Set cad indicator for bom?

Hello,
i have the following question in the CAD/CAD-Desktop-environment:
i copied material-bom-data from one plant to another by using batch-input. i didn't notice, that with batch-input the cad indicator cannot be set.
The result is, that i have all bom without this cad-indicator and now it is not possible to work properly with these data in the cad-desktop.
my question is: is it possible to set this field afterwards? Is there a function module to do this (i have'nt found one to CHANGE this field)? Or is it possible to simply set the fields in the database (STKO-CADKZ & STPO-CADPO) without crashing any data references?
Or do i have to delete all the bom an create it again the right way?
Thanks for any help
Sven

Hi Sven,
try the function module BAPI_DOCUMENT_CHANGE2. In the table DOCUMENTSTRUCTURE you can handle document stuctures.
regards Iring

Similar Messages

Cad indicator in BOM header or bom item

Hi All
Cad indicator in bom header or bom item is set only using the CAD interface.The system sets this indicator if the bom header or item is generated in a CAD system and transferred to the SAP System via an interface.
If we upload bom with our upload program then this indicator cannot be set.
Is there is any way by which we can set it for all boms which are uploaded through upload program ?

Hi,
Why would you want to do that? Wouldn't it be incorrect representation?
Regards,
Vivek

Fixing indicator for BOM explosion marked by default

Hello Experts,
I'm in a repetitive manufacturing scenario and I want to know if it is possible to generate planned orders with Fixing indicator for BOM explosion marked by default. Does anybody know if it can be done??

Hello Laura
As far as I know, this is not possible to do using customizing, however, you can do that using BAdI
MD_PLDORD_CHANGE.
Check the following document for more details about the BAdIs available for MRP:
BAdIs for MRP
BR
Caetano

How to set Actual indicator for Business Process

Hi,
Can anybody tell me as "how to set Actual indicator for Business Process " in Activity Based Costing.
Regds,
Bijay

ok

How to set Blocking Indicator for product specific TransportationLanes?

Hi All,
I'm facing a problem while trying to set the blocking indicator for product specific Transportation Lanes-external procurement.
How can i proceed on the same?
I've figured out 2 methods for blocking the product specific TLanes.
1. using /SAPAPO/TR_TL_TRANSFER_BAPI.
2. using BAPI_TRLSRVAPS_SAVEMULTI.
I tried using the BAPI - /SAPAPO/TR_TL_TRANSFER_BAPI, which comes inside the DELETE BAPI - BAPI_TRLSRVAPS_DELMULTI. Although I had passed the parameters reg. external procurement, nothing seemed to be happening in the system. There was no blocking indicator - D(locked and flagged for deletion) set against the subjected TLane. In fact, to my amazement, the BAPI didn't return even a single msg. BAPIRETURN internal table after execution was empty.
Here, I'm passing:
(IV_LOGQS) TYPE /SAPAPO/LOGQS
(IV_LOGSYS) TYPE LOGSYS
(IV_CALLER) TYPE /SAPAPO/MD_CALLER
(IT_TR) TYPE /SAPAPO/TR_TTD_TR
(IT_TR_X) TYPE /SAPAPO/TR_TTX_TR
(IT_TRPROD_SRC) TYPE /SAPAPO/TR_TTD_TRPROD_SRC and
(IT_TRPROD_SRC_X) TYPE /SAPAPO/TR_TTX_TRPROD_SRC
I haven't tried on the second method yet. Is there any other programming alternative for setting the blocking indicator of a TLane / multiple Tlanes?
Could anyone pls explain and guide me on a suitable method to be chosen and the process to be followed, parameters to be passed, etc.

Hi Sanjay,
Use the standard BAPI: BAPI_TRLSRVAPS_SAVEMULTI2 (according to SCM version you are using)
to update the deletion flag for product specific T-lane, in this BAPI you have to pass the data to EXTERNAL_PROCUREMENT parameter table in which LOCKED_FLG field is there in which you can pass the "D" for deletion or block flag.
Also you have to pass the same entries in EXTERNAL_PROCUREMENT_X parameter table of this BAPI.
If any further help required, refer the documentation of BAPI or let me know.
I hope this will help you to solve the issue.
Regards,
Saurabh

