Server failed to run - Reason:Server is not in the majority cluster partition

Hi,
my environment is Weblogic 12.1.2.
The deployment configuration is: cluster, 2 machines, 2 managed servers, 1 data source, and JMS (with uniform distributed queue).
When I'm starting the admin server + managed server on the first machine (using the node manager), while on the second machine the managed server and also the node manager are not running, the server failed to run and the error reason is : "Server is not in the majority cluster partition".
How can I enforce the server to run even if the second one is not running ? This scenario could occured because of some local problems on the second machine. My expectation is that after the second will running the whole cluster status will be good.
Thanks,
Yaakov

Hi,
Just to remember the configuration: 2 managed servers configured as cluster that should be deployed on 2 different machine.
Following summary of the tests:
     - node manager + admin server + 1 managed server running on the first machine --> server failed to init with error "Server is not in the majority cluster partition"
     - node manager + admin server + 2 managed servers running on the one machine --> servers are running without errors
     - node manager + admin server + 1 managed server running on the first machine / node manager runs on the second machine --> server on the first machine runs without errors without the famous error ' Server is not in the majority cluster partition'.
Bottom line, seems that if the node manager is not running on the remote machine, the cluster is not in a stable state and so the single managed server failed to initialize.
Is it according the documentation / expectations ?
Thanks,
Yaakov

Similar Messages

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

Message says: "can not get mail, the connection to the server failed" . Now I'm confused because all the mail shows up perfectly.

I just upgraded to the 5s. I have several mail accounts and I'm getting a message that says: "can not get mail, the connection to the server failed" . Now I'm confused because all the mail shows up perfectly.

Well it does it every time I go to mail and is driving me nuts. It never happened on my iPhone5, just on this 5s.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

SDM Deployment Failed--SDM could not start the J2EE cluster on the DB Host

HI,
I am trying to deploy ESS packges in EP through SDM.But while deploying I am getting this error in SDM at the start itself:-
Error: An error occured while starting a cluster instance.
Oct 14, 2008 5:14:41 PM Error: There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage
Please check if there is an appropriate running cluster instances
SDM could not start the J2EE cluster on the host SBPEPDB1! The online deployment is terminated.
There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage
I am pasting the full LOG File details:-
Oct 14, 2008 6:32:00 PM Info: Starting cluster instance processes.
Oct 14, 2008 6:32:00 PM Error: An error occured while starting a cluster instance.
Oct 14, 2008 6:32:00 PM Error: There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage . The instances, returned by MessageServer [MS host: SBPEPCI1; MS port: 3900], are :
Name:JM_T1223989073901_0_CPCAPP109
Host:SBPEPCI1
State:5
HostAddress:172.17.131.38
Name:JC_CPCAPP109_EPP_01
Host:CPCAPP109
State:5
HostAddress:172.17.131.31
Please check if there is an appropriate running cluster instances.
Oct 14, 2008 6:32:00 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Oct 14, 2008 6:32:00 PM Error: Aborted: development component 'pcui_gp/isr/cfg'/'sap.com'/'MAIN_ERP05VAL_C'/'2515722'/'0', grouped by software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0':
SDM could not start the J2EE cluster on the host SBPEPDB1! The online deployment is terminated.
There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage .
The instances, returned by MessageServer [MS host: SBPEPCI1; MS port: 3900], are :
Name:JM_T1223989073901_0_CPCAPP109
Host:SBPEPCI1
State:5
HostAddress:172.17.131.38
Name:JC_CPCAPP109_EPP_01
Host:CPCAPP109
State:5
HostAddress:172.17.131.31
Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Oct 14, 2008 6:32:04 PM Info: Starting to save the repository
Oct 14, 2008 6:32:05 PM Info: Finished saving the repository
Oct 14, 2008 6:32:07 PM Info: Starting: Initial deployment: Selected software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0' will be deployed.
Oct 14, 2008 6:32:07 PM Error: Aborted: software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0':
Failed deployment of SDAs:
development component 'pcui_gp/isr/cfg'/'sap.com'/'MAIN_ERP05VAL_C'/'2515722'/'0' : aborted
Please, look at error logs above for more information!
I have checked the CONFIGTOOl and the properties seem to be OK.
I tried SHUTTING DOWN all APPLICATION servers & Restarting the DEPLOYMENT,but it still Failed
Pls suggest.
Regards,
Abhijeet
I

