Service resetoutbound and high traffic

Guys,
Need your experience here, ..
By default, service resetoutbound is enabled for all interfaces. The formal definition of resetoutbound is sends TCP resets for all outbound TCP sessions that attempt to transit the ASA and are denied by the ASA based on access lists or AAA settings. The ASA also sends resets for packets that are allowed by an access list or AAA, but do not belong to an existing connection and are denied by the stateful firewall.
Based on that definition, ASA will send back TCP reset to ip source which have traffic block by ACL or AAA (CMIIW). What happen if the source still try to reconnect (*after the source receive "TCP reset", it reset the connection, but by application it try to reconnect again)? Can it cause high traffic ?
*Based on experience i have found log in ASA which have a lot "connection re-attempt" like this :
2012-11-13 20:12:08          Local4.Info          xxx.xxx.93          %ASA-6-302013: Built inbound TCP connection 7411196 for outside:xxx145.201/38733 (xxx145.201/38733) to inside:xxx.xxx.1/2000 (xxx.xxx.1/2000)
2012-11-13 20:12:08          Local4.Info          xxx.xxx.93          %ASA-6-302014: Teardown TCP connection 7411196 for outside:xxx145.201/38733 to inside:xxx.xxx.1/2000 duration 0:00:00 bytes 196 FIN Timeout
2012-11-13 20:12:08          Local4.Info          xxx.xxx.93          %ASA-6-106015: Deny TCP (no connection) from xxx145.201/38733 to xxx.xxx.1/2000 flags ACK on interface outside
2012-11-13 20:12:08          Local4.Info          xxx.xxx.93          %ASA-6-302013: Built inbound TCP connection 7411198 for outside:xxx145.204/28317 (xxx145.204/28317) to inside:xxx.xxx.1/2000 (xxx.xxx.1/2000)
2012-11-13 20:12:08          Local4.Info          xxx.xxx.93          %ASA-6-302014: Teardown TCP connection 7411198 for outside:xxx145.204/28317 to inside:xxx.xxx.1/2000 duration 0:00:00 bytes 196 FIN Timeout
2012-11-13 20:12:08          Local4.Info          xxx.xxx.93          %ASA-6-106015: Deny TCP (no connection) from xxx145.204/28317 to xxx.xxx.1/2000 flags ACK on interface outside
2012-11-13 20:12:08          Local4.Info          xxx.xxx.93          %ASA-6-302013: Built inbound TCP connection 7411200 for outside:xxx145.202/28526 (xxx145.202/28526) to inside:xxx.xxx.1/2000 (xxx.xxx.1/2000)
2012-11-13 20:12:08          Local4.Info          xxx.xxx.93          %ASA-6-302014: Teardown TCP connection 7411200 for outside:xxx145.202/28526 to inside:xxx.xxx.1/2000 duration 0:00:00 bytes 196 FIN Timeout
2012-11-13 20:12:08          Local4.Info          xxx.xxx.93          %ASA-6-106015: Deny TCP (no connection) from xxx145.202/28526 to xxx.xxx.1/2000 flags ACK on interface outside
2012-11-13 20:12:09          Local4.Info          xxx.xxx.93          %ASA-6-302013: Built inbound TCP connection 7411202 for outside:xxx145.204/39240 (xxx145.204/39240) to inside:xxx.xxx.1/2000 (xxx.xxx.1/2000)
2012-11-13 20:12:09          Local4.Info          xxx.xxx.93          %ASA-6-302014: Teardown TCP connection 7411202 for outside:xxx145.204/39240 to inside:xxx.xxx.1/2000 duration 0:00:00 bytes 196 FIN Timeout
Regards

Hello Fara,
By default that is how the TCP protocol works, I mean after a TCP connection gets dropped they will try to inittiate it and connect but again if this connection is invalid (because of any of the Accelerated security path algorithm value) it will get dropped.
So you need to do captures in order to determine what is goin on and finally download them and analizing wireshark,
Regards

Similar Messages

High Traffic Call Try Your Again Later. Have solution?

Hi people
I saw n discussions about this theme but somebody found some solution definitive?
I see this problem with Callmanager 6x and 7x and I cannot solve this message on IP Phones.
Thanks
Peterson

Hi guys...
i also faced this issue today and going to apply this solution for see if fix it..
you can try this aslo...
http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a008091c1dc.shtml
Cisco 7900 series IP Phone users do not receive a dial tone from Cisco CallManager, and the High Traffic Try Again Later error messages appears on the phone display when they go off-hook. This document discusses how to troubleshoot this issue.
Problem
Cisco 7900 IP Phones do not receive a dial tone from Cisco CallManager and instead receive a reorder/busy tone when the phone goes off-hook. The High Traffic Try Again Later error message appears on the LCD display of the IP Phone.
Note: This issue occurs intermittently.
Solution
The High Traffic Try Again Later error message that appears on the IP Phones indicates this issue:
Whenever the LowPriorityQueueThrottlingFlag Cisco CallManager service parameter is set to TRUE and the Low Priority queue is over the limit specified by the LowPriorityQueueThrottlingMaxCount Cisco CallManager service parameter, the High Traffic Try Again Later error message appears on the LCD display of any IP Phone that is registered to this Cisco CallManager server and that attempts to go off-hook and make a new call. By default, this message appears on the phone if the Low Priority queue gets deeper than 20 signals.
Generally, the Cisco CallManager works fine as long as the Low Priority queue does not get higher than 100. Therefore, if you never see the Low Priority queue go higher than 75, you can configure the LowPriorityQueueThrottlingMaxCount = 100 Cisco CallManager service parameter in order to overcome this issue.
It is also recommended to check the CPU utilization and the disk space usage. If they are high, you need to clear the hard disk space and shrink the CDR/CAR database.
Warm Regard's
===========
Amit

