SERVERS ON DMZ
Hello all,
I have a cisco asa 5545 on which the DMZ port is connected to the 2960 switch.Also i have two servers connected to the L2 switch which needs to be routed to Internet.
My question is can I make these two servers access the internet through the single dmz port? Also these servers are connected to the switch on the ame vlan and the switch in turn to the dmz port of the firewall.
Thanks
Yes, just give them an IP from the subnet used for that vlan and use the dmz interface on the ASA as their default gateway.
Then depending on the access you need setup the NAT statements and the acl rules.
If you want external access you will need static NAT entries and allow that the traffic in an acl applied inbound to your outside interface.
If you just want the servers to be able to go out to the internet then you need a dynamic NAT statement and no need for an acl.
Jon
Similar Messages
-
is it's right practice whether all exchange 2010 role servers in Dmz zone??
or need to place only cas server in DMZ ZOne??Hello,
It is required to place at least one writable Domain Controller with Global Catalog in every Ad site where Exchange servers are going to be deployed.
Hope it helps,
Adam
www.codetwo.com
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
find the answer faster. -
How to manage VM servers in DMZ through NAT proxy?
Dear all,
We need to build some VM servers in DMZ network. And the OVM Manager is located in trust zone (behind DMZ). OVM manager can connect to the DMZ vm servers through NAT proxy. But, there are some errors after I have added the servers.
In fact, there is no management network for OVM manager. So, I seem no workaround.
Have you any idea about this deployment?
Mikemtktang wrote:
We need to build some VM servers in DMZ network. And the OVM Manager is located in trust zone (behind DMZ). OVM manager can connect to the DMZ vm servers through NAT proxy. But, there are some errors after I have added the servers. We do not support Oracle VM Server via NAT, because the Servers get the IP address of the Manager to connect to (and not the NAT'd address). So the API python binding download and notifications will fail. It is very unlikely that this would work. -
Manage servers in DMZ and IBCM with the same MP/SUP/DP in DMZ
Hi all,
I already asked a similar question on this forum about a month ago. I got some amswers but couldn't make it work and I still need some extra help.
I use SCCM 2012 R2 with CU3, I only have one Primary site installed in my internal domain and a management point in my DMZ domain (different forests, no trust) that serves internet clients.
I also want this DMZ MP to manage the intranet clients in DMZ (Web servers...) and I can't make it work.
I thought I could take advantage of the registry AllowedMPs offered by the CU3 because my DMZ clients are not allowed to communicate with the internal primary site on 80/443.
I would like to avoid using the CCMALWAYSINF switch during the SCCM Client installation and to not treat my servers as internet clients. It works but I don't want the DMZ clients to use windows update to download the updates.
Thanks again for your help.Hello,
Peter, thanks for your quick answer.
1. I have a client certificate and it works because i was able to connect my DMZ server to the MP as an Internet client.
2. I created the certificated with both names (Internet and Intranet), I used the alernative names filed.
3. The MP and DP allow Intranet and Internet connnection.
Here is the other thread I created a while ago, so you can have all the information
https://social.technet.microsoft.com/Forums/en-US/ce18386b-8306-48d3-a27f-59fa2ee3a4fa/wrong-mp-assignement-for-clients-in-dmz?forum=configmanagergeneral#09a5ca7d-e626-4cbf-9f00-e8ef2ab745c9 -
ACE: load balancing servers using DMZ ports on FWSM
devices; (2 core with the ff config)
6500
fwsm
idsm
msfc
SETUP;
Servers are connected to the dmzs on the core
REQUIREMENT;
to load balance the servers
QUESTION;
Using the ACE module, is it possibe to load balance the servers which are connected to the port which is configured as DMZ?
Thanksdoes not matter where the servers are connected.
However, be aware that the flows from client to server needs to go through the loadbalancer BUT also the flows server to client.
So, you should be careful where you attach the ACE module.
The easier would be to attach to the DMZ as well between the FW and the servers.
Gilles. -
Why servers in DMZ have 2 different IP addresses?
I notice that all of my company's unix servers in the DMZ have 2 IP addresses.
Could you expalin why?
Thanks! Points will be given.Hi Laura,
DMZ is used as Security factor!
In this you use the NAT protocol, which has an external IP adress and a internal IP address.
The external IP address is available for pulbic and the internal for the System to work with but not known to pulbic for security reasons!
For details on that :
http://documents.made-it.com/sap-int.html
SAP Web Dispatcher Pre-Authentication
http://compnetworking.about.com/cs/networksecurity/g/bldef_dmz.htm
Regards,
Prem
http://compnetworking.about.com/cs/networksecurity/g/bldef_dmz.htm -
Hello,
I am new to Cisco firewalls and am attempting to setup a DMZ on the firewall.
I have managed to create the interface and vlan and ip address settings etc. But im a bit lost with the NAT settings and rules i need to create for it.