Hi George,
Thnx for your reply.
I have stopped all Application servers and kept only the CI-DB instances running.Retried deploying the ESS packages but still getting the same error.
Have checked the Visual admin,it is not in SAFE mode,it working normally.
Have alos checked the CLUSTER Manager Property Values in both Visual Admin & Config Tool,they are alright.
About the Cluster Resources,can you pls specify what exactly do you mean by "Cluster Resources are running or not".
I think if the application servers are stopped,then the Cluster resources shudnt come into play right?? Correct me if I am wrong.
Kindly suggest what other steps I shud take.
Regards,
Abhijeet

TS1362 When I purchased a song on itunes, for some reason it did not download the whole song. How can I re-download the song without having to re-pay?

When I purchased a song on itunes, for some reason it did not download the whole song. It quits about 1 and 1/2 minutes through the song. Is there a way I can re-download the song without re-paying for it?

were you able to solve this problem??

Scheduled refresh - Test connections settings validation failed: one or more connections did not pass the test

I copied a workbook that has a working scheduled refresh
modified the data model, added some new reports
added a new source (PQ from azure market place)
uploaded workbook to new powerbi location.
get the following error when i try to turn on scheduled refresh - this is even if i just select one data source that is still identical to the original (working) workbook
Test connections settings validation failed: one or more connections did not pass the test
Technical Details ▼
Correlation ID: ddcab6b8-ff2c-4881-9d8e-eeabbd23dff2
Date and Time: 12/12/2014 06:13:06 AM (UTC)
what's the problem?
Jakub @ Adelaide, Australia Blog

Still a problem and not just for me but other users going by the threads on here...
https://social.technet.microsoft.com/Forums/en-US/eb8682f4-9b40-456a-a7f1-45627a0f4ff0/cannot-schedule-refresh?forum=powerbiforoffice365#eb8682f4-9b40-456a-a7f1-45627a0f4ff0
Applies to all worksheets that utilise a PQ connection registered in the gateway. (my gateway is on an azure VM)
Existing worksheets receive this warning. New workbooks that utilise these connections also receive this warning
Adding a new PQ to the gateway and a new workbook that uses the new connection also receives this warning.
Every PQ connection I have receives this warning. My PQ connections are all to web resources. Most are to the workflowmax.com API, and one is to the Azure Marketplace to retrieve data for a date dimension.
Note: this does not prevent me from scheduling or triggering a refresh, and the refresh itself completes successfully. It's just a weird warning that caused confusion as it sounds like the actual refresh will fail as well seeing as the connection test failed.
Jakub @ Adelaide, Australia Blog

For some reason I cannot uptade Modern Combat 4, every time I try upgrading an error message appears saying you cannot uptade since you do not own the major version of this software. I need to uptade to play online, any help would be appreciated.

For some reason I cannot uptade Modern Combat 4, every time I try upgrading an error message appears saying you cannot uptade since you do not own the major version of this software. I need to uptade to play online, any help would be appreciated.

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

WHEN I CONNECT, THROUGH USB CABLE, MY IPHONE TO THE MAC BOOK PRO, THE ITUNES APP STOP RUNNING AND I CAN NOT SYNCRONIZE THE IPHONE

I have an iphone 4, iOS 7.1.2
Mac book pro 13in Mid 2012, with OS X VERSION 10.9.4, Processor speed 2.9 Ghz, Memory 8GB 1600MHz DDR3, Intel core i7, Storage capacity 750 GB, 650 GB available.
WHEN I CONNECT, THROUGH USB CABLE, MY IPHONE TO THE MAC BOOK PRO, THE ITUNES APP STOP RUNNING AND I CAN NOT SYNCRONIZE THE IPHONE.

