Service setup propagation
Hi,
I have setup a fresh Snow Leopard install.
My FQDN is nemo.example.lan
Most things work very well but 1 problem is that services are propagated with this FQDN which obviously cannot be resolved externally. mail.example.lan can be resolved externally and this is how I used to connect under 10.5.
How can I either change the propagation domain name or should I look into a different kind of setup altogether? At this stage I don't want to host my own external DNS and my website isn't hosted locally.
Any suggestions ;o) ?
Thanks very much
Ben
Found a way around it.
When going to System Preferences, Accounts, Login Options,
Click on "Join"
Then click on Open Directory Utility, double click on LDAPv3
Then select you server IP or domain. This will prevent the "automatic" setup to propagate.
Next step, find out how to manually modify the propagation...
Cheers
Ben
Similar Messages
-
Hello,
I am fairly new at Xserve administration, but I got thrown in the fire and i need your help.
My system.log is being hammered with this error:
(com.apple.collabd[15483]): Service setup event to handle failure and will not launch until it fires.
I did my research and it seems to be related to Wiki, but I disabled wiki and restarted and it is still coming up. Any advice would really help
System Version: OS X 10.10.1 (build 14B25)
Server Version: Server 4.0.3 (Build 14S350)Try deleting the preferences file
-
WCF service setup with certificate authentication error
I have a WCF service setup and I need to use a certificate with it and are getting numerous errors when I attempt to browse it. The 1st error I get is "Security settings for this service require 'Anonymous' Authentication but it is not enabled for
the IIS application that hosts this service."
This sounds like a straightforward error message and setting the authentication method in IIS to anonymous resolves being able to browse the service. But I need to use a certificate and setting authentication to anonymous is obviously not right since we
only want those with the proper certificate to access the service. I have all authentication methods in IIS set to disabled when I get the above error message. I have the SSL settings in IIS for the service set to require a certificate as well. I am using
IIS 8.5 as well.
Here is my config file in hoping someone could point me in the correct direction. The service should only work over HTTPS since we are using a certificate and I need the meta data exposed as well hence the mexHttpBinding. I have searched the web but no solution
is working. Any help is appreciated.
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<configSections>
<sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="HEALookupProxy.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
</configSections>
<appSettings>
<add key="aspnet:UseTaskFriendlySynchronizationContext" value="true" />
</appSettings>
<system.web>
<compilation targetFramework="4.5.1" />
<httpRuntime targetFramework="4.5.1" />
<authentication mode="None"></authentication>
</system.web>
<system.serviceModel>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true">
<baseAddressPrefixFilters >
<add prefix="https"/>
</baseAddressPrefixFilters>
</serviceHostingEnvironment>
<services>
<service name="HEALookupProxy.HEALookupService" behaviorConfiguration="HEALookupServiceBehavior">
<endpoint address="" binding="wsHttpBinding" contract="HEALookupProxy.IHEALookupService" bindingConfiguration="HEALookupConfig" />
<endpoint contract="IMetadataExchange" binding="mexHttpBinding" address="mex" />
</service>
</services>
<bindings>
<wsHttpBinding>
<binding name="HEALookupConfig">
<security mode="TransportWithMessageCredential">
<transport clientCredentialType="Certificate"/>
</security>
</binding>
</wsHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="HEALookupServiceBehavior">
<serviceMetadata httpsGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="false" />
<serviceCredentials>
<serviceCertificate x509FindType="FindBySubjectName" storeLocation="LocalMachine" storeName="My" findValue="certnameremoved" />
</serviceCredentials>
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true" />
<!--
To browse web app root directory during debugging, set the value below to true.
Set to false before deployment to avoid disclosing web app folder information.
-->
<directoryBrowse enabled="false" />
<security>
<authorization>
<remove users="*" roles="" verbs="" />
<add accessType="Allow" users="user1, user2" />
</authorization>
</security>
</system.webServer>
</configuration>Hi spark29er,
>>The service should only work over HTTPS since we are using a certificate and I need the meta data exposed as well hence the mexHttpBinding.
For creating the HTTPS WCF service, first please change the mexHttpBinding to
mexHttpsBinding as following:
<endpoint contract="IMetadataExchange" binding="mexHttpsBinding" address="mex" />
For more information, please try to refer to:
#Seven simple steps to enable HTTPS on WCF WsHttp bindings:
http://www.codeproject.com/Articles/36705/simple-steps-to-enable-HTTPS-on-WCF-WsHttp-bindi .
Then please try to check the following article about how to do the certificate authentication on HTTPS WCF Service:
http://blogs.msdn.com/b/imayak/archive/2008/09/12/wcf-2-way-ssl-security-using-certificates.aspx .
Besides, setting the
includeExceptionDetailInFaults as false can give us more detailed error information.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano VillanuevaHi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva -
Pre-checks for cluster services setup
Hi Expert,
During the pre-checks for cluster services setup, I have got this error for Checking node connectivity.. How can I resolve this problem. The error is as follow as I enter "runcluvfy.sh stage -pre crsinst -n db-a,db-b" command. If the Check node connectivity fail, can I proceed to install the clusterware?
