Server shows as IP rather than name

Hi - just setup a new Leopard 10.5.8 server install, went through things carefully in setting up server, DNS, etc. Tests to check the DNS come back as correct. In Server Admin, under available servers, this server still shows as it's IP number and not it's server name. I seem to recall that the name should show as one is going through the setup and not the IP. Things appear to be working OK. Is this OK/correct? TIA - Lewis

Caller ID problema are usually cuased by duplication of numbres in your Contacts. Have a look at this link for solutions.

Similar Messages

  • Can you set live bookmarks to show topic replies rather than new topics (or is that a setting of the site/forum)?

    I have live bookmarks for some forums, blogs, and news pages on my bookmarks toolbar and only one site shows topic replies rather than new topics in the dropdown bar. Can I configure the forum ones to show topic replies or is that a setting configured by the website itself?

    Nope. This is a common request, for some form of preview, typically as Outlook does it. Almost equally common are requests to have absolutely no preview whatsoever in case something nasty happens.
    Many of us think the Message Pane below the thread list is perfectly adequate for a quick scan of message content.

  • CONTACT NUMERS RATHER THAN NAMES APPEAR WHEN CALL IS RECEIVED

    Contact number rather than name just starting appearing on screen when call is received.  Downloaded pictures from phone to computer yesterday.

    The contact in which the photo does appear (along with the contact's name as well) is one that I added myself. I have photos added for many of the people in my Contact List, but neither their photo nor their name appears to me whenever they call or text me.
    I know how to add a photo to a contact's information within my Contact List. I need to know how I can make that photo (or even the contact's name) appear whenever I have an incoming call/text from them. What I am seeing is just their phone number, and I do not know everyone's phone number well enough to recognize from whom I am getting a call/text. It would be much easy if their photo or name appeared instead.
    TYSM for your speedy reply to my query, but the information that you have provided does not solve my issue.

  • Since update to 5.0.1 iphone contacts caller id shows email address rather than contact name and number

    Since i upgraded to 5.0.1 . My iphone contacts caller id shows email address not contact name and number. Is this a settings issue?

    Hi, it's maybe happening the same here!
    I have an iphone 3gs. Since I did the upgrade to ios5, when I receive an sms with the notification of a missed call I am no longer able to see if it's coming from a number of my contact list, because in the sms the message correspondence for that contact underlines now the number PLUS the first 2 cifres of the date! So the number results always being 2 numbers longer and it's impossible get to the original.
    That's really a major problem for me, as I'm no longer able to know who has called me, if someone I know (and who) or if a new number.
    I add a capture to explain it better (I have banned a couple of cifres for privacy reasons).
    Anyone solved the problem or can help please?
    Thank you!

  • Can 'track list' button show your playlist rather than album track list?

    Hi all
    My 3GS iPhone has my music on it in the form of whole albums which live in individual playlists on my Mac, but I also have playlist 'mixes' which I've created from various songs from multiple albums.
    When selecting to play a 'mixed' playlist on my iPhone I tap on it, tap the first song to start the music playing, but then if I tap the top right 'track list' button, instead of showing all the tracks in my created playlist it just shows the entire album tracks from where this particular song has come from. Visually I prefer the 'track list' screen but it seems I can't use it if I'm playing a 'mixed' playlist. Is there any way around this?
    Also, this is the same if I have a double CD album: once I hit the 'track list' button it shows just CD 1 (or 2 if I'm further down the play list of course), rather than all the tracks even though on they all live in one single playlist on my iTunes. I've even taken the starts of the track names off (some of them start with '1_01 Song Title' for example) when importing them into iTunes to see if that helps but it doesn't: the iPhone KNOWS how that track was originally supplied!
    Any help or clarification on this would be very helpful!
    Markos

    sadly, that kind of customization is only easily doable on a computer. the iPhone and it's core apps can not be changed by users. you can request the feature be put in, but unless there are a LOT of requests, you shouldn't get your hopes up as there are a lot of these kinds of requests, and by implementing it, how many other users would be angry and demand it be changed back? http://www.apple.com/feedback/
    if you are playing a song that you selected in a playlist, you should be able to hit the 'back' button in the top left to go back to the playlist and view your songs in the playlist.
    in regards to the 'cd 1 of 2' thing, you will need to change your song info to get this to show in the format you want. to see the song info, select a song and go to 'file -> get info'. that will show you all of the ID3 tag information, which you can edit to do whatever you want.

