Service contarcts and sending materials to vendor

Dear friends,
We have got plant maintenance module.
We have got the contract with vendor for servicing the equipment. Equipment has got the various motors,bearings,,etc .
we need to send the motor to the vendor for repairs,it is the requirement from Plant Maintenance Module.
In this scenario,what is the integration between MM and PM modules. And how to map it.
If it is considered as Service contract .How to send the motors/Materials for repairs to the vendor.
How to track these materials sending to vendor and how to map in SAP.
Regards,
Canand

Hi,
Master records (Material master or equipment master) are defined for the main equipment,motor and bearings.While defining a main equipment master in PM module we have to link or assign the related materials or equipments (motor,bearings) to the main equipment.
And while creating a plant maintenance order we can define with the item category that the equipment is repaired at the external vendor.When we select that perticular item category system proceeds us to create a external service order with reference to this PM order.
Regards,
ramabhupala reddy

Similar Messages

How to generate payment advice in F110 and send it to Vendors Via Email

Dear SAP Experts
Could anybody tell me how to generate payment advice in F110 and send it to Vendors Via Email?
It would be much appreciated if someone can provide the configuration procedure, thanks so much in advance.
Cheers & Best Regards
Ray

Hi Sama,
Thanks for your post, here I just share some of my idea.
The following step is to configure the payment advice.
In OBVU (payment methods in cpy code) I entered my payment advice form
In OBVU (payment methods in cpy code) set "Always pyt advice"
In OBVCU (payment method by country) leave the payment medium program (RFFOD__T)
For the email sending program, should develp some customized program to realize that, Thanks.
Cheers & Best Regards
Ray

New business scenario for reapir from customer and sending them to vendor.

Hello team,
We have a scenario where we need to configure in the system -
We recieve a material from my customer for repair.We need to send this to my vendor who will repair it and send them back to Us. On this we recieve revenue from the customer and pay i pay half amount my vendor for the service.
We are following above scenario in SAP as
In the first step
The production team create a serviece order in IW31 for the material that need to send to the vendor, which was recieved from the customer. When service order is created in the back end a Purchase requisition is created.
In next step we created a PO w.r.f to the above PR and we need to send this to vendor on subcontracting so that we can track the material from him after the repair.
The problem is --- When PR is created automatically during serviece order creation (iw31) we are unable to create Po with Item category L (subcontracting) because PR is not created with L.We are even unable to change L in PR since it is created automatically at the background.We ried to change the field at document type in spro. But no luck.
Pls let us know is there any other business process where we can handle this situation or any technical help to change the PR.
Regards,
L.chaitanya.

Hi,
please work out in this way...
It can be done Using PM02 and PM03 control keys. Select the operation row select the External button in the bottom u will find Sub con check box u can click it .The prerequisities are create a material BOM in the bom as L item select a row and click the item which will be near to the header cap 2nd tab status/long text click it .Mat. Provision Ind select Lor X if it is not available go to IMG setting.Plant maintenance ->Master Data in Plant Maintenance and Customer Service->Bills of Material->Item Data->Define Material Provision Indicators, K&L will be standrad create S Rework Material,XRework Material from Subcontrmake a tick mark in Recursivity of Subcontracting Component and save it . while creating the material to the operation to be assigned from bom then in the component select the row go to the general button in the bottom then Mat. Prov. Ind will be there select rework material the system allows you to proceed further . save the order then check the PR it will be Account assignment will be F and Item categeory will be L selected automatically.
Then create PO then do MB1b (prerequsitie the material should have stock)using PO reference( movement type 541) the it will be moved to the vendor stock (check with mmbe)
Aganist PO Material sent to the vendor .While doing Goods Recipt do with MB01with movement type 101, now u can check the stock in mmbe it will be in storage location...
Kuber

Convertion of Smart form to pdf and sending mail to vendor for PO

Hello all,
I have modified a standard PO Smartform and running it through ME23N.
In this i have to convert it to a pdf file and then send it through mail to the vendor.
I have found out FMs'CONVERT_OTF'and
'SO_NEW_DOCUMENT_ATT_SEND_API1'
to convert it and send mail. But can u tell me how to go about using it.
As i am using a standard program do i have to copy this prog to zprog and then call the fm out there. I am not sure.
Thanks
Salil