I need to be able to do the following:
- RDP access from inside network to the DMZ servers
- Internet access for the DMZ
I am also setting up Active Directory Federation and requirre HTTPS traffic from the following:
- DMZ HTTPS to outside (Office 365 Services)
- Outside HTTPS to DMZ (ADFS Servers on DMZ only)
- DMZ HTTPS to inside (ADFS Servers Only)
- Inside HTTPS to DMZ (ADFS Servers Only)
Running Config:
interface Vlan1
nameif inside
security-level 100
ip address ccl-sua-asa 255.255.255.0
ospf cost 10
interface Vlan3
no forward interface Vlan1
nameif dmz
security-level 50
ip address 172.16.0.1 255.255.255.0
interface Vlan100
nameif outside
security-level 0
ip address 77.107.90.202 255.255.255.248
ospf cost 10
interface Ethernet0/0
switchport access vlan 100
speed 100
duplex full
interface Ethernet0/1
description Connected to CCL-SUA-SW1 port 16
interface Ethernet0/2
switchport access vlan 3
access-list inbound extended permit icmp any any
access-list inbound extended permit tcp host 87.86.204.100 host 77.107.90.203 eq smtp
access-list inbound remark Inbound ACT for Ruth Edmonds Only
access-list inbound extended permit tcp any interface outside eq www
access-list inbound extended permit tcp any interface outside eq 5022 inactive
access-list inbound remark Inbound rules for OWA 30/06/09 MD
access-list inbound extended permit tcp any host 77.107.90.203 eq https log
access-list inbound remark Inbound access for LDAP and SMTP from mimecast 02/07/09 MD
access-list inbound extended permit tcp object-group mimecast interface outside eq ldap
access-list inbound extended permit tcp object-group mimecast host 77.107.90.203 eq smtp
access-list inbound remark change request MET 56030 inbound POP3 for mimecast
access-list inbound extended permit tcp object-group mimecast host 77.107.90.203 eq pop3
access-list inbound remark Inbound rule for helpdesk 10/07/2012 ML
access-list inbound extended permit tcp any host 77.107.90.205 eq https
access-list inbound remark Inbound rule for survey 011012 ML
access-list inbound extended permit tcp any host 77.107.90.205 eq www
access-list inbound extended deny ip any any
access-list nonat extended permit ip 192.168.40.0 255.255.255.0 192.168.245.0 255.255.255.0
access-list nonat extended permit ip 192.168.40.0 255.255.255.0 192.168.252.0 255.255.252.0
access-list vpn-met-bir extended permit ip 192.168.40.0 255.255.255.0 192.168.252.0 255.255.252.0
access-list outbound extended permit ip object-group servers 192.168.255.0 255.255.255.0
access-list outbound extended deny ip any 192.168.255.0 255.255.255.0
access-list outbound extended permit ip 192.168.40.0 255.255.255.0 192.168.254.0 255.255.255.0
access-list outbound extended deny udp any 192.168.255.0 255.255.255.0
access-list outbound extended deny ip any 10.0.0.0 255.0.0.0
access-list outbound extended deny ip any 192.168.0.0 255.255.0.0
access-list outbound extended permit ip any any
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 192.168.40.0 255.255.255.0
nat (inside) 1 192.168.41.0 255.255.255.0
nat (dmz) 1 172.16.0.0 255.255.255.0
static (inside,outside) tcp interface 5022 192.168.41.1 ssh netmask 255.255.255.255
static (outside,outside) tcp interface ssh 192.168.41.1 ssh netmask 255.255.255.255
static (inside,outside) tcp interface www WEB www netmask 255.255.255.255
static (inside,outside) tcp interface ldap FILESERVER ldap netmask 255.255.255.255
static (inside,outside) 77.107.90.203 MAILSERVER netmask 255.255.255.255
static (inside,outside) 77.107.90.205 helpdesk netmask 255.255.255.255
static (dmz,outside) 77.107.90.206 172.16.0.7 netmask 255.255.255.255
access-group outbound in interface inside
access-group inbound in interface outside
route outside 0.0.0.0 0.0.0.0 77.107.90.201 1
route inside 192.168.41.0 255.255.255.0 ccl-sua-sw1 1
Like i mentioned I have already setup the DMZ itself but its just the NAT and rules im struggling to get working
Many Thanks
JamesHi,
If you have only a ASA5505 Base License then you can initiate/open connections from the DMZ to INSIDE
You can confirm the License level with "show version" command. It should read at the end of the output.
In the Base License you only have a restricted DMZ/3rd interface on the ASA. You can connect to it from anywhere BUT you have to limit it from connecting towards one of the other 2 intefaces. You have already done this with the command
no forward interface Vlan1
Which to my understanding is required to get the 3rd interface active when you only have Base License on ASA5505.
OUTSIDE -> DMZ
INSIDE -> DMZ
Connection initiating should be possible.
So it seems to me that you already have one problem that will limit connectivity and not just the NAT.
You already seem to have the Default PAT configuration for DMZ Internet traffic.
You dont have the NAT for DMZ <-> INSIDE traffic but as mentioned above it might already be limited by something else even though your configurations were fine.
The corrent NAT configuration to enable that traffic would be to use
static (inside,dmz) netmask
Repeat for all
EDIT: Naturally you would also need an ACL on the DMZ interface for DMZ -> INSIDE traffic since the INSIDE is of higher "security-level". But as soon as you add the ACL to the DMZ interface you would also have to use it to allow Internet bound traffic since the "security-level" looses its meaning after an ACL is attached to the interface.
- Jouni -
How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.
How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
JorgeHi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni -
ZBFW - dmz-zone to in-zone access
Hi IOSers,
I have a Cisco 2901 which terminates a Class C address pool.
I have split the Class C address pool into 3 sub-nets and 2 zones and created a non-addressable pool (private pool):
dmz-zone : x.x.x.0 TO x.x.x.127 (x.x.x.0/25)
in-zone: x.x.x.128 TO x.x.x.159 (x.x.x.128/27) & x.x.x.160 TO x.x.x.191 (x.x.x.160/27)
private-zone: 192.168.x.0 TO 192.168.x.255 (192.168.x.0/24)
I have configured private-zone NAT to use address pool x.x.x.161 TO x.x.x.189 within the in-zone.
Within the:
dmz-zone - are servers for : DNS, Syslog, SIP & HTTP/HTTPS
in-zone - is a SMTP mail server which is behind VPN Gateway/NAT, TomCat (Application Server) and PostgreSQL Server
private-zone - is where all standard users are operating from and they can access the SIP & HTTP/HTTPS servers within dmz-zone
My problem is that I cannot seem to configure the ZBFW to allow the dmz-zone HTTP/HTTP server to redirect to in-zone TomCat server.
I do not want to make the TomCat server generally visible and am instead using the Apache proxy/ajp13 to connect from dmz-zone server to in-zone server.
However I cannot seem to get anything (including icmp) to work from dmz-zone to in-zone.
I have Policy:
POLICY-DMZ-IN (dmz-zone to in-zone) which has:
any any udp/tcp inspect
any any icmp inspect
unmatched traffic DROP/LOG
But I still cannot get anything from dmz-zone to in-zone...
Can anyone please advise...
Could the POLICY-DMZ-IN be being overridden by other dmz-zone to out-zone policies?
I think I am making a basically incorrect assumption somewhere ...
NOTE: I have routing rules for each of various sub-nets and all out-zone to dmz-zone, out-zone to in-zone and private-zone to out-zone, in-zone and dmz-zone routing works ok, so it appears problem is with ZBFW not routing table.
Thank for any expertise you can bring to help resolve this.
Regards,
Zebity.Hi Karthikeyan,
thank you for offering to look at this, I do all my configuration using CCP, which is a lot easier than pawing over IOS commands.
I have dumped out the config, but as it is hard to pull out the partiular part of the config, so find following screen snap & config:
The areas where I think there are problems are with "self" zone items (can I get rid of self zone case completely, with exception of blocking any external (DSL) access to self?)
and the dmz-zone to in-zone and in-zone to dmz-zone configs.
Building configuration...
