Set AppSet Parameters description

Hello everybody,
I've been searching for a document that contains all the parameters that can be set inside the Web admin tasks in the "Set AppSet parameters" but i've found none. I'd appreciate if someone has this information, just the description for each id and what's for would be great.
Thanks in advance
Nidia

Hi Nidia,
This information is available in the Application Help for version 7.5 on http://help.sap.com/.
For version 7.0, it is in the BPC Administration Guide.
Thanks,
Scott

Similar Messages

  • Set Application Parameters link not activate under Web Admin Tasks of Admin

    In the " How to do currency translation..." paper, there is a statement as following:
    "The currency conversion business rules tables can also be activated by going through the web
    admin parameters where the following parameter is set to u201C1u201D.
    FXTRANS                                              1
    However after I login to BPC Admin consol, I notice that Set Application Parameters link not activate under Web Admin Tasks of Admin Consol.
    Where should do this? Should I do it under Set AppSet Parameters?

    DFW,
    In the non-web Admin Console, you should also be able to accomplish the same thing by going to the application, clicking "Modify application", then "Change application type", then "Modify Application", then choosing the "Currency Conversion" application option.
    In general, this is how business rules can be turned on without messing around in the application parameters, and should really be the preferred method unless you have done some kind of customization that an application modification will interfere with.
    Ethan

  • Unable to set  kernel parameters using solaris 10

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx
    guru

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx
    guru

  • Unable to set kernel parameters using Reource Control

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx
    guru

    I finally had some time to find the actual syntax for tuning process.max-msq-qbytes and process.max-msg-messages. prctl will change those paramaters for an existing process.
    As a proof of concept I changed process.max-msg-messages to a 64k. process 2221 is my shell.
    prctl -n process.max-msg-messages  -r -v 64k 2221
    bash-3.00# prctl 2221
    process: 2221: -csh
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    process.max-port-events
            privileged      65.5K       -   deny                                 -
            system          2.15G     max   deny                                 -
    process.max-msg-messages
            privileged      64.0K       -   deny                                 -
            system          4.29G     max   deny                                 -
    process.max-msg-qbytes
            privileged      64.0KB      -   deny                                 -
            system          4.00GB    max   deny                                 -And now to make this persist across reboots...
    So long as I'm experimenting, I'll use projadd and add a new project which just includes me and not the rest of the users in the group staff.
    bash-3.00# projadd -p 115 -U testuser \
    -K "process.max-msg-messages=(priv,64K,deny)" \
    -K "process.max-msg-qbytes=(priv,64K,deny)" \
    user.me This creates the following /etc/project:
    (note the last line is all on one line in the real file minus the \.)
    placer% cat /etc/project
    system:0::::
    user.root:1::::
    noproject:2::::
    default:3::::
    group.staff:10::::
    user.me:115::testme::\
    process.max-msg-messages=(priv,64000,deny);process.max-msg-qbytes=(priv,65536,deny)After a reboot I checked the values by loging in under my user and running prctl.
    placer% prctl $$
    process: 419: -csh
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    process.max-port-events
            privileged      65.5K       -   deny                                 -
            system          2.15G     max   deny                                 -
    process.max-msg-messages
            privileged      64.0K       -   deny                                 -
            system          4.29G     max   deny                                 -
    process.max-msg-qbytes
            privileged      64.0KB      -   deny                                 -
            system          4.00GB    max   deny                                 -
    process.max-sem-ops
            privileged        512       -   deny                                 -
            system          2.15G     max   deny                                 -
    ...Solaris 10 has different tunables and default values from 8 and 9. It's default tunables should be good for most applications per a given system's hardware. There are some great blog articles, and discussions on opensolaris.org and blogs.sun.com on tuning that explain the intent of tuning and why we shouldn't have to tune.
    Cheers,
    ~~sa

  • Unable to set kernel parameters using Reource Control in solaris 10

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx

    HI,
    I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
    Can anyone help me in setting the above kernel parameters.
    Its not possible to set it thru /etc/system.
    thanx

