Problem with ANE - "ld: -pie can only be used when targeting iOS 4.2 or later"
I'm trying to compile a simple AIR Mobile app for iOS, incorporating an ANE to support Localytics
http://flashsimulations.com/2012/06/18/localytics-adobe-air-native-extension/
Compilation fails with the message "ld: -pie can only be used when targeting iOS 4.2 or later"
Surely 7.0 is later than 4.2! (I'm using Flex 4.6 - AIR 3.9 SDKS). Tried building with FDT and with Flash CC, and against earlier versions of the iOS SDK (6.0, 5.0).
Any suggestions?
thanks, but can you be more specific? Presumably I add something in this part:
<iPhone>
<InfoAdditions><![CDATA[<key>UIDeviceFamily</key>
<array>
<string>1</string>
<string>2</string>
</array>
<key>UIStatusBarStyle</key>
<string>UIStatusBarStyleBlackOpaque</string>
<key>UIRequiresPersistentWiFi</key>
<string>YES</string>]]></InfoAdditions>
<requestedDisplayResolution>high</requestedDisplayResolution>
</iPhone>
Similar Messages
-
AIR 3.8.0.440 / iOS: build fails with "ld: -pie can only be used when targeting iOS 4.2 or later"
With AIR 3.8.0.440, iOS build with "adt -package -target ipa-ad-hoc" fails with a linker error:
ld: -pie can only be used when targeting iOS 4.2 or later
What's the correct option to suppress this error or does it need a fix for adt?
In the app.xml,
<key>MinimumOSVersion</key>
<string>5.0</string>
is already present in the iPhone InfoAdditions section.
(Building the same app with AIR 3.8.0.370 is fine)Hi,
Can you make sure that both your old ane and new ane are not present in your extensions directory.
Also, how are you zipping/unzipping the ANE?
If you are on a Mac, try these steps on the terminal:
1) Create a new temp directory, say temp (mkdir temp)
2) cd temp
3) Copy the ane you need to make changes to into this directory.
4) unzip nameofane.ane
5) rm nameofane.ane
6) Make changes to the platform.xml file using a text editor or vim
7) cd to the temp directory again, (if you are now elsewhere)
8) zip -r nameofane.ane .
9) Copy the ane file created into your extensions directory, where you have placed the other extensions and then, package the IPA using adt.
If you are on Win,
1) Rename the .ane to .zip
2) Extract the contents of .zip
3) Make changes to platform.xml and save it.
4) Go back to the directory where you extracted the files, select all the folders/files and right click to zip them back.
5) Rename the .zip to .ane and then, package the IPA.
It should work. -
Session state can only be used when enablesessionstate is set to true.
When I try to open up a certain webpage it says; Session state can only be used when enablesessionstate is set to true. What does it mean and what should I do?
Contact the webmaster for that site and report the problem.
-
ASP Web Forms Error: Session state can only be used when enableSessionState is set to true
Hello,
I am developing a custom application page for a custom Web Forms I am creating, which I plan on using for custom task form into SharePoint 2010 Foundation.
Currently, I am trying to test it in Debug Mode using Visual Studio 2010 but when I am trying to use Sessions I get the error:
Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. Please also make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration>\<system.web>\<httpModules> section in the application configuration
I've already done this on trying to fix:
On my page
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="TestForm.aspx.cs" Inherits="TestForm" EnableSessionState="True" %>
And on my web.config
<pages enableSessionState="true">..<httpModules>
<remove name="Session" />
<add name="Session" type="System.Web.SessionState.SessionStateModule, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
</httpModules>
Note: I am getting an error when I try to add <module> into web.config
ASP .NET State Service is currently running.
And the part where it keeps error is when in PageLoad, I try to set a List object something like this:
List<object> myobject
get
if (Session["object"] == null)
Session["object"] = new List<object>();
return Session["object"] as List<object>;
set
Session["object"] = value;
protected void Page_Load(object sender, EventArgs e)
myobject= new List<object>();
BUT the error still persists! I also try to restart IIS but still the error still happens.
I am running out of ideas so can you help me out?
Thank you!Could be your skype intercepting your requests at 80 port, in Skype options uncheck
Or Your IE has connection checked for Proxy when there is no proxy
Or your fiddler could intercept and act as proxy, uncheck it!
Solves the above problem, It solved mine!