Hi,
Here is the sample code.If you find this as useful,kindly reward points by clicking the star on the left of reply.
Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
      i_tline TYPE TABLE OF tline WITH HEADER LINE,
      i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
      i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
      i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
      i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
      w_objhead TYPE soli_tab,
      w_ctrlop TYPE ssfctrlop,
      w_compop TYPE ssfcompop,
      w_return TYPE ssfcrescl,
      w_doc_chng typE sodocchgi1,
      w_data TYPE sodocchgi1,
      w_buffer TYPE string,"To convert from 132 to 255
Variables declarations
      v_form_name TYPE rs38l_fnam,
      v_len_in LIKE sood-objlen,
      v_len_out LIKE sood-objlen,
      v_len_outn TYPE i,
      v_lines_txt TYPE i,
      v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
     exporting
          formname           = 'ZZZ_TEST2'
     importing
          fm_name            = v_form_name
     exceptions
          no_form            = 1
          no_function_module = 2
          others             = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
     EXPORTING
          control_parameters = w_ctrlop
          output_options     = w_compop
          user_settings      = 'X'
     IMPORTING
          job_output_info    = w_return
     EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
     EXPORTING
          format                = 'PDF'
          max_linewidth         = 132
     IMPORTING
          bin_filesize          = v_len_in
     TABLES
          otf                   = i_otf
          lines                 = i_tline
     EXCEPTIONS
          err_max_linewidth     = 1
          err_format            = 2
          err_conv_not_possible = 3
          OTHERS                = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Convert PDF from 132 to 255.
LOOP AT i_tline.
Replacing space by ~
TRANSLATE i_tline USING ' ~'.
CONCATENATE w_buffer i_tline INTO w_buffer.
ENDLOOP.
Replacing ~ by space
TRANSLATE w_buffer USING '~ '.
DO.
i_record = w_buffer.
Appending 255 characters as a record
APPEND i_record.
SHIFT w_buffer LEFT BY 255 PLACES.
IF w_buffer IS INITIAL.
    EXIT.
ENDIF.
ENDDO.
Refresh: i_reclist,
         i_objtxt,
         i_objbin,
         i_objpack.
clear    w_objhead.
Object with PDF.
i_objbin[] = i_record[].
DESCRIBE TABLE i_objbin LINES v_lines_bin.
Object with main text of the mail.
i_objtxt = 'Find attached the output of the smart form.'.
APPEND i_objtxt.
i_objtxt = 'Regards,'.
APPEND i_objtxt.
i_objtxt = 'J.Jayanthi'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
Document information.
w_doc_chng-obj_name = 'Smartform'.
w_doc_chng-expiry_dat = sy-datum + 10.
w_doc_chng-obj_descr = 'Smart form output'.
w_doc_chng-sensitivty = 'F'. "Functional object
w_doc_chng-doc_size = v_lines_txt * 255.
Pack to main body as RAW.
Obj. to be transported not in binary form
CLEAR i_objpack-transf_bin.
Start line of object header in transport packet
i_objpack-head_start = 1.
Number of lines of an object header in object packet
i_objpack-head_num = 0.
Start line of object contents in an object packet
i_objpack-body_start = 1.
Number of lines of the object contents in an object packet
i_objpack-body_num = v_lines_txt.
Code for document class
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Packing as PDF.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'Smartform'.
CONCATENATE 'Smartform_output' '.pdf'
INTO i_objpack-obj_descr.
i_objpack-doc_size = v_lines_bin * 255.
APPEND i_objpack.
Document information.
CLEAR i_reclist.
e-mail receivers.
i_reclist-receiver = '[email protected]'.
i_reclist-express = 'X'.
i_reclist-rec_type = 'U'. "Internet address
APPEND i_reclist.
Sending mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
     EXPORTING
          document_data              = w_doc_chng
          put_in_outbox              = 'X'
     TABLES
          packing_list               = i_objpack
          object_header              = w_objhead
          contents_hex               = i_objbin
          contents_txt               = i_objtxt
          receivers                  = i_reclist
     EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Convertion of Smart form to pdf and sending mail to vendor for Invoice