Hello skkmmayer,
That is probably a lot of stuff you do not want on your iPhone. So this can be handled a few different was. For you current situation, you can delete the apps directly on your iPhone by holding on the app until it starts to jiggle and then tap on the X of all the apps that you do not want. The second thing you can do is before you sync with iTunes, look at the app section on your iPhone to know what gets transfer to it and you can deselect items that you do not want. Lastly, if you download content on your iPad and it is a universal app, you can actually download it directly to your iPhone by looking at your past purchases and download it directly from the App Store. Check out the articles below for more information if need further assistance.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
iTunes 11 for Mac: Sync and organize iOS apps
http://support.apple.com/kb/PH12115
Download past purchases
http://support.apple.com/kb/HT2519
Regards,
-Norm G.

Problem with deploying : SDM could not start the J2EE cluster on the host .

Hello, All
I have following problem with deploying the aplication I get this messenger:
16/09/2008 07:59:44 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : 192.168.0.14
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/PENITU1/LOCALS~1/Temp/temp47114ZChangeRequestDatabase.ear
Result
=> deployment aborted : file:/C:/DOCUME1/PENITU1/LOCALS~1/Temp/temp47114ZChangeRequestDatabase.ear
Aborted: development component 'ZChangeRequestDatabase'/'local'/'LOKAL'/'0.2008.05.03.04.24.17'/'0':
SDM could not start the J2EE cluster on the host Jupiter! The online deployment is terminated. There is no cluster control instance running on host Jupiter which is described in SecureStorage . The instances, returned by MessageServer [MS host: Jupiter; MS port: 3901], are :|Name:JM_T1221612526745_0_penitus15 |Host:PENITUS15 |State:5|HostAddress:192.168.0.205||Name:JM_T1221612357814_0_Jupiter |Host:pfs |State:5|HostAddress:192.168.0.14||Name:JC_Jupiter_JTP_00 |Host:pfs |State:5|HostAddress:192.168.0.14|Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Deployment exception : The deployment of at least one item aborted
I dont'n know How do I solver this error?
- I reviewed the virtual memory and I increase the virtual memory
- I restarted the server and the system
- I reviwed the parameter in the config tool --> cluster --> security storage it is OK
Any suggestion for solver this problem
Thanks
Regards
DS