Setting up workflow for bom change LO-ECH

Hi all,
I am trying to set up the workflow for BOM change. I have followed the Preparation step for the setup and was stuck at the step 'Define the Organizational Plan for the Change Department (LO-ECH)', step number 6.
<a href="http://">http://help.sap.com/saphelp_46c/helpdata/en/f1/499a34272a5f2ee10000009b38f83b/frameset.htm</a>
5. Select the object type SAP Organizational Object, and click .
The Add SAP Organizational Object screen appears.
6. In the field SAP org. object type, enter one of the following organizational object types:
TCC11
Responsible for changes of this change type (master record)
TCC13
Responsible for object changes of this change type
When I click on either TCC11 or TCC13, it give me the below error message
"Method CREATE not defined for object type Person responsible for changes of this type.
Message no. 5W003"
I have debugged the program and seems like it error out because there is no entries for 'CREATE' in the table SWOTDV for objecttype = 'TCC13' or 'TCC11'
May I know what am I missing here?
Regards
Khong Kiam

But I find if I have as original media - one jpeg still, one 480 x 720 video clip
480x720? Do you mean 720x420? And what CODEC? DV? Some odd whackball one like MPEG-4? Look at COMPRESSOR in the BROWSER in FCP.
Stills you have to render...
and are employing opacity, a filter like Blink,some color correction, etc. That I get minutes to render a 30 second clip.
That is still adding a filter, and opacity..and color correction. That will require rendering.
If you find that you drop a clip onto the timeline, and you instantly need to render, then something is wrong with your settings. You shouldn't have to render clips in the timeline. Not if they are captured or imported PROPERLY, meaning that they are codecs that FCP edits with.
If you want to just grab random clips or use random codecs and throw them all into an application and begin editing, then you should look at another editing application, like Vegas or Adobe Premiere CS5.
Shane

Set Period Indicator for MVER

Where in the IMG or std system do you set the Period Indicator for the consumption posting table MVER?
Currently all movements are posting as Month. I need to change this to Period.

I believe t-codes MM02 Forecasting and MM17 would be used to change the Forecasting period indicator in table MPOP, not the Consumption Usage period indicator in table MVER.
As soon as you perform a real time consumption movement such as peforming MB1A with movement type (GI Cost Center), the total and unplanned consumption are increamented by the transaction quantity immediately in table MVER. The results can be seen in the Material Master MM03 view (Additional Data/Consumption). When it updates the table is considers the period, which mine is currently M (Month). There should be some place I can change this to P (Period).
Thanks for your input

How to Create new Message Control for BOM

Dear Experts,
My question is , we have Set Deletion flag for BOM of some material, When we go to make Production Order. it is showing an warning message , I want to set Error message,instead of warning message . can you all plz tell me how to do it in conflig.
I have tried following settings , but it allows me to change it, but not to create a new message no
IMG, Production, Basic data, Bill of material, General Data, Change Message type
Thank you for your time.

Hi,
For OPJB, execute.
Click on 'New entries'.
Enter version as 000, application area (the first two digits of the message no, for BOM it would be CO I guess), & message no.
Press enter. Under category maintain as E i.e. error.
For SE91, execute.
In message class enter the first two digits of the message, under subobjetcs, enter the message number & clcik on 'where used list icon' in extreme left.
A dialogue box will apeear, select programme & classes. Click on right mark i.e. execute.
A list of programmes will displayed.
Select the relevant programme & clcik on change.
Change the warning into error there. Please note that you need access key & need ABAP consultant to do the same.
Hope this helps you.
SmanS

Release Indicator for Purchase Order

Dear All,
While we set release indicator for release of ourchase order, we select changeble ststus of Purchase Order during release.
As per standard if we set 1 - Not changable and after creation of Purchase Order release indicator set as "Blocked" which is having changable status as "1-Not Changable", then also system allow to change Purchase Order.
Can anybodu suggest solution.

Hi,
I think You are mistaken by terms itself.
well, whn u refer to CHANGEBILITY Indicator , it is only concerned to RELEASE STRATEGY ( applicable to that PO ) which may or may NOT change automatically based on characteristic value changes in PO.
But this changebility indicator doesn't refer to PO Change control.
Pl don't get confused regarding control excercised by this changebility indicator.