How to make high traffic for a Web Service?

Hi there,
I have build a simple Web Service and I would like to test its delay under high traffic environment.
I have also built a client that consumes the Web Service. I want to run the client about 100 times simultaneously.
Is this possible? And if it is, then could you tell me a way on how to run them?
I have deployed the Web Service in the Sun Application Server 8.2.
Thanks in advance.

SSZ wrote:
Yes.But couldn't understand where to start.In that case use the magic wand.
Ask specific questions, Many of your posts have an underlying tone , that of you not having read any documentation of bothered to research anything yourself I havent got the time to tell you how if you havent got the time to tell me what you have read , what you grasp and what you do not grasp.

Only LiveCycle Data Services 2.6 and higher are supported.???

not sure if this is the right forum but I have flash builder with sdk 4.1 and I recently installed blazeDS turnkey and tried to set uo a new flex project with a J2EE server type.
However I get this message and am unsure what to do.
Only LiveCycle Data Services 2.6 and higher are supported.
Im trying to follow this tutorial
http://www.adobe.com/devnet/livecycle/articles/blazeds_gettingstarted.html

Can you please try using the blazeds from:
http://opensource.adobe.com/wiki/display/blazeds/download+blazeds+4
Few articles which might help you:
http://balajisridhar.wordpress.com/2009/06/06/flash-builder-4-makes-a-new-marriage-proposa l-between-flex-and-java/
http://sujitreddyg.wordpress.com/2009/06/01/building-flex-application-for-blazeds-remoting -service-using-flash-builder-4/
Hope this helps.
Thanks,
Balaji S

High traffic service

im using sun one 8 in a high traffic enviroment.
My questions are:
Does sun one 8 app server has the same or better performance than Son one 7 ?
I dont find a tuning guide for sun one 8, there is one for sun 7, is this guide for Sun one 8 also ?
Where can I find documentation for Sun One Application server tuning on high traffic enviroments.
Thank you for your help

Acutualy, Sun ONE Application Server 8 PE is a developper support.
You should not use it in the high traffic enviroment.
If you want this, you should use the AppServer7.1SE/EE or
you should wait a release of AppServer8 SE.
Thanks,
- Nocky

Extremely slow and high latency all day.