  • Using SET GET parameters in ITS

    Hi All,
    Is it possible to use set get parameters in ITS. We want to set some parameters in a BADI and read the value in ITS Template .
    Or is there any other method to do this?
    Thanks,
    Anubhav

    Sure. In your abap program use the following code
    *  ITS macros
    INCLUDE avwrtcxm.
    GET PARAMETER ID 'YOUR_PARAMETER' FIELD SAVE_PARAMETER.
    field-set u2018~YOUR_PARAMETERu2019 1 SAVE_PARAMETER.
    field-transport.
    in the template you can now use ~YOUR_PARAMETER.
    regards,
    Klaus
    Edited by: Klaus Layer on Feb 3, 2009 5:05 PM

  • Problem with SET GET parameters

    Hi all,
    I am facing a problem using SET and GET parameters.
    There is a Z transaction(Dialog program) where some fields of screen are having parameter ID's. That transaction is designed to diaplay/change status of only one inspection lot at a time.
    Now I need to call that transaction in a loop using BDC. I mean i need to update the status of multiple inspection lots(one after the other). Before calling the transaction I am using
    SET PARAMETER ID 'QLS' FIELD lv_prueflos.
    Unfortunately the transaction is only changing the first inspection lot. When I debugged I found that the screen field is changing in PAI. Even though in PBO it shows the next value, when it goes to PAI it is automatically changing to the first value(inspection lot).
    Example: Inspection Lots : 4100000234
                                               4100000235
                                              4100000236
    Now first time when the call transaction is being made the status of insp lot 4100000234 is changed. For the second time when insp lot 4100000235 is being passed in PBO ican see this. But the moment it enters PAI the screen field changes to 4100000234.
    Could you pls help me in solving this issue.
    Thanks,
    Aravind

    Hi,
    Problem with SET GET parameters
    Regarding on your query. Follow this below link.
    It will help you.
    Re: Problem with Set parameter ID
    Re: Problem in Set parameter ID
    I Hope it will helps to you.
    Regards,
    Sekhar

  • How to use SET & GET Parameters in Module Pool

    Hi Friends,
    Can anyone please tell how to use SET / GET parameters and PARAMETER ID for a text box (Input / Output field ) in module pool? What is the purpose and where do we need to do coding for it?
    Note : I will definitely give the marks for good responses.
    Thanks in advance,
    Pradeep

    Hi Pradeep,
    You can save values in the SAP memory using a parameter ID. These
    are user and terminal-session specific, but available to all internal and
    external sessions.
    SET Parameter copies the corresponding field contents into the SAP
    System memory in the PAI processing block.
    GET Parameter copies the corresponding field contents from the SAP
    memory at the end of the PBO processing block, after data has been
    transferred from the program, if the screen field still has its initial value
    You can link an input/output field to an area of the SAP memory in the
    ABAP Dictionary.
    When you use an input/output field that is defined in the ABAP
    Dictionary, its parameter ID is displayed in the Dictionary attribute
    Parameter ID in the Screen Painter.
    Usage
    SET PARAMETER ID: ’CAR’ FIELD space,
    ’CON’ FIELD space,
    ’DAY’ FIELD space.
    Here is the link that explains the usage of GET/SET in detail
    <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db9e0435c111d1829f0000e829fbfe/content.htm">http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db9e0435c111d1829f0000e829fbfe/content.htm</a>
    Regards,
    Sharadha

  • Problem in setting the parameters for an OASingleSelectionBean

    Hi,
    I have created an advanced table, for which I have to allow single selection or mutliple selection according to my requirements ie dynamically. So, for single selection, I have created a OASingleSelectionBean dynamically and add this to my advanced table bean.
    I also want to set Action for the single selection option. I have set the action using
    setPrimaryClientAction() which takes an argument of oracle.cabo.ui.action.FirePartialAction class. Now I also want to pass certain parameters when the single selection event happens.
    For that, I have taken an object of FirePartialAction class and but using the FirePartialAction class .setParameters(oracle.cabo.ui.collection.Parameter[]) function. I am setting the parameters using
    Parameter class object.setKey
    Parameter class object.setValue
    But my problem is that I want the value for the parameters at runtime, for which I intend to use SPEL. But I am not able to use SPEL using the setValue method.
    So it goes like this in short:
    OAAdvancedTableBean.setTableSelection(OASingleSelectionBean)
    OASingleSelectionBean.setPrimaryClientAction(FirePartialAction)
    FirePartialAction.setParameters(Parameter[])
    Parameters.setKey(String)
    Parameters.setValue(String) --- In case of value I want to give SPEL as an argument as I get the value at rutime
    Is that any other way in which I can set the value for the parameters using SPEL?