I found this messenger in Additional log information., Please si
17/09/2008 03:04:51 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[004]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[C:\usr\sap\JTP\JC00\SDM\program\log\sdmcl20080917200328.log]/>
<!PATTERN[sdmcl20080917200328.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
Sep 17, 2008 1:04:40 PM Info: -
Starting deployment -
Sep 17, 2008 1:04:40 PM Info: Error handling strategy: OnErrorStop
Sep 17, 2008 1:04:40 PM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
Sep 17, 2008 1:04:40 PM Info: Update strategy: UpdateAllVersions
Sep 17, 2008 1:04:40 PM Info: Starting deployment prerequisites:
Sep 17, 2008 1:04:40 PM Info: Loading selected archives...
Sep 17, 2008 1:04:40 PM Info: Loading archive 'C:\usr\sap\JTP\JC00\SDM\program\temp\temp62604ZIssueDatabase.ear'
Sep 17, 2008 1:04:41 PM Info: Selected archives successfully loaded.
Sep 17, 2008 1:04:41 PM Info: Actions per selected component:
Sep 17, 2008 1:04:41 PM Info: Initial deployment: Selected development component 'ZIssueDatabase'/'local'/'LOKAL'/'0.2008.04.17.10.53.03'/'0' will be deployed.
Sep 17, 2008 1:04:41 PM Info: Ending deployment prerequisites. All items are correct.
Sep 17, 2008 1:04:43 PM Error: Unable to compare host[Jupiter] and host[PENITUS15] Throwable: java.net.UnknownHostException Throwable message: PENITUS15: PENITUS15
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs: pfs
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Info: Saved current Engine state.
Sep 17, 2008 1:04:45 PM Info: Starting: Initial deployment: Selected development component 'ZIssueDatabase'/'local'/'LOKAL'/'0.2008.04.17.10.53.03'/'0' will be deployed.
Sep 17, 2008 1:04:45 PM Info: SDA to be deployed: C:\usr\sap\JTP\JC00\SDM\root\origin\local\ZIssueDatabase\LOKAL\0\0.2008.04.17.10.53.03\temp62604ZIssueDatabase.ear
Sep 17, 2008 1:04:45 PM Info: Software type of SDA: J2EE
Sep 17, 2008 1:04:45 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[PENITUS15] Throwable: java.net.UnknownHostException Throwable message: PENITUS15
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Info: Starting cluster instance processes.
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[PENITUS15] Throwable: java.net.UnknownHostException Throwable message: PENITUS15
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Error: Unable to compare host[Jupiter] and host[pfs] Throwable: java.net.UnknownHostException Throwable message: pfs
Sep 17, 2008 1:04:45 PM Error: An error occured while starting a cluster instance.
Sep 17, 2008 1:04:45 PM Error: There is no clutser control instance running on host Jupiter which is described in SecureStorage .
The instances, returned by MessageServer [MS host: Jupiter; MS port: 3901], are :
Name:JM_T1221672404781_2_penitus15
Host:PENITUS15
State:5
HostAddress:192.168.0.215
Name:JM_T1221679486171_0_Jupiter
Host:pfs
State:5
HostAddress:192.168.0.14
Name:JC_Jupiter_JTP_00
Host:pfs
State:5
HostAddress:192.168.0.14
Please check if there is an appropriate running cluster instances.
Sep 17, 2008 1:04:45 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Sep 17, 2008 1:04:45 PM Error: Aborted: development component 'ZIssueDatabase'/'local'/'LOKAL'/'0.2008.04.17.10.53.03'/'0':
SDM could not start the J2EE cluster on the host Jupiter! The online deployment is terminated.
There is no clutser control instance running on host Jupiter which is described in SecureStorage .
The instances, returned by MessageServer [MS host: Jupiter; MS port: 3901], are :
Name:JM_T1221672404781_2_penitus15
Host:PENITUS15
State:5
HostAddress:192.168.0.215
Name:JM_T1221679486171_0_Jupiter
Host:pfs
State:5
HostAddress:192.168.0.14
Name:JC_Jupiter_JTP_00
Host:pfs
State:5
HostAddress:192.168.0.14
Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Sep 17, 2008 1:04:45 PM Info: Starting to save the repository
Sep 17, 2008 1:04:46 PM Info: Finished saving the repository
Sep 17, 2008 1:04:47 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Sep 17, 2008 1:04:47 PM Error: -
At least one of the Deployments failed -
Any help will be well received about this problema
Thk
Regards
DS

Deployment SDM could not start the J2EE Cluster on the host nw4host

Hello,
I installed the WAS testdrive on Linux SUSE 9.3 and the SNDS on WinXP.
I am trying to deploy the welcome application from the SNDS and get the following error message:
SDM could not start the J2ee Cluster on the host nw4host! The online deployment is terminated. JStartup Framework ist not able to deliver an information about the cluster control instances! Please check the status of the J2EE Engine.
I can start the J2EE Start page on port 50000, the system info shows that dispatcher, server0 and SDM are running. I can start the visual admin with go, the SDM with RemoteGui and the DeployTool.
The comand startsap check nw4host shows, everythings running:
nw4host:nw4adm 54> startsap check nw4host
Checking ADA db Database
ABAP Database is running
Checking ADA db Database
J2EE Database is running
See logfile JdbcCon.log
Checking SAP NW4 Instance SCS01
Instance SCS01 is running
Checking SAP NW4 Instance DVEBMGS00
Instance DVEBMGS00 is running
Logging in to SAP with the Java Gui, the ICM says:
ABAP Server operational        = TRUE
J2EE Server configured         = FALSE
J2EE HTTP port                 = 50000
J2EE HTTPS port                = 50001
J2EE Server operational        = TRUE
Default root access handler    = ABAP
URL Prefix Table loaded        = TRUE
Any idea where the problem could be ?
Thanks, Manfred.

