Sesion timeout unexpectly with REST Identity Interface

Hi
I am using OpenSSO REST Identity Interface for authentication and authorization. The issue I have is unexpected session timeout. For example, I used REST URL to authenticate a user, then I used the returned token.id to check OpenSSO for authorization decision with specific resource. The OpenSSO returned everything right. However, after ABOUT 30 minutes, I got invalid Session with the authorization URL, even I used this authorization URL every 5 minutes before session expired.
Did I miss anything in configuration?
Thanks in Advance

Just a bit detail about the issue:
I used this URL to get the session cookie
http://sso-dev1.mycompany.com:8080/opensso/identity/authenticate?username=ahunter&password=password
then I used following url to check the policy
http://sso-dev1.mycompany.com:8080/opensso/identity/authorize?uri=http://sso-dev2.mycompany.com/sample/manager/snoop.aspx&action=POST&subjectid=AQIC5wM2LY4SfcyfjAbaV2vTvwOwmb3CaU1IDwg%2F0ygdudY%3D%40AAJTSQACMDE%3D%23
The return is good ....
However, no matter how I refreshed the browser with 2nd URL, the user "ahunter"'s Session "IDEAL TIME" in OpenSSO grows until reaching 30 minutes ....
Is this a bug of OpenSSO? or did I miss something?
Thanks
Jxxe
console continues growing

Similar Messages

HT1933 The app i want to report has been removed from the app store, but an app with an IDENTICAL interface has cropped up. I need customer services now please.

Ages ago, i bought a app called vdownloader+ which boasted a unlimited downloading fucntion, the app downloads off of youtube and saves the video to the app and makes it viewable offline with no internet connection, and can download off other compatible sites too. Now its disappeared off the app store, i have found out it cannot have unlimited downloads. Annoyed. Now, there is another app on the app store with a different logo, barely different may i add, and IDENITCAL interface. This person must of created both apps, and i'm not getting any responce off of either problem email addresses which where supplied with both apps. (I downloased the lite version of the new app called Video downloader lite -Vdownload. I need assistence filing a complaint and taking this extremly seriously as i got conned into buying an app.
Many thanks.
-Harryeast1

You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

ACS 5.3 Authorization problem with using Identity Groups in Access Policy Rule

Hello guys, I am found a problem which I can't solve regarding authorization with using Identity Groups in Access Policy rule.
ACS version: 5.3.0.40.6 (internal build B.839)
I have very simple RADIUS Authorization rule which authorize user on behalf of right Identity Group.
Requested Identity Group exist
Testing user is created in Internal Users and has assigned requested Identity Group
Radius Access Policy:
Authentication against Identity Store Sequence, where authorization server is external RSA SecurID device and additional attributes retrieval is configured from Internal Users.
Authorization is very simple – One Rule with only one Condition which is: Identity Group - in - Requested_Testing_Rule. Then Default rule is set to Deny.
When I will try login with my testing user then authentication against RSA SecurID is OK, but authorization will be denied by Default rule – It looks like my Rule with Identity Group is totally omitted.
I am managing several other ACS servers (version 5.3 but with older patches) where similar rules are working without problem.
What I am tested:
Remove testing user and create his account again.
Rename Identity Group
Use another Identity Group
Remove Access Policy rule and create it again
Use Compound Condition: System:Identity Group
Use Compound Condition: System:UserID instead of Identity Group in Rule (it is working without problem)
Do you have any idea where problem can be?

OK guys, it started working yesterday without any configuration change. Maybe it was some database inconsistence wich was solved by ACS itself.

An error occurred querying a data source - with REST services

Hi,
I have a SharePoint 2013 form library library with an info-path form. I need to get the logged in user's 'Display Name' on my form load automatically.
I used REST service to fetch the current user details. In the preview mode of the form, its showing the right name. But when I publish this form to library I am getting the following error.
REST Service --> http://site url/_api/SP.UserProfiles.PeopleManager/GetMyProperties
Please help me to resolve this issue.
Thanks in advance for your time and reply :)