Checking node connectivity...
Node connectivity check passed for subnet "10.251.246.0" with node(s) db-b,db-a.
Node connectivity check passed for subnet "10.10.10.0" with node(s) db-b,db-a.
Node connectivity check passed for subnet "172.16.1.0" with node(s) db-b,db-a.
Node connectivity check passed for subnet "172.16.0.128" with node(s) db-b,db-a.
Node connectivity check passed for subnet "172.16.193.0" with node(s) db-b,db-a.
Suitable interfaces for the private interconnect on subnet "10.251.246.0":
db-b bge0:10.251.246.83 bge0:10.251.246.63
db-a bge0:10.251.246.82 bge0:10.251.246.61 bge0:10.251.246.99
Suitable interfaces for the private interconnect on subnet "10.251.246.0":
db-b ce0:10.251.246.64
db-a ce0:10.251.246.62
Suitable interfaces for the private interconnect on subnet "10.10.10.0":
db-b bge1:10.10.10.83
db-a bge1:10.10.10.82
Suitable interfaces for the private interconnect on subnet "172.16.1.0":
db-b ce3:172.16.1.2
db-a ce3:172.16.1.1
Suitable interfaces for the private interconnect on subnet "172.16.0.128":
db-b bge3:172.16.0.130
db-a bge3:172.16.0.129
Suitable interfaces for the private interconnect on subnet "172.16.193.0":
db-b clprivnet0:172.16.193.2
db-a clprivnet0:172.16.193.1
ERROR:
Could not find a suitable set of interfaces for VIPs.
Node connectivity check failed.
Thanks,
PegMost probably the virtual ip's are not virtual but connected to a physical device.
cu
Andreas -
Mobile Concierge Service Setup Guide
Hi All,
as with my previous is am starting this thread as a help in configuring the Mobile Concierge Service.
As the solution is new the documentation is a little light in detail so this is obviously a good place to document in more detail the setup and configuration.
What is neede for the Mobile Concierge Service:
Cisco Wireless LAN Controller:software version 7.2 or later
Cisco Prime Infrastructure: software version 1.3 or later
Cisco MSE (virtual or physical appliance): Cisco MSE software version 7.4 or later
Documents i have used:
Release Notes for Cisco Prime Infrastructure, Release 1.3.0.20
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.3/release/notes/cpi_rn_13.html
Cisco Prime Infrastructure Configuration Guide, Release 1.3
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/pi_13_cg.html
Cisco Location Analytics Service Configuraion Guide, Release 7.4.100.0
http://www.cisco.com/en/US/docs/wireless/mse/3350/7.4/Location_Analytics_Service/Guide/Cisco_Location_Analytics_Service_Configuration_Guide.html
Cisco Context-Aware Service Configuration Guide, Release 7.4
http://www.cisco.com/en/US/docs/wireless/mse/3350/7.4/CAS_Configuration/Guide/7_4_MSE_CAS.html
Connected Mobile Experiences Design and Implementation Guide Cisco Mobility Services Engine
http://www.cisco.com/en/US/prod/collateral/wireless/ps9733/ps9742/guide_c07-726506.html
As i attempt to get this service setup and configured i will post back here the details.
If anyone has any questions to get the ball rolling then pelase post here:
Mark Julier
@MarkJulierMobile Concierge - Venue Wizard
So the first thing that the Concierge service gets you to create is a venue. You do this by using the wizard.
Cisco's instructions are here:
http://www.cisco.com/en/US/docs/wireless/mse/3350/7.4/CAS_Configuration/Guide/7_4_MSE_CAS_chapter_0111.html#task_9F749496598541169607E266505012F4
Venue Name
So this will be the venue/location what you want this service to run at. For example if this is a Shopping Centre/Mall, Sports venue then you would give it the name of your Venue. e.g Dolphin Shopping Mall or BlackCats Stadium (made up names :-) )
As i am seting up this in our offices for testing i have given it the name of our company.
Floor outdoor/Association
Area Type - Next you choose area type either a floor area or outdoor. I have chosen floor area as i am looking to use this service internally.
Campus - Select that campus that you created in PI and want this service to work with.
Building - Select the building that you created in PI and you want this service to work with.
Floor - Select the Floor that you created in PI and you want this service to work with.
Coverage area - Select the Coverage area that you created in PI and you want this service to work with.
Selected Map - Once you have selected the coverage area above the map URL should be displayed here.
Click Next takes you to the next section.
Audio
Here you can select the audio that you wish touse for notifications and you can add up to three.
The manual does not explain what format these need to be in so PLEASE CAN SOMEONE ANSWER THIS PELASE
Am guessing that this is the audio that is played on the mobile device for a notification but this needs clarification.
Icons
Again the manaual does not explain the use of icons, PLEASE CAN SOMEONE EXPLAIN THE USE OF ICONS, WHAT FORMAT,SIZE ETC TO USE.
Am guessing that it is the icon that is displayed on the mobile device as part of MSAP (Mobile Services Advertismanet Protocol) but i am just guessing.
Venue APPs
Again the manual does not explain how this is actually implemented. I expect that this is how you specify through MSAP the APP's that are available at your location.