Current configuration : 32292 bytes
! Last configuration change at 00:16:54 UTC Mon Jun 11 2012 by admin
! NVRAM config last updated at 07:37:35 UTC Sun Jun 10 2012 by admin
version 15.1
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname big
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200 informational
enable secret 5 XXXXXXXXXXXXXXXXXXXXXXXXXXX
no aaa new-model
no ipv6 cef
no ip source-route
ip cef
ip dhcp excluded-address 168.192.200.1 168.192.200.99
ip dhcp excluded-address 168.192.200.126 168.192.200.254
ip dhcp excluded-address 200.200.200.1 200.200.200.79
ip dhcp excluded-address 200.200.200.91 200.200.200.126
ip dhcp pool PRIVATE-POOL-1
import all
network 168.192.200.0 255.255.255.0
domain-name in.froghop.com
dns-server 200.200.200.20 200.200.200.4
default-router 168.192.200.1
ip dhcp pool FROGHOP-POOL-2
import all
network 200.200.200.0 255.255.255.128
domain-name froghop.com
dns-server 200.200.200.20 200.200.200.4
default-router 200.200.200.1
no ip bootp server
ip domain name froghop.com
ip name-server 200.200.200.4
ip name-server 200.200.200.20
ip inspect log drop-pkt
ip inspect audit-trail
ip inspect name CCP_MEDIUM appfw CCP_MEDIUM
ip inspect name CCP_MEDIUM dns
ip inspect name CCP_MEDIUM ftp
ip inspect name CCP_MEDIUM h323
ip inspect name CCP_MEDIUM sip
ip inspect name CCP_MEDIUM https
ip inspect name CCP_MEDIUM icmp
ip inspect name CCP_MEDIUM imap reset
ip inspect name CCP_MEDIUM pop3 reset
ip inspect name CCP_MEDIUM netshow
ip inspect name CCP_MEDIUM rcmd
ip inspect name CCP_MEDIUM realaudio
ip inspect name CCP_MEDIUM rtsp
ip inspect name CCP_MEDIUM esmtp
ip inspect name CCP_MEDIUM sqlnet
ip inspect name CCP_MEDIUM streamworks
ip inspect name CCP_MEDIUM tftp
ip inspect name CCP_MEDIUM tcp
ip inspect name CCP_MEDIUM udp
ip inspect name CCP_MEDIUM vdolive
ip inspect name dmzinspect tcp
ip inspect name dmzinspect udp
appfw policy-name CCP_MEDIUM
application im aol
service default action allow alarm
service text-chat action allow alarm
server permit name login.oscar.aol.com
server permit name toc.oscar.aol.com
server permit name oam-d09a.blue.aol.com
audit-trail on
application im msn
service default action allow alarm
service text-chat action allow alarm
server permit name messenger.hotmail.com
server permit name gateway.messenger.hotmail.com
server permit name webmessenger.msn.com
audit-trail on
application http
strict-http action allow alarm
port-misuse im action reset alarm
port-misuse p2p action reset alarm
port-misuse tunneling action allow alarm
application im yahoo
service default action allow alarm
service text-chat action allow alarm
server permit name scs.msg.yahoo.com
server permit name scsa.msg.yahoo.com
server permit name scsb.msg.yahoo.com
server permit name scsc.msg.yahoo.com
server permit name scsd.msg.yahoo.com
server permit name cs16.msg.dcn.yahoo.com
server permit name cs19.msg.dcn.yahoo.com
server permit name cs42.msg.dcn.yahoo.com
server permit name cs53.msg.dcn.yahoo.com
server permit name cs54.msg.dcn.yahoo.com
server permit name ads1.vip.scd.yahoo.com
server permit name radio1.launch.vip.dal.yahoo.com
server permit name in1.msg.vip.re2.yahoo.com
server permit name data1.my.vip.sc5.yahoo.com
server permit name address1.pim.vip.mud.yahoo.com
server permit name edit.messenger.yahoo.com
server permit name messenger.yahoo.com
server permit name http.pager.yahoo.com
server permit name privacy.yahoo.com
server permit name csa.yahoo.com
server permit name csb.yahoo.com
server permit name csc.yahoo.com
audit-trail on
multilink bundle-name authenticated
parameter-map type inspect global
log dropped-packets enable
parameter-map type protocol-info yahoo-servers
server name scs.msg.yahoo.com
server name scsa.msg.yahoo.com
server name scsb.msg.yahoo.com
server name scsc.msg.yahoo.com
server name scsd.msg.yahoo.com
server name cs16.msg.dcn.yahoo.com
server name cs19.msg.dcn.yahoo.com
server name cs42.msg.dcn.yahoo.com
server name cs53.msg.dcn.yahoo.com
server name cs54.msg.dcn.yahoo.com
server name ads1.vip.scd.yahoo.com
server name radio1.launch.vip.dal.yahoo.com
server name in1.msg.vip.re2.yahoo.com
server name data1.my.vip.sc5.yahoo.com
server name address1.pim.vip.mud.yahoo.com
server name edit.messenger.yahoo.com
server name messenger.yahoo.com
server name http.pager.yahoo.com
server name privacy.yahoo.com
server name csa.yahoo.com
server name csb.yahoo.com
server name csc.yahoo.com
parameter-map type protocol-info aol-servers
server name login.oscar.aol.com
server name toc.oscar.aol.com
server name oam-d09a.blue.aol.com
parameter-map type protocol-info msn-servers
server name messenger.hotmail.com
server name gateway.messenger.hotmail.com
server name webmessenger.msn.com
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-2085601892
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2085601892
revocation-check none
crypto pki certificate chain TP-self-signed-2085601892
certificate self-signed 01
XXXXXXXX 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
4A6B4C93 CEE0C972 CEA5A38E 3C041EAD 803F43B2 DD121173 4302DC1E XXXXXXXX
4F5E79FE 8C76B0EC BC5DD668 69BE1A
quit
license udi pid CISCO2901/K9 sn FTXXXXXXXXXX
hw-module pvdm 0/0
username admin privilege 15 secret 5 XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
redundancy
ip tcp synwait-time 10
no ip ftp passive
class-map type inspect match-any OPEN-TRAFFIC-OUT-190
match access-group name OPEN-TRAFFIC-OUT-190
class-map type inspect match-any SMTPS-TRAFFIC-IN
match access-group name SMTPS-IN
class-map type inspect match-all NAT-POOL-TCP-TRAFFIC-OUT
match access-group name NAT-POOL-TRAFFIC-OUT
match protocol tcp
class-map type inspect imap match-any ccp-app-imap
match invalid-command
class-map type inspect match-any ccp-cls-protocol-p2p
match protocol edonkey signature
match protocol gnutella signature
match protocol kazaa2 signature
match protocol fasttrack signature
match protocol bittorrent signature
class-map type inspect match-all NAT-POOL-UDP-TRAFFIC-OUT
match access-group name NAT-POOL-TRAFFIC-OUT
match protocol udp
class-map type inspect match-all SELF-DNS-OUT
match access-group name SELF-DNS-OUT