changed the ip address for nw4host in etc/hosts to the real ip address of the server where application runs

NW4: SDM could not start the J2EE cluster on the host nw4host

Hello,
in NW4 i get this error when i try to deploy the welcome webdynpro:
SDM could not start the J2EE cluster on the host nw4host! The online deployment is terminated. JStartup Framework is not able to deliver an information about the cluster control instances! Please check the status of the J2EE Engine.
I am using NW4 (built 28.9.04) on Suse 9.0 and the corresponding IDE (2.04) on Windows 2000.
In the J2EE view of the IDE everything (SDM, Dispatcher and Server) is green. I can start the examples on port 50000. According to systeminfo everything is running.
I searched in OSS and found Note 738402. But there is no EOF in the SDM-logfile. And when i started the J2EE-Configtool the value for "admin/host/SID" is not localhost.
Any hints?
Regards,
Nico.

Hello,
> Developer Studio -> Preferences -> SAP J2EE Engine ?
of course. Every icon (SDM, Dispatcher and server) is green in the J22E-View of the IDE. I still get this error message.
Regards,
Nico.

SDM could not start the J2EE cluster on the host Error on Deployments

Hi,
We are sudenly getting this Error when trying to make a Deployment in the NWDE:
Settings
SDM host : 10.26.26.198
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/ALMA1.CAR/LOCALS~1/Temp/temp49346WDWFApp.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ALMA1.CAR/LOCALS~1/Temp/temp49346WDWFApp.ear
Aborted: development component 'WDWFApp'/'local'/'LOKAL'/'0.2007.02.16.15.11.28'/'0':SDM could not start the J2EE cluster on the host vmxtbcsapep01! The online deployment is terminated. There is no clutser control instance running on host vmxtbcsapep01 which is described in SecureStorage . The instances, returned by MessageServer [MS host: vmxtbcsapep01; MS port: 3901], are :|Name:JM_T1171660289517_0_ALMACARVAJAL |Host:miriamdragustinovis |State:5|HostAddress:10.21.69.164||Name:JM_T1171656308064_0_vmxtbcsapep01 |Host:cvespinosa |State:5|HostAddress:10.26.26.198||Name:JC_vmxtbcsapep01_CPQ_00 |Host:cvespinosa |State:5|HostAddress:10.26.26.198|Please check if there is an appropriate running cluster instances. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Deployment exception : The deployment of at least one item aborted
And in the sdm log file we got this kind of errors:
Feb 16, 2007 2:13:46 PM Error: Unable to compare host[vmxtbcsapep01] and host[miriamdragustinovis] Throwable: java.net.UnknownHostException Throwable message: miriamdragustinovis
Feb 16, 2007 2:13:46 PM Error: Unable to compare host[vmxtbcsapep01] and host[cvespinosa] Throwable: java.net.UnknownHostException Throwable message: cvespinosa
Feb 16, 2007 2:13:46 PM Error: Unable to compare host[vmxtbcsapep01] and host[cvespinosa] Throwable: java.net.UnknownHostException Throwable message: cvespinosa
Feb 16, 2007 2:13:46 PM Error: An error occured while starting a cluster instance.
Feb 16, 2007 2:13:46 PM Error: There is no clutser control instance running on host vmxtbcsapep01 which is described in SecureStorage .
The instances, returned by MessageServer [MS host: vmxtbcsapep01; MS port: 3901], are :
Name:JM_T1171656916610_0_ALMACARVAJAL
Host:miriamdragustinovis
State:5
HostAddress:10.21.69.164
Name:JM_T1171656308064_0_vmxtbcsapep01
Host:cvespinosa
State:5
HostAddress:10.26.26.198
Name:JC_vmxtbcsapep01_CPQ_00
Host:cvespinosa
State:5
HostAddress:10.26.26.198
Any Idea what can be wrong? we have even restarted de AIX Server and starting all the services and it is still not working.
Thanx in Advanced!
Gerardo J