DSL is running extremely slow during peak hours from 12 afternoon to 12 midnight. Lower than 50% of rated speed and high latency
I have been frustrated with this DSL Service for months now. I am considering contacting BBB to file a complaint and I am tired of dealing with customer service giving me the run around. Internet is a monopoly in my area therefore verizon feels it doesn't have to do anything to keep its customers when they provide crappy service. I am on waitlist for another internet service provider and it is going to take almost a year because of how bad the internet options are in the area and demand for better options. I even had to pay over 100 dollars to get a truck roll come to my house to fix any issues within the house and the internet has not gotten better. Atleast I feel I should get a refund or something.
Here is my speedtest result just now. http://www.speedtest.net/my-result/2899553407
It has been even slower at other times. http://www.speedtest.net/my-result/2893509440
Modem is Westell 6100 or something.
Transceiver Statistics
Transceiver Revision:
7.2.3.0
Vendor ID Code:
4
Line Mode:
G.DMT Mode
Data Path:
Interleaved
Transceiver Information
Downstream Path
Upstream Path
DSL Speed (Kbits/Sec)
3360
864
Margin (dB)
15.5
13.0
Line Attenuation (dB)
21.5
13.0
Transmit Power (dBm)
7.6
11.9
Giganews line info
news.giganews.com
traceroute to {edited for privacy}, 30 hops max, 60 byte packets
1 gw1-g-vlan201.dca.giganews.com (216.196.98.4) 0 ms 0 ms 0 ms
2 ash-bb1-link.telia.net (213.248.70.241) 0 ms 0 ms 0 ms
3 TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 3 ms GigabitEthernet2-0-0.GW8.IAD8.ALTER.NET (63.65.76.189) 3 ms TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 3 ms
4 P1-8-0-0.LSANCA-LCR-21.verizon-gni.net (130.81.151.237) 72 ms 72 ms 72 ms
5 P9-3.LSANCA-LCR-01.verizon-gni.net (130.81.193.123) 75 ms P8-0.LSANCA-DSL-44.verizon-gni.net (130.81.35.133) 75 ms 76 ms
6 * * *
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * Max number of unresponsive hops reached (firewall or filter?)
news-europe.giganews.com
traceroute to {edited for privacy}, 30 hops max, 60 byte packets
1 vl201.gw1.ams.giganews.com (216.196.110.3) 0 ms 0 ms 0 ms
2 te7-8.ccr01.ams05.atlas.cogentco.com (149.11.104.17) 0 ms te7-7.ccr01.ams05.atlas.cogentco.com (149.11.104.9) 0 ms te7-8.ccr01.ams05.atlas.cogentco.com (149.11.104.17) 0 ms
3 te0-7-0-16.ccr21.ams03.atlas.cogentco.com (154.54.72.42) 0 ms 0 ms 0 ms
4 te0-3-0-0.ccr21.lon13.atlas.cogentco.com (130.117.48.141) 8 ms 8 ms te0-2-0-0.ccr21.lon13.atlas.cogentco.com (154.54.28.158) 8 ms
5 te0-7-0-4.ccr21.jfk02.atlas.cogentco.com (154.54.84.125) 90 ms te0-0-0-4.ccr21.jfk02.atlas.cogentco.com (154.54.84.129) 90 ms *
6 te0-3-0-6.ccr21.dca01.atlas.cogentco.com (154.54.41.5) 96 ms te0-0-0-2.ccr21.dca01.atlas.cogentco.com (154.54.25.238) 96 ms te0-2-0-7.ccr21.dca01.atlas.cogentco.com (154.54.41.1) 96 ms
7 be2042.ccr21.iad02.atlas.cogentco.com (154.54.26.126) 97 ms 97 ms 97 ms
8 uunet.iad01.atlas.cogentco.com (154.54.13.138) 99 ms verizon.iad01.atlas.cogentco.com (154.54.10.226) 105 ms 105 ms
9 P0-8-0-0.LSANCA-LCR-22.verizon-gni.net (130.81.29.127) 177 ms 178 ms P1-0-0-0.LSANCA-LCR-21.verizon-gni.net (130.81.199.39) 174 ms
10 P8-0.LSANCA-DSL-44.verizon-gni.net (130.81.35.133) 175 ms P9-3.LSANCA-LCR-02.verizon-gni.net (130.81.193.109) 187 ms 182 ms
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * Max number of unresponsive hops reached (firewall or filter?)
Here is what ICSI Netalyzer Results have stated.
Network Access Link Properties + –
Network performance (?): Latency: 580 ms, Loss: 15.5% –
The round-trip time (RTT) between your computer and our server is 580 ms, which is somewhat high. This may be due to a variety of factors, including distance between your computer and our server, a slow network link, or other network traffic.
We recorded a packet loss of 16%. This loss is very significant and will lead to serious performance problems. It could be due either to very high load on our servers due to a large number of visitors, or problems in your network. Of the packet loss, at least 14.0% of the packets appear to have been lost on the path from your computer to our servers.
TCP connection setup latency (?): 720ms –
The time it takes for your computer to set up a TCP connection with our server is 720 ms, which is quite high. This may be due to a variety of factors, including a significant distance between your computer and our server, a particularly slow or poor network link, or problems in your network.
Background measurement of network health (?): 3 transient outages, longest: 0.8 seconds –
During most of Netalyzr's execution, the client continuously measures the state of the network in the background, looking for short outages. During testing, the client observed 3 such outages. The longest outage lasted for 0.8 seconds. This suggests a general problem with the network where connectivity is intermittent. This loss might also cause some of Netalyzr's other tests to produce incorrect results.
Network bandwidth (?): Upload 700 Kbit/s, Download 2.3 Mbit/s +
Network buffer measurements (?): Uplink 5400 ms, Downlink 1200 ms –
We estimate your uplink as having 5400 ms of buffering. This is quite high, and you may experience substantial disruption to your network performance when performing interactive tasks such as web-surfing while simultaneously conducting large uploads. With such a buffer, real-time applications such as games or audio chat can work quite poorly when conducting large uploads at the same time.
We estimate your downlink as having 1200 ms of buffering. This is quite high, and you may experience substantial disruption to your network performance when performing interactive tasks such as web-surfing while simultaneously conducting large downloads. With such a buffer, real-time applications such as games or audio chat can work quite poorly when conducting large downloads at the same time.
HTTP Tests + –
Address-based HTTP proxy detection (?): OK +
Content-based HTTP proxy detection (?): OK +
HTTP proxy detection via malformed requests (?): OK +
Filetype-based filtering (?): OK +
HTTP caching behavior (?): OK +
JavaScript-based tests (?): OK +
DNS Tests + –
Restricted domain DNS lookup (?): OK +
Unrestricted domain DNS lookup (?): OK +
DNS resolver address (?): OK +
DNS resolver properties (?): Lookup latency 520 ms +
Direct probing of DNS resolvers (?): +
DNS glue policy (?): OK +
DNS resolver port randomization (?): OK +
DNS lookups of popular domains (?): OK +
DNS external proxy (?): OK +
DNS results wildcarding (?): Warning –
Your ISP's DNS server returns IP addresses even for domain names which should not resolve. Instead of an error, the DNS server returns an address of 199.101.28.20, which resolves to search.dnsassist.verizon.net. You can inspect the resulting HTML content here.
There are several possible explanations for this behavior. The most likely cause is that the ISP is attempting to profit from customer's typos by presenting advertisements in response to bad requests, but it could also be due to an error or misconfiguration in the DNS server.
The big problem with this behavior is that it can potentially break any network application which relies on DNS properly returning an error when a name does not exist.
The following lists your DNS server's behavior in more detail.
Please help. I am so frustrated I literally have fights with my family over internet problems. I am right now looking for other options and even starting to think about paying over 100 a month for dedicated line or T1 if they can service my area.

