Session Timeout Setting in Business Intelligence Platform 4

Greetings. We are using Business Intelligence Platform 4 SP 2.5. We use LDAP authentication for logging in to the CMC, BI Launchpad, and Lifecycle Management console. Our sessions expire after 10 minutes (of either activity or inactivity). I haven't been able to find the setting that controls the timeout. Does anyone know?
Thank you in advance,
Dave

Hi Dave,
TO make the change for the timeout we need to navigate to following location:
1. Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps\BOE\WEB-INF
2. Open the web.xml. Search for the "session-timeout" and change the value to as per your requirement.
3. This change would take effect on both CMC and BI LaunchPad.
4. Restart the Tomcat.
At <INSTALLDIR>\Tomcat6\conf\web.xml change 30 to 60:
 <session-config>
 <session-timeout>60</session-timeout>
 </session-config>
Regards,
Sonia

Similar Messages

Install BusinessObjects Business Intelligence platform 4.1 SP2 for the first time

We plan to install BusinessObjects Business Intelligence platform 4.1 SP2 for the first time. My question is, can we install BO 4.1 SP2 straight? Or do we need to install 4.1 first, then apply SP2?
Thanks.

Hi Sophie,
If you get the BO 4.1 SP2 Full Build package, you can directly install it. The Full Build is not available in SAP SMP then install BO 4.1 and then upgrade to SP2 Patch.
HTH,
Niranjan.

Hi I have two questions. I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users? How is the session timeout set? Thanks, YS

I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users?
Um, there is no such thing as NAS4.1.
I'm assuming that you mean NAS4.0 (maybe NAS4.0sp1?). If so, then the session timeouts are specified in the session section of the NTV configuration files.
AFAIK, you can specify session timeouts on a per user basis.

Portal Session Timeout Setting

There is a JServ session and a portal session. I know how to control session timeout and session clean up frequency in JServ - that's in zone.properties. But, I dont know how to set timeout for portal session, i.e., I'd like to have the user be forced to login again when he has been idle for 15 mins - and only if he has been idle. Jserv session settings are not sufficient for this because Portal has it's own session that must time out.
How to set this timeout value (I'm using my own provider which has a timeout setting in zone.properties and includes a bunch of JSP portlets)? Also, is there a clean up thread for which the frequency has to be set?

I've contacted metalink weeks ago, and this is NOW, a know bug...
Incredible... Oracle just DO NOT TEST their products... Even a simple SESSION timeout do not work. Also, if I click back after "I log In and Log out" ... Session still up without have to login again!
BUG 2442268

How does Oracle Business Intelligence aid in oil exploration workflows?

I am currently an Msc student of the University of Surrey in the United Kingdom and am working on my thesis involves the use of Oracle Business Intelligence platforms in establishing workflows and processes when creating a digital oilfield for the oil and gas industry. I will be glad if you can tell me with a case study how you have been able to implement the Oracle Business Intelligence solution successfully in any company and how defines the data being used in terms of usefulness, completeness, clarity, reduction in costs, accuracy and precision. My thesis involves making a comparison between IBM intelligent solution systems and Oracle Business Intelligence platforms for oil and gas exploration. I will be glad if someone can really explain this to me. Thanks in anticipation of a favourable response.

Agile PLM Business Intelligence application is a business ready PLM performance management solution that offers comprehensive analytical insights into Agile PLM data. This application includes pre-built and pre-packaged content at couple of levels:
1. pre-built Multi-Dimensional Schema (star schemas) designed for analysis and reporting on Product Quality, Change Performance Management and Product Risk Management
2. pre-built ETL to load data from Agile PLM into Multii-Dimensional Schema and this is developed using Oracle Data Integrator (ODI) platform technology
3. pre-mapped BI repository metadata for core PLM subject areas of analysis along with a set of pre-packaged functional & role-based Dashboards. This is built using core capabilities of OBIEE platform capabilities
Hope this clarifies.