Hi All...
now I am getting the output form of Invoice by the T-code VF02
here Im using Zreport & Zform...
my requirment is to convert smartform output to PDF and send as an e-mail attachment on my Existing report
where I use the FM - CONVERT_OTF_2_PDF ..
here my code
REPORT yinvoice_is.
TABLES: vbrk,vbrp, vbak, vbap, vbkd .
DATA : it_vbap TYPE STANDARD TABLE OF vbap WITH HEADER LINE ,
       it_vbrk LIKE STANDARD TABLE OF vbrk with header line,
       it_vbkd TYPE STANDARD TABLE OF vbkd WITH HEADER LINE ,
       it_vbrp TYPE STANDARD TABLE OF vbrp WITH HEADER LINE ,
       it_vbrp1 TYPE STANDARD TABLE OF vbrp WITH HEADER LINE ,
       it_vbfa TYPE STANDARD TABLE OF vbfa WITH HEADER LINE ,
       it_adrc1 TYPE STANDARD TABLE OF adrc WITH HEADER LINE,
       it_adrc2 TYPE STANDARD TABLE OF adrc WITH HEADER LINE.
DATA: sum TYPE vbrp-kzwi5.
DATA: v_vkbur TYPE vkbur,
      v_adrnr1 TYPE adrnr,
      v_adrnr2 TYPE adrnr,
      v_vbelv TYPE vbelv,
      v_delch TYPE vbeln,
      v_bstkd TYPE bstkd,
      v_kdmat TYPE kdmat,
      v_kwert TYPE kwert.
DATA : fm_name TYPE rs38l_fnam.
PARAMETER p_inv_no LIKE vbrk-vbeln OBLIGATORY .
Selecting Data
SELECT VBELN
        ERDAT
        VKORG
        KUNRG
        STCEG
        NETWR
        MWSBK
        KNUMV
        KUNAG
        REGIO
FROM vbrk
INTO CORRESPONDING FIELDS OF TABLE it_vbrk
WHERE vbeln = p_inv_no .
SELECT matnr
       kzwi1
       kzwi2
       kzwi3
       kzwi4
       kzwi5
       netwr
       mwsbp
       meins
       fklmg
       arktx
       FROM vbrp
INTO CORRESPONDING FIELDS OF TABLE it_vbrp
WHERE vbeln = p_inv_no .
Selecting Sales Order No.
SELECT SINGLE vbelv
FROM vbfa
INTO v_vbelv
WHERE vbeln = p_inv_no
AND   vbtyp_v = 'C'.
IF sy-subrc = 0.
Selecting Delivery Challan...
SELECT SINGLE vbeln
    FROM vbfa
    INTO v_delch
    WHERE vbelv = v_vbelv
    AND   vbtyp_n = 'J'.
SELECT SINGLE bstkd
    FROM vbkd
    INTO v_bstkd
    WHERE vbeln = v_vbelv .
SELECT matnr kdmat
    FROM vbap
    INTO CORRESPONDING FIELDS OF TABLE it_vbap
    WHERE vbeln = v_vbelv.
ENDIF.
READ TABLE it_vbrk INDEX 1.
IF sy-subrc = 0.
SELECT SINGLE kwert
    FROM konv
    INTO v_kwert
    WHERE knumv = iT_vbrk-knumv
    AND   kschl = 'HD00'.
ENDIF.
Selecting From Address
SELECT SINGLE vkbur
FROM vbak
INTO v_vkbur
WHERE vbeln = v_vbelv.
IF sy-subrc = 0.
SELECT SINGLE adrnr
    FROM tvbur
    INTO v_adrnr1
    WHERE vkbur = v_vkbur.
IF sy-subrc = 0.
    SELECT SINGLE *
      FROM adrc
      INTO CORRESPONDING FIELDS OF it_adrc1
      WHERE addrnumber = v_adrnr1.
      APPEND it_adrc1.
ENDIF.
ENDIF.
APPEND it_adrc.
Selecting TO Address
SELECT SINGLE adrnr
FROM vbpa
INTO v_adrnr2
WHERE vbeln = p_inv_no
AND   parvw = 'RE'.
IF sy-subrc = 0.
SELECT SINGLE *
    FROM adrc
    INTO CORRESPONDING FIELDS OF it_adrc2
    WHERE addrnumber = v_adrnr2.
    APPEND it_adrc2.
ENDIF.
Calling Function Module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname                 = 'YINVOICE_IS'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   fm_name                  = fm_name
EXCEPTIONS
NO_FORM                  = 1
NO_FUNCTION_MODULE       = 2
OTHERS                   = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Calling Function Module
CALL FUNCTION fm_name
*'/1BCDWB/SF00000496'
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
    i_vbelv                    = v_vbelv
    i_bstkd                    = v_bstkd
    i_kdmat                    = v_kdmat
    i_kwert                    = v_kwert
    i_delch                    = v_delch
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    it_vbrk                    = it_vbrk
    it_vbrp                    = it_vbrp
    it_vbap                    = it_vbap
    it_adrc1                   = it_adrc1
    it_adrc2                   = it_adrc2
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "ENTRY