  • Cell calculations showing header text rather than data

    This has to be simple, but I am stumped.
    I have added header text to a SS.  Now when I attempt to add a calculation to a cell in the SS Numbers is showing the text in the calculation rather than the cell data or cell location.
    How do I stop this?  Just want to see something like this:  =F13-(E13*4)
    but I get this
    =On Hand Now test line-(Monthly Average test line*Cal. 212 West Jackson Street)
    Numbers does put the the correct numeric result in the proper cell but I don't want to see the above.
    Tim

    select the menu item "Numbers > Preferences" then uncheck the box "Use header cell names as references":

  • TS3899 How do I check to see if the problem resides on the server (e.g., the mail server is not responding) rather than assuming the issue is with my phone and devise setup?

    As of sometime after September 10, 2012, at 4:40PM, I have not been receiving any mail.  Not on my iPhone, iPad, iMac, or MacBookPro.  The trouble shooting help on Apple's web site is designed to help ensure my devise settings are accurate.  However, I moved from .Mac to .me and now to .cloud and have operating with no issues for several months on the iCloud.
    How can I check to see if my mail problem is really Apple's fault rather than double checking all my devise settings ad nausiam?  I feel there is a server issue with Apple because none of my devises can receive mail, however, I do not know how to validate my theory with Apple.  I get an error message telling me:
    Cannot Get Mail
    The connection to the server failed.
    Apple says there is a mail server problem affecting 1% of users.  However, am I one of the 1%?  If I assume I am, wait for the problem to be fixed, and then learn I was not one of the 1% and continue to have mail issues, then I will be more frustrated.

    I have the same problem since yesterday morning. I checked the systems status and still the same. I guess we are the 1.1% who has problem with their email.

  • Can I use LDAP server's authentication mechanism rather than comparing password ?

    Hi All,
    The weblogic security and adminguide says that the user authencation can be of
    the following 3 types:
    1. Bind specifies that the LDAP security realm
    retrieves user data, including the password for
    the LDAP server, and checks the password in
    WebLogic Server.
    2. External specifies that the LDAP security
    realm authenticates a User by attempting to
    bind to the LDAP server with the username
    and password supplied by theWebLogic
    Server client. If you choose the External
    setting, you must also use the SSL protocol.
    3. Local specifies that the LDAP security realm
    authenticates a User by looking up the
    UserPassword property in the LDAP directory
    and checking it against the passwords in
    WebLogic Server.
    But say I want that my users should be authenticated by the LDAP server rather
    than picking up the password from LDAP and comparing at weblogic end. Then what
    should I do ?
    Because no. 2 is applicable only for ssl certificates, no.1 and no.3 picks up
    password using the login dn and password provided at the time of configuration
    of realm and compare with password given by user.
    And once gain there some issues on having picking up password and comparing it:
    1. Netscape directory server can store the password in oneway hashed form(and
    that is preferred , too). So when userpassword attribute is read , it's in one
    way hashed form. So how the comparison will go on ?
    2. Creating a user who has the access to user data along with userpassword attribute
    itself is a security threat, as if someone can crack that user's dn and password
    then he/she can do anything as userdata can be read.
    Any suggestion is welcome.
    TIA,
    Sudarson