HydTechie
HydPhani -
My prepaid card is lately unacceptable..can you help me plz?
The iTunes Store typically does not take prepaid "credit" cards since they normally have no billing address associated against which to verify. Why the card worked before but not now I don't know, though Apple has been tightening up their security and that may have finally caught up with that card. You can try contacting the iTunes Store and asking if there is any way to use your card, but they may just tell you that it's not possible.
http://www.apple.com/emea/support/itunes/contact.html
If it is not, then you will need to use a true credit card or purchase prepaid ITunes cards, if Apple has issued them in your country.
Regards. -
With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.
From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked. -
Problem with Connection Manager. Can't change connection string / Server name
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin-top:0cm;margin-right:0cm;margin-bottom:10.0pt;margin-left:0cm;line-height:115%;font-size:11.0pt;font-family:'Calibri','sans-serif';}
.MsoChpDefault
{font-size:10.0pt;}
.MsoPapDefault
{line-height:115%;}
@page Section1
{size:612.0pt 792.0pt;margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.Section1
{page:Section1;}
Hi,
I have copied a number of SSID packages from a live server to my test server and am trying to get them up and running but I have a problem with the connection. The only thing that is different is the server name. I decided to keep the same connection in the connection manager as it is referenced in a dtsConfig file. I changed the dtsConfig file to reference the new servername [Data Source= new test server name]. I also check my paths and they are pointing to the correct config locations etc.
I found this post which was similar to my problem but I still get problems with the connection
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1319961&SiteID=1
I updated the connection by changing the server name in the actual connection. I did this from the data flow tab in the Connection Managers sections (MS Visual Studio). Right clicked - Edit - changed the name of the server name to my test server and selected the database. Test connection was fine, and saved this.
Once I saved this, the connection string changed to my current test server in the properties of the connection. However when I run the package I get the following error:
Error: 0xC0202009 at ReportsImport, Connection manager "myconnectionstring": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Error: 0xC020801C at Myprocess import from file, BuyAtReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "myconnectionstring" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Myprocess import from file, DTS.Pipeline: component "ReportsImport" (79) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Myprocess import from file, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Myprocess import from file: There were errors during task validation.
So even if I change the existing connection properties and save and Build my package again, my connection properties (connectionstring, servername etc) all revert back to its original data source when I re-open the package. Simply it does not seem to be saving the connection properties i put in.
What am I doing wrong or how can I change the existing connection manager to look at the new server. The database is the same and I have full admin privilege on the server.
I don't want to recreate my packages as there are alot and they are not simple.
After changing the connection properties, saving and reloading I get a connection error. But this is because it is not retaining the new connection manger setting i entered.
Incidentally - I created a new SSID to perform a simple connection and write to the the server and it was OK so there is no problem with actually seeing the my test server.
Thanks in advanceYes, the package is in visual studio and I have executed it. There are no errors but in the output i have the error message about my connection. My dtsConfig file is added to the project in the 'Package Configuration Organizer' and path and files are correct. This is the output error:
Error: 0xC020801C at xx import from file, xxReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "myconnectionname" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I will try and run it using dtexec.exe. if I have two config files do i use
dtsexec.exe /f <packagename> /conf <configfile> /conf <secondconfigfile> -
Fedex can only be used with dreamweaver using metric, not pounds (lbs)
Fedex can only be used with dreamweaver using metric, not pounds (lbs), evidently?
This as per their tier 2 tech suport.
They say I should just convert to metric, no joke!
Any ideas would be greatly appreaciated?
Also a warning to anyone thinking of using business catalyst for their site, sorry, their business.
Their note to me:
Your request (# 82816) has been solved. To reopen this request, reply to this email or go to the Help & Support page.
Silviu Ghimposanu (Adobe Business Catalyst Support)
Apr 14 15:23
Thanks for contacting us Michael
Our engineering team has detected some problems when doing weight conversions (from the quantities entered in the interface to what’s used when making the API calls to FedEx) -
He have added this to our internal bug tracker to be fixed for one of the future releases.
I realise that this might not be what you wanted to hear,but at this moment we do't have a workaround in order to send the
dimensions in pounds and not in KG
Sorry for this inconvenience!