Session timeout Hyperion Planning 4.0.1

Hello, on our clients the planning-session times out after 3 minutes. I have set the session timeout setting for Apache Tomcat 4.1 in the File web.xml to the number 60, but the session already times out after 3 minutes. Can you help me? Best regards, Rainer

This could be a setting on the network/intranet/internet at the client. Had a similar problem at one of our clients and it was down to a 3 minute timeout on any request over the intranet. Worth a check with the IT department on it. Hope this helps. Andy King www.analitica.co.uk

Issue in ATG integration with Oracle Business Intelligence

Hello,
I am setting Oracel Business Intelligence up for Oracle ATG 10.1.
I am using CRS application to populate data to Data warehouse schema. I can see all components like generating log files, loading log file in to database are working file. I can see data in DW schema. I am using completely ATG's default implementation; I have not made any customization so far.
Here is environment details:
OS : Windows 7 (64 bit)
ATG : 10.1
JBoss : jboss-eap-5.1
JDK : 1.6.0_25-b06
Database: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
Oracle Business Intelligence : Oracle BI EE 11g Release 1 (11.1.1.5)
Used ofm_rcu_win_11.1.1.5.0 tool for creating OBI DB schema.
I am getting below exception if I access Report in OBI.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 17001] Oracle Error code: 907, message: ORA-00907: missing right parenthesis at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
SQL Issued: SELECT s_0, s_1, s_2, s_3, s_4, s_5, s_6, s_7, s_8, s_9, s_10, s_11, s_12, s_13, s_14, s_15, s_16, s_17, s_18, s_19, s_20, s_21, s_22, s_23, s_24, s_25, s_26, s_27, s_28, s_29, s_30, s_31, s_32, s_33, s_34, s_35, s_36, s_37, s_38, s_39, s_40, s_41, s_42, s_43 FROM ( SELECT 0 s_0, "ATG"."Date"."Day Timestamp" s_1, "ATG"."Line Item Fact"."# Orders" s_2, "ATG"."Line Item Fact"."Avg Order Discount" s_3, "ATG"."Line Item Fact"."Avg Order Size" s_4, "ATG"."Line Item Fact"."Avg Order Value" s_5, "ATG"."Line Item Fact"."Gross Revenue" s_6, "ATG"."Line Item Fact"."Units" s_7, FILTER("ATG"."Line Item Fact"."# Orders (Prior Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_8, FILTER("ATG"."Line Item Fact"."# Orders (Trailing 7 Day Pct Var)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_9, FILTER("ATG"."Line Item Fact"."# Orders (Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_10, FILTER("ATG"."Line Item Fact"."Avg Order Discount (Prior Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_11, FILTER("ATG"."Line Item Fact"."Avg Order Discount (Trailing 7 Day Pct Var)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_12, FILTER("ATG"."Line Item Fact"."Avg Order Discount (Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_13, FILTER("ATG"."Line Item Fact"."Avg Order Size (Prior Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_14, FILTER("ATG"."Line Item Fact"."Avg Order Size (Trailing 7 Day Pct Var)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_15, FILTER("ATG"."Line Item Fact"."Avg Order Size (Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_16, FILTER("ATG"."Line Item Fact"."Avg Order Value (Prior Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_17, FILTER("ATG"."Line Item Fact"."Avg Order Value (Trailing 7 Day Pct Var)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_18, FILTER("ATG"."Line Item Fact"."Avg Order Value (Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_19, FILTER("ATG"."Line Item Fact"."Gross Revenue (Prior Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_20, FILTER("ATG"."Line Item Fact"."Gross Revenue (Trailing 7 Day Pct Var)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_21, FILTER("ATG"."Line Item Fact"."Gross Revenue (Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_22, FILTER("ATG"."Line Item Fact"."Units (Prior Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_23, FILTER("ATG"."Line Item Fact"."Units (Trailing 7 Day Pct Var)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_24, FILTER("ATG"."Line Item Fact"."Units (Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) s_25, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."# Orders (Prior Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_26, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."# Orders (Trailing 7 Day Pct Var)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_27, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."# Orders (Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_28, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Avg Order Discount (Prior Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_29, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Avg Order Discount (Trailing 7 Day Pct Var)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_30, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Avg Order Discount (Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_31, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Avg Order Size (Prior Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_32, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Avg Order Size (Trailing 7 Day Pct Var)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_33, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Avg Order Size (Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_34, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Avg Order Value (Prior Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_35, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Avg Order Value (Trailing 7 Day Pct Var)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_36, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Avg Order Value (Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_37, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Gross Revenue (Prior Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_38, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Gross Revenue (Trailing 7 Day Pct Var)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_39, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Gross Revenue (Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_40, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Units (Prior Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_41, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Units (Trailing 7 Day Pct Var)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_42, REPORT_AGGREGATE(FILTER("ATG"."Line Item Fact"."Units (Trailing 7 Days)" USING (("ATG"."Date"."Day Timestamp" IN (TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))))) BY ) s_43 FROM "ATG" WHERE (("Date"."Day Timestamp" BETWEEN TIMESTAMPADD(SQL_TSI_DAY,-1*60,date '2012-07-22') AND TIMESTAMPADD(SQL_TSI_DAY,-1,date '2012-07-22'))) ) djm
Has anybody come across this issue?
Thanks,
Mukesh
Edited by: Mukesh on Jul 22, 2012 11:57 AM