    Thanks a lot Jerry.
    I got these stuff from weblogic 6.1 docs sets security.pdf and adminguide.pdf.
    I have another question, if that is the case (in Case of BIND), then why do we
    a require a dn of user and password who has the access to read the entire directory
    And at the same time, u specified this for Bind, what are the cases for other
    two-local and external ? And then what is actually difference between Bind and
    Local ?
    Pls help me.
    Thanks,
    Sudarson
    Jerry <[email protected]> wrote:
    Hi Sudarson,
    Whatever doc you were reading is at least partially incorrect, unfortunately...
    I know for sure that when you specify BIND, weblogic sends the username/password
    to your
    LDAP server in an attempt to bind to it.
    If the bind is successful, WLS determines that the username/password
    pair were correct.
    If the bind was unsuccessful, WLS determines that the username/password
    pairing is not
    valid.
    At all times, WebLogic is letting the LDAP server do the actual compare
    of
    username/password. WLS does not, at any time, retrieve a password from
    the LDAP server.
    I hope this helps,
    Joe Jerry
    sudarson wrote:
    Hi All,
    The weblogic security and adminguide says that the user authencationcan be of
    the following 3 types:
    1. Bind specifies that the LDAP security realm
    retrieves user data, including the password for
    the LDAP server, and checks the password in
    WebLogic Server.
    2. External specifies that the LDAP security
    realm authenticates a User by attempting to
    bind to the LDAP server with the username
    and password supplied by theWebLogic
    Server client. If you choose the External
    setting, you must also use the SSL protocol.
    3. Local specifies that the LDAP security realm
    authenticates a User by looking up the
    UserPassword property in the LDAP directory
    and checking it against the passwords in
    WebLogic Server.
    But say I want that my users should be authenticated by the LDAP serverrather
    than picking up the password from LDAP and comparing at weblogic end.Then what
    should I do ?
    Because no. 2 is applicable only for ssl certificates, no.1 and no.3picks up
    password using the login dn and password provided at the time of configuration
    of realm and compare with password given by user.
    And once gain there some issues on having picking up password and comparingit:
    1. Netscape directory server can store the password in oneway hashedform(and
    that is preferred , too). So when userpassword attribute is read ,it's in one
    way hashed form. So how the comparison will go on ?
    2. Creating a user who has the access to user data along with userpasswordattribute
    itself is a security threat, as if someone can crack that user's dnand password
    then he/she can do anything as userdata can be read.
    Any suggestion is welcome.
    TIA,
    Sudarson

  • I purchased an episode but it is only showing 30 seconds rather than the full 42 minutes. How do I get it to play the full episode as I can't seem to download it again?

    I downloaded a tv epsiode, but it doesn't show the entire 42 minutes. All I get is a clip of 30 seconds, rather than the entire 42 minute episode. I have tried to download the episode again, but it wont allow me to and I have also tried to download the series, but if I do that it wont deliver the epsiode that I already have suposedly downloaded. Anyone have any idea how to help?
    Thanks,

    Hi JAM147,
    Welcome to the Support Communities!
    The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    Judy

  • SPL block on address rather than name in some instances

    We run GTS 7.1, and we have the requirement where in some instances (but not all), we need GTS to place a SPL block on a business partner based on the partner's street address and city rather than their name.  This is a requirement because there are some "business partners" that we believe are performing inappropriate activities and are using the same address for their companies but are changing their company names often to try to avoid detection. Consequently, we want GTS to block documents when it sees a particular street address and city, no matter what the name of the business partner is. It appears that in GTS 7.1 name is a required field for a SPL record, so it does not allow us to enter a SPL record without a name.  We have entered SPL records with a name such as "No Name Listed" and the addresses that should be blocked, but we received inconsistent results (i.e., it blocks on some addresses, but not for others).  We also have attempted to adjust the configuration settings related to SPL screening service and modifying our SPL exclusion list, but we continue to get inconsistent results.  Can anyone help me solve this issue?
    Thanks,
    Nate

    Hi Nate -
    Never had the type of requirement you have posted, but intrigued.  Can't validate this in a system, but may be of some help.
    Possibility 1:
    Assumption:
    business specific list type for screening is created.
    solution:
    use your minimal index threshold to your advantage in the name field...enter the minimum number of characters to prevent the system from storing a search term/index for name when defining the specific SPL entity for your requirement....as well as any other components from your control procedure that you don't want the system to evaluate.
    ================================================
    Possibility 2
    (not as ellegant as 1 & likely a performance hit):
    Assumptions:
    you have a separate legal regulation set up for this specific type of check; as I'm not aware of a manner to assign multiple control procedures to achieve your additional requirement.
    Though I haven't implemented multiple SPL regs in a production environment, know it is possible; performance hit would need to be monitored.
    solution:
    Define Control Procedure for Address Comparison - set up a new one with only your screening criteria : CityAND, StreetAND ( wouldn't think you would want to match purely on City, so an OR statement would not be appropriate)
    Control Settings for "Sanctioned Party List Screening" Service - Assign the new control procedure to the new reg w/all the applicable settings for your requirements....& create business specific list type for screening.
    Would think that even though name is a required field in the manual Create SPL Entity, it should not actually get screened (use whatever you want); as it would not be included in the new control procedure.
    feel free to give the above a try if you haven't already done so.
    Regards,
    Jon
    Edited by: Jon Sledge on May 13, 2009 2:07 AM
    Edited by: Jon Sledge on May 13, 2009 2:56 AM provided second possibility

  • Background of imported .psd file showing grey green rather than black?