hi,
use this code..
DATA: i_otf    TYPE itcoo OCCURS 0 WITH HEADER LINE,
      i_tline TYPE TABLE OF tline WITH HEADER LINE,
      i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
      i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
      i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Variables declarations
      v_len_in LIKE sood-objlen,                            "#EC NEEDED
      v_lines_txt TYPE i,
      v_lines_bin TYPE i,
Work Area declarations
      w_ctrlop    TYPE ssfctrlop,
      w_return    TYPE ssfcrescl,
      w_compop    TYPE ssfcompop,
      wa_objhead TYPE soli_tab,
      wa_doc_chng TYPE sodocchgi1,
      wa_buffer   TYPE string.            "To convert from 132 to 255
Put a IF ELSE condition whether u want form output or E-mail output..
if it is a E-mail.. then call a small Sub-routine within your program..
FORM f_email .
w_ctrlop-getotf    = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION fnam
    EXPORTING
      control_parameters = w_ctrlop
      output_options     = w_compop
      nast               = nast
      v_tcode            = v_tcode
    IMPORTING
      job_output_info    = w_return
    TABLES
      it_vbdkr           = it_tvbdkr[]
      it_vbdpr           = tvbdpr[]
      it_zglentitycode   = it_zglentitycode[]
      it_vttk            = it_vttk[]
      it_kna1            = it_kna1[]
      it_t005            = it_t005[]
      it_adrc            = it_adrc[]
      it_ekpo            = it_ekpo[]
      it_ekko            = it_ekko[]
      it_vbrp            = it_vbrp[]
      it_mara            = it_mara[]
      it_vbrk            = it_vbrk[]
      it_likp            = it_likp[]
      it_vttp            = it_vttp[]
      it_t001            = it_t001[]
      it_zlogdely        = it_zlogdely[]
      it_prod            = it_prod[]
      it_lineitems       = it_lineitems[]
      it_tvzbt           = it_tvzbt[]
      it_t173t           = it_t173t[]
      it_t005t           = it_t005t[]
      it_zplant          = it_zplant[]
      it_stxbitmaps      = it_stxbitmaps[]
      it_prod_desc       = it_prod_desc[].
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
*Converting the OFT format data to PDf format
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format        = 'PDF'
      max_linewidth = 132
    IMPORTING
      bin_filesize = v_len_in
    TABLES
      otf           = i_otf
      lines         = i_tline.
LOOP AT i_tline.
    TRANSLATE i_tline USING '~'.
    CONCATENATE wa_buffer i_tline INTO wa_buffer.
ENDLOOP.
TRANSLATE wa_buffer USING '~'.
DO.
    i_record = wa_buffer.
    APPEND i_record.
    SHIFT wa_buffer LEFT BY 255 PLACES.
    IF wa_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
Attachment
REFRESH:
    i_reclist,
    i_objtxt,
    i_objbin,
    i_objpack.
CLEAR wa_objhead.
i_objbin[] = i_record[].
Create Message Body
Title and Description
i_objtxt = 'COMMERCIAL INVOICE'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
READ TABLE i_objtxt INDEX v_lines_txt.
wa_doc_chng-obj_name   = 'COMMERCIAL INVOICE'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'COMMERCIAL INVOICE'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size   = v_lines_txt * 255.
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num   = 0.
i_objpack-body_start = 1.
i_objpack-body_num   = v_lines_txt.
i_objpack-doc_type   = 'RAW'.
APPEND i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num   = 0.
i_objpack-body_start = 1.
DESCRIBE TABLE i_objbin LINES v_lines_bin.
READ TABLE i_objbin INDEX v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'COMMERCIAL INVOICE'.
i_objpack-obj_descr = 'COMMERCIAL INVOICE'.
APPEND i_objpack.
IF it_adr6[] IS NOT INITIAL.
    LOOP AT it_adr6 INTO wa_adr6.
      CLEAR i_reclist.
      i_reclist-receiver = wa_adr6-smtp_addr.
      i_reclist-rec_type = 'U'.
      i_reclist-com_type = 'INT'.
      APPEND i_reclist.
    ENDLOOP.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data = wa_doc_chng
        put_in_outbox = 'X'
      TABLES
        packing_list = i_objpack
        object_header = wa_objhead
        contents_bin = i_objbin
        contents_txt = i_objtxt
        receivers     = i_reclist.
ENDIF.
ENDFORM.                    " f_email
regards
vijay