    Hi,
    I got ur point.
    Although i have never tried.........Can you try using method
    Parameters.setValueBinding(new OADataBoundValueViewObject(<single selectionbean>,<vo attr>))
    In this way without the use of SPEL, you will be able to achieve the functionality!
    Try this and get back to me!
    --Mukul
    Message was edited by:
    Mukul Gupta

  • How does one set databse parameters in Tomcat to run a servlet?

    Hi, I am trying to run a applet-servlet code, downloaded from the web. According to the installation instructions, the following is stated:
    Database Parameters. You can provide different database parameters to the servlet. These parameters are set during the administration of the servlet.
    dbDriver - name of the database driver class name (default = sun.jdbc.odbc.JdbcOdbcDriver)
    dbURL - complete database URL (default = jdbc:odbc:StudentDatabase)
    userid - user id (default = <none>)
    passwd - password (default = <none>)
    I am running TOMCAT on a Windows2000 machine. My question is how to does one set the parameters in TOMCAT. What is the default userid and password for TOMCAT.
    Any help/advise is appreciated in advance. Thanks.Regards.

    May be parameters must be set in web.xml in your war

  • How to set oracle parameters

    Hi all,
    how to set oracle parameters in my sap 4.7 server. I need to know the procedure of parameter tune.
    Regards,.
    satish.
    Edited by: satish k on Jun 17, 2008 5:07 AM

    Hi
    Please try this link.
    http://oracle.basisconsultant.com/oracle_tuning_parameters.htm
    http://www.orafaq.com/wiki/Oracle_database_Performance_Tuning_FAQ
    But before doing this, check for all the probabilities as it requires lots of data and traces to do the parameter tuning.

  • How to Set NLS parameters in SqlDeveloper for current and future connection

    Hi
    I've downloaded sqldeveloper version 1.5.4(build main-5940)
    when I try to set NLS parameters as following it is thrwoing following error
    TOOLS->PREFERENCES->DATABASE-->NLS parameters
    on right side pane
    I've changed
    SORT----->BINARY_CI
    COMP----->LINGUISTIC
    then it is generating following log file
    SEVERE     43     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:ORA-00600: internal error code, arguments: [qctosop:like transform], [], [], [], [], [], [], []
    SEVERE     44     114     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     45     7     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     46     9     oracle.dbtools.db.DBUtil     
    SEVERE     47     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     48     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     49     5     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     50     0     oracle.dbtools.db.DBUtil     
    SEVERE     51     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     52     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     53     5     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     54     0     oracle.dbtools.db.DBUtil     
    SEVERE     55     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     56     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     57     4     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     58     0     oracle.dbtools.db.DBUtil     
    SEVERE     59     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     60     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     61     4     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     62     1     oracle.dbtools.db.DBUtil     
    SEVERE     63     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     64     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     65     5     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     66     0     oracle.dbtools.db.DBUtil     
    SEVERE     67     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     68     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     69     6     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     70     0     oracle.dbtools.db.DBUtil     
    SEVERE     71     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     72     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    please help me to set NLS parameters for current and future connections.
    thanks,
    harry

    Hi -K-
    actually I want to make SqlDeveloper to make case insensitive search.
    when I google, I've found to make oracle as case insensitive I need to set NLS_SORT to Binary_CI and NLS_COMP to LINGUISTIC
    Default SQLDEVELOPER NLSParmeters values are as NLS_SORT---->Binary and NLS_COMP--->Binary
    Now I want to make these as NLS_SORT---->Binary_CI and NLS_COMP--->LINGUISTICS.
    thanks,
    harry

  • How to set single parameters for two tables?