Kind regards,If you're in US it will be in pounds. If your site is set any other country
in the rest of the world it will be metric. So BC or as you call it
Dreamweaver will look at the site country, which you set when creating the
site -
Why I can't open google maps on Safari? Everything have been working normally with my computer. But this problem with google maps I can't fix
Do you have an example? I develop Google maps for Web pages and haven't had problem with Safari and its extensions, only FF which I took out all the addons and plug-ins, but it wouldn't surprise if the Google map code doesn't display the map or information for the map or doesn't work with newer versions of Safari.
-
Item category S can only be used with account assignment category
Hello Gurus,
When i tried to create a PO then error "Item category S can only be used with account assignment category" is coming
for my plant and material.
Could you please tell me where i have to maintain the setting of account assignement for a plant or material.
In TA:-OMG0 item catergory S is maintained for a account assignement F but still this issue is coming.
I think there is a problem in plant or a material.
Please help me.
BRHi,
How you are creating PO ,so that you have error "Item category S can only be used with account assignment category"
Check what t.code used for your PO creation and what document type used for your PO creation- which result defaulting item category S which in turn asking for with account assignment category.
Cross check transaction variant or screen variant used for your PO creation!
Regards,
Biju K -
SQL 2012 SP 1 CU4 applied. Now getting " Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with VERSION restriction of 2.0 or later"
Any ideas what could be causing it to send the incorrect version?amaltsev1,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
I'm having problems with my email account. I receive emails when I'm in a wifi zone. But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network. Only when I power off the phone and turn it back on, do I receive the emails through the cellualr network (again with the wifi off)
In your email settings on the phone check to make sure it is set to receive emails on cellular network. It's a feature you can turn off so your phone isn't constantly updating emails on the cell network, but if you are usually in a place with wifi and aren't concerned about going over your data allowance, you can turn it back on.
-
I have some problems with my iPhone. Can i change my iphone from USA (ME495LL/A) in Germany? Warranty is ok till october 2014
No you cannot. The iPhone warranty is only good in the country of purchase. You would need to bring it back to the US, or send it to someone that could take it to an Apple store in the US. Apple will not accept international shipments.
-
New 4s connected to my Lexus bluetooth. Having intermittent problem with calls. I can hear them, but they can't hear me. Never a problem with 3gs phone. Anyone else having this problem?
I ended up getting a new phone, straight through Apple. I called their technical support and went through all he basics again and they decided to replace it. Was a pretty quick process - after defaulting and resetting the whole phone (about 2 hours), I called them back to inform that there was no change, so they set up the order.
I had to give my CC# so they could hold a charge on it (in case I didn't send my old phone bach, which they sent me a pre-posted package to send it in anyway). Had a brand new iPhone 4S in my hands in 4 days, which was pretty decent. I had uploaded everything previously to iCloud, so setting up the new phone was a snap.
Only thing I really didn't like was they charged me almost 30 bucks for shipping or processing, or something. Not so sure that should have been my responsibility after spending so much on a brand new product, only to have to have it warrantied after, like, a month. -
I have problem with account that i can't make update or buy from app store
There is massage appear in my payment page that i must contact with i tunes support to complete this transaction
Please help me to fixe this problem as soon possible
Hany hassan
0096597617317
0096596677186
Thank youYou need to Contact iTunes Support...
Apple Support iTunes Store Contact Us
Maybe you are looking for
-
what are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac
-
Links don't work after publishing
Hi! I'm new to using IWeb and I have recently encountered a problem: When I publish the content to a folder, the pages that I initially designed, don't appear exactly the same in the new folder. The links in the navigation menu don't work in the new
-
Is it possible to convert 2013 Project Professional trial version to Standard full version?
I am closing in on the end of my trial period for Project 2013. I have found that i do not need the Professional version and have therefore purchased a full retail copy of Standard. Is there a way to convert the Prof trial version to Standard, or do
-
Real Player, Windows Media Player and Quicktime plugin problems - HELP!
All I want to do is view game trailers in different website in either real, wmv or mov etc. I have downloaded the programs (free ones) and installed them but they still persist not to work in the browsers. The program themselves work fine just not in
-
Missing mediadatabase.db3 on iMac
Hello, I am hoping someone may be able to help me! I recently installed some PSE actions and deleted my mediadatabase.db3. I reopned PSE and everything loaded correctly and is working great. However, it does not seem to have rebuilt. I have a fe