Hi,
According to your post, my understanding is that an error occurred querying a data source with REST services.
It is defiantly permission issue with GetUserProfileByName service
and could be many reasons of this problem. You first try with UDCX file and make sure that UPS is running.
Here are some similar threads for your reference:
http://social.technet.microsoft.com/Forums/en-US/b8c668ea-7511-4657-a1a8-08fb4a6bd53d/info-path-an-error-occurred-querying-a-data-source?forum=sharepointcustomizationprevious
http://social.technet.microsoft.com/Forums/en-US/46866ac2-da09-4340-a86a-af72cbb2c8d7/info-path-an-error-occurred-querying-a-data-source-?forum=sharepointcustomization
http://blogs.msdn.com/b/russmax/archive/2012/08/17/want-to-call-sharepoint-2010-web-services-within-browser-based-infopath-2010-forms.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Getting error while uploading multiple files in sharepoint hosted app in 2013 with REST API

Hi All,
In one of my tasks, I was struck with one issue, that is "While uploading multiple files into custom list with REST API".
Iam trying to upload multiple files in library with REST calls for an APP development, my issue is if i wants to upload 4 image at once its storing only
3 image file and further giving "Conflict" error". Below is the attached screenshot of exact error.
Error within screenshot are : status Code : 409
status Text :conflict
For this operation i am uploading different files as an attachment to an list item, below is the code used for uploading multiple files.
my code is
function PerformUpload(listName, fileName, listItem, fileData)
var urlOfAttachment="";
// var itemId = listItem.get_id();
urlOfAttachment = appWebUrl + "/_api/web/lists/GetByTitle('" + listName + "')/items(" + listItem + ")/AttachmentFiles/add(FileName='" + fileName + "')"
// use the request executor (cross domain library) to perform the upload
var reqExecutor = new SP.RequestExecutor(appWebUrl);
reqExecutor.executeAsync({
url: urlOfAttachment,
method: "POST",
headers: {
"Accept": "application/json; odata=verbose",
"X-RequestDigest": digest
contentType: "application/json;odata=verbose",
binaryStringRequestBody: true,
body: fileData,
success: function (x, y, z) {
alert("Success!");
error: function (x, y, z) {
alert(z);

Hi,
THis is common issue if your file size exceeds
upload a document of size more than 1mb. worksss well for kb files.
https://social.technet.microsoft.com/Forums/office/en-US/b888ac78-eb4e-4653-b69d-1917c84cc777/getting-error-while-uploading-multiple-files-in-sharepoint-hosted-app-in-2013-with-rest-api?forum=sharepointdevelopment
or try the below method
https://social.technet.microsoft.com/Forums/office/en-US/40b0cb04-1fbb-4639-96f3-a95fe3bdbd78/upload-files-using-rest-api-in-sharepoint-2013?forum=sharepointdevelopment
Please remember to click 'Mark as Answer' on the answer if it helps you

How to fix "Modifying a column with the 'Identity' pattern is not supported"

When doing Code First Migrations my mobile service always errors in the seed method with: 'Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Methodology' for the CreatedAt column. All my
models inherit from EntityData.
// Sample model
using System;
using System.Collections.Generic;
using System.ComponentModel.DataAnnotations;
using Microsoft.WindowsAzure.Mobile.Service;
namespace sbp_ctService.Models
public class Methodology : EntityData
public Methodology()
this.Scenarioes = new List<Scenario>();
public string Id { get; set; }
[Required]
[StringLength(50)]
public string EntryMethod { get; set; }
[Required]
[StringLength(50)]
public string TestDirection { get; set; }
[Required]
[StringLength(50)]
public string PassCriteria { get; set; }
[Required]
[StringLength(50)]
public string Dependency { get; set; }
public bool ExtraInfo { get; set; }
public virtual ICollection<Scenario> Scenarioes { get; set; }
And in my Configuration.cs file during an update here's my seed method:
protected override void Seed(sbp_ctService.Models.sbp_ctContext context)
// This method will be called after migrating to the latest version.
context.Methodologies.AddOrUpdate(
m => m.Id,
new Methodology { Id = "Methodology1", EntryMethod = "P/F", PassCriteria = "P/F", Dependency = "None", ExtraInfo = false, TestDirection = "Round" },
new Methodology { Id = "Methodology2", EntryMethod = "P/F", PassCriteria = "Best", Dependency = "None", ExtraInfo = false, TestDirection = "Round" },
new Methodology { Id = "Methodology3", EntryMethod = "P/F", PassCriteria = "Best", Dependency = "None", ExtraInfo = false, TestDirection = "In/Out" },
new Methodology { Id = "Methodology4", EntryMethod = "P/F", PassCriteria = "Best", Dependency = "None", ExtraInfo = false, TestDirection = "Out" }
For some reason on an update the CreatedAt field is created and given a value of null. So of course on an insert/update it will error because CreatedAt is an Identity field.
I've tried to configure the modelBuilder in my context to tell it that CreatedAt is an identity field, but that still doesn't work.
modelBuilder.Entity<Methodology>()
.Property(m => m.CreatedAt)
.HasDatabaseGeneratedOption(DatabaseGeneratedOption.Identity);
So far the only way to fix this is by commenting out my Seed data, but it's not a fix. I've seen other solutions where you can force it to not serialize certain fields, but I don't know if those solutions apply.