Not a single response from Verizon on this? And after you posted the tests & information they will need? I think I may have to make a service choice soon. Its bad enough Verizon can't post a simple email address for our support, they have removed Usenet access, removed access to our websites (I use HTML so their sitebuilder is useless)... Sheeshe...

High Traffic Try again Later-- IP Com

Hi All,
I have this error in my cucm v10 user agent: High Traffic Try again Later
I suppose the problem is related to the high memory usage for the tomcat service. It is possible?
When I run the rtmt I get this error message: Available virtual memory below configured threshold . Configured low threshold is 25 %
tomcat (1858 MB) uses most of the memory
When this problem occurs, I need to restart the tomcat service and its works normally per moment.
Any idea?
Thanks

Hi Marcelo,
Yes, it correct. I have a be6k deploy.

Any advice of high-traffic WS usage?

I read the Guide of WS in R17, and still I try to figure out the best approach.
We have a Web site that uses OD Integration services on back-end. Web users are not OD users - so the server uses a pre-configured user account to connect to OD WS.
Since all Web requests are processed by different threads, the sessions cannot be exactly shared, so I understand one needs to have some common connection, which is used synchronously.
And we use "stateful" session: some oprations like inserting many records, etc., as I understand are designed for stateful sessions.
Now, if we would have high traffic with hundreds of requests - and request may take a second or two to execute - that will definitely slow down every Web user.
What's others' experience? How would you design such site? Have a connection pool - but aren't we limited to one session per OD user? Run several requests from different threads - but isn't it not recommended? What are those "queued requests" (5 max) the Guide talks about?
Thank you for sharing ideas.

Hi
I had exactly the same problem with SmartSync! I had tried everything and the only way to solve this problem if you restore your phone AS A NEW iPHONE. If you do a simple restore that will not solve the problem, tried it! Above you can read my comment where I shared my experiencies! Here it is again:
Hi,
Yeah it is quite annoying! It did reminded me to the old windows times... But I guess it is the smartsync app that somehow chrashes the ios or something. I am not sure. But finally, nothing worked for me and nobody could help me. So finally I had to do a restore and restore it as a new iPhone. What of course delete every personal things from your phone but I just realized that in the age of iCloud it is not that a big problem I mean my contacts where synced with icloud without a problem and because of in my itunes i had all my preveious apps, it wasnt that hard either to put them back to my phone! So it is not an end of the world thing. Took maybe 1 hour to have my phone back. Oh yeah, and after doing this, the problem disappeared so it works great again! But might wanna go back to appstore and leave some nice ratings about this app because for me it seems causing the problem!
good luck! and dont use smartsync any more btw, i found an other app called Syncy what basically does the same as smartsnyc, only with out crashing your phone