    SELECT GM.GRNNO,GM.GRNDATE,SUM(GS.APPROVED),SM.ISSUENO,SM.ISSUEDATE,GS.ITEMCODE,SUM(SS.ISSUEDQTY)
    FROM IMS_GRNM GM,IMS_GRNS GS, IMS_ISSUEM SM, IMS_ISSUES SS
    WHERE GM.GRNMSERIAL=GS.GRNSSERIAL
    AND SM.ISSUEMSERIAL=SS.ISSUESSERIAL
    AND GM.POSTED='T'
    AND SM.POSTED='T'
    AND GS.ITEMCODE=SS.ITEMCODE
    AND GS.ITEMCODE='01-01-02-019'
    AND *******
    GROUP BY GM.GRNNO,SM.ISSUENO,GM.GRNDATE,SM.ISSUEDATE,
    GS.ITEMCODE ORDER BY GM.GRNDATE,SM.ISSUEDATE;
    ******* here i have to select the data from both the tables between two parameters named :P_1 and :P_2.
    the date column in IMS_GRNM is named as GRNDATE.
    the date column in IMS_ISSUEM is named as ISSUEDATE.
    how to set such parameters???

    I think all you need is
    Where table1.column1 between :p1 and :p2
    and table2.column2 between :p1 and :p2

  • Set archiving parameters on physical standby

    most respected forum members,
    i have two databases both are oracle 9i release 2 on windows server 2003.
    A (this is production database)
    B (i want to make this standby )
    on A (production machine ) i set parameters
    alter system set log_archive_dest_1 = 'location =E:\oracle\archives'
    alter system set log_archive_dest_2 = 'service (tnsnames entry from standby db)
    standby_archive_dest = 'E:\oracle\archives'' (the location is same on standby as it on primary)
    on B (standby db) how i set these parameters.
    plz reply in detail
    regards
    Edited by: user10204771 on Apr 17, 2009 6:57 AM

    hi werner,
    the link u told me , i m following the same doccument.
    here it is chapter 3 creating physical standby db.
    while enable archiving on standby db , here the parameters are
    alter system set log_archive_dest_2 = 'service = (here the tnsnames entry will be from tns of primary db or standby) bcz in primary tnsnames entry is "REPEIMS" and in standby the tnsnames entry "REPSTDY".
    Moreover when i will change my standby db to archivelog mode where i will set that destination
    alter system set log_archive_dest_1 = 'Location (here like this) or some other parameter'
    regards rehan

  • Can not start $./emca, how to set the parameters??????