You enter the name of your app and i guess this is the actual name that appears on the mobile device.
You have the following options:
Web APP
Windows Phone OS
Android
BBOS
IOS
Symbian
WebOS
Windows Mobile
Desktop OS
Other
Am guessing that if you enter a URL in the first field (THAT HAS NO LABLE!!!) and select Web APP, that it will launch this URL in a browser on the mobile device.
Or if you have an APP that is installed on the mobile device you can launch it by specifing the APP name in a special format???
Again though i am just guessing so PLEASE CAN SOMEONE CLARIFY THIS PLEASE
Additonal Information
I think the next information is for Meriden who are Cisco's partner for mobile APP development.
Enter the location detail in the Location Detail text box. This provides details such as store address, zip code, or street address of the venue.
Enter the GPS latitude and longitude of the venue in the Latitude and Longitude text box. This helps the applications to identify the venue accurately.
Enter any other additional information that the venue would like to provide to the mobile application in the Additional Information text box.
Once you click save the information is applied in MSE.
So that is the first step in setting up the Mobile Concierge Service. What i would also like to know is that when you create a venue you ahve to specify a floor plan. So does this mean that if you have multiple floors that you have to create multiple venues? Or does it only work for one floor at the moment?
So over to the experts, can you ANSWER THE MAIN POINTS THAT ARE IN CAPITAL LETTERS ABOVE. I have put them in capital so that they stand out from all of the text.
Thanks
mark Julier
@markJulier -
Pre-check for cluster services setup was unsuccessful on all the nodes.
hi
when i am running the fixup script getting:
if i run cluvfy again i am getting another fixup script.what exactly to do?
[root@rac-1 grid1]# sh /tmp/CVU_11.2.0.1.0_grid1/runfixup.sh
Response file being used is :/tmp/CVU_11.2.0.1.0_grid1/fixup.response
Enable file being used is :/tmp/CVU_11.2.0.1.0_grid1/fixup.enable
Log file location: /tmp/CVU_11.2.0.1.0_grid1/orarun.log
uid=1100(grid1) gid=1000(oinstall) groups=1000(oinstall),1100(dba),1200(asmdba),1300(asmadmin),1202(asmoper)
grid1 hard nproc 16384
Value of MAX PROCESSES HARDLIMIT in response file is not greater than value in/etc/security/limits.conf. Hence not changing it.
grid1 hard nofile 65536
Value of FILE OPEN MAX HARDLIMIT in response file is not greater than value in /etc/security/limits.conf.Hence not changing it.
uid=1100(grid1) gid=1000(oinstall) groups=1000(oinstall),1100(dba),1200(asmdba),1300(asmadmin),1202(asmoper)
[root@rac-1 grid1]#
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "rac-1"
Destination Node Reachable?
rac-2 yes
rac-1 yes
Result: Node reachability check passed from node "rac-1"
Checking user equivalence...
Check: User equivalence for user "grid1"
Node Name Comment
rac-2 passed
rac-1 passed
Result: User equivalence check passed for user "grid1"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
rac-2 passed
rac-1 passed
Verification of the hosts config file successful
Interface information for node "rac-2"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
eth0 192.168.1.3 192.168.1.0 0.0.0.0 192.168.1.1 00:1D:72:39:3A:E4 1500
virbr0 192.168.122.1 192.168.122.0 0.0.0.0 192.168.1.1 00:00:00:00:00:00 1500
eth1 192.168.181.20 192.168.181.0 0.0.0.0 192.168.1.1 00:00:00:00:00:00 1500
Interface information for node "rac-1"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
eth0 192.168.1.2 192.168.1.0 0.0.0.0 192.168.1.1 00:00:E8:F7:02:B0 1500
eth1 192.168.181.10 192.168.181.0 0.0.0.0 192.168.1.1 00:26:18:59:EE:49 1500
virbr0 192.168.122.1 192.168.122.0 0.0.0.0 192.168.1.1 00:00:00:00:00:00 1500
Check: Node connectivity of subnet "192.168.1.0"
Source Destination Connected?
rac-2:eth0 rac-1:eth0 yes
Result: Node connectivity passed for subnet "192.168.1.0" with node(s) rac-2,rac-1
Check: TCP connectivity of subnet "192.168.1.0"
Source Destination Connected?
rac-1:192.168.1.2 rac-2:192.168.1.3 passed
Result: TCP connectivity check passed for subnet "192.168.1.0"
Check: Node connectivity of subnet "192.168.122.0"
Source Destination Connected?
rac-2:virbr0 rac-1:virbr0 yes
Result: Node connectivity passed for subnet "192.168.122.0" with node(s) rac-2,rac-1
Check: TCP connectivity of subnet "192.168.122.0"
Result: TCP connectivity check failed for subnet "192.168.122.0"
Check: Node connectivity of subnet "192.168.181.0"
Source Destination Connected?
rac-2:eth1 rac-1:eth1 yes
Result: Node connectivity passed for subnet "192.168.181.0" with node(s) rac-2,rac-1
Check: TCP connectivity of subnet "192.168.181.0"
Source Destination Connected?
