Service Price in pr

Hi SAP Gurus,
If I create a purchase requisition with item category D (services) and I use a service master with a valid price in service condition maintained via ML5L, is the price then automatically retrieved in the PR line by standard SAP??
If this is not standard, is there an user exit which can be activated to retrieve the price from condition and copy it to the PR service line.
Please provide me with possible alternatives/solutions for retriving price from service condition to PR service line.
Regards, Kannan.

>
KANNAN NARSIPALLI wrote:
> Hi SAP Gurus,
>
> If I create a purchase requisition with item category D (services) and I use a service master with a valid price in service condition maintained via ML5L, is the price then automatically retrieved in the PR line by standard SAP??
>
> If this is not standard, is there an user exit which can be activated to retrieve the price from condition and copy it to the PR service line.
>
> Please provide me with possible alternatives/solutions for retriving price from service condition to PR service line.
>
> Regards, Kannan.
If service conditions are maintained and combination of condition is entered in the line item, it will automatically pick up price from the service condition maintained. This is standard sap setting.

Similar Messages

The Condition for service price determination incomplete

Dear experts,
I run the System with EC&O Best Practice. Howerver, I can not enter Services on tab Service of Sales Order: Short text of Service, Quantity, UOM, Gross Price. the error "Condition for service price determination incomplete" occours when I press Enter key.
Conditions for service price determination incomplete
Message no. SE477
Diagnosis
Either the calculation schema for services does not exist or the condition types have not been defined correctly.
Procedure
Please check your Customizing settings for service conditions.
If you have not yet defined any conditions for services, you can adopt the standard SAP settings from client 0.
Please help me check this issue on the attached file.
Thank you very much.
Thanks,
Binh Tran
<Personal details shared by OP is removed by Moderator. >
Message was edited by: Jyoti Prakash

Hi All,
Thank you very much for your inputs.
I checked all the notes, 25357, 27024 and 1383066. Everything is ok in the system. and these notes explained more on the MM part not on the SD- BOS. However, still i am not able to complete the Inquiry, same error exists.
This error is in SD not in MM, while i am creating the inquiry BOS.
If any one come across it and solved it, please let me know.
Regards,
Suresh

Conditions for service price determination is incomplete.

Dear Gurus,
I am facing an error in Bill of services like "Conditions for service price determination is incomplete".In bill of services when am trying to enter the services in service entry sheet the system through the above errorr.S o can any one rspond immediately.
Thanks in advance
Rams

Hey
While creating Service PO
mainatain account assignment category
Maintain item category
Then enter the material description.
Automatically service tab will populate.
In this maintain service no ( the same can be created in AC03)
For the service maintain the conditions in ML33 or ML39 or ML45
Then create PO, The conditions will come automatically.
Regards,
Raman

Conditions for service price determination incomplete

Hi All,
While doing the VA11 through SD-BOS, I am getting the following.
Conditions for service price determination incomplete
Message no. SE477
Diagnosis
Either the calculation schema for services does not exist or the condition types have not been defined correctly.
Procedure
Please check your Customizing settings for service conditions.
If you have not yet defined any conditions for services, you can adopt the standard SAP settings from client 0.
Please let me know did you anyone got the same kind of error.
Thanks,
Suresh.

Hi All,
Thank you very much for your inputs.
I checked all the notes, 25357, 27024 and 1383066. Everything is ok in the system. and these notes explained more on the MM part not on the SD- BOS. However, still i am not able to complete the Inquiry, same error exists.
This error is in SD not in MM, while i am creating the inquiry BOS.
If any one come across it and solved it, please let me know.
Regards,
Suresh

Master detail form issue retrieving service price automatically

Hi,
I developed a master detail form in order to process service requests.
On details block I'm trying to retrieve automatically service price after I select service name from LOV.
For this purpose I created a application plsql process
declare
v_price service.price%type;
begin
select     price into v_price
from      service
where      service_no = 1;
htp.prn(v_price);
exception when others then htp.prn('An error occurred retrieving the PRICE');
end;
Which process I'm calling through javascript function in order to retrieve service price.
<script type="text/javascript">
function GetServicePrice(pThis)
var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
html_GetElement('f07_'+vRow).value = new htmldb_Get(null,html_GetElement('pFlowId').value,'APPLICATION_PROCESS=getPrice',0);
</script>
Instead of price it returns this value: "[object Object]".
Is it possible to work as I intended or it should other way around?
I appreciate your help/comments.
Application Express 4.2.1.00.08
Oracle Database 11g Express Edition Release 11.2.0.2.0
Regards,