JAX-WS Client throws NULL Pointer Exception in NW 7.1 SP3 and higher

All,
My JAX-WS client is throwing an exception when attempting to create a client to connect to the calculation service. The exception is coming out of the core JAX-WS classes that are part of NetWeaver. (see exception below)
Caused by: java.lang.NullPointerException
 at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.createDispatchContextExistingPort(SAPServiceDelegate.java:440)
 at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.createDispatchContext(SAPServiceDelegate.java:475)
 at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.createDispatch(SAPServiceDelegate.java:492)
 at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.createDispatch(SAPServiceDelegate.java:484)
 at javax.xml.ws.Service.createDispatch(Service.java:166)
I have done some research and it appears that as of NetWeaver 7.1 SP3 SAP stopped using the SUN JAX-WS runtime and implemented their own SAP JAX-WS runtime. I also took the time to decompile the jar file that contained the SAPServiceDelegate class which is throwing the null pointer exception. (see method from SAPServiceDelegate below)
 private ClientConfigurationContext createDispatchContextExistingPort(QName portName, JAXBContext jaxbContext)
 BindingData bindingData;
 InterfaceMapping interfaceMap;
 InterfaceData interfaceData;
 bindingData = clientServiceCtx.getServiceData().getBindingData(portName);
 if(bindingData == null)
 throw new WebServiceException((new StringBuilder()).append("Binding data '").append(portName.toString()).append("' is missing!").toString());
 QName bindingQName = new QName(bindingData.getBindingNamespace(), bindingData.getBindingName());
 interfaceMap = getInterfaceMapping(bindingQName, clientServiceCtx);
 interfaceData = getInterfaceData(interfaceMap.getPortType());
 ClientConfigurationContext result = DynamicServiceImpl.createClientConfiguration(bindingData, interfaceData, interfaceMap, null, jaxbContext, getClass().getClassLoader(), clientServiceCtx, new SOAPTransportBinding(), false, 1);
 return result;
 WebserviceClientException x;
 x;
 throw new WebServiceException(x);
The exception is being throw on the line where the interfaceMap.getPortType() is being passed into the getInterfaceData method. I checked the getInterfaceMapping method which returns the interfaceMap (line above the line throwing the exception). This method returns NULL if an interface cannot be found. (see getInterfaceMapping method below)
 public static InterfaceMapping getInterfaceMapping(QName bindingQName, ClientServiceContext context)
 InterfaceMapping interfaces[] = context.getMappingRules().getInterface();
 for(int i = 0; i < interfaces.length; i++)
 if(bindingQName.equals(interfaces.getBindingQName()))
 return interfaces;
 return null;
What appears to be happening is that the getInterfaceMapping method returns NULL then the next line in the createDispatchContextExistingPort method attempts to call the getPortType() method on a NULL and throws the Null Pointer Exception.
I have included the code we use to create a client below. It works fine on all the platforms we support with the exception of NetWeaver 7.1 SP3 and higher (I already checked SP5 as well)
 //Create URL for service WSDL
 URL serviceURL = new URL(null, wsEndpointWSDL);
 //create service qname
 QName serviceQName = new QName(targetNamespace, "WSService");
 //create port qname
 QName portQName = new QName(targetNamespace, "WSPortName");
 //create service
 Service service = Service.create(serviceURL, serviceQName);
 //create dispatch on port
 serviceDispatch = service.createDispatch(portQName, Source.class, Service.Mode.PAYLOAD);
What do I need to change in order to create a JAX-WS dispatch client on top of the SAP JAX-WS runtime?

Hi Guys,
I am getting the same error. Any resolution or updates on this.
Were you able to fix this error.
Thanks,
Yomesh

WSUS service failure and uninstall error 0x80070643

Hello
I recently had a drive fail in a RAID 1 array on a Windows Server 2008 Standard SP2 domain controller. The drive was replaced and the array successfully rebuilt the drive. Our domain comprises a Win2k8 DC (which WSUS is installed on), a W2k3 DC, a W2k8 Storage
Server and various W2k, Win XP, Vista and W7 clients.
WSUS3 SP2 is installed on this computer and had been working fine. After the drive was rebuilt WSUS stopped working. WSUS is organised as follows:
The drive is divided into 3 partitions. C: contains the program files, D: contains the WSUS database and update files. E: is a system recovery partition.
After the drive was rebuilt I had a problem connecting to the WSUS console. I am logged on using the domain administrator account. I restarted the server last night in the hope that it would solve this issue. After restarting, the problem persists. When
I start Windows Server Update Services from Administrative Tools the centre pane shows a large red X and 'Error: Connection Error'. The option to 'Reset Server Node' results in the same error. The error, available from 'Copy Error to Clipboard' is:
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.IO.IOException -- The handshake failed due to an unexpected packet format.
Source
System
Stack Trace:
 at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
 at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
 at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
 at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
 at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
 at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
 at System.Net.TlsStream.CallProcessAuthentication(Object state)
 at System.Threading.ExecutionContext.runTryCode(Object userData)
 at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
 at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
 at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
 at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
 at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
 at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
 at System.Net.ConnectStream.WriteHeaders(Boolean async)
** this exception was nested inside of the following exception **
System.Net.WebException -- The underlying connection was closed: An unexpected error occurred on a send.
Source
Microsoft.UpdateServices.Administration
Stack Trace:
 at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
 at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)
 at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)
 at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.GetUpdateServer(PersistedServerSettings settings)
 at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ConnectToServer()
 at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ConnectToServerAndPopulateNode(Boolean connectingServerToConsole)
 at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.OnExpandFromLoad(SyncStatus status)
The event logs show that the Update Services service started 7mins after the server was restarted. This is immediately followed by an event stating the Windows Update service had started. If fails soon after and is restared automatically twice to try to
recover from the failure. 12 hours after the restart the Update Services service is still not running. It is set to Automatic (Delayed Start). The service is set to logon as 'Network Service'. The service can be manually started, but 'Resert Server Node' again
results in the same error. After 4mins the service will stop. Event 7034 is logged:
Log Name: System
Source: Service Control Manager
Date: 31/08/2011 09:05:50
Event ID: 7034
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Phobos.htlincs.local
Description:
The Update Services service terminated unexpectedly. It has done this 4 time(s).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Service Control Manager" Guid="{555908D1-A6D7-4695-8E1E-26931D2012F4}" EventSourceName="Service Control Manager" />
 <EventID Qualifiers="49152">7034</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>0</Task>
 <Opcode>0</Opcode>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2011-08-31T08:05:50.000Z" />
 <EventRecordID>230471</EventRecordID>
 <Correlation />
 <Execution ProcessID="0" ThreadID="0" />
 <Channel>System</Channel>
 <Computer>Phobos.htlincs.local</Computer>
 <Security />
</System>
<EventData>
 <Data Name="param1">Update Services</Data>
 <Data Name="param2">4</Data>
</EventData>
</Event>
IIS and SQL are running fine as far as I am aware. I also have Sophos Enterprise Console installed which uses SQL to store it's data and that is working fine.
After a bit of searching around the 'net I thought the easiest solution would be to uninstall WSUS, leave the database and update files in place and then re-install. I ran the uninstallation procedure from the Server Manager, but because the service is not
running, and even after starting the service, uninstallation fails:
Windows Server Update Services: Removal failed
 Error: Attempt to un-install Windows Server Update Services failed with error code 0x80070643. Fatal error during installation
I saw a reference to the online article located here:
http://blogs.technet.com/b/sus/archive/2008/11/05/how-to-manually-remove-all-of-wsus.aspx but the article states it is out of date and I did not want to make a bad situation worse by following the instructions.
Can anyone help me with this, please. Ideally, I would like to be able to keep the updates as downloading them again will consume a substantial amount of our monthly allowance. However, if the best thing is to remove the entire installation, then I will
ahppily go with that, too.
Thanks.

