Session cookie not setting for secure domain in Chrome

I've been fighting with a login issue for the past few hours thinking it was my fault. I'm tired, so my IQ is cut in half right now. Makes for a very plausible scenario. However, I finally tried it in Firefox without issue.
It's just a simple login form, where the action is supposed to log me into both the secure and insecure domains. Here's the action:
action="{module_secureurl}/ZoneProcess.aspx?ZoneID=51&Referrer={module_siteurl,true,true}&OID={module_oid}&OTYPE={module_otype}"
That looks right to me. I also checked on my own site's login and had the same issue. I had just never noticed before because I don't use my secure domain.
Looks like either a bug in BC, or a bug in Chrome. Either way, I think it's worth having BC look into.

Similar Messages

Session's not setting

Hi all,
I have what could be a very simple problem.
page1.jsp I set this session
session = request.getSession(true);
session.setMaxInactiveInterval(-1);
session.setAttribute( "license_key", "test");
response.sendRedirect( "page2.jsp" );page2.jsp
out.println( session.getAttribute("license_key") );output: null.
If I change the page1.jsp to
session = request.getSession(true);
session.setMaxInactiveInterval(-1);
session.setAttribute( "license_key", "test");
//response.sendRedirect( "page2.jsp" );
out.println( session.getAttribute("license_key") );output: test
I've not got a clue why this is happening. Any ideas?

When you are doing:
http://subdomain.domain.com
If you are using multiple domains, then you will need a new <Host ...> element in the config file for the subdomain, rather than working with <Context ...> elements.
What is happening, I believe:
You are using subdomain.domain.com, and a new session is being created for that domain (created as a cookie stored on your browser).
You make a request to subdomain.domain.com, which does not really exist as a <Host > so the default <Host > is used.
The session is checked for in the default <Host > domain (www.domain.com or just domain.com), and is not found, so a new one is created.
This is a guess, though, and looking at your cookies might help. And in this case, you would have to talk to your hosting people about getting a <Host > element set for you.
If I have time later I will double check to see if that makes sense or not...

LIBOVD ERROR - "validateContextToken: workflow session was not found for given context. Create a new workflow session with token"

Hello everyone,
I have the following scenario:
We're using "Oracle SOA Suite 11g 11.1.1.7.0" (Patched w/ 17893896) mainly for a BPM/Human workflow composite. Former, we were having the error bellow:
<Mar 16, 2015 1:13:03 PM BRT> <Error> <oracle.soa.services.workflow.query> <BEA-000000> <<.> Verification Service cannot resolve user identity. User weblogic cannot be found in the identity repository. Workflow Context token cannot be null in request.
ORABPEL-30511
When that error ocurred, no one was able to use the system (BPM/Human Workflow).
I opened an SR, and after some analysis from the support, it recommended me to set up "virtualize=true" in EM, and restarting the domain. Then it started logging the following:
connection to ldap://[10.200.10.57]:7001 as cn=Admin.
javax.naming.NamingException: No LDAP connection available to process request for DN: cn=Admin.
Looking up on support KB, I found this note Doc ID 1545680.1 and increased from Max size of Connection Pool 10 to 200. That did work successfully! Problem now is that the <SERVER>_diagnostic.log is being filled up with the following error:
[2015-03-31T16:03:46.421-03:00] [soa_server2] [ERROR] [] [oracle.soa.services.workflow.verification] [tid: [ACTIVE].ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: e0194e38aa6c9a2f:39fc1ff9:14c5def5247:-8000-00000000000a5653,0] [APP: soa-infra] <.> validateContextToken: workflow session was not found for given context. Create a new workflow session with token=51490173-e3d0-41dd-ae99-983915aa8454;;G;;Z+P7Oe9ABnoTUQD9ECryEW2l0/8yRcqPDyZsOWBCuzMmRgA3Qsj601TxmWQ87z2MjuwW5AH+KzgjIwkPmhJFdpc1FrE6Y/MrN1bxIDHJWu2/zP3iSNwKD07hRrh/U37Ea0TvaQyuaHJIog9y3Ptmzw==
One important point is that we're using only the embedded WLS ldap. So I am not 100% sure if we should be using the virtualize flag=true, once all docs I read point out that this should be done when using multi-ldap providers.
Also, I only got this error in the "diagnostic.log".
Although, no user has complained about using the system, I really want to work it out. Anyone has any suggestions?
Thanks in advance!