Tonito99 wrote:
Hi Tom,
I applied these changes on page HTML Header, but now it's not returning nothing.
f07_ (price column) is empty.
<script type="text/javascript">
function GetServicePrice(pThis)
var ajaxRequest = new htmldb_Get(null, $v('pFlowId'), 'APPLICATION_PROCESS=getPrice', 0);
var ajaxReturn = ajaxRequest.get();
$s('f07_'+vRow, ajaxReturn);
</script>
Any other suggestion?
Regards,
Edited by: Tonito99 on Mar 8, 2013 3:32 PMIf you are on apex 4.2 why are you still using the legacy/undocumented methods?
You should use new javascript API apex.server.process
apex.server.process ( "getPrice", {
success: function( pData ) { $s('f07_'+vRow, pData);}
} );

MEREQ001 - Service price mandatory in PR

Hi,
I would like to customize the field ESLL-TBTWR (Service Price) as mandatory in Service Purchase Requisitions.
I'm new with ABAP, the code that I need is something like below
Data: L_PSTYP type MEREQ_T_EBAN-PSTYP,
L_TBTWR type ESLL-TBTWR.
IF L_PSTYP = '9' and L_TBTWR is initial.
MESSAGE e999(sy) WITH text-m02.
Could anyone give me sugestions?
Thanks in advance,
GUilherme

hI,
Please check to make the field mandatory using transaction variants for tcode ME51N ..
regards
pushpa

Link to External Service price

HI
In Network CN23, i am having service in External processing with planned price in the details.
I want to make a report with the price.
It is stored in ESLL table.
How to link this ESLL-TBTWR price field with Network, WBS ?
Alagesan

Hi
Go to the table AFVC and get the value of AFVC-PACKNO by passing the value of PRPS-PSPNR to the table field AFVC- PROJN.
Go to the table ESLH and get the value of ESLH- PACKNO by passing the value of AFVC-PACKNO to the table field ESLH-FPACKNO.
Pass the value of ESLH- PACKNO to the table field ESLL-PACKNO, ESLL-SRVPOS NOT = u2018 u2019 and get the list of services i.e. ESLL- SRVPOS, ESLL-MENGE and ESLL-MEINS, ESLL-BRTWR, ESLL-KTEXT1.

Report for Service price conditions in contracts esp. validity periods

Hi all
I need a report that will show validity periods against price conditions for services in a contract. Can't find anything through the menus, SAP Help, Google.
Is there something as standard or will I need to cobble something together? The report needs to display conditions and validity periods by service / contract.
Any ideas?
Regards
David

Hi
Thanks for those, I had already found and tried a couple of those transaction. For some reason, those transactions aren't returning any results. I can get results if I branch into the 'Conditon info' screen, but unfortunately in this case the actual service numbers aren't quoted.
Regards
David

Userexit or BADI to change service price when create PO reference from PR

Hi,
I need userexit or Badi to change the gross price ( ESLL-TBTWR ) when create PO reference from PR. Currently , when I do this it will recalculate the gross price based on the service master and ignoring whatever the price put in PR. Could anyone tell me userexit or Badi that would allow me to change the price when i create PO from PR via ME21N.
Thanks,
Gilbert

Hi Gilbert,
You can try using Function Exit EXIT_SAPLMLSP_030 of Enhancment SRVESLL.
This Function Exit has ESLL data as changing parameter.
But this Function Exit is called from a number of transaction. So do put in correct checks (like sy-tcode or sy-ucomm) before substituting any values. If proper checks are not put in then values may be substituted when this function exit is called from other transactions (like tcode "ML81N").
Hope this will help.
Regards,
Abhisek.

Service price please! Berlin Germany! or others.