Document style web service receive and send org.w3c.Element

All,
I have created a simple Document-oriented web service and deployed to a standalone OC4J container using the following code:
********************* Interface ***********************
import org.w3c.dom.*;
interface PrimeNumberService
//method to check the primality of the number passed in Element variable
public Element isPrime(Element e) ;
******************** Implementation *******************
@version 1.0
Development Environment : Oracle9i JDeveloper
Name of the File : PrimeNumberServiceImpl.java
Creation/Modification History :
13-Apr-2002 Created
Overview:
This class file defines methods to implement PrimeNumberWebService.
The method isPrime() is exposed by the Web Service.
import org.w3c.dom.*;
import oracle.xml.parser.v2.*;
import java.io.*;
public class PrimeNumberServiceImpl implements PrimeNumberService
public PrimeNumberServiceImpl()
* This method is exposed by the Web Service to check if the number is
* prime. It extracts the number for input element and checks if it is
* prime or not and return the output in the XML Element.
* The input element is of the form <number>23</number>
public Element isPrime(Element e)
// define an XML Element that will be returned to the client
Element processedEl=null;
try{
// get the first clild of input element
Node enode = e.getFirstChild();
//get the value of input element and parse it
String value= enode.getNodeValue();
double number = Double.parseDouble(value);
String answer=null;
// check if the input number is prime
answer = checkPrime(number);
// create element from the answer
processedEl =createElement(answer);
}catch(Exception ex){
ex.printStackTrace();
return null;
// return output to client
return processedEl;
* This method creates an XML element from the input string values and return it
* The Element is of the form <answer>value</answer>
private Element createElement(String value){
// create a Document object
Document xmldoc = new XMLDocument();
// create an element with name "answer"
Element e1 = xmldoc.createElement("answer");
// append the element to document object
xmldoc.appendChild(e1);
// create a Text object from input values and append it to above element
Text t = xmldoc.createTextNode(value);
e1.appendChild(t);
return (Element)xmldoc.getFirstChild();
* This method check if the input number is prime or not
private String checkPrime(double num){
//For a prime number mod(power(2,number),number) is equal to 2
if ( Math.IEEEremainder( Math.pow(2.0,num) ,num)==2){
System.out.println ("the number is: " + num);
return "The number " + num + " is prime";}
else{
System.out.println ("the number is: " + num);
return "The number " + num + " is not prime";}
************************ Generated WSDL ***************
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="PrimeNumberService"
targetNamespace="http://tempuri.org/PrimeNumberService.wsdl"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://tempuri.org/PrimeNumberService.wsdl"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" >
<documentation>
WSDL for Service: PrimeNumberService, generated by Oracle WSDL toolkit (version: 1.1)
</documentation>
<types>
<schema targetNamespace="http://tempuri.org/PrimeNumberService.xsd" xmlns:tns="http://tempuri.org/PrimeNumberService.xsd" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema"/>
</types>
<message name="isPrimeOutput">
<part name="return" element="xsd:any"/>
</message>
<message name="isPrimeInput">
<part name="param0" element="xsd:any"/>
</message>
<portType name="PrimeNumberServicePortType">
<operation name="isPrime">
<input message="tns:isPrimeInput"/>
<output message="tns:isPrimeOutput"/>
</operation>
</portType>
<binding name="PrimeNumberServiceBinding" type="tns:PrimeNumberServicePortType">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/>
<operation name="isPrime">
<soap:operation soapAction="urn:PrimeNumberService/isPrime"/>
<input>
<soap:body use="literal" namespace="urn:PrimeNumberService"/>
</input>
<output>
<soap:body use="literal" namespace="urn:PrimeNumberService"/>
</output>
</operation>
</binding>
<service name="PrimeNumberService">
<port name="PrimeNumberServicePort" binding="tns:PrimeNumberServiceBinding">
<soap:address location="http://hp-xeon-01:9799/primenumberws/primenumberService"/>
</port>
</service>
</definitions>
I get the following error when trying to deploy:
Error:
[Error ORABPEL-10902]: compilation failed
[Description]: XML parsing failed because "undefined part element.
In WSDL at "http://hp-xeon-01:9799/primenumberws/primenumberService?WSDL", message part element "{http://www.w3.org/2001/XMLSchema}any" is not defined in any of the schemas.
Please make sure the spelling of the element QName is correct and the WSDL import is complete.
[Potential fix]: n/a.
Please let me know what I'm doing wrong.
Regards,
Jeff