    Hi, the background of a .psd file imported into FCP is displaying a dull green background rather than black...do I need to coordinate the default FCP color profile with Photoshop or...?
    Thanks
    (Oh...and, just out of curiosity, what does a person gain by having earned points from answering questions?)

    (Oh...and, just out of curiosity, what does a person gain by having earned points from answering questions?)
    When you reach a million points Apple sends you an email that explains the meaning of life.
    Really...
    As you gain points by giving people good answers the number of coloured bars under your user name increases. In theory, this lets others know how much knowledge you have on the subject and therefore how much they can depend on your replies.
    rh
    Message was edited by: Randy Holder

  • When I double click on an event, shows large photo rather than All photos

    I don't know what I did to cause this, but somehow, when I double click on an event, it magnifies the particular photo my mouse is on, rather than opening up all of the photos in the event. How can I change this so when I click on an event, all the photos in the event appear?
    thanks very much.
    collintowne

    Quite iPhoto
    in the finder under your user account ==> library ==> preferences and delete com.apple.iphoto.plist
    launch iPhoto - your preferences will be reset to the iPhoto defaults
    LN

  • Smartform output showing another language rather than english

    Hi Experts,
    in my system if any of the smartform/script output want to see it showing another language.it's not showing in english language.same smartform in my friend's system it is showing english only.
    Please suggest me the solution.
    Thanks in advance,
    Venkat.