match protocol dns
class-map type inspect match-any SMTP-PROTOCOL
match protocol smtp
class-map type inspect match-all ccp-cls-POLICY-DMZ-OUT-1
match class-map SMTP-PROTOCOL
match access-group name DMZ-MAIL-OUT
class-map type inspect match-any ccp-skinny-inspect
match protocol skinny
class-map type inspect match-any SIP-PROTOCOLS
match protocol sip
match protocol sip-tls
class-map type inspect match-all ccp-cls-POLICY-DMZ-OUT-2
match class-map SIP-PROTOCOLS
match access-group name DMS-SIP-TRAFFIC
class-map type inspect match-any OPEN-TRAFFIC-OUT-140
match access-group name OPEN-TRAFFIC-OUT-140
class-map type inspect match-any ccp-cls-insp-traffic
match protocol pptp
match protocol dns
match protocol ftp
match protocol https
match protocol imap
match protocol pop3
match protocol netshow
match protocol shell
match protocol realmedia
match protocol rtsp
match protocol smtp
match protocol streamworks
match protocol tftp
match protocol vdolive
match protocol tcp
match protocol udp
class-map type inspect match-all ccp-insp-traffic
match class-map ccp-cls-insp-traffic
class-map type inspect gnutella match-any ccp-app-gnutella
match file-transfer
class-map type inspect match-any OPENDIR-PROTOCOLS
match protocol kerberos
match protocol ldap
match protocol ldaps
match protocol ldap-admin
class-map type inspect ymsgr match-any ccp-app-yahoo-otherservices
match service any
match service text-chat
class-map type inspect msnmsgr match-any ccp-app-msn-otherservices
match service any
class-map type inspect match-any SYSLOG-PROTOCOL
match protocol syslog
class-map type inspect match-any ICMP-PROTOCOLS
match protocol icmp
class-map type inspect match-all SELF-ICMP
match access-group name SELF-ICMP-TRAFFIC
match class-map ICMP-PROTOCOLS
class-map type inspect match-any DMZ-DNS
match protocol dns
class-map type inspect match-all OPENDIR-OUT
match class-map OPENDIR-PROTOCOLS
match access-group name OPENDIR-TRAFFIC
class-map type inspect match-all SMTPS-TRAFFIC
match class-map SMTPS-TRAFFIC-IN
match protocol tcp
class-map type inspect match-any TRUSTED-HOSTS
match access-group name TRUSTED-HOSTS
match protocol udp
match protocol tcp
match protocol icmp
class-map type inspect match-any TRANSPORT-PROTOCOLS
match protocol tcp
match protocol udp
class-map type inspect match-any ccp-h323nxg-inspect
match protocol h323-nxg
class-map type inspect match-any ccp-cls-icmp-access
match protocol icmp
match protocol tcp
match protocol udp
class-map type inspect match-any ccp-cls-protocol-im
match protocol ymsgr yahoo-servers
match protocol msnmsgr msn-servers
match protocol aol aol-servers
class-map type inspect aol match-any ccp-app-aol-otherservices
match service any
class-map match-any sdm_p2p_kazaa
match protocol fasttrack
match protocol kazaa2
class-map type inspect match-any WEB-PROTOCOLS
match protocol http
match protocol https
class-map type inspect match-all ccp-protocol-pop3
match protocol pop3
class-map type inspect match-any ccp-h225ras-inspect
match protocol h225ras
class-map match-any sdm_p2p_edonkey
match protocol edonkey
class-map type inspect match-any SELF-DNS-IN
match access-group name SELF-DNS-IN
match protocol dns
class-map match-any sdm_p2p_gnutella
match protocol gnutella
class-map type inspect match-any ccp-h323annexe-inspect
match protocol h323-annexe
class-map type inspect match-any OPEN-TRAFFIC-IN-140
match access-group name OPEN-TRAFFIC-IN-140
class-map type inspect match-all SYSLOG-IN-DMZ
match access-group name SYSLOG-TRAFFIC
match class-map SYSLOG-PROTOCOL
class-map type inspect pop3 match-any ccp-app-pop3
match invalid-command
class-map match-any sdm_p2p_bittorrent
match protocol bittorrent
class-map type inspect kazaa2 match-any ccp-app-kazaa2
match file-transfer
class-map type inspect match-all ccp-protocol-p2p
match class-map ccp-cls-protocol-p2p
class-map type inspect match-all SDM_GRE
match access-group name SDM_GRE
class-map type inspect match-any ccp-h323-inspect
match protocol h323
class-map type inspect msnmsgr match-any ccp-app-msn
match service text-chat
class-map type inspect ymsgr match-any ccp-app-yahoo
match service text-chat
match service any
class-map type inspect match-all ccp-cls-ccp-pol-outToIn-1
match class-map SMTP-PROTOCOL
match access-group name SMTP-TRAFFIC
class-map type inspect match-any DNS-PROTOCOL
match protocol dns
class-map type inspect match-all ccp-protocol-im
match class-map ccp-cls-protocol-im
class-map type inspect match-all ccp-cls-ccp-pol-outToIn-2
match class-map ICMP-PROTOCOLS
match access-group name IN-ZONE-ICMP
class-map type inspect match-all ccp-invalid-src
match access-group 100
class-map type inspect match-all ccp-icmp-access
match class-map ccp-cls-icmp-access
class-map type inspect match-any ACCESS-PROTOCOLS
match protocol icmp
match protocol tcp
match protocol udp
class-map type inspect match-all ccp-cls-ccp-pol-outToIn-3
match class-map ACCESS-PROTOCOLS
match access-group name DMZ-ZONE-TRAFFIC
class-map type inspect http match-any ccp-app-httpmethods
match request method bcopy
match request method bdelete
match request method bmove
match request method bpropfind
match request method bproppatch
match request method connect
match request method copy
match request method delete
match request method edit
match request method getattribute
match request method getattributenames
match request method getproperties
match request method index
match request method lock
match request method mkcol
match request method mkdir
match request method move
match request method notify
match request method options
match request method poll
match request method propfind
match request method proppatch
match request method put
match request method revadd
match request method revlabel
match request method revlog
match request method revnum
match request method save
match request method search
match request method setattribute
match request method startrev
match request method stoprev
match request method subscribe
match request method trace
match request method unedit
match request method unlock
match request method unsubscribe
class-map type inspect edonkey match-any ccp-app-edonkey