Hi Gerardo,
I encountered exactly the same error, but had a different solution as I was expecting from the error-message.
In my case I was forced by the Visual Administrator to change the administration password, since the time was up on it. But as the password for the Visual Administrator is saved within the database, the password for the SDM is stored within the secure store (file-system) and changing the password just in VA will not automatically change it also in the secure store. But since both passwords for the internal usage need to be equalized, I encountered problems afterwards when trying to deploy something and I got the same error message. However the sense of restriction is meant here, the solution on it was rather simple as follows (Just note that you need to enter a dummy-password first, before setting the correct one similar to your visual administrator):
1. create a telnet session to your J2EE using a command line shell
2. enter "jump 0" to get on the correct node within your J2EE
3. enter "add user" to gain access to user-specific commands
4. enter "password <Administrator> <temporarily new password>"
5. exit
6. create another telnet session to your J2EE using a command line shell
7. after succeeded the login, you will now be forced to enter a new password - so enter "password <Administrator> <origin password of the Visual Administrator>"
8. exit
9. now start the config-tool of the engine
10. apply to the DB-default-question with "yes"
11. select the Secure Store on the left
12. select the entry "admin/password/..." that you can see it in the bottom lines.
13. click "Remove" to delete it from the list
14. set the password similar to the Visual Administrator password within the "Value" line (take care as you can not see the digits).
15. click "Add" to add it back to the list
16. click the disc symbol in the top of the UI to save the new password (if you don't get a dialog afterwards that the data has been stored, something may hasn't worked fine when removing/adding the password-entry, in this case repeat the action on it).
17. After exiting the config-tool, you need to restart the entire J2EE.
18. Your hopefully finished by success ;o))
Best regards
Jochen

You can not update this software since you have not owned the major version of this software.??

I have recently been having issues signing into my Apple ID and decided to go in and update my email and change my password.
Since changing my email and password I have been unable to update any of my apps. I receive this error message when trying to update, "You can not update this software since you have not owned the major version of this software."
I have looked into other forums and communities for a solution to this issue but from what I have read iTunes/Apple has yet to figure out a solution.
I have also read that the cause of this issue can be linked to two things.
One, is if you have multiple accounts on one computer. I only have one iTunes account/ Apple ID on this computer. This is my personal laptop and no one else has ever loaded on another account.
The second cause is linked to the country to which the apps were downloaded in. My computer and Apple ID were both created in the US, however 9 months ago I moved to New Zealand on a one year work holiday visa. Since living in New Zealand for the past 9 months I have been buying and updating apps, it wasn't until today when I received this error message.
I would really like to find a solution to this problem, but at the very least I would like to know what exactly caused this issue so that others may hopefully steer clear.
Any help would be much appreciated!
Cheers.

I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update.

"you have not owned the major version of this software"

I can not update my iPhoto because it coming back with "you have not owned the major version of this software"
Help

Welcome to the Apple Support Communities
To update iPhoto to the latest version, open  > Software Update.
If it says that you are running the latest version, open iPhoto, go to iPhoto menu > About iPhoto, and tell us what iPhoto version you are using. You may want to install an update for iPhoto '11 and you are running an older version

Server failed to run - Reason:Server is not in the majority cluster partition

Similar Messages

Maybe you are looking for