I'm experiencing this issue, but haven't been able to resolve it with the steps in Lawrence's post (and, another thanks from me for another detailed post from Lawrence!)
It's a 2008 box which had a relatively new WSUS install that just stopped working - not sure why. Unable to figure out why it had stopped, I tried to Remove the WSUS role, but that failed with the error above.
During the manual uninstall steps above...
(1) Using Windows Installer Cleanup Utility only showed the Windows Internal Database, not WSUS. I removed
that.
(2) Removed %ProgramFiles%\Update
Services - other resources not present
Reinstall has now failed with this error:
Windows Server Update Services 3.0 SP2 could not install Windows Internal Database. For more information, see the Setup log "C:\Users\NAME~1.ADM\AppData\Local\Temp\WSUSSetup.log".
2012-10-23 20:57:53 Success MWUSSetup Detected that setup was launched through Server Manager
2012-10-23 20:57:54 Success MWUSSetup Validating pre-requisites...
2012-10-23 20:57:54 Error MWUSSetup Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.)
2012-10-23 20:57:54 Error MWUSSetup WSUS is outdated. But this will not block setup (Error 0x00000000: The operation completed successfully.)
2012-10-23 20:57:57 Success MWUSSetup Incompatible version of ReportViewer installed. Required ReportViewer version: 9.
2012-10-23 20:57:57 Success MWUSSetup Incompatible version of ReportViewer installed. Required ReportViewer version: 9.
2012-10-23 20:58:25 Success MWUSSetup Initializing installation details
2012-10-23 20:58:25 Success MWUSSetup Skipping Asp.Net install since not running on win2k3...
2012-10-23 20:58:25 Success MWUSSetup Installing wYukon using ocsetup
2012-10-23 20:58:25 Success MWUSSetup Installing Windows Internal database using ocsetup with command line as "ocsetup "WSSEE" /quiet /norestart"
2012-10-23 20:58:49 Error MWUSSetup The process ocsetup "WSSEE" /quiet /norestart returned error: 0x643 (Error 0x80070643: Fatal error during installation.)
2012-10-23 20:58:49 Error MWUSSetup ExecCmd failed (Error 0x80070643: Fatal error during installation.)
2012-10-23 20:58:49 Error MWUSSetup Install Windows Internal database: Failed to execute "ocsetup "WSSEE" /quiet /norestart" (Error 0x80070643: Fatal error during installation.)
2012-10-23 20:58:49 Error MWUSSetup CInstallDriver::PerformSetup: Installation of wYukon failed (Error 0x80070643: Fatal error during installation.)
2012-10-23 20:58:49 Error MWUSSetup CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.)
Would anyone on the thread have suggestions for what I might be able to do, to wipe the slate clean with the Internal
Database on this box?
The WID is not used for anything else, but there is other production software installed, (using SQL - not relevant, just
mentioning) and reinstalling the OS is not an option.

Poor battery life and high temperatures on MacBook Pro Retina 15"