Here is the error code that I'm getting at the invoke:
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>Client</code>
</part>
<part name="summary">
<summary>parsing error: oracle.xml.parser.v2.XMLParseException: Expected name instead of /.</summary>
</part>
<part name="detail">
<stackTrace xmlns="http://xml.apache.org/axis/">parsing error: oracle.xml.parser.v2.XMLParseException: Expected name instead of /. at org.collaxa.thirdparty.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221) at org.collaxa.thirdparty.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128) at org.collaxa.thirdparty.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1083) at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source) at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XMLParser.parse(Unknown Source) at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source) at javax.xml.parsers.SAXParser.parse(Unknown Source) at org.collaxa.thirdparty.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:226) at org.collaxa.thirdparty.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:645) at org.collaxa.thirdparty.apache.axis.Message.getSOAPEnvelope(Message.java:424) at org.collaxa.thirdparty.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62) at org.collaxa.thirdparty.apache.axis.client.AxisClient.invoke(AxisClient.java:173) at org.collaxa.thirdparty.apache.axis.client.Call.invokeEngine(Call.java:2725) at org.collaxa.thirdparty.apache.axis.client.Call.invoke(Call.java:2708) at org.collaxa.thirdparty.apache.axis.client.Call.invoke(Call.java:1738) at com.collaxa.cube.ws.wsif.providers.axis.WSIFOperation_ApacheAxis.invokeAXISMessaging(WSIFOperation_ApacheAxis.java:1902) at com.collaxa.cube.ws.wsif.providers.axis.WSIFOperation_ApacheAxis.invokeRequestResponseOperation(WSIFOperation_ApacheAxis.java:1464) at com.collaxa.cube.ws.wsif.providers.axis.WSIFOperation_ApacheAxis.executeRequestResponseOperation(WSIFOperation_ApacheAxis.java:1029) at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:455) at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:359) at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:161) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:605) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:317) at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195) at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3501) at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1906) at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:101) at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:186) at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5604) at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1301) at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke(CubeEngineBean.java:117) at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvoke(CubeEngineBean.java:146) at ICubeEngineLocalBean_StatelessSessionBeanWrapper0.syncCreateAndInvoke(ICubeEngineLocalBean_StatelessSessionBeanWrapper0.java:483) at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequestAnyType(DeliveryHandler.java:489) at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequest(DeliveryHandler.java:425) at com.collaxa.cube.engine.delivery.DeliveryHandler.request(DeliveryHandler.java:132) at com.collaxa.cube.ejb.impl.DeliveryBean.request(DeliveryBean.java:82) at IDeliveryBean_StatelessSessionBeanWrapper22.request(IDeliveryBean_StatelessSessionBeanWrapper22.java:479) at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:101) at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:65) at ngDoInitiate.jspService(_ngDoInitiate.java:220) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:347) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810) at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:121) at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:267) at displayProcess.jspService(_displayProcess.java:303) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:347) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322) at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:220) at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:138) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:649) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)</stackTrace>
</part>
</remoteFault>

Procedure for inwarding and sending materials if i am a sub-contractor

Dear friends,
We are doing job work for our customers. They are also having SAP, so that they are sending the child material through MB1B - 541 mov and receiving the finished goods throug GR against the PO placed on us.
Now my query is how can i inward the child material inside of our organization and how can i send the finished part to my customer.
Inward the chils part > Converting to finished part (Activity to be captured)> Send it to customer through invoice.
What is the SAP standard procedure for the above process..
Kindly send the actual procedures and what is process you are following to do sub-contracting operations for customers.
Regards,
M.Selvaganesh,

Is your system is also SAP.?
When you receive components in system, you need to take to your stock, may be same material no. or different as per your wish.
Here actually the components are logically stays with the owner as Subcontractors place.
Upon receipt of finished good, it will be consumed.
So both are stand alone system.

Convert PO into PDF format and send by an email to vendor

We are using SAP version ECC 5.0. We want to convert SAP PO into PDF format and attached it in an email and send it to vendor. Please give me some tips to achieve this?
Thanks in advance!
Mrudula

Hi!
The way to achieve your goal depends on how you get PO printed - by sapscript, smartform or abap list.
As have been mentioned you can create spool request and process it. But for sapscript and smartform you can proceed without spool request - just get back OTF data from corresponding FM and convert it to PDF.
In case of smartform:
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZFORMNAME'
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i_otf[] = w_return-otfdata[].
In case of sapscript:
options-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
options = options
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
otfdata = i_otf
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
OTHERS = 5.
Then convert to PDF
DATA:
pdf LIKE tline OCCURS 100 WITH HEADER LINE,
v_len_in LIKE sood-objlen.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   format                      = 'PDF'
   max_linewidth               = 132
ARCHIVE_INDEX               = ' '
IMPORTING
   bin_filesize                = v_len_in
    TABLES
      otf                         = i_otf
      lines                       = pdf
   EXCEPTIONS
     err_max_linewidth           = 1
     err_format                  = 2
     err_conv_not_possible       = 3
     OTHERS                      = 4
Then send as attachment as Max proposed.
Regards,
Maxim.

