Internal Server Error while using IBM HTTP SERVER
I used Webstudio tool to develop a JSP page and publish it on the IBM HTTP Server. When i was previewing the file, I got a internal server error 500 with the message of misconfiguration. I will be
extremely happy if you can provide an answer for this. All the path and classpath settings are good.
Thanks
Srini_gs
Are you talking AS400? Websphere Application Server? Are you sure the file is in the right place? By default jsp's go in a folder or directory called 'web' which resides in the same directory as the 'servlets' directory. So in one directory you would have two directories, one called servlets for .class files and one called web for jsps. I don't know if this helps or not, but check it out. But I don't know if this were your problem if you wouldn't get a 'NOT FOUND' error instead of the misconfiguration error.
Similar Messages
-
Configuring UI service using IBM HTTP server
Hi,
I am doing an install of 9.2.1. WebSphere has been used as the app server throughout the installation. When I go to configure UI services (web analysis etc) I have to enter the location of the IBM http server. However, I do not know what file to use. I have also heard it is a separate install??
I would appreciate any help.
Thanks,
NathanHi,
I think you have to install the IBM http server prior to the configuration, you can download it from http://www-01.ibm.com/software/webservers/httpservers/
Cheers
John
http://john-goodwin.blogspot.com/ -
Getting Internal Server Error while using SSPR in IDM 7.1
Hi All,
We have implemented SSPR functionality in our IDM 7.1 system and everything was working fine as expected.
However since last few days we are getting below error, once users is trying to change his password using SSPR.
He is entering his unique id, then answering the authentication questions correctly, but when he specifies the password and clicks on finis, below error comes up.
Could anyone please advise.
500 Internal Server Error
java.lang.NullPointerException
at com.sap.idm.wd.wf.task.PwdRecoverComp.SaveData(PwdRecoverComp.java:255)
at com.sap.idm.wd.wf.task.PwdRecoverComp.MoveNext(PwdRecoverComp.java:293)
at com.sap.idm.wd.wf.task.wdp.InternalPwdRecoverComp.MoveNext(InternalPwdRecoverComp.java:192)
at com.sap.idm.wd.wf.task.PwdRecoverCompView.onActionNext(PwdRecoverCompView.java:165)
at com.sap.idm.wd.wf.task.wdp.InternalPwdRecoverCompView.wdInvokeEventHandler(InternalPwdRecoverCompView.java:193)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Thanks
AditiHi Matt,
Thanks for you answer.
Yes, I agree error log is not that helpful.
There are no errors or any log for that matter in IDM Console side, so I am guessing that error is occurring entirely in Java side.
I am trying to reset password for ABAP and IDM UI.
Backend is IDM UME.
Thanks
Aditi -
Internal Server Error while using Frontpage Server Extension on SharePoint2013
I am working on a Proof of concept where I am trying to use Frontpage server Extension - RPC protocol to upload the files in sharepoint document library using "/_vti_bin/_vti_aut/author.dll". I am using following URL to upload bytes to SharePoint
Document library.
http://SPServer/Site/_vti_bin/_vti_aut/author.dll?method={0}&service_name=put+document&document=[document_name=<Encoded document path>;meta_info=[]]&put_option=overwrite,migrationsemantics&keep_checked_out=false&comment=
The same code works on one sharepoint environment but not on other. I am getting Internal Server Error (500) exactly when i try to execute the webrequest.GetResponse for the url given above.
Any pointers will be greatly appretiated.
Regards,
IndraHi,
According to your description, my understanding is that when you use the Front Server Extension to upload the files, it occur the error "Internal Server Error(500)".
As in your another environment, it works fine, for a better troubleshooting, I suggest you can do as the followings:
1. Using Fiddler to check the web request which occurs error to find the detailed error message and you can compare if there are something difference between the two environments.
2. Check the Windows server event log to check if there are something error message in it.
Here is a detailed article about troubleshooting solutions:
how to solve Web Service call failed error
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
500 Internal Server Error while using BEx Web Application
Hello All,
Kindly help me in resolving below issue which is getting popped up for only few people, when they are clicking some of the MSS links.