So I think this occurs because you might have created the database (Code-first) with POCOs that didn't have the CreatedAt field in them. I think that's what I did and the easiest way to fix it for me was to delete my database and re-create it with my POCOs
inheriting from Entity Data from the very beginning. We were still in development so it worked out for us but I know some people might not be able to do that. Here's what my table looks like after it was created correctly:
USE [database_name]
GO
/****** Object: Table [sbp_ct].[Methodologies] Script Date: 2/24/2015 9:48:45 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [schema_name].[Methodologies] (
[Id] NVARCHAR (128) NOT NULL,
[EntryMethod] NVARCHAR (50) NOT NULL,
[TestDirection] NVARCHAR (50) NOT NULL,
[PassCriteria] NVARCHAR (50) NOT NULL,
[Dependency] NVARCHAR (50) NOT NULL,
[ExtraInfo] BIT NOT NULL,
[Version] ROWVERSION NOT NULL,
[CreatedAt] DATETIMEOFFSET (7) NULL,
[UpdatedAt] DATETIMEOFFSET (7) NULL,
[Deleted] BIT NOT NULL,
[Name] NVARCHAR (MAX) NULL
GO
CREATE CLUSTERED INDEX [IX_CreatedAt]
ON [schema_name].[Methodologies]([CreatedAt] ASC);
GO
ALTER TABLE [schema_name].[Methodologies]
ADD CONSTRAINT [PK_schema_name.Methodologies] PRIMARY KEY NONCLUSTERED ([Id] ASC);
Does yours look something like that?

Terms of payment in sd module along with the fico interface

Explain breifly abou the terms of payment in sd module along with the fico interface?

Hi,
See the the SAP documentation of Daylimit.
For terms of payment which depend on whether or not the baseline date is
after or before the 15th of the month, you can define a two-part payment
term under the same terms of payment key. The terms of payment key is
expanded by the day limit entered here. Thus there are two entries in
which different terms can be specified.
In your case,
if rbkp-bldat is between 1st and 5th of the month, extract
data related to t052-ztagg = '05'.
If rbkp-bldat is between 6th and 20th of the month, extract
data related to t052-ztagg = '20'.
if rbkp-bldat is between 21st and end of month, extract
data related to t052-ztagg = '31'
Regards
Vinod

Error in CodeFirst Seed with migrations : Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Category'.

Hi,
I have activated migrations on my Azure Mobile Services project. I filled the new seed function Inside the Configuration.cs class of the migrations. If the tables are empty, the seed function is going without any problems. When my AddorUpdate tries to update
the first object I get the error in the inner exception : "Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Category'."
Part of my code is as follows:
context.categories.AddOrUpdate(
new Category { Id="1", Code="GEN", Text="General"},
new Category { Id="2", Code="POL", Text="Politics"},
new Category { Id="3", Code="FAS", Text="Fashion"},
new Category { Id="4", Code="PEO", Text="People"},
new Category { Id="5", Code="TEC", Text="Technology"},
new Category { Id="6", Code="SPO", Text="Sport"},
new Category { Id="7", Code="LIV", Text="Living"}
Any help is welcomed. Thanks.
Faical SAID Highwave Creations

This occurred to me because I changed my POCO models to inherit from EntityData after I had already created my database without the extra Azure Mobile Service properties (UpdatedAt, CreatedAt, Deleted). The only way I fixed it was to drop the database and
start over with my classes inheriting from EntityData from the beginning. If you can't do that then I would create a new table with EntityData models and see how that database is created and manually update your tables to match those. Here's an image of one
of my tables from the management console on Azure. You can see that CreatedAt is an index.

"Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'.

I am using code fist migration and second time I run the service, I got this error.
"Modifying
a column with the 'Identity'pattern
is not supported. Column:
'CreatedAt'.
context.Cars.AddOrUpdate(c => c.Id,
new Car { Id = "60B0891B-C3CF-41A6-9BE0-BCCCE5949E6B", Image = "ic_highlander", Name = "Highlander", Description = "4 SEATER, FULL DAY (10 HRS), DOWNTOWN EXCLUDING INDUSTRIAL ZONE, WITH ENGLISH SPEAKING DRIVER", SeatingCapacity = 4, Luggage = 2, Rates = 20000.00M, AirportCode = "YGN" },
new Car { Id = "BAA205B5-C43F-490E-A83B-81F0EBDA2D97", Image = "ic_super_custom", Name = "Super Custom", Description = "4 SEATER, FULL DAY (10 HRS), DOWNTOWN EXCLUDING INDUSTRIAL ZONE, WITH ENGLISH SPEAKING DRIVER", SeatingCapacity = 4, Luggage = 2, Rates = 20000.00M, AirportCode = "YGN" },
new Car { Id = "DD68E56D-3967-4D32-A959-BEFBCB70FC4B", Image = "ic_mark_ii_grande", Name = "MarkII GRANDE", Description = "4 SEATER, FULL DAY (10 HRS), DOWNTOWN EXCLUDING INDUSTRIAL ZONE, WITH ENGLISH SPEAKING DRIVER", SeatingCapacity = 4, Luggage = 2, Rates = 20000.00M, AirportCode = "YGN" },
new Car { Id = "8EDDC308-FB63-469B-8A6A-B2360D61892D", Image = "ic_hiace_commuter_13", Name = "Hiace commuter", Description = "4 SEATER, FULL DAY (10 HRS), DOWNTOWN EXCLUDING INDUSTRIAL ZONE, WITH ENGLISH SPEAKING DRIVER", SeatingCapacity = 4, Luggage = 2, Rates = 20000.00M, AirportCode = "MDL" }

Hi,
Thanks for posting here.
We are looking into this and will update you with solution. Stay tuned for details
Girish Prajwl

I have an iMac and have been using Adobe reader successfully for sometime. Recently, however, whenever I go to sign a document on Adobe reader The document closes unexpectedly with an error statement. I have already uninstalled and reinstalled Adobe reade

I have an iMac and have been using Adobe reader successfully for sometime. Recently, however, whenever I go to sign a document on Adobe reader The document closes unexpectedly with an error statement. I have already uninstalled and reinstalled Adobe reader with no improvement. What do I do next?

Please post the full error message, plus OS and Reader versions.

How to read azure storage data using JAVA with REST API

Hi,
We have a cloud service in our lab. We have enabled diagnostics
in cloud services. So WADPerformanceCounterTable was created in storage account. Now , We want to read the WADPerformanceTable using
JAVA with REST API. Is there any way to collect these details. please give me any
sample code to connect azure storage using table service REST API.
Thanks & Regards
Rathidevi

Hi,
Please have a look at this article:
https://convective.wordpress.com/2010/08/18/examples-of-the-windows-azure-storage-services-rest-api/, it demonstrate how to use table service Rest API, it also give us the code, hope this helps. Of course, the
MSDN article could also help us coding.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

*Help* Spry Horizontal Menu Bar wont show and cant seem to center it with rest of content

Hey,
I am a newbie to Dreamweaver and was wondering if someone can
help me with the Spry Horizontal Menu Bar....
http://www.djdanmatthews.net
1) After moving mouse over diffrent areas of Spry menu bar
the text seems to disapear or not show up?
2) I can't seem to center content of Spry menu bar with rest
of website?
3) How do I ad a image (where also can I get it) to the Spry
menu bar so it looks more professional &3d?
Thanks so much,
Dan

