Server0 stooped when I try to start the system...
Hi gurus,
I don´t know what´s happen when I try to start the system and the Java side don´t start, it stay in MMC console with yellow semaphore at disp+work.EXE and when I look inside of J2EE Process Table in the same console the server0 is stopped and it show the exit code -11113 !!
I checked two logfiles:
dev_server0 :
Sun Aug 23 21:42:48 2009
14.537: [GC 14.537: DefNew: 103014K->17353K(131328K), 0.0753503 secs 103014K->17353K(1004800K), 0.0754636 secs]
Sun Aug 23 21:42:50 2009
16.592: [GC 16.592: DefNew: 104905K->18569K(131328K), 0.0589135 secs 104905K->18569K(1004800K), 0.0590141 secs]
Sun Aug 23 21:42:53 2009
JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
19.422: [GC 19.423: DefNew: 106121K->25119K(131328K), 0.0994074 secs 106121K->25119K(1004800K), 0.0995054 secs]
JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
Sun Aug 23 21:42:54 2009
JLaunchIExitJava: exit hook is called (rc = -11113)
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
JLaunchCloseProgram: good bye (exitcode = -11113)
dev_disp:
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1)
***LOG Q0K=> DpMsAttach, mscon ( sapssm)
DpStartStopMsg: send start message (myname is >sapssm_SSM_00 <)
DpStartStopMsg: start msg sent
Sun Aug 23 21:40:24 2009
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Sun Aug 23 21:40:25 2009
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet
DpMsgAdmin: Set patchno for this platform to 201
Release check o.K.
Sun Aug 23 21:40:38 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Hi Arun Singh,
I´m not change any UME parameter. I checked that in fact J2EE_Guest was locked, I already unlocked this user! But I think that is not the problem, because I checked in other systems and in all of them this user is blocked, so don´t seem this is the problem!
The following are server VM settings:
-Djco.jarm=1
-XX:MaxPermSize=256M
-XX:PermSize=256M
-Xms1024M
-XX:NewSize=171M
-XX:MaxNewSize=171M
-XX:+DisableExplicitGC
-verbose:gc
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
-Djava.awt.headless=true
-Dsun.io.useCanonCaches=false
-XX:SoftRefLRUPolicyMSPerMB=1
-XX:SurvivorRatio=2
-XX:TargetSurvivorRatio=90
-Djava.security.policy=./java.policy
-Djava.security.egd=file:/dev/urandom
-Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
Answering to your second question in fact the system have the license out of date! But at two weeks ago the license was in the same state (out of date) and the java side on system was fine!!!...
Best regards,
João Dimas
Similar Messages
-
Error message when I try to start the SC SM Console
Hi,
i get the following error message when I try to start the SC SM Console in TN MSDN Virtual Lab
Message: Failed to connect to server 'SCSM01.contoso.com'
Microsoft.EnterpriseManagement.Common.UnknownServiceException:
The
service threw an unknown exception. See inner exception for details.
---> System.ServiceModel.FaultException`1[System.UnauthorizedAccessException]:
The creator of this fault did not specify a Reason. (Fault Detail is
equal to System.UnauthorizedAccessException:
You have exceeded the
evaluation period of this product. For information on purchasing the
retail version of this product, go to
http://go.microsoft.com/fwlink/?LinkID=151842.
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.CheckLicence()
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.Connect(SdkClientConnectionOptions
options)
at Microsoft.EnterpriseManagement.ServiceDataLayer.BasicDispatcherService.Connect(SdkClientConnectionOptions
connectionOptions)).
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception
ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings
connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings
connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings
connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings
connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ServiceManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings
connectionSettings, EnterpriseManagementGroupInternal
internals)
at Microsoft.EnterpriseManagement.ServiceManagementGroup..ctor(ServiceManagementConnectionSettings
connectionSettings)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupSessionManager.Connect(String
server)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Console.Credentials.ManagementGroupConnection.TryConnectToManagementGroupJob(Object
sender, ConsoleJobEventArgs args)
System.ServiceModel.FaultException`1[System.UnauthorizedAccessException]:
The creator of this fault did not specify a Reason. (Fault Detail is
equal to System.UnauthorizedAccessException:
You have exceeded the
evaluation period of this product. For information on purchasing the
retail version of this product, go to
http://go.microsoft.com/fwlink/?LinkID=151842.