500 Internal Server Error
Failed to process request;contact your system administrator
Error Summary
Exception occured while processing the current request;this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Cannot get connection for 60 seconds. Possible reasons: 1) Connection are cached within System Thread (can be any server service or code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPFactory" is not enough according to the current load of the system
Regards,
Ananda SwaroopHello Blanca,
As this is happening in our production system, Since sap note in your reply is very helpful, we are looking to implement in DEV,INT and then in production.
After testing, I will update result in this thread.
Thanks for your reply.
Regards,
Ananda Swaroop -
Getting the below error while using the JMS server.
<Sep 20, 2010 9:27:43 AM EDT> <Warning> <J2EE> <BEA-160064> <There was an error while making the initial connection to the JMS resource named EMSTopicFactoryNonXA from within an EJB or a servlet. The server will attempt the connection again later. The error was javax.jms.JMSException: [J2EE:160048]JNDI lookup of the JMS connection factory EMSTopicFactoryNonXA failed: javax.naming.AuthenticationException: Not permitted: invalid name or password [Root exception is javax.jms.JMSSecurityException: invalid name or password]>
<Sep 20, 2010 9:27:43 AM EDT> <Warning> <J2EE> <BEA-160082> <There was an error while making the initial connection to the JMS resource named com/lehman/fit/ice/agg2/TopicConnectionFactory from the EJB "Agg2BatchBean" inside application "Agg2". The server will attempt the connection again later. The error was javax.jms.JMSException: [J2EE:160048]JNDI lookup of the JMS connection factory com/lehman/fit/ice/agg2/TopicConnectionFactory failed: javax.naming.AuthenticationException: Not permitted: invalid name or password [Root exception is javax.jms.JMSSecurityException: invalid name or password]>
Note:-weblogic version 9.1sp0
Please suggest me how to resolve the above exception.<Sep 20, 2010 9:27:43 AM EDT> <Warning> <J2EE> <BEA-160064> <There was an error while making the initial connection to the JMS resource named EMSTopicFactoryNonXA from within an EJB or a servlet. The server will attempt the connection again later. The error was javax.jms.JMSException: [J2EE:160048]JNDI lookup of the JMS connection factory EMSTopicFactoryNonXA failed: javax.naming.AuthenticationException: Not permitted: invalid name or password [Root exception is javax.jms.JMSSecurityException: invalid name or password]>
<Sep 20, 2010 9:27:43 AM EDT> <Warning> <J2EE> <BEA-160082> <There was an error while making the initial connection to the JMS resource named com/lehman/fit/ice/agg2/TopicConnectionFactory from the EJB "Agg2BatchBean" inside application "Agg2". The server will attempt the connection again later. The error was javax.jms.JMSException: [J2EE:160048]JNDI lookup of the JMS connection factory com/lehman/fit/ice/agg2/TopicConnectionFactory failed: javax.naming.AuthenticationException: Not permitted: invalid name or password [Root exception is javax.jms.JMSSecurityException: invalid name or password]>
Note:-weblogic version 9.1sp0
Please suggest me how to resolve the above exception. -
Internal Assertion Error while using outer join
Hi-
Has anyone experienced this error before: State: HY000. Code: 397397248. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition !pConjunct->IsAndCond(), file server/Query/Optimizer/Request/Src/SQORToCNF.cpp, line 46. (HY000)
It happened after I changed the join in logical layer from inner join into left outer join from Fact Tab1 to Fact Tab2, This needs to be changed for cases:
Fact Tab1 contains:
Period|Currency|FX Rate
Mar-09|USD|1
Apr-09|USD|1.1
Fact Tab2 contains:
Period|Currency|Product|Profit
Mar-09|USD|Metal Abs|1000
Mar-09|USD|Grey Wood|2000
Expected Result:
Period|Currency|Product|Profit|FX Rate
Mar-09|USD|Metal Abs|1000|1
Mar-09|USD|Grey Wood|2000|1
Apr-09|USD|(NULL)|(NULL)|1.1
But, it shows the error as above (have changed the SERVER_THREAD_STACK_SIZE to 512 KB too but no luck, any idea?