*Bump

Problems with SOAP Adapter/Interface

Hi Experts,
we currently try and experiment with XI 3.0 Stack 09 and the SOAP adapter respectively.
We started with a simple interface (foo..., see wsdl attachment) that we want to provide by XI.
All configurations (SLD, Integration Repository, Integration Directory) should have been done accordingly as we suppose, similar to other szenarios we have already implemented.
When we send a SOAP request based on a generated wsdl to XI we get the exception at the bottom of this text, containing e.g.
com.sap.aii.messaging.srt.BubbleException: error during conversion [null "null"];
com.sap.aii.messaging.util.XMLScanException: Parsing an empty source. Root element expected!
For sending the SOAP message we used XMLSpy.
Did someone have similar problems or can give us an working WSDL example, or some hint?
Thanks in advance,
Klaus Lukas
foo.wsdl
<?xml version="1.0" encoding="ISO-8859-1"?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:p1="urn://poreceive.xi.pse.siemens.com" targetNamespace="urn://poreceive.xi.pse.siemens.com" name="foo_out_sync">
 <wsdl:types>
 <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn://poreceive.xi.pse.siemens.com" targetNamespace="urn://poreceive.xi.pse.siemens.com">
 <xsd:element name="foo" type="foo_DT"/>
 <xsd:complexType name="foo_DT">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 fe0bb241d2a011d9cd15e9729ee2f568
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:sequence>
 <xsd:element name="item" type="xsd:string">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 fe0bb240d2a011d9acede9729ee2f568
 </xsd:appinfo>
 </xsd:annotation>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:schema>
 </wsdl:types>
 <wsdl:message name="foo">
 <wsdl:part name="foo" element="p1:foo"/>
 </wsdl:message>
 <wsdl:portType name="foo_out_sync">
 <wsdl:operation name="foo_out_sync">
 <wsdl:input message="p1:foo"/>
 <wsdl:output message="p1:foo"/>
 </wsdl:operation>
 </wsdl:portType>
 <wsdl:binding name="foo_out_syncBinding" type="p1:foo_out_sync">
 <soap:binding xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
 <wsdl:operation name="foo_out_sync">
 <wsdl:input>
 <soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
 </wsdl:input>
 <wsdl:output>
 <soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
 </wsdl:output>
 </wsdl:operation>
 </wsdl:binding>
 <wsdl:service name="foo_out_syncService">
 <wsdl:port name="foo_out_syncPort" binding="p1:foo_out_syncBinding">
 <soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
 </wsdl:port>
 </wsdl:service>
</wsdl:definitions>
soap message incl. error
<?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>error during
conversion</faultstring>
<detail>
<s:SystemError
xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>XMLScanException</code>
<text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process
(XISOAPAdapterBean.java:697)
at
com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process
(ModuleLocalLocalObjectImpl3.java:103)
at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process
(ModuleProcessorBean.java:221)
at
com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process
(ModuleProcessorLocalLocalObjectImpl0.java:103)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost
(MessageServlet.java:543)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:385)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReques
t(HttpHandlerImpl.java:263)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:340)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:318)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebConta
iner(RequestAnalizer.java:821)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle
(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:147)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessio
nMessageListener.process(ApplicationSessionMessageListener.java:37)
at
com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner
.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:162)
Caused by: com.sap.aii.messaging.srt.BubbleException: error during
conversion [null "null"]; nested exception caused by:
com.sap.aii.messaging.util.XMLScanException: Parsing an empty source.
Root element expected!
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.onResponseToWS
(XMBWebServiceExtension.java:936)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.invokeOnResponse
(XMBWebServiceExtension.java:602)
at com.sap.aii.messaging.srt.ExtensionBubble.onMessage
(ExtensionBubble.java:58)
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process
(XISOAPAdapterBean.java:576)
... 20 more
Caused by: com.sap.aii.messaging.util.XMLScanException: Parsing an
empty source. Root element expected!
at com.sap.aii.messaging.util.StreamXMLScannerImpl.open
(StreamXMLScannerImpl.java:104)
at com.sap.aii.messaging.mo.DefaultItem.setData
(DefaultItem.java:294)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.makeItemFromPayload
(XMBWebServiceExtension.java:972)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.onResponseToWS
(XMBWebServiceExtension.java:879)
... 23 more
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>

Hi Klaus
In your wsdl file the soap address tag (given below)
<soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
is to be edited as
<soap:address location="http://xxxxxxxx:50000//XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out" />
because the soap address format should be like :
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
For more information :
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
Hope this will be helpful.
Regards
Suraj