rac-1:192.168.181.10 rac-2:192.168.181.20 passed
Result: TCP connectivity check passed for subnet "192.168.181.0"
Interfaces found on subnet "192.168.1.0" that are likely candidates for VIP are:
rac-2 eth0:192.168.1.3
rac-1 eth0:192.168.1.2
Interfaces found on subnet "192.168.122.0" that are likely candidates for a private interconnect are:
rac-2 virbr0:192.168.122.1
rac-1 virbr0:192.168.122.1
Interfaces found on subnet "192.168.181.0" that are likely candidates for a private interconnect are:
rac-2 eth1:192.168.181.20
rac-1 eth1:192.168.181.10
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
rac-2 1.96GB (2050416.0KB) 1.5GB (1572864.0KB) passed
rac-1 1.96GB (2058984.0KB) 1.5GB (1572864.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
rac-2 1.7GB (1780600.0KB) 50MB (51200.0KB) passed
rac-1 1.56GB (1636896.0KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
rac-2 4GB (4194296.0KB) 2.93GB (3075624.0KB) passed
rac-1 4GB (4192956.0KB) 2.95GB (3088476.0KB) passed
Result: Swap space check passed
Check: Free disk space for "rac-2:/tmp"
Path Node Name Mount point Available Required Comment
/tmp rac-2 / 24.03GB 1GB passed
Result: Free disk space check passed for "rac-2:/tmp"
Check: Free disk space for "rac-1:/tmp"
Path Node Name Mount point Available Required Comment
/tmp rac-1 / 16.54GB 1GB passed
Result: Free disk space check passed for "rac-1:/tmp"
Check: User existence for "grid1"
Node Name Status Comment
rac-2 exists passed
rac-1 exists passed
Result: User existence check passed for "grid1"
Check: Group existence for "oinstall"
Node Name Status Comment
rac-2 exists passed
rac-1 exists passed
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
rac-2 exists passed
rac-1 exists passed
Result: Group existence check passed for "dba"
Check: Membership of user "grid1" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
rac-2 yes yes yes yes passed
rac-1 yes yes yes yes passed
Result: Membership check for user "grid1" in group "oinstall" [as Primary] passed
Check: Membership of user "grid1" in group "dba"
Node Name User Exists Group Exists User in Group Comment
rac-2 yes yes no failed
rac-1 yes yes yes passed
Result: Membership check for user "grid1" in group "dba" failed
Check: Run level
Node Name run level Required Comment
rac-2 5 3,5 passed
rac-1 5 3,5 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Comment
rac-2 hard 65536 65536 passed
rac-1 hard 65536 65536 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Comment
rac-2 soft 1024 1024 passed
rac-1 soft 65536 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Comment
rac-2 hard 16384 16384 passed
rac-1 hard 16384 16384 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Comment
rac-2 soft 2047 2047 passed
rac-1 soft 16384 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Comment
rac-2 x86_64 x86_64 passed
rac-1 x86_64 x86_64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Comment
rac-2 2.6.18-92.el5 2.6.18 passed
rac-1 2.6.18-164.el5 2.6.18 passed
WARNING:
PRVF-7524 : Kernel version is not consistent across all the nodes.
Kernel version = "2.6.18-164.el5" found on nodes: rac-1.
Kernel version = "2.6.18-92.el5" found on nodes: rac-2.
Result: Kernel version check passed
Check: Kernel parameter for "semmsl"
Node Name Configured Required Comment
rac-2 250 250 passed
rac-1 250 250 passed
Result: Kernel parameter check passed for "semmsl"
Check: Kernel parameter for "semmns"
Node Name Configured Required Comment
rac-2 32000 32000 passed
rac-1 32000 32000 passed
Result: Kernel parameter check passed for "semmns"
Check: Kernel parameter for "semopm"
Node Name Configured Required Comment
rac-2 100 100 passed
rac-1 100 100 passed
Result: Kernel parameter check passed for "semopm"
Check: Kernel parameter for "semmni"
Node Name Configured Required Comment
rac-2 142 128 passed
rac-1 142 128 passed
Result: Kernel parameter check passed for "semmni"
Check: Kernel parameter for "shmmax"
Node Name Configured Required Comment
rac-2 1049812992 536870912 passed
rac-1 4398046511104 536870912 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Configured Required Comment
rac-2 4096 4096 passed
rac-1 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmall"
Node Name Configured Required Comment
rac-2 3279547 2097152 passed