Who can copy and send me Qosmio G30-117 Recovery DVD

I don't have recovery DVD.My friend buy it for me from England and bring it to me.We didn't find the recovery DVD in the pack.I asked the seller,but they didn't interested with my problem.I asked Toshiba service in Turkey,but they said me they couldn't give or sell me a new recovery DVD.I have windows xp mce licence key.How can I resolve this problem.Could anyone send me a copy of G30's recovery DVD?,could anyone help me?

Hi, Thanks your interest with my problem. I live in istanbul/Turkey. My friend who bought qosmio for me didn't help me.
Someone gave me Toshiba service center telephone in England, but I speak english very little. I can inform the notebook's serial number, model, etc.
Could someone help me to buy Recovery DVD from the service center and send it to my address. I can pay through PayPal or another way.
Thaks everybody.

Materials from Vendor A and Excise invoice from Vendor B???

Hi experts
Can amybody tel me HOW TO DO???
i have created PO for exciseable material to vendor A
I have to do GR for the same from Vendor B (Vendor A 'll inform to Vendor B send materials and excise invoice to customer)
How i can capture excise duty from other vendor.
So how system will take othere vendor for excise duty capture ...??
Thanks
SAP-MM

hi umakanth
Thanks for ur response,
I have maintained invoicing party as differeent vendor in partners tab at header level in PO.
Even though if i maintaind invoicing party is different m buut while capturing excise duty its takeing the PO vendor only, not invoicing party vendor coed in Partners tab at header level in PO.
So can u tel me , how we can capture excise invoice from a vendor differ from PO vendor .
Thanks
SAP-MM

Today my phone was stolen, so i called my service provider and had my account suspended. then i found it at a pawn shop, so i reactivated it. however, my phone says that it has no SIM and I am unable to send/recieve any messages. how can i fix it?

Today while I was at work my phone was stolen. After unsuccessfully trying to track down the kids who had it, I called my service provider and asked them to suspend my account. A short time later, I found my phone at a local pawn shop and called to reactivate my phone's service. The woman on the phone said that it should only take a few minutes to reactivate. However, a coworker also told me that whenever a theft gets reported to the service provider, apple puts your phone's serial number on a list that disables yours phone's re-enactment until the service provider confirms that the phone has been found. I'm not sure if this is true, but my phone should have been working a few hours ago, and it still says that there is no SIM everytime I try to send a message. Should I just wait it out or is it more likely to be at the fault of my service provider?
Thanks!

The SIM question/issue is separate from all of the others. Your iPhone will not access the cellular newtwork until you install a new SIM. The current SIM has been deactivated and is now useless. Get a new SIM, install it (or have it installed), then have your carrier grant the iPhone access to the cellualr network.

Sending plain request to web service using receiver sender adapter and PI and expecting as attachment as response

Hi
In my scenario,we are sending plain request to web service using receiver sender adapter and PI will receive response as excel attachment. What are standard module required to achieve this and sequence? or checking Keep attachment box will help us to achieve this?
is it possible to receive excel sheet as attachment from receiver soap adapter ?
Thanks in Advance

Hi,
This issue might be due to the invalid .pem certificate file.
Make sure to include the beginning and end tags on each certificate.
The result should look like this:
-----BEGIN CERTIFICATE-----
(Your Primary SSL certificate: your_domain_name.crt)
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
(Your Intermediate certificate: DigiCertCA.crt)
-----END CERTIFICATE-----
For more detailed information, you could refer to:
https://www.digicert.com/ssl-support/pem-ssl-creation.htm
Regards

Connecting and sending data to web service

Hi,
I have to implement the functionality in PDF document to connect with the web service and send the form data in xml format on Click event of a button inside the form.
During the initial development and testing I have found that document can only connect with the Web Service from within LiveCycle Designer or Adobe Pro. It doesn't work with the Reader.
After surfing the internet I have come to know that Reader extensions are required along with Adobe Reader to communicate with the web services. Am I right?
Furthermore, what I have to do is to distribute the PDF form to a number of people who will fill the form and submit the form data by clicking the Submit button (which will internally communicate with the web service to send data) on the form. So if extensions are required to communicate with web services from Reader, then what I am assuming is that all those people must have extensions installed on their machines along with Reader.
On some forum I have also read that you only need to install the Extensions on the Designer machine and they are not compulsory to be on every client machine. i.e. Exntesions enable the web services communication features in the PDF form during design time. Is it true?
Thanks in anticipation,
Qarshi

Be careful, your question should be posted in "LiveCycle Reader Extensions" forum. LiveCycle Data Services doesn't deal with these features.
Nevertheless, to use webService calls from a PDF opened in the free Adobe Reader, you need to Reader extend your form.
You can use Acrobat Pro to extend it if the PDF will not be used by more than 500 people.
If you plan to reach more than 500 people, then you must consider LiveCycle Reader Extensions. This limitation is explained in the Acrobat EULA.
The final users only need the Adobe Reader, they won't have to install any extension or plug-in.