Problems with Java AQ interface migrating 9i to 10g

Hi!
I've got problems with Java AQ Interface migrating from 9i DB, JDBC, AQ to 10g rel.2 DB, JDBC, AQ
First, i started to occasionally receive NullPointerException in Oracle JDBC 9.2.0.8
java.lang.NullPointerException
at oracle.jdbc.driver.OracleStatement.describe(OracleStatement.java:6439)
at oracle.jdbc.driver.OracleStatement.get_column_index(OracleStatement.java:6203)
at oracle.jdbc.driver.OracleResultSetImpl.findColumn(OracleResultSetImpl.java:1557)
at oracle.jdbc.driver.OracleResultSet.getString(OracleResultSet.java:1543)
at gpnic.messaging.LDAPMessenger.messageFromRS(Unknown Source)
We were using 9.2.0.8 JDBC and 9i and 10g databases.
We decided to go up for 10g r2 JDBC Drivers, and 10.2 AQ but started to get the following errors:
oracle.AQ.AQOracleSQLException: ORA-25216: invalid recipient, either NAME or ADDRESS must be specified
ORA-06512: на "SYS.DBMS_AQIN", line 454
ORA-06512: на line 1
 at oracle.AQ.AQOracleQueue.enqueue(AQOracleQueue.java:1267)
 at gpnic.comm.messaging.transport.AQTransportAdapter$AQDestanation.send(AQTransportAdapter.java:607)
 at gpnic.comm.messaging.transport.OutboundThread.run(OutboundThread.java:83)
I'm specifying address of an agent, but oracle says I am not.
I tried both native AQ and JMS interfaces, bot got the same error. I specify recipient the following way:
'consumer' var contains name of AQ agent and is not null
native AQ interface:
aqSess = AQDriverManager.createAQSession(db_conn);
AQQueue destQ = aqSess.getQueue(schema, queue);
dequeueOptionsOut = new AQDequeueOption();
dequeueOptionsOut.setWaitTime(AQDequeueOption.WAIT_NONE);
dequeueOptionsOut.setConsumerName(consumer);
dequeueOptionsOut.setDequeueMode(AQDequeueOption.DEQUEUE_REMOVE);
dequeueOptionsOut.setNavigationMode(AQDequeueOption.NAVIGATION_FIRST_MESSAGE);
AQMessageProperty mpOut = new AQMessageProperty();
Vector vRecpt = new Vector();
vRecpt.add(new AQAgent(consumer, null, 0));
mpOut.setRecipientList(vRecpt);
AQMessage aqMsg = null;
AQEnqueueOption eOpt = null;
//prepare message
aqMsg = destQ.createMessage();
CLOB chMsg = CLOB.createTemporary(db_conn, true, CLOB.DURATION_SESSION);
chMsg.open(CLOB.MODE_READWRITE);
chMsg.putString(1,msg);
//creating oracle type message
gpnic.db.SDSTypes.SdsMsgT oraMsg = new gpnic.db.SDSTypes.SdsMsgT(chMsg);
AQObjectPayload payload = aqMsg.getObjectPayload();
payload.setPayloadData(oraMsg);
//setting properties
aqMsg.setMessageProperty(mpOut);
//do enqueueOut
eOpt = new AQEnqueueOption();
destQ.enqueue(eOpt, aqMsg); //<- here AQOracleSQLException is thrown
JMS interface to Oracle AQ:
TopicSession session;
TopicConnection connection;
TopicPublisher publisher;
AQjmsAgent[] recipientList;
connection = AQjmsTopicConnectionFactory.createTopicConnection(db_conn);
 session = connection.createTopicSession(true, Session.CLIENT_ACKNOWLEDGE);
 connection.start();
 Topic topic = ((AQjmsSession) session).getTopic(schema, queue);
 publisher = session.createPublisher(topic);
 recipientList = new AQjmsAgent[1];
 recipientList[0] = new AQjmsAgent(consumer, null);
CLOB chMsg = CLOB.createTemporary(db_conn, true, CLOB.DURATION_SESSION);
chMsg.open(CLOB.MODE_READWRITE);
chMsg.putString(1,msg);
//creating oracle type message
gpnic.db.SDSTypes.SdsMsgT oraMsg = new gpnic.db.SDSTypes.SdsMsgT(chMsg);
AdtMessage adtMessage = ((AQjmsSession)session).createAdtMessage();
adtMessage.setAdtPayload(oraMsg);
((AQjmsTopicPublisher) publisher).publish(adtMessage, recipientList); <- here Exception is thrown
We tried the following combinations
9i DB, 9i jdbc, 9i aq - enqueue ok
10g DB, 9i jdbc, 9i aq - enqueue ok
10g DB, 10g jdbc, 10g aq - exception is thrown
Can anyone help?