rac-1 1073741824 2097152 passed
Result: Kernel parameter check passed for "shmall"
Check: Kernel parameter for "file-max"
Node Name Configured Required Comment
rac-2 6815744 6815744 passed
rac-1 6815744 6815744 passed
Result: Kernel parameter check passed for "file-max"
Check: Kernel parameter for "ip_local_port_range"
Node Name Configured Required Comment
rac-2 between 9000 & 65500 between 9000 & 65500 passed
rac-1 between 9000 & 65500 between 9000 & 65500 passed
Result: Kernel parameter check passed for "ip_local_port_range"
Check: Kernel parameter for "rmem_default"
Node Name Configured Required Comment
rac-2 262144 262144 passed
rac-1 4194304 262144 passed
Result: Kernel parameter check passed for "rmem_default"
Check: Kernel parameter for "rmem_max"
Node Name Configured Required Comment
rac-2 4194304 4194304 passed
rac-1 4194304 4194304 passed
Result: Kernel parameter check passed for "rmem_max"
Check: Kernel parameter for "wmem_default"
Node Name Configured Required Comment
rac-2 262144 262144 passed
rac-1 262144 262144 passed
Result: Kernel parameter check passed for "wmem_default"
Check: Kernel parameter for "wmem_max"
Node Name Configured Required Comment
rac-2 1048576 1048576 passed
rac-1 1048576 1048576 passed
Result: Kernel parameter check passed for "wmem_max"
Check: Kernel parameter for "aio-max-nr"
Node Name Configured Required Comment
rac-2 3145728 1048576 passed
rac-1 3145728 1048576 passed
Result: Kernel parameter check passed for "aio-max-nr"
Check: Package existence for "ocfs2-tools-1.2.7"
Node Name Available Required Comment
rac-2 ocfs2-tools-1.2.7-1.el5 ocfs2-tools-1.2.7 passed
rac-1 ocfs2-tools-1.4.2-1.el5 ocfs2-tools-1.2.7 passed
Result: Package existence check passed for "ocfs2-tools-1.2.7"
Check: Package existence for "make-3.81"
Node Name Available Required Comment
rac-2 make-3.81-3.el5 make-3.81 passed
rac-1 make-3.81-3.el5 make-3.81 passed
Result: Package existence check passed for "make-3.81"
Check: Package existence for "binutils-2.17.50.0.6"
Node Name Available Required Comment
rac-2 binutils-2.17.50.0.6-6.el5 binutils-2.17.50.0.6 passed
rac-1 binutils-2.17.50.0.6-12.el5 binutils-2.17.50.0.6 passed
Result: Package existence check passed for "binutils-2.17.50.0.6"
Check: Package existence for "gcc-4.1.2"
Node Name Available Required Comment
rac-2 gcc-4.1.2-42.el5 gcc-4.1.2 passed
rac-1 gcc-4.1.2-46.el5 gcc-4.1.2 passed
Result: Package existence check passed for "gcc-4.1.2"
Check: Package existence for "libaio-0.3.106 (i386)"
Node Name Available Required Comment
rac-2 libaio-0.3.106-3.2 (i386) libaio-0.3.106 (i386) passed
rac-1 libaio-0.3.106-3.2 (i386) libaio-0.3.106 (i386) passed
Result: Package existence check passed for "libaio-0.3.106 (i386)"
Check: Package existence for "libaio-0.3.106 (x86_64)"
Node Name Available Required Comment
rac-2 libaio-0.3.106-3.2 (x86_64) libaio-0.3.106 (x86_64) passed
rac-1 libaio-0.3.106-3.2 (x86_64) libaio-0.3.106 (x86_64) passed
Result: Package existence check passed for "libaio-0.3.106 (x86_64)"
Check: Package existence for "glibc-2.5-24 (i686)"
Node Name Available Required Comment
rac-2 glibc-2.5-24 (i686) glibc-2.5-24 (i686) passed
rac-1 glibc-2.5-42 (i686) glibc-2.5-24 (i686) passed
Result: Package existence check passed for "glibc-2.5-24 (i686)"
Check: Package existence for "glibc-2.5-24 (x86_64)"
Node Name Available Required Comment
rac-2 glibc-2.5-24 (x86_64) glibc-2.5-24 (x86_64) passed
rac-1 glibc-2.5-42 (x86_64) glibc-2.5-24 (x86_64) passed
Result: Package existence check passed for "glibc-2.5-24 (x86_64)"
Check: Package existence for "compat-libstdc++-33-3.2.3 (i386)"
Node Name Available Required Comment
rac-2 compat-libstdc++-33-3.2.3-61 (i386) compat-libstdc++-33-3.2.3 (i386) passed
rac-1 compat-libstdc++-33-3.2.3-61 (i386) compat-libstdc++-33-3.2.3 (i386) passed
Result: Package existence check passed for "compat-libstdc++-33-3.2.3 (i386)"
Check: Package existence for "compat-libstdc++-33-3.2.3 (x86_64)"
Node Name Available Required Comment
rac-2 compat-libstdc++-33-3.2.3-61 (x86_64) compat-libstdc++-33-3.2.3 (x86_64) passed
rac-1 compat-libstdc++-33-3.2.3-61 (x86_64) compat-libstdc++-33-3.2.3 (x86_64) passed
Result: Package existence check passed for "compat-libstdc++-33-3.2.3 (x86_64)"
Check: Package existence for "elfutils-libelf-0.125 (x86_64)"