Monitoring a remote service, then starting and sending notfification

0
Hi-
I am a PS newbie so forgive me if this has been answered. We are migrating to SCOM2012 but have 1 2000 server that needs 1 service running on it. Since SCOM2012 can't monitor 2000 servers I need to monitor this service somehow.
I am trying to write a Poweshell script that will:
1. Detect is the remote machine is up via PING, IF so proceed to step 2 if not then QUIT
2. Get the state of a service on a remote machine (i.e. Get-WmiObject -computer S00APP07 Win32_Service -Filter "Name='Messenger'")
If the service resturns a result of STARTED then quit otherwise proceed to step 3
3. Start the service and send an e-mail to [email protected]
4. Wait 30 seconds then goto STEP 2.
So the result is that if the script finds the machine via ping it will then determine if the service is running or not. If the service is running the script will quit otherwise it will try to restar the service, send me an e-mail and then check again to see
if the service is running.
I had this mostly running in a standard cmd shell script but the "IF STATE 4 GOTO :END" isn't working and I'd rather do it in powershell
Ping Server | find "Reply"
if errorlevel 1 echo NG && goto :END
:BEGIN
sc \\Server querymessenger | find "STATE"
IF STATE 4 GOTO :END
sendmail -f [email protected] -t [email protected] -m THe service stopped and was sent a restart command via this batch file. This batch file will try to restart the service every 30 seconds until it is started. If you receive multiple copies of this e-mail
the auto restarting of the service was not sucessful and needs manual intervention. -u X Service on Server -s EMAILSERVER
SC \\SERVER START MESSENGER
PING -n 30 127.0.0.1 >nul
sc \\Server query Messenger | find "STATE"
IF ERRORLEVEL 1 GOTO :BEGIN
:END
If you have a good poweshell script that would do this I would appreciate it.

There are a few different ways to accomplish this task. The way that matches what you had in a batch file is something like this:
$email = @{
To = '[email protected]'
From = '[email protected]'
SMTPServer = 'server.domain.com'
Subject = 'Messenger Service on S00APP07'
If (Test-Connection -Computer S00APP07 -Count 1 -Quiet) {
$Service = Get-WmiObject -computer S00APP07 Win32_Service -Filter "Name='Messenger' AND State='Stopped'"
If ($Service) {
$Return = ($Service.StartService()).ReturnValue
If ($ReturnValue -eq 0) {
Start-Sleep -Seconds 10
If ($Service = Get-WmiObject -computer S00APP07 Win32_Service -Filter "Name='Messenger' AND State='Running'") {
$email.body = 'Messenger Service successfully restarted on S00APP07'
Send-MailMessage @Email
} Else {
$email.body = 'Unable to start Messenger service on S00AP07'
Send-MailMessage @Email
} Else {
$email.body = ("Unable to start Messenger service on S00AP07/ Error code returned: {0}" -f $returnvalue)
Send-MailMessage @Email
You should could also look at using WMI Eventing (Register-WMIEvent) to watch that service and send out alerts when it stops. For a more permanent solution, you should look at permanent event consumers (http://msdn.microsoft.com/en-us/library/windows/desktop/aa393014%28v=vs.85%29.aspx).
Not sure if it is usable in Win2K, but something to look at.
Boe Prox
Blog |
PoshWSUS | PoshPAIG |
PoshChat

Watch incoming emails and send to web service

I want to watch an email account; each email that comes in I want to package up and send to a webservice to process. All these emails will contain xml as the body of the email and I need to extract the xml, map it to a different schema and add it to an httpRequest
to send to a url:port for further processing. I will be building the web service as well as the exchange listener.
Also: We are using Exchange Server 2010 Version 14.01.0438.000 and VB.Net the web service will be an asp.net Web Service

To watch a Mailbox Folder for new email in EWS you can use Streaming notifications
http://msdn.microsoft.com/en-us/library/office/dn458792(v=exchg.150).aspx and subscribe to the NewMailEvent . Or you can poll the Mailbox at interval using pull notifications.
Cheers
Glen

Service contarcts and sending materials to vendor

Similar Messages

Maybe you are looking for