Duplicate post, please check Upgrade 9i to 10g

The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255

Hello All
We have a server 2008 R2 HyperV server and during the last few months it started to reboot randomly.
Initially we thought its related to the issue fixed by the following hotfix so we applied it but even with the hotfix it still keeps rebooting.
http://support.microsoft.com/kb/2732595
Unlike what's mentioned in the hotfix , the faulting module is not "ntdll.dll" but "msvcrt.dll".Also came up with the following indication the reboots could be related to KB2871997 but that update is not installed
on this system.
Following are the events from system log.
Log Name: System
Source: LsaSrv
Date: 2/9/2015 11:58:12 PM
Event ID: 5000
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HV2008-Host
Description:
The security package Kerberos generated an exception. The exception information is the data.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="LsaSrv" Guid="{199FE037-2B82-40A9-82AC-E1D46C792B99}" />
 <EventID>5000</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>0</Task>
 <Opcode>0</Opcode>
 <Keywords>0x8000000000000000</Keywords>
 <TimeCreated SystemTime="2015-02-10T04:58:12.415529200Z" />
 <EventRecordID>8091130</EventRecordID>
 <Correlation />
 <Execution ProcessID="736" ThreadID="5888" />
 <Channel>System</Channel>
 <Computer>HV2008-Host</Computer>
 <Security UserID="S-1-5-18" />
</System>
<EventData>
 <Data Name="Package">Kerberos</Data>
 <Binary>050000C00000000000000000000000001111F6FEFE070000020000000000000000000000000000008EEB1802000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
Log Name: System
Source: USER32
Date: 2/9/2015 11:58:24 PM
Event ID: 1074
Task Category: None
Level: Information
Keywords: Classic
User: SYSTEM
Computer: HV2008-Host
Description:
The process wininit.exe has initiated the restart of computer HV2008-HOST on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="USER32" />
 <EventID Qualifiers="32768">1074</EventID>
 <Level>4</Level>
 <Task>0</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2015-02-10T04:58:24.000000000Z" />
 <EventRecordID>8091132</EventRecordID>
 <Channel>System</Channel>
 <Computer>HV2008-Host</Computer>
 <Security UserID="S-1-5-18" />
</System>
<EventData>
 <Data>wininit.exe</Data>
 <Data>HV2008-HOST</Data>
 <Data>No title for this reason could be found</Data>
 <Data>0x50006</Data>
 <Data>restart</Data>
 <Data>The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.</Data>
 <Data>
 </Data>
 <Binary>06000500000000000000000000000000000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
Following are the events from Application logs.
Log Name: Application
Source: Application Error
Date: 2/9/2015 11:58:14 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: HV2008-Host
Description:
Faulting application name: lsass.exe, version: 6.1.7601.22653, time stamp: 0x534893ed
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0xc0000005
Fault offset: 0x0000000000001111
Faulting process id: 0x2e0
Faulting application start time: 0x01d03c91dbe5854f
Faulting application path: C:\Windows\system32\lsass.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: 6af0ff3d-b0e1-11e4-83ca-0026b9340d61
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Application Error" />
 <EventID Qualifiers="0">1000</EventID>
 <Level>2</Level>
 <Task>100</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2015-02-10T04:58:14.000000000Z" />
 <EventRecordID>267648</EventRecordID>
 <Channel>Application</Channel>
 <Computer>HV2008-Host</Computer>
 <Security />
</System>
<EventData>
 <Data>lsass.exe</Data>
 <Data>6.1.7601.22653</Data>
 <Data>534893ed</Data>
 <Data>msvcrt.dll</Data>
 <Data>7.0.7601.17744</Data>
 <Data>4eeb033f</Data>
 <Data>c0000005</Data>
 <Data>0000000000001111</Data>
 <Data>2e0</Data>
 <Data>01d03c91dbe5854f</Data>
 <Data>C:\Windows\system32\lsass.exe</Data>
 <Data>C:\Windows\system32\msvcrt.dll</Data>