    Hi
    See the attached 2 OSS notes for your problem
    OSSNote:960341
    Symptom
    In some device types (e.g HPLJ4, HPLJ5) you experience non-uniform character spacing in the PDF document after the PDF conversion of SAPscript or Smart Forms documents, using HELVE or TIMES fonts. You want to know the reason.
    Other terms
    CONVERT_OTF, SAPscript, Smart Forms
    Reason and Prerequisites
    The problem is not due to an error in the PDF converter but due to the fact, that the printer font, underlying the device type (e.g. Univers or CG Times in PCL-5 device types), is not available for the PDF converter and is either not available in Adobe Reader. The PDF converter has to try to simulate the layout of the printer font by means of a font which is predefined in Adobe Reader. This is done by assigning the letter widths of the printer font to the font used in Adobe Reader.
    The PDF file contains a table with letter widths, used by Adobe Reader in the output of text, for each used printer font (except PostScript fonts).
    Example:
    %Charwidth values from HP4300 HELVE 060 normal
    /Widths
    [ 278 333 500 633 633 1000 758 333 333 333 633...
    Adobe reader converts this width table, by modifying the space between each character, so that the specified letter width (= space between the current and the next letter) is kept.
    This 'Simulation' of printer fonts results in the sometimes visible irregular spaces in PDF.
    The PDF converter always uses the Helvetica Adobe PostScript font for the display of HELVE and the Times Roman Adobe PostScript font for the display of TIMES. However, for these Adobe PostScript fonts, Adobe Reader often uses a Windows TrueType font, which differs slightly from the original PostScript font.
    Solution
    Workaround: Use the POST2 PostScript device type or the PDF1 PDF device type for the PDF conversion of documents in the Latin-1 character set. They both use the Adobe PostScript fonts Helvetica or Times Roman for the HELVE/TIMES printer fonts.
    Header Data
    Release Status: Released for Customer
    Released on: 30.06.2006 12:44:06
    Priority: Recommendations/additional info
    Category: Consulting
    Primary Component: BC-CCM-PRN Print and Output Management
    Secondary Components: BC-SRV-SCR SAPscript
    OSS Note: 776507
    Symptom
    Documents printed via SAPscript or SmartForms do not print with correct special characters, e.g. ### prints instead of Japanese or Russian characters. What to do?
    Other terms
    SAPscript, SmartForms, printing, device types, OTF
    Reason and Prerequisites
    Help required to choose proper fonts in a SAPscript or SmartForm
    Solution
    When using SAPscript or SmartForms to print (or email or fax) a form from a business application, many factors influence the outcome of the actual text within the form. All these factors must be checked in order to ensure a correct printout:
    1) The language version of the form used to produce the printout.
    Example: If you want to print a French invoice, you need to have a FR version of your SAPscript or SmartForms invoice form RVINVOICE01. And the application program must specify the corresponding language key (FR) when calling the SAPscript or SmartForms API.
    2) The font selections specified in the form (possibly also in a SAPscript style or SmartStyle used in a form).
    Example: In a SAPscript form or a SmartStyle you need to specify HELVE if you want to print German text in Helvetica (or similar) font. If you want to print Japanese text, HELVE is not a valid choice but you need to specify a Japanese font like JPMINCHO in your Japanese form.
    3) The output character set of the device type
    Every printer in transaction SPAD has a "device type" assigned. Device types used by the spooler for printing support only one single specific output character set. All text from the form has to be converted (using SAP's built-in character conversion mechanism) to this output character set.
    A character set can typically support either a single language (e.g. Shift-JIS which supports only Japanese) or a set of languages (e.g. ISO 8859-1, which supports Western-European languages). It is possible that a given language (such as German) can be supported by several output character sets, e.g. you may use either ISO 8895-1 (Latin-1) or ISO 8859-2 (Latin-2) to represent German text. This is so because both character sets contain the special characters used in German.
    Example: HPLJ4000 is a HP LaserJet device type supporting the ISO 8859-1 (Latin-1) character set. ISO 8859-1 can be used to represent e.g. Dutch, English, French, German, Spanish, Swedish but NOT Russian or Japanese.
    As a consequence, it is ok to use HPLJ4000 to print English, German French etc. but not for Japanese or Russian.
    4) The set of available printer fonts for a given device type
    When formatting a document, SAPscript and SmartForms perform an automatic mapping of the font definitions in the form (e.g. "HELVE 14 point bold") and the available printer fonts of the device type. A replacement printer font is chosen, should the specified font selection not be available in the device type. Now this replacement can be problematic if a language-specific font, such as Chinese CNSONG, is specified in a form and it gets replaced by a font which does not support this language, e.g. COURIER.
    To solve this problem, font families in SE73 have language attribute assigned, e.g. some fonts are characterized as being suitable only for certain languages. And when a replacement has to be chosen because the original font from the form is not available in the device type, a replacement font is chosen which has the same language attributes.
    If no fonts for the language in question exist in the device type, the resulting font will not be able to print the special characters and you will see "wrong" output characters in the printout.
    Note on SAPscript/SmartForms Print Preview:
    The OTF Print Preview available in Windows GUI (e.g. from transaction SP01) will sometimes not show the "wrong" characters which appear on the final printout. Here is the reason: since the Print Preview runs in Windows environment, it will use Windows fonts to represent the actual printer fonts. A Windows font typically has more available characters (i.e. covers more character sets) than are actually available in a printer's resident font.