Hello Andrew,
1.) DW schema in Oracle (‘Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production’).
2.) This is for every ATG's analysis. I have not authored anything custom.
I am sure connection information is correct in ATG.RPD file. I used to get different error like incorrect login or unable to connect if it was wrong and those are no more, So I
believe connection URL is correct. I am not sure if need disable/enable something or do some specific configuration in DB connection in ATG.RPD.
Thanks,
Mukesh
Edited by: Mukesh on Jul 23, 2012 3:50 PM

Idle/session timeout vs sleeping client

Hello,
We will soon upgrade to WLC from 7.4.110 to 7.6.120 and find out a new feature : spleeping client.
I was wondering the purpose of the sleeping client vs idle timeout/session timeout.
In our case we have an idle client set to 14400 seconds (4H) and session timeout set to 28880 (8H) for web-auth SSID. Thus, even if a laptop is sleeping for 3H it will still be authenticated as the idle timeout has not been reached.
Based on those facts, what will be the purpose of the sleeping client feature as it must be set higher than the session timeout ?
Thanks for your support :-).

make sure that the session timeout is greater than the client idle timeout, otherwise the sleeping client entry would not be created.
After entering the appropriate login credentials for web-auth, the client get authenticated and moves to RUN state.
Now if the client configured is idle for 300 seconds (default idle timeout value) or disconnects from the WLAN it is connected to, then the client will move to sleeping clients.
Once the client is moved to the Sleeping Clients, the timeout session starts and the remaining time before the client entry is deleted/cleared is displayed.
If the client wakes up or joins back to the same WLAN, it doesn't require re-authentication.
the number of sleeping clients that are remembered has increased to 25000 from the previous 9000. A larger number of sleeping clients are remembered even after waking up, on the wireless network with high-scale Cisco WLCs. This eliminates the need for user intervention to re-enter credentials for a greater number of clients.

HFM and Session Timeout

Is there any way to change the time before you are automatically logged out of an HFM (or Workspace) web session due to inactivity?
Thanks.
Terri T.