Node Name Available Required Comment
rac-2 elfutils-libelf-0.125-3.el5 (x86_64) elfutils-libelf-0.125 (x86_64) passed
rac-1 elfutils-libelf-0.137-3.el5 (x86_64) elfutils-libelf-0.125 (x86_64) passed
Result: Package existence check passed for "elfutils-libelf-0.125 (x86_64)"
Check: Package existence for "elfutils-libelf-devel-0.125"
Node Name Available Required Comment
rac-2 elfutils-libelf-devel-0.125-3.el5 elfutils-libelf-devel-0.125 passed
rac-1 elfutils-libelf-devel-0.137-3.el5 elfutils-libelf-devel-0.125 passed
Result: Package existence check passed for "elfutils-libelf-devel-0.125"
Check: Package existence for "glibc-common-2.5"
Node Name Available Required Comment
rac-2 glibc-common-2.5-24 glibc-common-2.5 passed
rac-1 glibc-common-2.5-42 glibc-common-2.5 passed
Result: Package existence check passed for "glibc-common-2.5"
Check: Package existence for "glibc-devel-2.5 (i386)"
Node Name Available Required Comment
rac-2 glibc-devel-2.5-24 (i386) glibc-devel-2.5 (i386) passed
rac-1 glibc-devel-2.5-42 (i386) glibc-devel-2.5 (i386) passed
Result: Package existence check passed for "glibc-devel-2.5 (i386)"
Check: Package existence for "glibc-devel-2.5 (x86_64)"
Node Name Available Required Comment
rac-2 glibc-devel-2.5-24 (x86_64) glibc-devel-2.5 (x86_64) passed
rac-1 glibc-devel-2.5-42 (x86_64) glibc-devel-2.5 (x86_64) passed
Result: Package existence check passed for "glibc-devel-2.5 (x86_64)"
Check: Package existence for "glibc-headers-2.5"
Node Name Available Required Comment
rac-2 glibc-headers-2.5-24 glibc-headers-2.5 passed
rac-1 glibc-headers-2.5-42 glibc-headers-2.5 passed
Result: Package existence check passed for "glibc-headers-2.5"
Check: Package existence for "gcc-c++-4.1.2"
Node Name Available Required Comment
rac-2 gcc-c++-4.1.2-42.el5 gcc-c++-4.1.2 passed
rac-1 gcc-c++-4.1.2-46.el5 gcc-c++-4.1.2 passed
Result: Package existence check passed for "gcc-c++-4.1.2"
Check: Package existence for "libaio-devel-0.3.106 (i386)"
Node Name Available Required Comment
rac-2 libaio-devel-0.3.106-3.2 (i386) libaio-devel-0.3.106 (i386) passed
rac-1 libaio-devel-0.3.106-3.2 (i386) libaio-devel-0.3.106 (i386) passed
Result: Package existence check passed for "libaio-devel-0.3.106 (i386)"
Check: Package existence for "libaio-devel-0.3.106 (x86_64)"
Node Name Available Required Comment
rac-2 libaio-devel-0.3.106-3.2 (x86_64) libaio-devel-0.3.106 (x86_64) passed
rac-1 libaio-devel-0.3.106-3.2 (x86_64) libaio-devel-0.3.106 (x86_64) passed
Result: Package existence check passed for "libaio-devel-0.3.106 (x86_64)"
Check: Package existence for "libgcc-4.1.2 (i386)"
Node Name Available Required Comment
rac-2 libgcc-4.1.2-42.el5 (i386) libgcc-4.1.2 (i386) passed
rac-1 libgcc-4.1.2-46.el5 (i386) libgcc-4.1.2 (i386) passed
Result: Package existence check passed for "libgcc-4.1.2 (i386)"
Check: Package existence for "libgcc-4.1.2 (x86_64)"
Node Name Available Required Comment
rac-2 libgcc-4.1.2-42.el5 (x86_64) libgcc-4.1.2 (x86_64) passed
rac-1 libgcc-4.1.2-46.el5 (x86_64) libgcc-4.1.2 (x86_64) passed
Result: Package existence check passed for "libgcc-4.1.2 (x86_64)"
Check: Package existence for "libstdc++-4.1.2 (i386)"
Node Name Available Required Comment
rac-2 libstdc++-4.1.2-42.el5 (i386) libstdc++-4.1.2 (i386) passed
rac-1 libstdc++-4.1.2-46.el5 (i386) libstdc++-4.1.2 (i386) passed
Result: Package existence check passed for "libstdc++-4.1.2 (i386)"
Check: Package existence for "libstdc++-4.1.2 (x86_64)"
Node Name Available Required Comment
rac-2 libstdc++-4.1.2-42.el5 (x86_64) libstdc++-4.1.2 (x86_64) passed
rac-1 libstdc++-4.1.2-46.el5 (x86_64) libstdc++-4.1.2 (x86_64) passed
Result: Package existence check passed for "libstdc++-4.1.2 (x86_64)"
Check: Package existence for "libstdc++-devel-4.1.2 (x86_64)"
Node Name Available Required Comment
rac-2 libstdc++-devel-4.1.2-42.el5 (x86_64) libstdc++-devel-4.1.2 (x86_64) passed
rac-1 libstdc++-devel-4.1.2-46.el5 (x86_64) libstdc++-devel-4.1.2 (x86_64) passed
Result: Package existence check passed for "libstdc++-devel-4.1.2 (x86_64)"
Check: Package existence for "sysstat-7.0.2"
Node Name Available Required Comment
rac-2 sysstat-7.0.2-1.el5 sysstat-7.0.2In both node oracle user & group should be same but in your case looks different.