    A typical example where the Print Preview will differ from the printout is here: if you have a Chinese PCL5 printer such as CNHPLJ4 and use the Western Latin font COURIER in your document, the print preview will show you Chinese characters if you (by accident) tried to format Chinese characters in COURIER font. This is because Windows will automatically choose a font that can output Chinese characters (which is actually not Courier). But when you print the job on an actual PCL5 printer with resident Western and Chinese fonts, the Courier font will not print any Chinese characters but Western special characters instead, because the printer's resident Courier font does not include Chinese characters.
    Rule of thumb: all Asian device types (e.g. CNHPLJ4, JPHPLJ4, JPPOST, KPHPLJ4) support not only Asian fonts but also COURIER, HELVE and TIMES fonts. But these Latin fonts can only be used to print English text, not Chinese/Japanese/Korean characters.
    Which fonts are suitable for a given language?
    Language(s): Font family to use in a form:
    Latin-1 (Western Europe/Americas) *******
    DE,EN,FR,ES,NL,SV COURIER, HELVE, TIMES
    (LETGOTH, LNPRINT)
    Latin-2 (Central Europe) ****************
    PL, CZ COURIER, HELVE, TIMES
    ISO 8859-4 (Baltic) *********************
    ET, LT, LV COURIER, HELVE, TIMES
    ISO 8859-5 (Cyrillic) *******************
    BG, RU, SR, UK COURCYR, HELVCYR, TIMECYR
    ISO 8859-7 (Greek) **********************
    EL COUR_I7, HELV_I7, TIME_I7
    ISO 8859-8 (Hebrew) *********************
    HE COURIER, HELVE, TIMES
    ISO 8859-9 (Turkish) ********************
    TR COURIER, HELVE, TIMES
    Simplified Chinese **********************
    ZH CNHEI, CNKAI, CNSONG
    Japanese ********************************
    JA JPMINCHO, DBMINCHO, DBGOTHIC
    Korean **********************************
    KP KPBATANG, KPDODUM, KPGULIM
    KPGUNGSE, KPSAMMUL
    Traditional Chinese *********************
    ZF TWDPHEI, TWMING, TWSONG
    Thai ************************************
    TH THANGSAN, THDRAFT, THVIJIT
    Arabic (Unicode systems only) ***********
    AR ANDALE_J
    Verify your output by examining the OTF data
    When analysing printing problems of this type, be sure to check the OTF data which gets produced by SAPscript or SmartForms. OTF or "Output Text Format" is the intermediate page-description format generated from SAPscript or SmartForms. OTF will contain the final printer font names and character set/language identifiers which help to solve the problem. OTF will even name the form and the language of the form used to create the output.
    The easiest way to do this is to create a spool request from your application, run transaction SP01, use menu
    Goto->Display Requests->Settings
    and choose
    Display Mode: Raw
    Now display your spool request. If this is a SAPscript or SmartForms spool request, you will see OTF data. Each line represents one OTF command, every command starts with a 2-character cmd identifier and possibly some cmd parameters follow.
    Here is an excerpt from a sample OTF file where we highlight the most interesting commands:
    //XHPLJ8000 0700 00000000001
    IN04EALEXTEST_ZEBRA
    IN05%PAGE1
    OPDINA4 P 144 240 1683811906000010000100001
    IN06%WINDOW2
    MT0024401289
    CP11000000E
    FCHELVE 120 00109XSF100SF101110000067E X
    UL +0000000000000
    SW00067
    CT00000000
    ST0453037Dieses SF hat Stil ALEXTEST_ZEBRA mit
    The 1st line with the // (Control) command reveals the device type usedto print: HPLJ8000
    //XHPLJ8000 0700 00000000001
    The 2nd line (IN = Info command) shows the name and (internal 1-char)language key of the form:
    IN04EALEXTEST_ZEBRA
    In this case it is the English (E = EN) SmartForm ALEXTEST_ZEBRA
    The OP-line (OP = Open Page) gives the page format used in the form, it is DINA4 Portrait orientation:
    OPDINA4 P 144 240 1683811906000010000100001
    The CP (CodePage) cmd shows the SAP system codepage used to code the text and the active language. In our case it is codepage 1100 and language E = EN = English.
    CP11000000E
    Finally, the FC-cmd (Font Call) lists a printer font selected within SmartForms. Please note that every SmartForm has a designated default SmartStyle under "Form Attributes->Output Options". In addition, every text node can have a SmartStyle attached (which will override the definitions from the default style for the text). In our case the resulting printer font that was selected is HELVE 12.0 pt bold-off, italic-off.
    FCHELVE 120 00109XSF100SF101110000067E X
    Header Data
    Release Status: Released for Customer
    Released on: 22.08.2005 09:57:20
    Priority: Recommendations/additional info
    Category: Customizing
    Primary Component: BC-CCM-PRN Print and Output Management
    Secondary Components: BC-SRV-SCR SAPscript
    BC-SRV-SSF Smart Forms
    <b>Reward points</b>
    Regards

  • SQL query to show "starts with" rather than "is like"

    Hi friends,
    I've written a query to show all BPs we have sold to in a particular Zip Code region. I have used WHERE T1.[ZipCode] like '%[%0]%'  but this brings up everyone where the zip code contains the phrase:
    I want to search for Zip Codes starting "BT" it will bring in post codes like MK41 9BT.
    How can I tell the report to bring in BPs where the Zip Code starts with "BT"
    Thank you

    Hi Tim,
    Try this option also ,
    WHERE left(T0.[e_mail],2)  like '[%0]%%'
    OR
    WHERE left(T0.[e_mail],2)  =  '[%0]'

  • Recently I reset my submenues to use the Show All option rather than displaying the entire contents of the menu. How do I get that setting back.

    Recently, I altered how my sub menes are displayed. I opted to have the sub menues display a "Show All" option to access the entire sub menu. This was a mistake and I can not determine how to return my sub menues to the complete list of available choices. How do I do this?

    Which sub menus do you mean?
    Are that sub menus from the Firefox menu bar or orange Firefox menu button or the context menu on a web page or otherwise?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for