Hey again, my iBook HDD is dead and i need a new HDD and RAM. I have a 1.2GHz/256MB/30GB (real low), now u know why i need a new HDD and RAM.
Ive tried every solutions to repair the HDD through the CD but it failed and got worse. I want to know the price for the repair of the iBook (change HDD to a 60GB and 512MB RAM atleast) Please send me a quote!
I live in Germany (Berlin) and if anyone knows the price for that sort of repair, or the estimate price, that would be very helpful. (in Euros or US convert to EURO)

try this place maybe:
http://www.card-services.de/
or Apple service provider search:
http://www.apple.com/de/buy/locator/

Trying to change service - price change for no change?

I have two phones. One has 5000 texts a month ($20) and the other has per text charges. Tried to change them both to 1000 texts ($10 each). So why does it say my bill will go up by $8.00 when I try to make the change? It doesn't matter when I tell it to change - now or a the end of the cycle. Why don't the numbers add up?

Good afternoon stevirt.
I know when trying to make simple changes becomes difficult and confusing, it can be frustrating. Based on the changes you're trying to make, the bill should not increase at all, which is where the additional $8.00 doesn't make sense, correct? Did you select the option to make this change On Demand, to Back date, or Future date? If On Demand, this may be why the extra $8.00 charge, as the changes will be prorated on your next bill only. Moving forward, you will only be charged $10.00 per line, per month. However, if you'd like, I will be happy to review your account and changes to verify this information. Please send me a Private Message, and I will follow up with you.
Thank you,

Contracts - Service master price update

Hi All,
There was requirement in which the contract service master prices were required to be changed.
To update new condition price in the condition records, we created a program to update these values using ML52.
Eg. Contract A - item 10- Service S - old price - 100 - Valid till yesterday
                                         new price - 200 valid from today
We have a few problems here
1) Contract A always show old price even though valid price for this service today is 200 for the service S.
Is there any standard program which will correct this contract and get the new price seen in the contract based on the valid date. I.e. the service prices in the contract should always reflect the valid condition record price from ML52.
2) While updating ML52 there were two kinds of records. One with Plant specific and others without plant. Now when I go to contract, select services and select a service line item and click on the new condition record which is valid today and come back. If the condition record is plant specific, the new price 200 is immidiately seen on the contract service master screen. But if the ML52 value was not plant specific, it always shows me 100. What could be the reason for this.
I have tried to give as much details as I can. Let me know incase any more information is required.
Regards,
Shahu

Hi,
Certain condition types can be changed via mass maintenance (transaction MEDL) in a contract, the conditions in all
selected documents are correctly changed. However, even if you display
one of those contracts, the values on item level are NOT updated at all!
This only happens when a MANUAL start of the price determination
occurs, it is NOT performed automatically!
Nevertheless, the user can be SURE that correct príces are found by the system whenever such a contract service is selected, no matter what is written in that contract
itself!
If prices are entered into a contract with different validity periods,
the system does not update them automatically, but one has to use the pulldown menu option
'prices -> find new' after having selected one item line and switched
to the service fullscreen. If you want to update the service
contract with latest price then you have to use the following:
Me32K->item services->service conditions here goto menu
service specipications -> prices-> find New. Then system updates the
price with the current validy date price. In already existing contracts you must carry out a new pricing manually.
Please test additionally the batch input process for price updation in contracts - transaction SHDB.
I can not answer your question regarding the update of non plant specific data. Sorry.
Regards,
Edit

APPLE customer service for ipod touch

sorry if this is a bit dragged out post, but i'll limit it to as short as possible.
bought my daughter an ipod touch for last christmas which has always been inside a hard case and never been outside and is like new when out of case(for cleaning).
last month or so it developed a small prob with sound not playing on some tracks(posted in here also), i sent it back to apple for repair, they sent it back saying it was software issue and they updated software accordingly, within days of recieving it back it started to develop another problem with the screen flickering on and off and the totally stopped responding to touch,called apple again to inform them of this and they asked for it back,sent it back again(only using their package service & UPS courier) i recieved it back a few days later with a very crude note stating they will not be repairing it because it has been subject to abuse/neglect in the form of liquid damage. no explaination as to what has been damaged or even cost of repair. i know for a fact 100% this has not been near water or any liquid, i have asked apple for an explaination and sent them 3 letters of complaint which they do not answer,i have now contacted consumer direct uk, they are advising small claims action.
anyone have similar problem or any advice they can offer? looking on consumeraffairs.com this seems to be a regular tactic of apple

