campus Manager database. This procedure will delete all the records and maps that you have in Campus Manager, you would need to run a new Campus Data Collection and User Tracking Acquisition to have clean and fresh database information.
If that ok with you, you can try the below steps to re-initialize the Campus database. By doing this, it will not effect any other database of LMS will clean Campus Manager database.
+) Stop the daemon manager:
net stop crmdmgtd
+) cd CSCOpx\bin\
+) Type the following command (case sensitive):
perl dbRestoreOrig.pl dsn=ani dmprefix=ANI
+) Start the daemon manager:
net start crmdmgtd
Now, wait another 15 minutes and wait for dmgtd.lock file to release from location CSCOpx\objects\dmgtd\ready.
Now check the status of ANIServer with command :- pdshow ANIServer ( case sensitive)
it should have the status Busy with Flag set.
Thanks,
Gaganjeet -
Error while running the Managed server
Hi
i am getting the below error while running the Managed server.
java.lang.IllegalArgumentException: config=oracle.dms.config.DumpConfig@186793e logDir=null agency=oracle.dms.reporter.SpyAgency@181f91a dmsTimer=java.util.concurrent.ScheduledThreadPoolExecutor@95b5c
at oracle.dms.impl.producer.Dumper.<init>(Dumper.java:100)
at oracle.dms.app.ServerInitializer.init(ServerInitializer.java:136)
at oracle.dms.app.BaseInitializer.getInitializer(BaseInitializer.java:360)
at oracle.dms.app.DmsSpy.init(DmsSpy.java:210)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
####<Dec 6, 2011 7:47:30 PM IST> <Info> <Deployer> <01hw198371> <managed_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JGJiy3T5EgGqywAhMG1ErYE5000002> <1323181050633> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_ADMIN to STATE_PREPARED on server managed_server1.>
####<Dec 6, 2011 7:47:30 PM IST> <Info> <Deployer> <01hw198371> <managed_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JGJiy3T5EgGqywAhMG1ErYE5000002> <1323181050711> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_ADMIN to STATE_PREPARED on server managed_server1.>
####<Dec 6, 2011 7:47:30 PM IST> <Error> <Deployer> <01hw198371> <managed_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JGJiy3T5EgGqywAhMG1ErYE5000002> <1323181050726> <BEA-149231> <Unable to set the activation state to true for the application 'DMS Application [Version=11.1.1.1.0]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "Spy" failed to preload on startup in Web application: "dms.war".
java.lang.IllegalArgumentException: config=oracle.dms.config.DumpConfig@186793e logDir=null agency=oracle.dms.reporter.SpyAgency@181f91a dmsTimer=java.util.concurrent.ScheduledThreadPoolExecutor@95b5c
at oracle.dms.impl.producer.Dumper.<init>(Dumper.java:100)
at oracle.dms.app.ServerInitializer.init(ServerInitializer.java:136)
at oracle.dms.app.BaseInitializer.getInitializer(BaseInitializer.java:360)
at oracle.dms.app.DmsSpy.init(DmsSpy.java:210)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: java.lang.IllegalArgumentException: config=oracle.dms.config.DumpConfig@186793e logDir=null agency=oracle.dms.reporter.SpyAgency@181f91a dmsTimer=java.util.concurrent.ScheduledThreadPoolExecutor@95b5c
at oracle.dms.impl.producer.Dumper.<init>(Dumper.java:100)
at oracle.dms.app.ServerInitializer.init(ServerInitializer.java:136)
at oracle.dms.app.BaseInitializer.getInitializer(BaseInitializer.java:360)
at oracle.dms.app.DmsSpy.init(DmsSpy.java:210)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
can anyone helpSrinath is 100% correct.
If the deployment failed, then there will very likely be some mention in the log.
You state that you checked the log, but you didn't mention whether you found an error, no error, a successful startup, etc. you are providing painfully few details to assist.
I would bet if you posted your .log and .out logs to Pastebin.com - #1 paste tool since 2002 and provided us links, We would be able to point out the error.
Lacking that information, my best advice would be to re-install and double-check you're completing all steps in the correct order.
Also, be sure to always search the product documentation first, the search this forum. For basic issues (e.g., standard installation), there is a high probability that someone else has asked that question.
I hope that helps,
-ryan
Maybe you are looking for
-
Image processor from Bridge problem
ONe of most annoying things with Bridge is that often, image processor wont open from Bridge -- unless you quit out and relaunch Bridge -- quite a hassle.
-
In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?
-
Hi all, We are using EP 7.0 as front end and ECC 6.0 as back end . We are often getting iview runtime error and TEA portal error, due to which link is not opened for the end users, so as recommeded by SAP ,every week end we are restarting the Portal
-
How to make iTunes detect the new location of music files?
Hi everyone. I moved all of my music to a different location on my hard drive, and I changed the location in iTunes preferences, but it doesn't seem to detect this, so my library is empty now. I saved an itl, xml, and temp file as well, but I don't k
-
Adressbook hang Exchange 2010 - Outlook 2010,2013
Hi Forum we have Exchange 2010 and Clients with Office 2010, 2013 on all client we can't use adressbook, when we open it and change the adresslists Outlook hang i think the problem is since Exchange Rollup 8 v2