match file-transfer
match text-chat
match search-file-name
class-map type inspect match-any ccp-sip-inspect
match protocol sip
class-map type inspect match-all PUSH-NOTIFICATIONS
match access-group name PUSH-NOTIFICATIONS
match protocol tcp
class-map type inspect http match-any ccp-http-blockparam
match request port-misuse im
match request port-misuse p2p
match req-resp protocol-violation
class-map type inspect edonkey match-any ccp-app-edonkeydownload
match file-transfer
class-map type inspect match-all DEST-DNS
match access-group name DEST-DNS
match class-map DNS-PROTOCOL
class-map type inspect aol match-any ccp-app-aol
match service text-chat
class-map type inspect match-all ccp-protocol-imap
match protocol imap
class-map type inspect edonkey match-any ccp-app-edonkeychat
match search-file-name
match text-chat
class-map type inspect match-all ccp-cls-ccp-permit-dmzservice-1
match class-map SYSLOG-PROTOCOL
match access-group name DMZ-SYSLOG
class-map type inspect match-any FTP-PROTOCOL
match protocol ftp
class-map type inspect match-all ccp-cls-ccp-permit-dmzservice-2
match class-map ICMP-PROTOCOLS
match access-group name DMZ-ICMP
class-map type inspect match-all ccp-cls-ccp-permit-dmzservice-3
match class-map WEB-PROTOCOLS
match access-group name DMZ-WEB
class-map type inspect match-all ccp-cls-ccp-permit-dmzservice-4
match class-map SIP-PROTOCOLS
match access-group name DMZ-SIP
class-map type inspect match-any TIME-PROTOCOLS
match protocol ntp
class-map type inspect match-all ccp-cls-ccp-permit-dmzservice-5
match class-map DMZ-DNS
match access-group name DMZ-DNS-TRAFFIC
class-map type inspect http match-any ccp-http-allowparam
match request port-misuse tunneling
class-map type inspect fasttrack match-any ccp-app-fasttrack
match file-transfer
class-map type inspect match-all ccp-protocol-http
match protocol http
class-map type inspect match-all ccp-cls-ccp-permit-dmzservice-6
match class-map ACCESS-PROTOCOLS
match access-group name IN-ZONE-TRAFFIC
policy-map type inspect ccp-permit-icmpreply
class type inspect ccp-icmp-access
inspect
class class-default
pass
policy-map type inspect POLICY-PRIVATE-TRANSIT
class type inspect ACCESS-PROTOCOLS
pass log
class class-default
drop
policy-map type inspect p2p ccp-action-app-p2p
class type inspect edonkey ccp-app-edonkeychat
log
allow
class type inspect edonkey ccp-app-edonkeydownload
log
allow
class type inspect fasttrack ccp-app-fasttrack
log
allow
class type inspect gnutella ccp-app-gnutella
log
allow
class type inspect kazaa2 ccp-app-kazaa2
log
allow
policy-map type inspect POLICY-IN-SELF
class type inspect ICMP-PROTOCOLS
inspect
class class-default
drop log
policy-map type inspect POLICY-SELF-IN
class type inspect OPEN-TRAFFIC-OUT-190
pass
class type inspect ccp-icmp-access
inspect
class class-default
drop
policy-map type inspect POLICY-DMZ-OUT
class type inspect TIME-PROTOCOLS
inspect
class type inspect WEB-PROTOCOLS
inspect
class type inspect FTP-PROTOCOL
inspect
class type inspect ccp-cls-POLICY-DMZ-OUT-2
inspect
class type inspect ccp-cls-POLICY-DMZ-OUT-1
inspect
class type inspect PUSH-NOTIFICATIONS
inspect
class type inspect DEST-DNS
inspect
class class-default
drop log
policy-map type inspect im ccp-action-app-im
class type inspect aol ccp-app-aol
log
allow
class type inspect msnmsgr ccp-app-msn
log
allow
class type inspect ymsgr ccp-app-yahoo
log
allow
class type inspect aol ccp-app-aol-otherservices
log
reset
class type inspect msnmsgr ccp-app-msn-otherservices
log
reset
class type inspect ymsgr ccp-app-yahoo-otherservices
log
allow
policy-map type inspect http ccp-action-app-http
class type inspect http ccp-http-blockparam
log
allow
class type inspect http ccp-app-httpmethods
log
allow
class type inspect http ccp-http-allowparam
log
allow
policy-map type inspect imap ccp-action-imap
class type inspect imap ccp-app-imap
log
policy-map type inspect pop3 ccp-action-pop3
class type inspect pop3 ccp-app-pop3
log
policy-map type inspect ccp-inspect
class type inspect ccp-invalid-src
drop log
class type inspect ICMP-PROTOCOLS
inspect
class type inspect ccp-protocol-http
inspect
service-policy http ccp-action-app-http
class type inspect ccp-protocol-imap
inspect
service-policy imap ccp-action-imap
class type inspect ccp-protocol-pop3
inspect
service-policy pop3 ccp-action-pop3
class type inspect ccp-protocol-p2p
inspect
service-policy p2p ccp-action-app-p2p
class type inspect ccp-protocol-im
inspect
service-policy im ccp-action-app-im
class type inspect ccp-sip-inspect
inspect
class type inspect ccp-h323-inspect
inspect
class type inspect ccp-h323annexe-inspect
inspect
class type inspect ccp-h225ras-inspect
inspect
class type inspect ccp-h323nxg-inspect
inspect
class type inspect ccp-skinny-inspect
inspect
class type inspect ccp-insp-traffic
inspect
class class-default
drop log
policy-map type inspect POLICY-PRIVATE-IN-DMZ
class type inspect TRANSPORT-PROTOCOLS
inspect
class type inspect ICMP-PROTOCOLS
inspect
class class-default
drop log
policy-map type inspect POLICY-IN-OUT
class type inspect OPEN-TRAFFIC-OUT-140
pass log
class type inspect WEB-PROTOCOLS
inspect
class type inspect OPENDIR-OUT
inspect
class type inspect DEST-DNS
inspect
class type inspect PUSH-NOTIFICATIONS
inspect
class class-default
drop log
policy-map type inspect ccp-permit
class class-default
drop
policy-map type inspect POLICY-DMZ-SELF
class type inspect ICMP-PROTOCOLS
inspect
class type inspect TRANSPORT-PROTOCOLS
inspect
class class-default
drop log
policy-map type inspect POLICY-SELF-OUT
class type inspect SELF-DNS-OUT
pass
class type inspect TIME-PROTOCOLS
pass
class type inspect NAT-POOL-UDP-TRAFFIC-OUT
inspect
class type inspect NAT-POOL-TCP-TRAFFIC-OUT
inspect
class class-default
drop log
policy-map type inspect POLICY-OUT-SELF
class type inspect SELF-DNS-IN
pass
class type inspect TIME-PROTOCOLS
pass
class type inspect SELF-ICMP
inspect
class class-default
drop log
policy-map type inspect POLICY-IN-DMZ
class type inspect SYSLOG-IN-DMZ
pass
class type inspect ICMP-PROTOCOLS
inspect
class class-default
drop log
policy-map type inspect POLICY-DMZ-IN