Thanks,
WillHey Will,
Recently I've seen OBIEE generate some bad queries on an Oracle Database. I had setup a few time series measures and when I added more than three into a report, I got a table not found error. It turned out that it was a combination of the query getting very complex and the way it was using ANSI SQL Left Outer Join operator. I'm wondering if your situation is similar.
Can you try the following?
1. Log into the RPD and for your user, set the logging level to 7 (Manage->Security then find your user).
2. Clear all the caches (BI Server=Manage->Cache delete them all, Presentation Server=Settings->Manage Sessions then close all cursors)
3. Run the report for a date range that works fine
4. Run the report for a date range that causes the error.
5. Look at the physical SQL generated in the log files (Settings->Manage Sessions)
Compare the two queries and see if anything stands out. In fact try to execute both in SQL Developer or Toad and see if you get any errors. If you can, post the physical SQL and I might be able to notice something.
Just to confirm, you're using OCI to connect to an Oracle source right?
In my situation, I fixed it by disabling the LEFT OUTER JOIN syntax on the database. We might be able to get you to do something similar to fix your problem.
Thanks!
-Joe -
Server error while communicating to BI server
Hi,
There is a run time error while executing the Query in Bex Analyser while the same query is working fine in Portal..
*Cant paste the image here, but the error states -:
AN ERROR OCCURED WHILE COMMUNICATING WITH THE BI SERVER
As a result of this error, the system has been disconnected from the BI server.
Detailed Description:
System exception thrown while marshaling RFCTYPE_CHAR to .NET type*
I really dont know much about this as I am Basis Guy! Please suggest some actions from the Basis Point of view.
Regards!
Deep!HI,
Check if you have latest front end patch for your GUI and also make sure the .NET framework 2.0 is installed. This is needed for SAP BI7 BEx analyzer.
Also, take a look at this note 1013202.
Hope it helps.
Thanks,
KR -
Error: Internal Prising Error while using BAPI_PO_CREATE1
Hi Experts,
I am creating PO from Contract (VA41/VA42) using BAPI_PO_CREATE1 in user exit MV45AFZZ - USEREXIT_SAVE_DOCUMENT_PREPARE.
BAPI is returning the PO number and after coming out from BAPI. I am getting an popup message STOP - Internal Prising Error.
Even though bapi returned the PO number there is no PO exists with that number.
Please provide you valuable inputs.
Thanks & RegardsHi Experts,
I am creating PO from Contract (VA41/VA42) using BAPI_PO_CREATE1 in user exit MV45AFZZ - USEREXIT_SAVE_DOCUMENT_PREPARE.
BAPI is returning the PO number and after coming out from BAPI. I am getting an popup message STOP - Internal Prising Error.
Even though bapi returned the PO number there is no PO exists with that number.
Please provide you valuable inputs.
Thanks & Regards -
Dear Experts,
I am very critical situation due to this timeout error in ECC, please help me as much as you can. Go-live date is very near, but I am not getting any clue why this error is occurring. our ECC system is EHP 4, and PI is dual stack 7.4
My scenario is synchronous ABAP proxy to HTTP_AAE. request is triggering from ECC via proxy and reaching to third party (bank) through PI, I am reviving the response back in PI from bank. But from PI to ECC the response is not reaching. So in ECC after the defined Timeout limit its getting timed out.
I have tried everything by increasing the timeout in ECC more than 15 minutes in HTTP_TIMEOUT under SXMB_adm in ECC, but nothing worked, even if I am increasing for half an hour then also its getting timeout after half an hour.
response from bank to PI is coming within 30 to 40 seconds, but PI is not sending the response back to ECC.
This is classical scenario, and I have checked the trace via SXMB_Moni in PI as well as in ECC, in ECC its showing the timeout error, but in PI i did not see any trace for this error.
I have read many thread on SCN for the same error, and everywhere it has been suggested to increase the timeout, and I have tired that, it didn't help me.