    Hi All,
    I have Installed Oracle 10g(10.2)(Enterprise Edition) database on HP UX 11.11.
    when I try to run $ ./emca it asks me below parameters to setup.
    where to set these parameters???Why its asking me so many parameters???
    $ ./emca
    /oraback/orahome/oracle/product/10.2.0/db_1/bin/emca [operation] [mode] [dbType] [flags] [parameters]
    -h | h | -help | help: prints this help message
    -version: prints the version
    -config dbcontrol db [-repos (create | recreate)] [-cluster] [-silent] [-backup] [parameters]: configure Database Control for a database
    -config centralAgent (db | asm) [-cluster] [-silent] [parameters]: configure central agent management
    -config all db [-repos (create | recreate)] [-cluster] [-silent] [-backup] [parameters]: configure both Database Control and central agent management
    -deconfig dbcontrol db [-repos drop] [-cluster] [-silent] [parameters]: de-configure Database Control
    -deconfig centralAgent (db | asm) [-cluster] [ -silent] [parameters]: de-configure central agent management
    -deconfig all db [-repos drop] [-cluster] [-silent] [parameters]: de-configure both Database Control and central agent management
    -addInst (db | asm) [-silent] [parameters]: configure EM for a new RAC instance
    -deleteInst (db | asm) [-silent] [parameters]: de-configure EM for a specified RAC instance
    -reconfig ports [-cluster] [parameters]: explicitly reassign Database Control ports
    -reconfig dbcontrol -cluster [-silent] [parameters]: reconfigures RAC Database Control deployment
    -displayConfig dbcontrol -cluster [-silent] [parameters]: displays information about the RAC Database Control configuration
    -upgrade (db | asm | db_asm) [-cluster] [-silent] [parameters]: upgrades an earlier version of the EM configuration to the current version
    -restore (db | asm | db_asm) [-cluster] [-silent] [parameters]: restores the current version of the EM configuration to an earlier version
    Parameters and Options:
    [parameters]: [ -respFile fileName ] [ -paramName paramValue ]*
    db: perform configuration operation for a database (including databases that use ASM)
    asm: perform configuration operation for an ASM-only instance
    db_asm: perform upgrade/restore operation for a database and an ASM instance
    -repos create: create a new Database Control repository
    -repos drop: drop the current Database Control repository
    -repos recreate: drop the current Database Control repository and recreate a new one
    -cluster: perform configuration operation for a RAC database
    -silent: perform configuration operation without prompting for parameters
    -backup: configure automatic backup for a database
    Parameters for single instance databases
    HOST: Database hostname
    SID: Database SID
    PORT: Listener port number
    ORACLE_HOME: Database ORACLE_HOME
    HOST_USER: Host username for automatic backup
    HOST_USER_PWD: Host user password for automatic backup
    BACKUP_SCHEDULE: Automatic backup schedule (HH:MM)
    EMAIL_ADDRESS: Email address for notifications
    MAIL_SERVER_NAME: Outgoing Mail (SMTP) server for notifications
    ASM_OH: ASM ORACLE_HOME
    ASM_SID: ASM SID
    ASM_PORT: ASM port
    ASM_USER_ROLE: ASM user role
    ASM_USER_NAME: ASM username
    ASM_USER_PWD: ASM user password
    SRC_OH: ORACLE_HOME for the database to be upgraded
    DBSNMP_PWD: Password for DBSNMP user
    SYSMAN_PWD: Password for SYSMAN user
    SYS_PWD: Password for SYS user
    DBCONTROL_HTTP_PORT: Database Control HTTP port
    AGENT_PORT: EM agent port
    RMI_PORT: RMI port for Database Control
    JMS_PORT: JMS port for Database Control
    Additional Parameters for cluster databases
    CLUSTER_NAME: Cluster name
    DB_UNIQUE_NAME: Database unique name
    SERVICE_NAME: Service name
    EM_NODE: Database Control node name
    EM_SID_LIST: Agent SID list [comma separated]
    $

    Hi Dashan,
    it depends or in other words what is management server for you? There's a change from 9i to 10g. In 10g we have dbconsole dedicated to one specific database or gridcontrol as centralized monitoring utility for many databases, application servers and so on. If it is standalone console command is 'emctl start dbconsole', this command starts the console itself and the integrated agent. For gridcontrol use 'opmnctl startall' to start all necessary services, these are many as 'opmnctl status' shows.
    Regards
    Werner

Maybe you are looking for

  • Video playback - firewire

    Hi, Does anyone know of a way that I can output my entire display (finder, desktop, etc) via firewire DV? Is there software somewhere that can run in the background and just be duplicating the video display and sending it out to a firewire device? -p

  • I get an error -43 everytime I try to update to iOS 5...

    I have been trying for a year to update from iOS 4.3.5 to 5.0 and every single time i get a error- 43 during backup and get a pop yp thsat tells me I will lose all if I hit OK..

  • Can't log in to Adobe Exchange Plugin

    I installed the new Adobe Exchange plugin but I can't login. It stays cycling on the Logging in... screen on the panel. Anyone else having issues with this? (Windows 7 64 bit, Photoshop CS6 64 bit) It's been stuck for the last 20 min now. I've alread

  • What is a serialized file?

    Hi all! I googled, but I seem to only be able to find out methods involving a serialized file, but I can't find out exactly what it is to start with. Any explanations/links welcome. Thanks!

  • I want to monitor NWCE7.1 by using CCMS in ECC6.0 (NW7.0)

    Hello all, I want to monitor NWCE7.1 by using CCMS in ECC6.0 (Netweaver version is 7.0). I made the file "ccmsconf" , copied NWCE, and tried to config NWCE. But NWCE don't have Visual administrator. I searched configtool menu, but didn't found. Pleas