Hi,
Try something like this:
Workspace timeout settings:
● Application server session timeout— Time in minutes after which the application server
times out a session if no requests are received for that session
❍ In \Workspace deployment\WEB-INF\web.xml:
<session-config>
<session-timeout>60 </session-timeout>
</session-config>
❍ Default is 60 minutes
Note:
All Reporting and Analysis Web applications session timeouts should be greater than
10 minutes.
● Workspace timeout—Time in minutes after which Workspace warns and logs out inactive
users
Workspace sends “keep alive” requests to all the application servers (Workspace, Financial
Reporting, Web Analysis, and Oracle's Hyperion® Performance Scorecard – System 9). If
there is no activity in Workspace per the session timeout setting, the user is warned that the
session is about to end. If the user does not take action within 5 minutes, the user is logged
out.
❍ In \conf\subcontext.properties of the Workspace Web application:
KeepAliveInteral=10
SessionTimeout=30
22 Administration Tools and Tasks
❍ Default is 10 minutes for keep alive and 30 minutes for session timeout
Regards,
Marcin Kuzdra

Setting Session Timeout for HANA Cloud Portal

Hi all,
is there any way for setting the session timeout period on HANA cloud Portal?
If not, what is the predefined session timeout?
Thank you in advance.
Silvia Grabmann

Hi Silvia,
Session timeout is 20 minutes and cannot be changed. In fact it is configured at the platform level.
Regards,
Ifat.

How to set session timeout per user

Hi,
Ho do I set the session timeout per User in the
Application.cfm File??
I tried using
<cfif SESSION.UID EQ 1>
<CFAPPLICATION NAME="appControl" SESSIONMANAGEMENT="Yes"
sessiontimeout="#CreateTimeSpan(0,0,20,0)#">
</cfelse>
<CFAPPLICATION NAME="appControl" SESSIONMANAGEMENT="Yes"
sessiontimeout="#CreateTimeSpan(1,0,0,0)#">
</cfif>
But this didnt work because the cfapplication seems to have
to be at the top before I call the variable SESSION.UID which
I set on my login page..
Someone know how to do this??
Regards
Martin

Martin,
Your code example cannot work because the "session" scope
doesn't exist until your application scope is defined. So you have
to handle this manually. Here's how you can get it done. First,
define your application to the maximum sessiontimeout you want to
have.
<CFAPPLICATION NAME="appControl" SESSIONMANAGEMENT="Yes"
SESSIONTIMEOUT="#CreateTimeSpan(1,0,0,0)#">
Then, I don't know how you are doing your login
authentication but when you have authenticated the user, you need
to define the userid and the most recent activity in the session.
Also determine your timeout value based on the userid. See example:
<CFIF IS_AUTHENTICATED>
<CFSET session.user.uid = form.userid>
<CFSET session.user.most_recent_activity = now()>
<CFIF session.user.id eq 1>
<CFSET session.user.timeout_mins = 20>
<CFELSE>
<CFSET session.user.timeout_mins = 1440>
</CFIF>
</CFIF>
Now, all you have to do is check whether the user has been
idle for too long and kill the session by purging all session
variables. For example:

<CFIF structKeyExists(session, "user") and
structKeyExists(session.user, "id")>

<CFIF datediff("n", session.user.most_recent_activity,
now()) gt session.user.timeout_mins>

<CFSET StructClear(session)>

<CFELSE>

<CFSET session.user.most_recent_activity = now()>
</CFIF>
</CFIF>

Error in submiting request set from Daily Business Intelligence Administrat

I am getting the following error when submitting "ADS Incremental Financials Request Group" request set from "Daily Business Intelligence Administrator" responsibility in vision R12 instance :
APP-FND-01564: ORACLE error -1116 in SUBMIT: others
Cause: SUBMIT: others failed due to ORA-01116: error in opening database file 11
ORA-01110: data file 11: '<path>.dbf'
ORA-27041: unable to open file
SVR4 Error: 24: Too many open files
Additional information: 3.
The SQL statement being executed at the time of the error was: &SQLSTMT and was executed for the file &ERRFILE.
OS is Solaris 10.5
in a document it was suggested to increase the ulimit -n equal to ulimit -Hn and in solaris for R12 nofiles (descriptors) = 65536. Both ulimit -n and ulimit -Hn have been set to 65536 but still the error is showing.
Plz Helppp