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.CheckLicence()
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.Connect(SdkClientConnectionOptions
options)
at Microsoft.EnterpriseManagement.ServiceDataLayer.BasicDispatcherService.Connect(SdkClientConnectionOptions
connectionOptions)).System.UnauthorizedAccessException: You have exceeded the evaluation period of this product
If this is an evaluation lab, then it's time to rebuild it.
If this is a production system, then you'll need to contact product support, show proof of ownership, and get their tool that will convert the management group to a licensed version.
Generally, when building a system for production, you should do it with a full product key. there is no supported method to add the license key later except through product support's special tools. -
i have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??
Hi
Did You ever use - iPhoto ?
Did You may be direct iPhoto to a different Photo Library
As iMovie tries to find the appropriate photo library - it can get lost if iPhoto direct it into a Library on a not connected external hard disk or to a strange location - And iMovie HANGS.
Do - When no other program is running that might interfere
• Start iPhoto - BUT NOW KEEP alt-key (option key) DOWN during the full Start-Up process
• Now iPhoto let's You select Photo Library
• Select the one in Your Account / Home folder / Pictures ! !
• Then iPhoto should start up OK
• Now Quit iPhoto
• START iMovie
Does it still hangs - then I would suspect - iMovie Pref. file
If it Run's OK - Then HURRAY !
Yours Bengt W -
when i try to start the computer, it cycles on and off. Need disk.
Hi:
You can try to call HP at this number 1-800-334-5144, to see if they have any recovery disks left for that model.
If not, you can order a set from this other vendor for $27 + shipping.
http://www.computersurgeons.com/productdetails.aspx?ID=15126
Paul -
I have iPhone 4 and I update it to iOS 7 and when I try to start the personal hotspot it crashed and for sometime my cellular data was also not working then allot a sudden the personal hotspot icon disappeared from my settings.
Has anyone faced a problem like this!!!No. If you go Settings App > General > Reset > "Erase All Content and Settings", you will have the same iOS that was on the iPhone when you tapped the Erase button. If you believe your iPhone is Jailbroken, then this will not work. If you use iTunes on computer, this will put iPhone to current iOS which is iOS 7.0.2
-
Angry birds rio quit working when I installed the latest app. I even uninstalled it and started over. When I try to start the game, it goes back to the main menu. I need help badly but in simplest of terms so I'll be able to follow.
Have you tried closing the app completely ? From the home screen (i.e. not with Angry Birds 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Angry Birds app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Just got a new iPod Nano 7gen. Have downloaded and installed iTunes 10.7 and installed succesfully. But iTunes fails when I try to start the program. Have OS X 10.8.2. Moutain Lion. Please help - thanks.
SvenProblem solved. Copied latest file of iTunes Library.itl from Previous iTunes Libraries and replaced it with the original in Music - iTunes-folder.
-
Why does my cellphone keep saying that "estimating time remaining" when I try to upgrade the system?
Is there anyway to fix this situation?Hi Eric_Sun,
Thanks for visiting Apple Support Communities.
You may want to update your iPhone using iTunes on a computer if your device only shows "estimating time remaining" when you try to update wirelessly:
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you see an error message while updating your device, you can learn how to resolve iOS update errors in iTunes.
You can find these steps here:
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
If you are still not able to update, I recommend the steps in this article next:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Best Regards,
Jeremy -
I just recently purchased this macbook. The optical drive was faulty, i opened it up and rubbed alcohol on the lens and that didnt work. I connected an old ide dvd rw drive in a 3.5 enclosure and it seems to work like a charm. I installed snow leopard with it so i know that it is in complete working order. I also upgraded the ram so that should not be an issue either. This is a first generation macbook 1.1 with the core duo processor. I just want to install my xp professional operating system onto this unit. I have the original xp professional disk with service pack 2, not a burned iso. When i try to launch the windows installer the dvd drive fires up and it seems like its attempting to launch windows then the screen goes from bright white to a folder with a question mark on it. From there nothing happens. Is there something i can do or that i am missing here?
Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous. -
Just installed the trial version of InDesign but once it is all loaded it does nothing when I try to run it. What can I do?
Also you can try to enable new local admin account.
Log in using built in-administrator | Create local administrator account | Windows 7, 8, Vista
Try to launch the application and check on new user. -
bash-2.03# ./start-admin
AdmInit: Failed to perform security initialization for communicate with LDAP in SSL mode (error code = -1) Exit
so i can not login to console (./startconsole) because the "admin-serv" is not up: "Can not connect to the Admin Server "http://myserver.com:myportnumber/" The URL is not correct or the server is not running." any ideas..."
---------------------Seumas Froemke on 1/15/2002 said: ----------------
"I'm not familiar with the error, but I'll throw in my two cents and hope it leads you somewhere.
First, be sure you start things in the correct order. LDAP->Admin->Console.
Be sure you've set nsadminservaccessaddresses and nsadminaccesshosts.
Do you have problems starting everything up when you aren't using SSL mode?
You can put startconsole into debug mode with startconsole -D 9 but I don't think there is a start-admin debug mode. You'd have to settle for a truss.
All in all, you should ask this in the LDAP (User Management & Policy) forum."
--------------------and i wrote: -------------------------------------
Homero Borgo Valdez on 1/18/2002 said:
"I start things in the correct order.
how can i check the nsadminservaccessaddresses and nsadminaccesshosts settings (i'm new on this suite as you can see).
if i moved some checkbox when the console was ok how can i view that settings in text mode?
by the way i have another server that can sun console well (port 2125) so what file can i compare to change some wrong settings?
thanks anyway, another idea?"
--------------------so following the commnets i put this history here ----
help please!!jvm file is in your system file folder.so you can delete that jvm file and to run as it is.
-
Fault Module Name:
QuickTime.qts
Fault Module Version:
7.72.80.56
Fault Module Timestamp:
4f8f8aa7Is that crash also happening with other video content you try to play?
If so, and you're running iTunes 10.7.0.21, perhaps try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
I installed the CS6 on a PC with Windows 7. Once it installed, every time I try to run it gives me Error: 213.10. I tries the LicFix_21319 that the site recommended and it did not help. Any Ideas of why I am getting this and how to fix it.
We can't know. You have not provided any system information or the exact error. Most commonly this happens when a security tool is blocking the installers or you run with insufficient user privileges, but that's all we can kinda guess here.
Mylenium -
i've restarted everytihng SO many times, have taken out all other usb connections, apart from the ipad. my itunes on the mac pro is 10.6.3 and there are no latest updates for my mac pro. Got so close with upgrading the ipad software but then got a message saying "couldn't locate the device" so tried the recommended routes but cant even get the update to start now. many thanks, k x
Jailbroke?
-
I rent a movie on iTunes stores, downloading it to my iPad2, but during the movie, the reading stop from capter 10 to End. I try to restart it, but an alert message inform me that i cannot read the movie. What is the issue for solve this problem? The movie is still located on apps movie, but i cannot read it. Please help.
Having the same problem. Watched 25 minutes of a rental and it stopped with the message"unable to load video"
Using current version IPad mini.
Ios7 is HUGH PIECE OF CRAP!!!!
Maybe you are looking for
-
"iTunes has encountered a problem and must close" message opening iTunes?
Every time I try to open iTunes or Quicktime from my desktop or anywhere else, this message comes up: "iTunes has encountered a problem and must close. Sorry for the inconvenience. Please click here to send an error report." Because of another proble
-
Hello, I'm running FrameMaker 12 on Windows 7. When I startup the program, I must select one of the follow three.(in 'Choose Interface' window.) - FrameMaker - Structured FrameMaker - FrameMaker XML Author Unfortunately, after clicking 'Structured Fr
-
Can't open Premiere Pro after installing from CC
Says there is an error and the program has stopped working... even before it starts working. Uninstalled and reinstalled, same problem. Restarted computer after install, same problem. Any ideas?
-
Has anyone had/fixed a problem with slow printing from IP based printers? When we installed the printers (various printer makes and models too, it's not just related to one brand) they all worked just fine and responded normally. It seems that over t
-
My rescue email address no longer exists and I can't remember my security questions. HELP