If the water sensor has been triggered, Apple will refuse warranty service. You state that the iPod has never been exposed to moisture. I'm not saying that you would not tell the truth, but many people claim that a unit hasn't been abused only to find/admit later that it has, so your protestations will probably be in vain. Apple will point to the sensor being triggered as hard evidence that it has indeed come in contact with moisture. Heck, unless you've had the unit in your possession 24/7 since you got it, you can't even with certainty say that it hasn't; many children have, for instance, inadvertently and sometimes unknowingly had a spill in a backpack that damaged some electronic device.
As others have suggested, you can try taking the unit to an Apple Store and discussing the issue. You can also call the Apple tech support line and asking to speak with a customer service representative. But I would guess that neither route will be of any use; Apple sees the moisture sensor triggered and that ends the matter for them.
You can see your options for out-of-warranty service from Apple here:
http://www.apple.com/uk/support/ipod/service/faq/#warranty6
They have flat repair prices for iPods which you can see here:
http://www.apple.com/support/ipod/service/prices/#uk
Alternatively, you can pursue repair though third-party service providers. Whether or not those would be more cost-effective I can't say.
Message was edited by: Dave Sawyer

Discount in Services

Hi, we have a business requirements like follows
Vendor is providing Services to us , the price negociated with vendor is inclusive of MATERIAL and Services and payment will be made based on activity completion.For this we have created a service purchase order with single PO line and multiple services is prepared for this.
Like in PO line item 10 , we have entered following services
1) Milestone 1 - > 10% of the price
2) Milestone 2 -> 10% of the price
3) Milestone 3 -> 80% of the price
so that User can create SES of respective MILESTONE line after completion of work.
Till time things are OK ....
Now in order to accomplish those services vendor is procuring some material and our client wants to track the supply and payment seperately for material therefore another Material purchase order is prepared for that , so that at the time of material receipt , MIGO / MIRO can be done.
Now the problem is ... SES against Service PO and MIGO against material PO will create double vendor liablity and therefore we want to give MIGO value as a discount in each SERVICE Line ( say MILESTONE 1).
As per my understanding , if we give discount in Std purchase procedure , then system is dividing it propositionally in all SERVICE Lines , while we want to give entire discount in single service line.
Need your help to assign discounts in SERVICE LINES ( may be using MS0000 procedure , not sure )
Regards
Shrey

Thx KI ...
Price Change and discount at item level might not be helpful to me ... As I want to track them in future.
I have modified MS0000 ( Service price procedure ) by addition one discount condition ( ZR00) in that ...now I can supply any discount value ( Absolute) in that , which will reflect in PO line item conditions and Line net price.
But in case my Service qty is > 1 then system is deducting entire discount in first SES ....
Like Milestone 1 , Qty 10 EA , Gross price = 100 INR per EA , Discount Absolute = INR 60
Then system is calculating total Net price is , 10* 100 - 60 = 940
Now when I create SES for 1 EA , system is calculating value as INR 40.If I changing qty to 2 , SES value gets changed to 140 and so on.
Therefore system is giving entire discount in first SES of that service ... while I wanted to get that Absolute discount distributed among entire Qty ......and expected results are like
SES for 1 EA should be 94 INR , not 40 EA
Is it the std SAP functionality ?
Regards

Setting up Service Level in Advanced Pricing

Hi
I would like to know how to set up service items and service levels in OM and use QP to price service levels. Is there a white paper which provides examples.
Thanks
Karthik

By service items/service levels, I assume you refer to things like 1-yr extended warranty, 2-yr extended warranty etc. If so, the answer is No. You can setup independent standard service items for each service level, and then use the GET_CUSTOM_PRICE utility to price these. We have used these in a CTO environment, where they are included in the BOM for the ATO model, and we use a custom pricing engine to derive the service price as a fixed % of the system (configuration) price.

Service Price in pr

Similar Messages

Maybe you are looking for