All ABAP proxy configuration has been done as follows.
RFC destinations in ECC
LCRSAPRFC(TCP/IP)
SAPSLDAPI ((TCP/IP))
G type destination to path "/sap/xi/engine?type=entry"
G type destination SAP_PROXY_ESR to path "/rep"
All the destination connection test is working fine.
but i have a doubt on G type destination(AAE_XDJ) to path "/sap/xi/engine?type=entry" which is returns the status code 500 with message "Empty HTTP request received", is it ok with 500 ?
Configuration in ECC Integration Engine configuration is as follows
Questions
How the message gets pushed to ECC from PI, once the message received in PI, I believe by G type RFC destination on path "/sap/xi/engine?type=entry" , please clarify.
How to trace this, if message is not getting pushed to ECC, I mean I have checked the trace in PI XSMB_MONI, but didn't get anything for this error. In ECC SXMB_moni only I am able to the timeout error.
Please expert help me as soon as you can, this error really effecting me badly in front of management
Thanks,
FarhanHi Hareesh,
I configured the scenario based on ICO, and again I received the same timeout error in ECC.
I am really sick with this error, and I have raised the OSS message to SAP. Meanwhile I just want to double check my entire configuration with you. Please see the below configuration (for classical) for ABAP proxy to HTTP_AAE, and let me know if anything is wrong.
Request structure (ECC->PI->Bank)
<?xml version='1.0' ?>
<PaymentInfoMessage>
<PaymentInfoRequest>
<CompanyCode>Partner01</CompanyCode>
<BankCode>BSFRSARI</BankCode>
<StartDate>2006-07-09T00:00:00</StartDate>
<EndDate>2006-07-09T00:00:00</EndDate>
<TransactionType>940</TransactionType>
</PaymentInfoRequest>
</PaymentInfoMessage>
Response Structure (Bank->PI->ECC)
<?xml version="1.0"?>
<PaymentInfoMessageResponse>
<PaymentInfoResponse>
<TransactionType>940</TransactionType>
<SequenceNum>1</SequenceNum>
<ReceiptTime>2002-01-02T18:01:00</ReceiptTime>
<ProcessStatus>1</ProcessStatus>
<Comment>No Comment</Comment>
<TransactionData>:20:MT940-1007200601
:25:3210000079901
:28C:190/0001
</TransactionData>
<CompanyCode>PARTNER01</CompanyCode>
</PaymentInfoResponse>
<StatusCode>OK</StatusCode>
<StatusDetail>OK</StatusDetail>
<ResponseItemCount>2</ResponseItemCount>
</PaymentInfoMessageResponse>
ESR Configuration
Please see the below screenshot for ESR config. I have created 4 data types, 4 message types, 2 Service interface (synchronous), 2 mapping and one operation mapping.
I just want to clarify about selecting the Request and response message type in inbound and outbound service interface.
<?xml version='1.0' ?>
<PaymentInfoMessage>
<PaymentInfoRequest>
<CompanyCode>Partner01</CompanyCode>
<BankCode>BSFRSARI</BankCode>
<StartDate>2006-07-09T00:00:00</StartDate>
<EndDate>2006-07-09T00:00:00</EndDate>
<TransactionType>940</TransactionType>
</PaymentInfoRequest>
</PaymentInfoMessage>
Response Structure (Bank->PI->ECC)
<?xml version="1.0"?>
<PaymentInfoMessageResponse>
<PaymentInfoResponse>
<TransactionType>940</TransactionType>
<SequenceNum>1</SequenceNum>
<ReceiptTime>2002-01-02T18:01:00</ReceiptTime>
<ProcessStatus>1</ProcessStatus>
<Comment>No Comment</Comment>
<TransactionData>:20:MT940-1007200601
:25:3210000079901
:28C:190/0001
</TransactionData>
<CompanyCode>PARTNER01</CompanyCode>
</PaymentInfoResponse>
<StatusCode>OK</StatusCode>
<StatusDetail>OK</StatusDetail>
<ResponseItemCount>2</ResponseItemCount>
</PaymentInfoMessageResponse>
ESR Configuration
I have simply created 2 data types for requests(ECC->PI->Bank) and did one to one mapping. Similarly for response(Bank->PI->ECC) 2 data types, one to one mapping for this as well.