class type inspect TRANSPORT-PROTOCOLS
inspect
class type inspect ICMP-PROTOCOLS
inspect
class class-default
drop log
policy-map type inspect ccp-permit-dmzservice
class type inspect ccp-cls-ccp-permit-dmzservice-4
inspect
class type inspect ccp-cls-ccp-permit-dmzservice-1
pass
class type inspect ccp-cls-ccp-permit-dmzservice-3
inspect
class type inspect ccp-cls-ccp-permit-dmzservice-5
inspect
class type inspect ccp-cls-ccp-permit-dmzservice-2
inspect
class class-default
drop log
policy-map type inspect ccp-pol-outToIn
class type inspect OPEN-TRAFFIC-IN-140
pass
class type inspect ccp-cls-ccp-pol-outToIn-1
inspect
class type inspect ccp-cls-ccp-pol-outToIn-2
inspect
class type inspect SMTPS-TRAFFIC
inspect
class type inspect SMTPS-TRAFFIC-IN
pass log
class class-default
drop log
policy-map sdmappfwp2p_CCP_MEDIUM
class sdm_p2p_edonkey
class sdm_p2p_gnutella
class sdm_p2p_kazaa
class sdm_p2p_bittorrent
zone security dmz-zone
zone security in-zone
zone security out-zone
zone security PRIVATE-ZONE
zone security PRIVATE-IN
zone-pair security ccp-zp-out-dmz source out-zone destination dmz-zone
service-policy type inspect ccp-permit-dmzservice
zone-pair security ccp-zp-in-out source in-zone destination out-zone
service-policy type inspect POLICY-IN-OUT
zone-pair security ccp-zp-out-zone-To-in-zone source out-zone destination in-zone
service-policy type inspect ccp-pol-outToIn
zone-pair security ZP-DMZ-IN source dmz-zone destination in-zone
service-policy type inspect POLICY-DMZ-IN
zone-pair security ZP-DMZ-OUT source dmz-zone destination out-zone
service-policy type inspect POLICY-DMZ-OUT
zone-pair security ZP-IN-DMZ source in-zone destination dmz-zone
service-policy type inspect POLICY-IN-DMZ
zone-pair security ZP-OUT-SELF source out-zone destination self
service-policy type inspect POLICY-OUT-SELF
zone-pair security ZP-SELF-OUT source self destination out-zone
service-policy type inspect POLICY-SELF-OUT
zone-pair security ZP-PRIVATE-OUT source PRIVATE-ZONE destination out-zone
service-policy type inspect ccp-inspect
zone-pair security ZP-PRIVATE-IN source PRIVATE-ZONE destination in-zone
service-policy type inspect POLICY-PRIVATE-IN-DMZ
zone-pair security ZP-PRIVATE-DMZ source PRIVATE-ZONE destination dmz-zone
service-policy type inspect POLICY-PRIVATE-IN-DMZ
zone-pair security ZP-IN-SELF source in-zone destination self
service-policy type inspect POLICY-IN-SELF
zone-pair security ZP-SELF-IN source self destination in-zone
service-policy type inspect POLICY-SELF-IN
zone-pair security ZP-DMZ-SELF source dmz-zone destination self
service-policy type inspect POLICY-DMZ-SELF
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
interface Loopback0
ip address 200.200.200.190 255.255.255.224
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
zone-member security in-zone
interface Null0
no ip unreachables
interface GigabitEthernet0/0
description $ETH-LAN$$FW_INSIDE$
ip address 200.200.200.130 255.255.255.224
no ip redirects
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip nat outside
ip virtual-reassembly in
zone-member security in-zone
duplex auto
speed auto
no mop enabled
interface GigabitEthernet0/1
description $ETH-LAN$$FW_INSIDE$
ip address 168.192.200.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
zone-member security PRIVATE-ZONE
duplex auto
speed auto
no mop enabled
interface FastEthernet0/2/0
description $ETH-LAN$$FW_INSIDE$
ip address 192.168.1.160 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
zone-member security PRIVATE-ZONE
duplex auto
speed auto
no mop enabled
interface FastEthernet0/2/1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
shutdown
duplex auto
speed auto
no mop enabled
interface ATM0/3/0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
no atm ilmi-keepalive
interface ATM0/3/0.1 point-to-point
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface GigabitEthernet0/0/0
interface GigabitEthernet0/0/1
interface GigabitEthernet0/0/2
interface GigabitEthernet0/0/3
interface Virtual-Template1 type serial
description $FW_INSIDE$
ip unnumbered Loopback0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip virtual-reassembly in
zone-member security in-zone
interface Vlan1
description $ETH-4ESG$$INTF-INFO-10/100/1000 Ethernet$$ETH-LAN$FW-DMZ$$FW_INSIDE$
ip address 200.200.200.1 255.255.255.128
no ip redirects
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip nat outside
ip virtual-reassembly in
zone-member security dmz-zone
interface Dialer0
description $FW_OUTSIDE$
ip address 210.210.210.154 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip flow egress
ip nat outside
ip virtual-reassembly in
zone-member security out-zone
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password 7 XXXXXXXXXXXXXXXX
ppp pap sent-username [email protected] password 7 XXXXXXXXXXXX
service-policy input sdmappfwp2p_CCP_MEDIUM
service-policy output sdmappfwp2p_CCP_MEDIUM
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip flow-top-talkers
top 200
sort-by bytes
cache-timeout 500
ip dns server
ip nat pool NAT-POOL1 200.200.200.161 200.200.200.189 netmask 255.255.255.224
ip nat inside source route-map SDM_RMAP_1 pool NAT-POOL1
ip route 0.0.0.0 0.0.0.0 210.210.210.1
ip route 10.210.210.0 255.255.255.0 192.168.1.1 permanent
ip route 192.168.1.0 255.255.255.0 FastEthernet0/2/0 permanent
ip route 168.192.200.0 255.255.255.0 GigabitEthernet0/1 permanent
ip route 200.200.200.0 255.255.255.128 Vlan1 permanent
ip route 200.200.200.128 255.255.255.224 GigabitEthernet0/0 permanent
ip route 200.200.200.160 255.255.255.224 Loopback0 permanent
ip access-list extended DEST-DNS
remark CCP_ACL Category=1
permit udp any any eq domain
ip access-list extended DMS-SIP-TRAFFIC
remark CCP_ACL Category=128
permit ip host 200.200.200.30 any
permit ip host 200.200.200.40 any
ip access-list extended DMZ-DNS-TRAFFIC
remark CCP_ACL Category=128
permit ip any host 200.200.200.20
ip access-list extended DMZ-ICMP
remark CCP_ACL Category=128
permit ip any any
ip access-list extended DMZ-MAIL-OUT
remark CCP_ACL Category=128
permit ip any host 230.211.70.60
permit ip any host 230.250.90.137
ip access-list extended DMZ-SIP