Once again check your user & group.
Babu -
Where do I find the Integration Services Setup Disk?
When I connect to my VM and select Insert Integration Services Setup Disk from the Action menu, nothing happens. Should this be on my my Windows Server 2008 R2 DVD that I used to set yp Hyper-V and my two VMs?
ThanksAgain, the Integration Services are ONLY for installation inside a virtual machine. You aren't gonig to see an option for them unless you're connected to a VM via the Hyper-V management console (the option is under the Action menu.)
Windows 7 includes the Hyper-V integration components, you may need to upgrade them depending on what service pack levels your Win7 and Hyper-V server are on.
However, the legacy adapter and integration components aren't dependent upon each other.
The legacy adapter would be added to your VM before you install an OS in your VM and IC are installed after you finish installing your OS. With Windows7 you don't need to use the legacy adapter since Windows 7 is a supported OS and Integration
components are available.
Also, are you trying to add the legacy adapter while the Windows 7 VM is running or in a saved state? If so, that is the reason it isn't available to install, the VM needs to be powered off. -
B2B API for setup propagation 11g??
Hi All,
How do we setup propagation in 11g B2B..
we used to use java oracle.tip.adapter.b2b.selfservice.TradingPartnerManager in 10g... is there any API available in 11g for same kind of funcationality?
Regards,
PraveenHi krishna,
Is PS1 released? If not, any tentative dates for it??
Regards,
Praveen -
Boot camp services setup failed - Boot camp 3.3 update
Running Windows 7 Ultimate on a 2008 iMac with boot camp 3.2. When running apple update to install boot camp 3.3, after a reboot I get the following message from the installer: Boot Camp Services Setup Failed.
Sorry, After I posted I found the answer. I also had a logmein display driver and once uninstalled boot camp 3.3 installed just fine.The BC Service is installed for any individual login (whether local or domain-based), which happens only the first time. The BC Driver Installer has no option to install the services for 'All Users'. This is expected behavior.
The two-finger click is a separate issue. Can you try
Resetting the System Management Controller (SMC) on your Mac - Apple Support
How to Reset NVRAM on your Mac - Apple Support -
I have the following on my local network.
Server DomainA -> Small Business server 2003/Exchange 2003
Server DomainB -> Windows 2008 R2/Exchange 2013
Clients Domain A -> Windows XP/Outlook 2003
Clients Domain B -> Windows 7/Outlook 2007/2010
Problem: I want clients from DomainA to log into Exchange on DomainB on the same local network.
I need to know how to setup the DNS on both domains and the certificates on the DomainB Exchange server
to accept the connection from the PC on domainA. All connections from clients on domainB to server on domainB
work correctly but when adding accounts to Outlook 2003/2007 on domainA clients I am getting certificate errors.
I have purchased certificates for mail.domainb.com and autodiscover.domainb.com but I dont know how to get
the clients on domainA to recognize those external URL's of the exchange server (with the certificates bound to them) from the internal network. Hence I get domain errors.
I am getting issues when a client on DomainA tries to add an Outlook mail profile to connect to the Exchange on DomainB
Any suggestions on how to set this up?
thanksDomain A & Domain B are two separate AD Forests?
Users in Domain A either need mailbox-enabled user accounts that are in DomainB or a linked mailbox in Domain B to utilise the Exchange Server in DomainB. In either case with the help of the autodiscover service user can use the services in ExchangeB.
If the client machines are member of domainA and you are trying to access ExchangeB you will then need to leverage a custom XML file for autodiscover and force the Outlook client to use this file.
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<Account>
<AccountType>email</AccountType>
<Action>redirectUrl</Action>
<RedirectUrl>https://autodiscover.domain.com/autodiscover/autodiscover.xml</RedirectUrl>
</Account>
</Response>
</Autodiscover>
Then you need to configure the client machine to query that XML file by adding the following registry key:
Refer to XML file
for Outlook 2007:
HKCU\Software\Microsoft\Office\12.0\Outlook\Autodiscover
for Outlook 2010:
HKCU\Software\Microsoft\Office\14.0\Outlook\Autodiscover
STRING_value <your_namespace> = path to XML file
you can find more information in the following link.
Controlling Outlook Autodiscover behavior
http://blogs.technet.com/b/kristinw/archive/2013/04/19/controlling-outlook-autodiscover-behavior.aspx
CK -
Dude!,
I have been searching and digging for days trying to understand this setup.
I purchased a mac mini with server software and trying to get mail services to work.
It should not be this hard! I have set up my dns for my local domain and doubled checked via terminal that my ip matches the name. I have mutiple doamins I would like to revcieve mail from on this server. All my users are the same on each domain. like, [email protected] and [email protected], ect.
In the general tab of mail services I set the following
domain name : mydomain.com
host name : mail.mydomain.com
in the advanced tab I checked include server daomain as local alias and added my other domain names like
myother.com
myother2.com
I then went to my mail client that I added the local email info,,
What should I use for the incoming mail?