 <Data>6af0ff3d-b0e1-11e4-83ca-0026b9340d61</Data>
</EventData>
</Event>
Log Name: Application
Source: Windows Error Reporting
Date: 2/9/2015 11:58:23 PM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: HV2008-Host
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: lsass.exe
P2: 6.1.7601.22653
P3: 534893ed
P4: msvcrt.dll
P5: 7.0.7601.17744
P6: 4eeb033f
P7: c0000005
P8: 0000000000001111
P9:
P10:
Attached files:
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871
Analysis symbol:
Rechecking for solution: 0
Report Id: 6af0ff3d-b0e1-11e4-83ca-0026b9340d61
Report Status: 0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Windows Error Reporting" />
 <EventID Qualifiers="0">1001</EventID>
 <Level>4</Level>
 <Task>0</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2015-02-10T04:58:23.000000000Z" />
 <EventRecordID>267650</EventRecordID>
 <Channel>Application</Channel>
 <Computer>HV2008-Host</Computer>
 <Security />
</System>
<EventData>
 <Data>
 </Data>
 <Data>0</Data>
 <Data>APPCRASH</Data>
 <Data>Not available</Data>
 <Data>0</Data>
 <Data>lsass.exe</Data>
 <Data>6.1.7601.22653</Data>
 <Data>534893ed</Data>
 <Data>msvcrt.dll</Data>
 <Data>7.0.7601.17744</Data>
 <Data>4eeb033f</Data>
 <Data>c0000005</Data>
 <Data>0000000000001111</Data>
 <Data>
 </Data>
 <Data>
 </Data>
 <Data>
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp</Data>
 <Data>C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871</Data>
 <Data>
 </Data>
 <Data>0</Data>
 <Data>6af0ff3d-b0e1-11e4-83ca-0026b9340d61</Data>
 <Data>0</Data>
</EventData>
</Event>
Log Name: Application
Source: Windows Error Reporting
Date: 2/9/2015 11:58:22 PM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: HV2008-Host
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: lsass.exe
P2: 6.1.7601.22653
P3: 534893ed
P4: msvcrt.dll
P5: 7.0.7601.17744
P6: 4eeb033f
P7: c0000005
P8: 0000000000001111
P9:
P10:
Attached files:
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871
Analysis symbol:
Rechecking for solution: 0
Report Id: 6af0ff3d-b0e1-11e4-83ca-0026b9340d61
Report Status: 4
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Windows Error Reporting" />
 <EventID Qualifiers="0">1001</EventID>
 <Level>4</Level>
 <Task>0</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2015-02-10T04:58:22.000000000Z" />
 <EventRecordID>267649</EventRecordID>
 <Channel>Application</Channel>
 <Computer>HV2008-Host</Computer>
 <Security />
</System>
<EventData>
 <Data>
 </Data>
 <Data>0</Data>
 <Data>APPCRASH</Data>
 <Data>Not available</Data>
 <Data>0</Data>
 <Data>lsass.exe</Data>
 <Data>6.1.7601.22653</Data>
 <Data>534893ed</Data>
 <Data>msvcrt.dll</Data>
 <Data>7.0.7601.17744</Data>
 <Data>4eeb033f</Data>
 <Data>c0000005</Data>
 <Data>0000000000001111</Data>
 <Data>
 </Data>
 <Data>
 </Data>
 <Data>
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp</Data>
 <Data>C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871</Data>
 <Data>
 </Data>
 <Data>0</Data>
 <Data>6af0ff3d-b0e1-11e4-83ca-0026b9340d61</Data>
 <Data>4</Data>
</EventData>
</Event>
Would really appreciate if someone can point us to the correct direction on how to get this issue sorted.
Regards,
Dhanushka

Hi Sir,
Please try the following items:
1. if ther is anti-virus installed , please uninstall it temporarily
2. run " sfc /scannow "
3. keep windows up-to-date
4. if you updated some hardware driver please roll it back
5. if the issue persists , please use windows installation media to perform inplace-upgrade for the system
Also please refer to reinstall C++ runtime within the similar thread:
https://social.technet.microsoft.com/Forums/windows/en-US/bf69eeff-24c4-499f-b280-b6a3098f4f9f/problem-with-msvcrtdll-version-70760117744?forum=w7itprogeneral
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Sesion timeout unexpectly with REST Identity Interface

Similar Messages

Maybe you are looking for