remark CCP_ACL Category=128
permit ip any host 200.200.200.40
permit ip any host 200.200.200.30
ip access-list extended DMZ-SYSLOG
remark CCP_ACL Category=128
permit ip 230.211.70.0 0.0.0.255 host 200.200.200.32
permit ip 200.200.200.128 0.0.0.127 host 200.200.200.32
ip access-list extended DMZ-WEB
remark CCP_ACL Category=128
permit ip any host 200.200.200.35
permit ip any host 200.200.200.20
ip access-list extended DMZ-ZONE-TRAFFIC
remark CCP_ACL Category=128
permit ip 200.200.200.0 0.0.0.128 any
ip access-list extended ESP-TRAFFIC
remark CCP_ACL Category=1
permit esp any any
ip access-list extended IN-ZONE-ICMP
remark CCP_ACL Category=128
permit ip any any
ip access-list extended IN-ZONE-TRAFFIC
remark CCP_ACL Category=128
permit ip host 200.200.200.140 any
ip access-list extended NAT-POOL-TRAFFIC-IN
remark CCP_ACL Category=128
permit ip any 0.0.0.0 255.255.255.224
ip access-list extended NAT-POOL-TRAFFIC-OUT
remark CCP_ACL Category=128
permit ip 0.0.0.30 255.255.255.224 any
ip access-list extended OPEN-TRAFFIC-IN-140
remark CCP_ACL Category=1
permit udp host 230.211.70.60 host 200.200.200.140 eq isakmp
permit esp host 230.211.70.60 host 200.200.200.140
permit ip host 230.211.70.10 host 200.200.200.140
permit tcp host 230.211.70.35 host 200.200.200.140
deny ip host 230.211.70.60 host 200.200.200.140
ip access-list extended OPEN-TRAFFIC-OUT-140
remark CCP_ACL Category=1
permit udp host 200.200.200.140 host 230.211.70.60 eq isakmp
permit esp host 200.200.200.140 host 230.211.70.60
permit ip host 200.200.200.140 host 230.211.70.10
permit tcp host 200.200.200.140 host 230.211.70.35
deny ip host 200.200.200.140 host 230.211.70.60
ip access-list extended OPENDIR-TRAFFIC
remark CCP_ACL Category=128
permit ip any host 230.211.70.10
ip access-list extended PUSH-NOTIFICATIONS
remark CCP_ACL Category=1
permit tcp any any eq 5223
ip access-list extended SDM_GRE
remark CCP_ACL Category=1
permit gre any any
ip access-list extended SELF-DNS-IN
remark CCP_ACL Category=1
permit udp any eq domain any
ip access-list extended SELF-DNS-OUT
remark CCP_ACL Category=128
permit ip any host 200.200.200.20
permit ip any host 200.200.200.4
ip access-list extended SELF-ICMP-TRAFFIC
remark CCP_ACL Category=128
permit ip any host 200.200.200.190
ip access-list extended SMTP-TRAFFIC
remark CCP_ACL Category=128
permit ip any host 200.200.200.140
ip access-list extended SMTPS-IN
remark CCP_ACL Category=1
permit tcp any any eq 465
permit tcp any any eq 587
ip access-list extended SMTPS-OUT
remark CCP_ACL Category=1
permit tcp any eq 465 any
permit tcp any eq 587 any
ip access-list extended SYSLOG-TRAFFIC
remark CCP_ACL Category=128
permit ip any host 200.200.200.32
ip access-list extended TRUSTED-HOSTS
remark CCP_ACL Category=128
permit ip host 230.211.70.35 any
permit ip host 230.211.70.60 any
logging 200.200.200.32
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 168.192.200.0 0.0.0.255
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 100 remark CCP_ACL Category=128
access-list 100 permit ip host 255.255.255.255 any
access-list 100 permit ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip 210.210.210.0 0.0.0.255 any
access-list 100 permit ip 200.200.200.0 0.0.0.255 any
access-list 102 remark CCP_ACL Category=2
access-list 102 permit ip 168.192.200.0 0.0.0.255 any
access-list 102 permit ip 192.168.1.0 0.0.0.255 any
dialer-list 1 protocol ip permit
no cdp run
route-map SDM_RMAP_1 permit 1
match ip address 102
control-plane
banner login ^CThis device is propoerty of FROGHOP and all activity is logged.^C
line con 0
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
line vty 5 15
privilege level 15
login local
transport input telnet ssh
scheduler allocate 20000 1000
ntp update-calendar
ntp server 192.189.54.17
ntp server 192.189.54.33
ntp server 203.161.12.165
ntp server 130.102.2.123
end
Thanks in advance for any tips.
Regards,
John. -
Server proxy - mandatory on Gateway Servers?
Can anyone confirm on this? Whether we should have the
server proxy enabled on the “Gateway Servers” as this act as proxy for other systems connecting through the gateway server..??
SCOM 2012 SP1
I don't see this is as a mandatory setting where we have this enabled in the Management servers..but there is no clear cut confirmation or answer on whther we should have this enabled againt the gateway servers. We have gateway
servers in DMZ and in other regions.
Since the MP which needs proxying – such as AD, cluster have agents which are spread across our gateway servers too..Just my thought of having it in gateway servers too…..but again ‘if Agent proxying’ is enabled on the agents
then I think that should be fine and it doesn’t need the server proxying on the gateway servers…this is sort of confusing for me, sorry, can someone please confirm on this.
Thanks,
NirmalThanks Roger..
That sounds like a convincing one..as you said gateway just pass through the data to the MS. And I also believe it is only required when gateway serve some special purpose - especially if it runs some workflows which requires agent proxying - like the
gateway server itself is a cluster resource or hold a DC or exchange role which is a remote possibility...
Thanks,
Nirmal -
SAP NW 7.0 AS JAVA Application Server Installation in DMZ : Win 2008 SR2
Dear Experts,
We are installing two AS JAVA application servers in DMZ (XYZ domain) and the central instance is running outside DMZ (ABC domain). While trying to give the profile path of the CI, in the application server installation, it says that the path cannot be found. We have opened the following ports 54200,54201,54204,54218,54230,3342,3641,3310,3610,8010,8011, and 25. The installation inside DMZ is run with a user which is part of local administration group. The DB (SQL 2008R2)is running on a different host in a distributed setup.
Could someone please let us know if any other port needs to be open to allow communication between the central instance and application server?
Help is appreciated.
KPIf FileSharing disabled, Firewal is open, unable to do ping test. How does the poor App server can access the Path from CI ?