I'm having never-ending problems with poor battery life and high temperatures on a MacBook Pro Retina 15"
I took it in for service and they told me it needed a new logic board and replaced it. When I asked why they were vague about the reasons, they said "it just needed one, it failed some test". I now have the computer back and it runs the same way it always did. I bought this laptop because it was supposedly capable of high end video editing in 1080P (or so Apple's website claims) and also photo editing.
"The processor, graphics, all-flash architecture, memory, and display in the 15-inch MacBook Pro give you unprecedented mobile video editing capabilities. Super-responsive flash storage delivers up to nine streams of 1080p ProRes (HQ) content for multicam editing in Final Cut Pro X,3 while the latest quad-core processors on the 15-inch MacBook Pro decode multiple streams of video, and a powerful GPU renders millions of pixels onto the screen. With flash storage that offers up to four times the performance of a traditional hard drive,1 you can even edit four streams of uncompressed 8-bit 1080p HD video, right from the internal storage on your 15-inch MacBook Pro with Retina display.4"
However, when I'm just browsing the web and emailing it runs quite warm and battery life is quite poor. Sometimes doing those same activities I would say it gets so warm it's almost uncomfortable to have on your lap and the fans are running fast enough to become noticably noisy. I'm also driving only one screen at and a time and I heard that the MacBook Pro can supposedly do three screens.
If actually try to do something like video editing with final cut pro the laptop gets really hot, the fans are on full blast and battery life drops to only an hour or two. I think when I rendered just a 3 or 4 minute clip once I got less than hour of battery life. I will have to time again.
Anyway most people (including the sales guys) are telling me no way this is not normal. When I play with demos in the store browsing the web they are not getting warm or hot to the touch. My friend's 2013 MacBook Air is also NOT getting warm to the touch doing the same activities.
I installed iStat Pro so I could check the temperature and fan speeds. I'm seeing temperatures of 70+ on the GPU, 85+ on the GPU diode and 65+ on the CPU heatsink along with elvated fan speeds above 5K which becomes noticeably noisy. I understand that might be normal for the most processor intensive tasks but it really doesn't seem right for just light web browsing and e-mailing. (I also may have viber and skype open but that shouldn't matter). CPU usage is usually running between 2-10% as this is all happening to.
Furthermore, straight from the specs:
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
I am assume "GPU" and "GPU diode" are temp measurements on the discrenete NVIDIA video card, especially since MacBook Airs from the same and newer generatio do not have this reading. Since Apple Claims the graphics "automatically switches" it seems all the harder to believe the GPU is reaching 85+ when in theory it shouldn't even be activated. I mean, shouldn't the INtel HD Graphics 4000 be capable of simple web browsing and e-mailing? Especially with only one screen activated (be it it the internal or an external)?
What should I do here? When I asked the repair guys "OK well what is the normal operating temp range for the various sensors" they said "Sorry Apple doesn't provide that info".

Yes I have.
Just web browsing and basically doing nothing I'm hear a lot of aduible fans, I'm getting 85C+ on GPU diode, 65+ on cpu heatsink. I since installed anohter program that shows me not just the CPU heatsink but the cores and the cores are at 90C+.
Seems like a lot of heat for doing nothing. Not only that but I have these problems with no external monitor while on battery power too.
I don't know what to do. They already replaced the logic board. Others seem to get advertised battery life out of Apple products and not have products that get **** near hot enough to burn you while just web browsing or watching a movie let alone advertised tasks like Photoshop and Final Cut Pro.

Ask the Expert: Overview of Cisco Prime Service Catalog and Process Orchestrator Solutions

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco Prime Service Catalog and Process Orchestrator solutions.
Cisco expert Jason Davis will discuss Cisco’s network management products offered under the Cisco Prime framework. If you have questions about Cisco Prime infrastructure or data center automation with our Cisco Prime Service Catalog and Process Orchestrator solutions, join us on the Cisco Support Community.
Jason Davis is a distinguished services engineer in the Intelligent Infrastructure Practice team of Cisco Advanced Services. His role is to provide strategic and tactical consulting for hundreds of Advanced Services customers, lead service innovation, and assess new services and technologies. Jason's primary expertise areas are in network management systems, intelligent automation, virtualization, data center operations, software-defined networking, and network programmability.
Based out of the Research Triangle Park (RTP) campus, Jason is also responsible for administering the Research Triangle Park Network Management Lab, Cisco's largest network management lab.
Since joining Cisco in 1998, Jason has been a frequent speaker at Cisco's Networkers and CiscoLive conferences in the United States and Europe. In the past five years he has also been involved in the conference network setup and monitoring. He is a much sought-after resource by the field sales teams to assist with presales solutions and executive briefings. He has provided strategic and tactical network management consulting for several hundred customers.
Jason is a subject matter expert with the following products and features:
Cisco Prime LAN management solution
Cisco Prime infrastructure
CiscoSecure ACS
Cisco Prime Network Registrar
Cisco Process Orchestrator
Cisco Prime Service Catalog
Cisco IP SLA
Embedded Event Manager
SNMPv3
onePK and OpenFlow
Cisco UCS
Device instrumentation
VMware ESX, ESXi, and vCenter
ITIL
Jason received his bachelor of science degree in electrical engineering from the University of Miami (FL). He has been married for 20 years and has 4 children. His interests include providing audiovisual technical support for churches and conference venues, camping and biking with his family, remote-control helicopter piloting, paintball, and recreational shooting.
Remember to use the rating system to let Jason know if you have received an adequate response.
Because of the volume expected during this event, Jason might not be able to answer every question. Remember that you can continue the conversation in Data Center > Intelligent Automation under the subcommunity Cisco Prime Service Catalog shortly after the event. This event lasts through September 12, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Jason,
Thank you very much for welcoming me to your expert discussion :) I feel to be in the right place, at the right time. Thank you also for answering question beyond your scope here, much appreciated. The information received will help me to go further as such I have submitted a 5 start rating for your first reply.
That sounds promising about the LMS part so yes, I stay tuned and wait patiently.
Ok, now let’s revert to the actual topic discussed here. Cisco Prime Service Catalog and Process Orchestrator solutions I have briefly read up on this on CCO (where elseJ) and picked out the following quote
---- Quote from the Cisco Prime Service Catalog Data Sheet
Today’s end users want self-service and easy access to IT tools and services.
Simultaneously, organizations are seeking ways to extend their cloud management
platforms beyond self-service delivery of virtual machines and infrastructure resources
while increasing their use of cloud-based solutions to enhance business agility and effectiveness.
Cisco Prime™ Service Catalog offers tremendous benefits to organizations that want to unify the ways in
which all types of IT services are ordered and fulfilled, not just infrastructure requests
---- un quote ---
I try to understand what (at high level of course) happens in the back ground when an order is raised and which vendor solution your product can interact with.
As mentioned in the quoted text, this service catalogue goes beyond the standard infrastructure.
Let’s say, a user wants to deploy a new email services, or in your example, extends or create a new web-portal (i.e. for HR to view and manage holiday, staff absence and benefits).
Your solution will need to interact somehow with the 3rd party vendor application that is capable building such portal I believe.
Without disclosing to many information, I assume the portal is linked to backend VM,s that spin up requested resources (and more magic of course). Perhaps I am mixing this up with another cisco product where a user can go on the portal and spin up virtual Firewalls, virtual Routers can be provisioned in now time.
Out if interest; Is this product also known as Mozart? (project code within Cisco?)
I hope query is ok.
Best wishes
Markus