But I just want to clarify about selecting the Request and response message type in inbound and outbound service interface. please explain me this for synchronous interface.
Please see the below structure from ESR and inbound and Outbound service and let me know if the selection of Request and response message types is correct or not.
OutBound service interface
Inbound service interface
Thanks,
Farhan -
HTTP 500 Error while using XML HTTP Port for idoc
Hi,
I am trying to send CRM idocs via XML Http instead of usual t-rfc.
After standard idoc - pi configs i get the below error.
transferring the IDoc by HTTP, the return code with the message '500Error during parsing of SOAP header' has occurred.
In BD87 I get the below error.
The target address was: http://yyyyyy.XXX.local:800X/sap/xi/engine?type=entry
I get the http 500 error as:-
Check whether the IDoc can be sent again.
It is unfortunately not possible to determine automatically whether the IDoc has in fact arrived in the target system and the error occurred afterwards
Any idea on how to trouble shoot or resolve this.
Regards,
AnirbanHi Anirban,
Follow the below links for troubleshooting.
Troubleshooting File-to-IDOC Scenario in XI.
The specified item was not found.
Regards,
Leela -
500 Internal server error while running sqlsrv_query in PHP
Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help.
I am running a query through php:
$ls_parcel_query = "select * from ParcelDetail order by ExtractDate";
$result = sqlsrv_query($conn, $ls_parcel_query, array(), array("Scrollable"=>"keyset","QueryTimeout"=>300));
$no_of_rows = sqlsrv_num_rows($result);
echo "<br/>".$no_of_rows;
It gives (After 30 seconds):
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
I have php.ini settings like below:
max_execution_time = 90
memory_limit = 128M
While running this query in SQL SERVER 2008 R2, it successfully gives result in some times in 1 minute and sometimes in 2 minutes.Hello,
A 500 Error will be caused due to many reason.To troubleshooting this issue, you can try to check out the error log and get more information on what is causing the error.
Reference :
"500 Internal Server Error" while running PHP
HTTP Error 500 Internal server for php pages and solution
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
OAF :500 internal server error while runnning the create page
hi friends
i am 500 internal server error while runnning the create page,but i can able to run some other pages like query page
please give ur suggesion to solve my problem
500 Internal Server Error
java.lang.NoSuchMethodError: oracle.apps.fnd.framework.webui.OAAboutUtils.setPageInError(Ljavax/servlet/http/HttpSession;)V
at OAErrorPage.jspService(OAErrorPage.jsp:11)
[SRC:/OAErrorPage.jsp]
at com.orionserver[Oracle9iAS (9.0.3.1.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle9iAS (9.0.3.1.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind[Oracle9iAS (9.0.3.1.0) Containers for J2EE].server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:119)
at com.evermind[Oracle9iAS (9.0.3.1.0) Containers for J2EE].server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:547)
at com.evermind[Oracle9iAS (9.0.3.1.0) Containers for J2EE].server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:518)
at OA.jspService(OA.jsp:35)
[SRC:/OA.jsp]
at com.orionserver[Oracle9iAS (9.0.3.1.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle9iAS (9.0.3.1.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind[Oracle9iAS (9.0.3.1.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind[Oracle9iAS (9.0.3.1.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind[Oracle9iAS (9.0.3.1.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind[Oracle9iAS (9.0.3.1.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)Thilib
Please verify that your project settings for all projects show the following:
J2EE Web Application Name: APPS_HTML J2EE
Web Context Root: /OA_HTML
Note that these values are new for an OA project with JRAD 9.0.3.7 (verify that you are using an OA project).
If that doesn't fix the problem, try deleting your System directory and restarting.
Thanks
AJ -
Getting 500 Internal Server Error while tryig to log into freshly upgraded
Hi
Getting 500 Internal Server Error while tryig to log into freshly R12 upgraded.