Please request your network team to open firewal between CI and APP server otherwise, even if you install you might get other below access problems
1). user's in App server can't update CI
2). Jobs in App server might run as expected.
etc... -
Real Servers not connected to ACE VLAN and Real Servers are clients accessing the VIP
Hi,
I have a very strange set up and need some help to get my config working
I have a ASA firewall with three VLANs
VLAN 1 = Internet
VLAN 2 = DMZ
VLAN 3 = Goes to ACE
On the ACE I have four VLANs
VLAN 3 = Goes to ASA
VALN 4 = Web Server Tier
VALN 5 = DB Tier
VALN 6 = VIPs
Our Application team have asked us to create a New VIP on the ACE with real servers in DMZ (Server A and Server B)
And they have told us that the cleints accessing the VIP will be Server A and Server B
I have always created VIPs with real servers directly connected to the ACE but not connected elsewhere.
I belive I have a big challenge of opening ports on the firewall etc to get this set up working. Also, should i use some sort of NAT / SNAT?
Could anyone guide me on this setup please?
RajHi Raj,
First of all it is possible to add servers in ACE which are HOP away from ACE interfaces. Here servers are HOP away but there VIP is part of ACE interface subnet. The only need is that servers return traffic towards client should be passed through ACE (so that ACE can manitain states and chage the source IP of the reply packet from server IP to VIP on which client has requested the connection).
When servers are HOP away and ACE do not come in path between server and client then we have to to do SNAT for intial client request. This configuration will force the return traffic from server to ACE (as server will NAT IP as client IP).
In your case DMZ-VIP which is created for two real servers A and B, will be accesses by these servers only. So it is a situation of server accessing there own VIP. For this scenario to work we have to have SNAT (no matter whether servers are directly connected or HOP away). So best solution here is VIP in VLAN 3, Rserevrs for this VIP in DMZ, and SNAT client request, using free IP in VLAN 3.
Also you have to open ports on firewall for both "real server Probes" and actual application ports, moreover policies modification on firewall for allowing traffic from DMZ to ACE VIP, DMZ to NAT IP and there vice versa traffic. -
Public URL for Business Object servers
What is preferred method to access BO by external clients?
Here is our setup, 2 tomcat servers, 2 BO servers and F5 for load balancing
I am thinking to put 2 tomcat servers in DMZ and open up the ports for BO servers in the firewall.
I would like to know what all the options you guys have in your environments.Dennis,
Since we have clustered BO servers (2 node), for example, one CMS in each server, do we need to open one port in the firewall which is 6400 and assign that port to both the CMS or we need to assign different ports for each CMS, like 6400 for 1st CMS and 6411 for 2nd CMS? -
Manage SCCM 2012 clients in DMZ (OS Deploy, Windows updates) via DP/MP
Hi,
We ’d like to manage (=OS Deploy, Packages,Windows updates) Windows clients (Windows 2008/2012 R2 servers for now, about 20 of them) in a DMZ (= different domain).
There is this article
https://nikifoster.wordpress.com/2011/01/31/installing-configmgr-clients-on-servers-in-a-dmz/ which explains what to do … in 2011. Since then lots of things are changed I guess
Before I dive in, I’d need to have an overview + do some administrative tasks (like asking for firewall accesses).
Current setup DMZ:
Our SCCM 2012 R2 server is on a Windows 2008 R2 OS
Client communication is done via HTTP (not HTTPS)
An extra physical Distribution point is setup (only DP, nothing more) in our current domain
A new Windows 2012 server is setup in the DMZ which should host the DP and probably management point (since it should manage the clients over there)
There are clients in DMZ that are currenlty managed by SCCM 2007 but
this server will be phased out, these client have:
Correct sccm functionality
Correct DNS resolution
My steps/questions, please comment:
Add the DMZ ip range to SCCM 2012 boundary as “DMZ”
Add the network access account to be able to deploy as well clients as distribution point in DMZ
In the DMZ accesses on firewall for server VLAN have to be asked
When we have a distribution point and communication is “HTTP only” then http (port 80) from DMZ to sccm server should suffice, correct? Or are
extra firewall openings needed for management point access/packages and windows updates sync?
Now the sccm clients will be deployed to the servers in DMZ: deploy SCCM clients to hosts in DMZ, how this should be done: we connect a console to the SCCM-server in the DMZ then deploy the discovered clients?
OS Deploy should be made available, but no dhcp is available in DMZ and it is not an option either, therefore we would boot from an ISO then enter an ip (or pre-enter it so there is already filled in an ip?). So tasksequences/deployments
for servers in DMZ, where are they configured/deployed then? Via console access on DMZ management point or can we deploy on our domain SCCM management point (not in DMZ) and it will be synced to the DMZ management point? Not clear
Selective sync of software to this distribution point (howto? not sure), we don’t need any Windows 8 software/drivers to be synced.
Thanks for your input!
J.
Jan HoedtNo comment;
I think you mean the client push installation account and the site system installation account;
More ports are required, see site server > distribution point and distribution point > management point from the provided link;
The console will always be connected to your primary site server. The client will be pushed from the primary site server and it will provide the initial files. The other files will be downloaded from the local distribution point;
The task sequence deployment will be just like a normal taks sequence deployment. The only difference is the location of the server;
Only the content that's distributed to the distribution point in the DMZ will be available on that distribution point.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Exchange 2013 server DMZ..... Bad idea!
Hello and good day to all.
I am doing an exchange 2013 lab (Novice), and in doing my research, I found that placing your server in a DMZ is a very bad idea.... Can so one please explain? and what would be the best practices in insuring that your exchange server is not attacked by
any malicious user out there.
Regards
MattHi Matthew,
Please consider reading this http://blogs.technet.com/b/exchange/archive/2013/02/18/exchange-firewalls-and-support-oh-my.aspx
unlike Exchange2003 all other versions higher than Exchange2003 doesn't support DMZ due to tight integration with Active Directory. Only you can install Edge servers in DMZ.
Few ports are opened e.g 443,80 and 25
110 and 143 if using IMAP and POP (Assuming your have a firewall).
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.
Maybe you are looking for
-
recently i got a new DVD/CD drive for my laptop, from doing this I can no longer sync my iPod. I've been able to upload songs into my library but when i plug my iPod in iTunes doesn't reconize it. When i first open iTunes it's asking me that i need t
-
Packaging dll files in java application
Hi all, I am working on an application where I use some dll files from my java application. Now I would like to package the application so that end users can easily install and use them. the Java application is currently packaged as a jar file. How t
-
Online chat, Nov. 12, on Regular Expressions
One of the new packages added in J2SE v 1.4 is java.util.regex , which provides classes for handling regular exprssions. A regular expression is a string pattern that can be used to perform sophisticated string searching and replacement. Learn more a
-
I keep getting the "Something went wrong" message on my Droid Razr HD also. I looked in my Settings, and I don't have a Cloud app - I have a Cloud Print app with nothing cached. This is making it nearly impossible to use the phone - please help! So
-
I know it is an interesting question but I started newly to JDBC and I do not know how I can differ the database files like access files and the JDBC because the JDBC is just a java package java.sql.* I am so confused; what is driver? what is Class.f