External Web Service - User and password in HTTP header

Hi!
How is it possible to add user and password in the HTTP header in a external web service call?
I have created a "Portal Service from WSDL file - Client side" with the wizard in SAP Developer Studio. I following the Java Development Guide - Web Service Security, and use the secured service connection. I have also created a new System Landscape, but should the new system be based on HTTP, my own PAR or what?
How can I check that the user and password is added to the HTTP header or the SOAP envelope? Do I have to scan http traffic with a proxy as Paros or can I find the request sent from SAP EP in the logs?
Cheers
Asle

Hello All,
I have been struggling a bit while putting a reasonable security framework on a jax-rpc style web service. I'm using JWSDP1.2 to set up the webservice. I've tried to outline my problem below. Please correct me where I'm wrong.
I've been through the Sun's WS tutorials, but they are not really clear on security. However, from them I surmised that there are two decent authentication techniques. HTTP Basic and mutual authentication (MA) . Both have their drawbacks though. HTTP Basic suffers from poor encryption while MA is a bit difficult to set up on both client and server sides. Another problem with MA is that there is no central repository for users/passwords.
OK, what I would really like to do is use my own user database to verify users/passwords i.e. use a HTTP Basic like authentication (but at application level) but run it over SSL for encryption. It seems simple, but is it possible?
Also, I have noted that when I use HTTP Basic on the service side, and use a java client, then setting username/password has no effect. In other words, I can always access the web-service, even with wrong username/password.
Sorry for the long post. Hope someone can help. Thanks.

Service tax and cess on freight for inventorised items

Hi all,
There is a scenario where service tax and cess is charged on freight line items in a PO for inventorised material. This had been incorporated in pricing procedure accordingly. But while doing a MIGO it is found that the service tax and cess are charged on the materials. This should not be charged to the material rather at the time of MIRO it has to be posted to a receivable account.
Can anyone suggest what configuration is required for this.
thanks in advance
asbin

Hi Ponraj,
i would like to know the solution in detailed. As Per my client requirement, i have separated VAT amount and posting into separated G/L account. but my problem is i have to pay tax on freight amount to government. The taxes on the freight will be different. since 25% from the freight amount is taxable. so 25% from the freight amount i have to consider and on that i have to charge 2% E.Cess and 1% secondary higher E.cess.
how could i configure this issue in SAP?
please help me on this issue.
regards
Appu

Diff in IAS 9i Form Service Version and Developer 6i Rel 2. Version

Dear all,
I have noticed that Form Server version which comes with the Oracle 9i Application Server (Forms Service Module) is higher than then Oracle Developer 6i Tool Rel. 2 Form Complier version.
It Creates a problem, Form which is complied in Developer 6i Rel 2. gives blazzing result when it deployed it on Oracle 9i Form Server because of the version diff.
Oracle 9i Form Server Version is always higher than Forms Compiler comes with the latest Developer 6i Rel. 2.
Because of this reason we cannot install Developer 6i Rel. 2 and
Oracle 9i Application Server with Form Service on the same machine.
How to solve this.
Best Regards,
Darshan Desai

If you look in metalink, you can get patches for Forms 6i to patch it up to higher levels than rel 2. Any patch from 4 through to 9 will be newer. Choose which patch you want to bring yourself in line with 9iAS. The patch documentation tells you what version it will bring the forms up to.
Each patch superceeds the last so just pick one and apply it.
K

Service resetoutbound and high traffic

Similar Messages

Maybe you are looking for