Outgoing mail?
I have looked at mail services user guide, searched through tons of threads, googled everthing from smtp, dns, mail server setup, ect.
I am able however to manually set up a mail client and all works but that kinda defeats my reasoning of this server.
Is there a basic guide I can get that maybe clairifies the basic set issues?
I am sure I am not the only person having these issues?
ThanksIt should be this hard. It's actually quite simple once you take the time to ensure you have a fundamental understanding of numerous key concepts. Marketing for 10.6 server aside (a separate & interesting conversation), it's no more Apple's role to educate any would-be server administrator of these fundamentals than it is for Microsoft to do same with their product manuals, or for that matter Sun (Solaris) or RedHat...
http://www.google.com/search?&q=understanding+TCP/IP
Where/IF NAT is involved:
http://www.google.com/search?&q=understanding+NAT
http://www.google.com/search?&q=understanding+smtp
http://oreilly.com/catalog/9780596100575
http://www.zytrax.com/books/dns/
http://www.google.com/search?&q=postfix+mta
(for 10.6)
http://www.google.com/search?&q=dovecot+mda -
Filemaker SMTP mail service setup
I am using Filemaker server on Snow Leopard and need to setup a SMTP server. I need to use SMTP to send emails form the Filemaker server. Does anyone know how to set this up on Snow Leopard for Filemaker server 11. Really could use the help.....
You don't need one. Just point it at the SMTP server provided by your service provider -- unless you are doing mass mailings and you rservice provider prohibits that, in which case there's a good chance that they may also block an SMTP server on your local host.
You can enable the Apple-provided SMTP server (postfix) on your local machine (though keep in mind that your sevice provider might see this as evidence of spamming and block it), simply enough.
Edit the file /System/Library/LaunchDaemons/org.postfix.master.plist
The last line of the file is '</dict>'; add this before it:
<key>RunAtLoad</key> <true/> <key>KeepAlive</key> <true/>
... save the file and open Terminal. Type this:
sudo launchctl start org.postfix.master -
Virtual Lab: Exploring SQL Server 2012 Integration Services - Setup script fails
I am trying to work through a Lab, but cannot get past the Setup script stage.
The lab is "Exploring SQL Server 2012 Integration Services". I have tried this several times (with new lab instances) and the result is always the same.
I double click the Setup command ... Press 2 ... when the popup dialog appears I press Ok ... the progress bar completes and the messages in the text box seem to indicate everything has completed (last line says "Done"). I click Close as per the
instructions and then the script moves to the "Configure SQL Server" stage.
After a short delay a number of error messages appear: "Could not open a connection ... Login / timeout expired" etc - basically it can't find or can't connect to the server.
I expected these labs to work seamlessly :)
Anyone know what's going wrong here?
Thanks,
LarryI am moving it to SSIS.
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Automatic service setup with network accounts
Hi all,
I'm having terrible trouble getting automatic service (e.g. iCal, iChat, etc.) setup to work with network accounts, either with network home directories or local home directories, and I can't work out what I'm doing wrong.
When I log in as a local user and join the Network Account Server, all services get set up as expected, without problems. When I log in with a network account however, whether the account has a server-hosted home directory or a local home directory, services aren't automatically set up, I don't get the auto configuration wizard/dialogue, and attempting to join the network account server again fails. Surely there's a way for network accounts to have services automatically set up on initial login? Any ideas?Hi all,
I'm having terrible trouble getting automatic service (e.g. iCal, iChat, etc.) setup to work with network accounts, either with network home directories or local home directories, and I can't work out what I'm doing wrong.
When I log in as a local user and join the Network Account Server, all services get set up as expected, without problems. When I log in with a network account however, whether the account has a server-hosted home directory or a local home directory, services aren't automatically set up, I don't get the auto configuration wizard/dialogue, and attempting to join the network account server again fails. Surely there's a way for network accounts to have services automatically set up on initial login? Any ideas?
Maybe you are looking for
-
MacBook Pro 8, 2 Crashes Frequently
I've a MacBook Pro 8,2 Early 2011 (15", 2.3 GHz i7, 16GB RAM). Since last month, my system started to crash frequently, from once a day to few (3-4) times a day. The crashes happened at random times - as I'm replying emails with Mail, browsing with S
-
How to get the current data and time of SCOM server via SCOM SDK (API) calls?
Hi, I need to read the current date and time of SCOM server via SOM SDK. Is there a class in SDK that provides this info ? Thanks, satheesh
-
Difference between DB CPU and DB Time
Hi, What is the difference between DB CPU and DB TIME in AWR report? Br, Raj
-
Im trying to create new vrf in Nexus5548 but i got the below message switch(config)# vrf context salem % VRF creation from cli not allowed on this platform switch(config)# Here is the Version and inverntory for the switch Software BIOS: versio
-
Listview not grey when disabled.
Hi, this is the issue: When I have a messagebox opened I disable the other windows, but I don't want them greyed out. I managed to change the model for all controls in order to do that, but I couldn't to it with the list view (though I managed to to