Check Note: 549806.1 - ADS Incremental Financials Request Group errors out with APP-FND-00806
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=549806.1

Setting session timeout in OracleWeblogic Server

Hi All,
I have doubt in setting session time out in Oracle WLS server 12c. Please suggest,
There are two ways as i know editing the below files.
1) weblogic.xml
2) web.xml
But when I open the weblogic.xml it has the below code, if we edit the value in
<timeout-secs>3600</timeout-secs>
the value implied for the admin console only as i know, the admin console will ask the user to re-login if the session is idle for morethan 6 mins.
But If there is an application deployed like a bank.war file and customer is accessing the application. I want to set the user session time out to 2 mins i.e 120 seconds. How to set this in the server level ?
Oracle Webogic server level ?
<session-descriptor>
 <timeout-secs>3600</timeout-secs>
 <invalidation-interval-secs>60</invalidation-interval-secs>
 <cookie-name>ADMINCONSOLESESSION</cookie-name>
 <cookie-max-age-secs>-1</cookie-max-age-secs>
 <url-rewriting-enabled>false</url-rewriting-enabled>
</session-descriptor>
In the default web,xml there is no param called timeout..
Thanks
Venkat

Hello Venkat,
I have implemented the same in my Application(OBIEE).Check it may helpful for you.
Sasi Nagireddy: HOW TO CONFIGURE SESSION TIMEOUT IN OBIEE-11G..
Thanks,
Sasi Nagireddy..

Oracle Business Intelligence How to choose data set based on a condition

Hi,
I am using Oracle Business Intelligence for creating reports, i am facing a situation where i have two quries (data sets in BI), one to display a Failure message and other to fetch data from the table to be displayed in the report.
The problem is i am unable to choose which data set to run based on a condition. How to use a condition based on which the dataset will be run
For example : i will read a table column value if it is 'S' means success, then i have to run the dataset to fetch the data from the table.
If the column value has 'F' then i have to run the dataset which will display failure message
Please let me know if any of you have any idea on this
Thanks in advance
Muthukumaran

Hi Chinna,
You have to use some scripting as well as coding to perform the tasks listed by you. First of all make your form Dynamic, In your Adobe lifecycle Designer, open your form,
Goto, File --> Form Properties,
Goto the Defaults tab,
Select "Dynamic PDF" for the XDP Preview Format:
Click OK.
This setting will now allow dynamicity in your Form, when you view it in PDF Preview tab.
For Hiding/Unhiding the fields/SF, you can use the presence property and set it based on the conditions. like:
if (this.rawValue == null)
TextField1.presence = "hidden";
For your second task, you may map a method corresponding to onSubmit event of the IF and write the code to create the workflow and make RFC call here.
For third one, you need to convert the PDFObject from Binary context into a byte array and save it at appropriate location.
Hope I have answered all your queries.
Cheers,
Arafat

SAP TechEd 2011- Business Intelligence Sessions

*Looking for answers on Business Intelligence and Performance Management, check out the related educational sessions at SAP TechEd 2011 ([Las Vegas|http://bit.ly/pdowXJ], [Bangalore|http://bit.ly/p0WNfG], [Madrid|http://bit.ly/oKQb79]) [Register today|http://www.sdn.sap.com/irj/scn/sapteched]!*
Edited by: Erica Morales on Aug 5, 2011 1:36 AM

Hi,
you must check in sap teched site and register it, the link as below
[SAP Teched Banglore 2011|http://www2.sapevents.com/SAP/TechEd2011Bangalore/index.cfm?fuseaction=agenda.sessionCatalogueHOS&view=overview]
Thanks,
Jansi

Session Timeout Setting in Business Intelligence Platform 4

Similar Messages

Maybe you are looking for