I have moved your thread from Certification to SOA Suite to get proper assistance.
Thanks,
Lisa

HT1911 I did not set up security question but it will not let me download anything from my new phone without answering them

I did not set up security question but it will not let me download anything from my new phone without answering them, please help

 Account Security Team (AST) 
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

Lock NOT set for: Archiving the data from a data target

Dear Expert,
I try to archive one of my info cube, when i start to write the Archive file the Free Space in the Archive folder not enough and it make the process error.
Then i try to changes the Archive folder to another path with enough free space. But when i start to write the archive file with new variant this error message came up :
==============================================================
An archiving run locks InfoProvider ZICCPS810 (archivation object BWCZICCP~0)
Lock NOT set for: Archiving the data from a data target
InfoProvider ZICCPS810 could not be locked for an archiving session
Job cancelled after system exception ERROR_MESSAGE
==============================================================
Please Help Me.
Wawan S

Hi Wawan,
If the earlier archive session resulted in error, please try to invalidate the earlier session in archive management and try running archive job again.
Hope this helps,
Naveen

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

The App Store want allow me to download new apps because I have not set up security questions.But I share an iTunes account with my friend. So if I set up the questions will my friend have to use and answer the same thing?

The App Store want allow me to download new apps because I have not set up security questions.But I share an iTunes account with my friend. So if I set up the questions will my friend have to use and answer the same thing?

They will have to be answered the first time when purchasing from a new computer or device.

Temp folder was not set for RTFStringbuffer Error

Hi,
We are using CR XI 11.0.0.895 and CR XI JRC is been used to generate the reports in PDF and RTF format.
While generating report of more than 1000 pages in RTF format throws the below mentioned exception
temp folder was not set for RTFStringbuffer
However, Generating reports in PDF format generates the report.
Find below the environment details which would helpful for the analysis.
CR XI 11.0.0.895
IE 6.0
MS-office 2003
Windows XP SP2
Reports JRC application deployed on Weblogic 8.1.4
Please suggest us a solution for this problem.
Thanks in advance.

If you run [Process Monitor|http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx], do you see any file access errors when the JRC tries creating a temp RTF file?
I think I've recommended this before, but have you tried the newest version of the JRC?
[https://boc.sdn.sap.com/node/19020]
The XI Release 1 keycode will work with it.
Sincerely,
Ted Ueda

Error "Lead selection not set for context node"

Hi everyone,
I've got a Tree control in WebDynpro ABAP and I've implemented an "expand all" button.
Here's the coding:
METHOD expand_node_rec.
DATA lo_el_child TYPE REF TO if_wd_context_element.
DATA lo_node_children TYPE wdr_context_child_map.
DATA wa_lo_node_children LIKE LINE OF lo_node_children.
DATA lo_nd_child TYPE REF TO if_wd_context_node.
DATA lo_kschl TYPE klschl.
DATA lv_has_children TYPE boolean.
lo_el_child = node->get_element( ).
lo_node_children = node->get_child_nodes( ).
node->get_attribute( EXPORTING name = 'KSCHL' IMPORTING value = lo_kschl ).
node->get_attribute( EXPORTING name = 'HAS_CHILDREN' IMPORTING value = lv_has_children ).
IF lv_has_children = abap_true.
    node->set_attribute( name = 'IS_EXPANDED' value = abap_true ).
ENDIF.
LOOP AT lo_node_children INTO wa_lo_node_children.
    lo_nd_child = wa_lo_node_children-node.
    me->expand_node_rec( node = lo_nd_child ).
ENDLOOP.
ENDMETHOD.
However I'm getting the error above: "Lead selection not set for context node".
Any suggestions?
Edited by: DEVELOPMENT THEMIS on Jul 7, 2011 6:34 PM

hi developement Themis,
I think u didn't diclare "node" as context node. So declare it as a context node before using as a context node..as below
DATA node TYPE REF TO if_wd_context_node.
or u can use "lo_nd_child " as ur context node in ur program in place of "node"
then I think this error will be removed.
thanks,
simadri

DTP error: Lock NOT set for: Loading master data attributes

Hi,
I have a custom datasource from ECC which loads into 0CUST_SALES. I'm using DTP & transformation which has worked for loading data in the past for this infoobject. The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes". I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7. Thanks in advance!