Below is the application.log messages.
=================================================================================================
12/12/31 10:02:22.295 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:41)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:71)
at java.nio.channels.Channels.access$000(Channels.java:58)
at java.nio.channels.Channels$1.write(Channels.java:145)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:735)
13/01/01 23:22:07.988 html: Servlet error
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.lang.RuntimeException: oracle.apps.fnd.common.AppsException: java.sql.SQLException: The Network Adapter could not establish the connection;
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912)
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:886)
at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:1017)
at oracle.apps.fnd.framework.OACommonUtils.processAOLJErrorStack(OACommonUtils.java:901)
at oracle.apps.fnd.framework.webui.OAServerDelegate.releaseWebAppsContext(OAServerDelegate.java:1823)
at oracle.apps.fnd.framework.webui.OAJSPHelper.handleErrorStackDisplay(OAJSPHelper.java:1455)
at OAErrorPage.jspService(_OAErrorPage.java:257)
13/01/01 23:41:46.338 html: Error initializing servlet
java.lang.NoClassDefFoundError: oracle.apps.fnd.sso.Utils (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:140)
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:221)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:287)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2978)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:738)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:735)
Caused by: java.lang.ExceptionInInitializerError
at java.lang.J9VMInternals.initialize(J9VMInternals.java:222)
at oracle.apps.fnd.sso.Utils.<clinit>(Utils.java:674)
at java.lang.J9VMInternals.initializeImpl(Native Method)
=================================================================================================
Current workaround is bouncing the oacore services.
Already raised the SR with Oracle.
Oracle support analyst suggesting to upgrade the JDK version from SR2 to SR11 or higher to fix this issue.
Please let us know any other tips to fix this issue.
Regards,
JagadeeshaHi,
I have gone through the docs. , not use full. Please find the inline comments for the same.
E-Business Suite Users Experience Intermittent HTTP-500 Errors and Database Connection Errors [ID 1314433.1] -- No solution
R12: Http Server Crashing Frequently With Segmentation Fault (NAS or SAN filesystem) [ID 732857.1] -- Already it is under local file system only.
How to resolve Broken Pipe errors in E-Business Suite R12 ? [ID 1480156.1] -- No solution
Autoconfig is completed wihtout any errors.
I have not chedked the database log file. I will check and update you soon.
Cheers,
Jagadeesha -
Internal server error while trying to link Facebook to Toshiba Places
I'm seeking for help regarding an issue i encountered while using my toshiba SMART tv. I'm unable to link my facebook account to my toshiba places account, it shows "Internal server error" while trying to link via the link given in the instruction in the email i received.
Can anyone please help?*@ACE-*
In you case I would recommend checking for new firmware update and after the firmware update, the TV should be reset to the default settings.
Firmware can be found here: http://www.toshiba-om.net/
Maybe you are looking for
-
How can I share a folder between two users on the same iMac?
I have an iMac with 2 user accounts and I want to share a folder between them. I have gone on to system preferences>sharing and turned on file sharing. I have also got the 'Get Info' thing up, selected 'Shared Folder' and added the other user to the
-
Can't save emailed photos to iPhoto
The computer is an iBook G3, 900 MHz, 40 GB hard drive running OS X v.10.4.11 with Mail 2 and iPhoto 2. This is a computer which I am trying to set up for a friend. I recently posted a similar question in the iPhoto forum thinking the problem might b
-
I have video files on my cpu & I put them in my library, I then converted them & sync them to iPod but when I go to play the video on the iPod there is no volumn can someone please help A.S.A.P.????!!!!?!?!!?!
-
Automator reverses numerical order of file names
I am using Automator to rename a series of audio files ("Get specified finder items" then "rename finder items"), and make them sequential ("add number to new name". When the script runs the order of files are reversed. The last shall be first and th
-
Hi, My database is 9.2.0.7 running on HP_UX Itanium.... my redolog size is 100MB and for a day on overage there are 10 archive logs are getting generated. I want to make redo log switch frequently say for every 30 mins like that... I have been going