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

TS2446 Apple id was disabled, not disable for security reason...

I cannot start to download anything from AppStore now cause "You ID was disable". Already change passw then do follow support page but still cannot (Not "Disable for Security reasons, it just said have been disable"...
Please help me to solve this problem...

Sorry, My girl friend's Apple ID apparently having same problem. Could anyone help? It would be very much appreciated.
Keanu

HT5312 after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure and then I cannot login? now my iPhone has got all the cotacts lost.

after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure? and then I cannot login.

Try going to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

SVM state database replica Master flag not set for any replica

Hi guys,
Recently i have done root mirroring. After creating svm volumes, i ran the metadb command to create state database replicas on the replaced disk. I created only one replica that time. I tried creating additional replicas but it said like replica already exist on the slice. So i deleted the replica on the slice. Thn i created 3 replicas again & ran metadb. Output of metadb command is below. I found there is not master flag not set for any replica. I like to know whether it would create any issue or it is fine.
flags first blk block count
a u 16 8192 /dev/dsk/c1t0d0s7
a u 8208 8192 /dev/dsk/c1t0d0s7
a u 16400 8192 /dev/dsk/c1t0d0s7
a p luo 16 8192 /dev/dsk/c1t1d0s7
a p luo 8208 8192 /dev/dsk/c1t1d0s7
a p luo 16400 8192 /dev/dsk/c1t1d0s7

That shouldn't be any problem, i think the metadb's are just read at boot, and at boot one of the replicas will be choosen as the master, and will then get the m-flag.
I suspect that you deleted the replica which was used as the master during the last boot, which is why none of your replicas have the m-flag at the moment, which is not a problem as it will be choosing a new replica during the next boot.
.7/M.

How do i find out the answers i set for security questions?

I cannot remember the answers i set for my security questions. Just need to know how i can find them out??

The only way to recover from this is to reset your password using iForgot:
https://iforgot.apple.com/
It will send a temporary password to the email account associated with your Apple ID. Make sure it is an account that you can still access.
The email is sent immediately. If you do not receive it immediately, check your spam folder or email service's Trash.

SAP security - changing check maintain setting for security objects

I am trying to change the check maintain indicator for a couple of transactions
to alow me to manage access based on security objects that are not currently defined as check maintain. Specifically, I have updated the check indicator
(using SU24) to check maintain for object c_stue_ber on transactions MD11 and MD12 (planned order create/change). The transactions still do not check this object as expected. Does anything else need to be done to enable checking an
object that is not set up as check maintain originally?
Any help is appreciated.
Thanks,
Doug Scott

Hello Kerstin,
I also wrote a message to SAP and got the following response. Looks like there are no security checks for this object in these transactions.
Regards,
Doug
Response from SAP
03.04.2007 - 12:48:38 CET SAP Reply
Dear Doug,
An authority check on C_STUE_BER is not possible for the transactions
CO02, CO03, MD11, MD12, CO26, CO27, CO28, COOIS, COHV, CO05, CO05N,
CO04N, COMAC or CO46.
In CO01 we check if the user has the authority to resolve the BOM
(C_STUE_BER). After resolving the BOM we don't check any longer with
C_STUE_BER since we don't work with the BOM but with a component list
in the order (which is actually a copy or the BOM).
For this component list there is no authority check.
The component list is visible in CO02, CO03, CO26, CO27, CO28, COOIS,
COHV, CO05N, CO04N, COMAC, CO46.
For production orders we use authority C_AFKO_AWA. With this
authority you can limit the access to CO02, CO03 and the change of
production orders by other transactions.
But please note that there are still transactions
that will display the orders and its components without authority
checks. For example infosystem transactions (COOIS, COHV, CO26, CO27,
...) and other processing transactions (COGI, ...). For those
transactions you would have to limit access.
For the creation of planned orders MD11, the authority check C_STUE_BER
is not used. Here you can use M_MTDI_ORG to check on a MRP controller.
So you should enter the same MRP controller in the material master
of the troublesome products and only this MRP controller will be able
to create a planned order for this material.
I am sorry not to be able to offer you any better solution for this
problem.
Kind Regards
Eoin Donnelly
SAP Support Consultant (SCM)
SAP GSC Ireland

Session cookie not setting for secure domain in Chrome

Similar Messages

Maybe you are looking for