To Set Goods Receipt Indicator For Particular Line Items In SRM

Hi All,
i am working on BBP_DOC_CHANGE_BADI in SRM. i am trying to set the goods receipt indicator for particular line items based upon certain conditions. The values are being set in the badi. But when the Purchase Order is created in the backend R/3 i coudn't able to find the goods receipt indiactor being set..
i used this field to set the GR indicator
GR_IND = 'X'. " Goods Receipt Indicator
Can anyone help me in this?
helpfull answers will be rewarded....
Thanks,
Murali

To Murali and Christophe,
I have set the GR and GR non val indicator in CREATE_PO BADI but I face the following situation :
problem -
In case of multiple account assignment in the shopping cart, the R/3 transaction ME21N sets these flags.
The flag status determined as per EBP conditions is lost.
I need to retain the flag status as per EBP conditions even in this multiple account assignment scenario.
proposed solution -
- CREATE PO badi is already implemented in EBP and customised logic for GR and GR non valflag is in place.
- I create user exit in R/3 backend system in ME21N transaction
- I make RFC call in this user exit to EBP and check the table BBP_PDPSET for the shopping cart.
This is how I get the flag status as per EBP conditions and copy the same to R/3 thereby overriding the multiple account assignment check of the R/3 system.
issue -
When I tried to verify that I can check the BBP_PDPSET table from R/3, I found that this table is not having entries for all the records in CRMD_ORDERADM_I table.
For which shopping carts will the BBP_PDPSET table not be populated ?
thank you in advance,
Bhakti.

Delivery completed indicator for STO cannot be set!

Dear colleagues,
There are number of STO’s those goods issue quantity > quantity of goods received. Because of this delivery completed indicator cannot be set due to message “06 848 - Delivery completed indicator cannot be set for item XXXXX”.
There is an OSS note (167795) that allows to set delivery completed indicator for such purchase orders. Even though our SAP release is 6.04, report RM06EV70 does not exist (yet BADI ME_ARCHIVE_ACTIVE is active) in the system and OSS note cannot be implemented.
Any help would be appreciated.
Regards,
Melih
PS. Please do not provide answers like “the goods receipt must be first posted via the entire goods issue quantity; then you can post a scrapping via the shortfall quantity” since there are backdated STO’s.

Hi,
Find STO created for which plant in t.code:ME23N and check MRP parameter maintained for that plant in t.code:OPPQ( also check entry of that plant in t.code: OMCD).
Also cross check which Field Selection Key assigned to your STO PO document type and check “Delivery completed" indicator” available as Optional entry in GR/IR control segment in your Field Selection Key.
SPRO - > MM - > Purchasing -> Define Screen Layout at Document Level
Regards,
Biju K

Setting deletion indicator/Flag for an operation in production order

Dear All, Hi
How to set deletion indicator/flag for an operation in a production order. I don't want to delete the operation as such. Please help & suggest.
Ragards,
Shaiz

Hi Shaiz,
I hope the requirement is just like you posted earlier as in case of component deletion.
Here in this case also the behaviour of the order remains the same.
So you can go for release the order as soon as the order gets created, your both the requirements can be fullfilled.
Also you havn't provided the exact feedback on the solutions offered by all of us, on your last query.
Request you to give detailed input on the same.
Hope thish helps you.
SmanS

User exit for setting tax indicator in Sale order

Hi All,
I want to know if there is a way (user exit) that could look at the Sales Order Type , particular Item Pricing Condition and Ship-to party State and set the materialu2019s tax classification (VBAP/TAXM1) to u201C0u201D (Exempt) ?
Thanks in Advance!
Sonali.

Hi Ramesh,
I have put the code in the user exit, and I am able to set the tax classification indicator but I have a problem... Before setting the indicator I need to check for the Usage code of the line item (This code I am using instead of checking the Pricing condition) . I am able to read all the values of line item in VBAP structure in the user exit except for the first time this user exit is hit as soon as a line item is entered it is not picking up the Usage code. That field is blank.
But if add another line item and go into the user exit I can see the previous line item Usage code in XVBPA table.
Do you have any idea why usage code is missing in VBAP structure in the user exit or is there any other table or structure where I can get the usage code?
Thanks in Advance!
Sonali.

Avoid automatic creation of purchase requisition for bom item N

Dear.
When I create a production order , for the components with bom item N the system create a purchase requisition. I need to avoid this automatic creation , do you know a solution to obtain this ?
Thanks.

For the many people that have asked this question.
N item category in the BOM is always going to propose direct procurement. Through configuration I have not found a way to make it go away from the planned order. You can make it go away from the production order.
The IMG path:
Plant Maintenance and Customer Service
-> Maintenance and Service Processing
--> Maintenance and Service Orders
---> Functions and Settings for Order Types
----> Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
Under the Res/PurRq -> Specify Never
In order make this setting effective, you must define the following
system message to error or warning, as it is stated on note 569984
Version Appl.A. No. Cat
00000000 C2 280 W
Please note that this setting is effective for reservations and
requisitions.
The best solution is to use BOM item category L with the bulk indicator set. You will not get any direct procurement proposals or planned orders and you can use long term planning to see the time phased MRP results.

Best Practice for Buy in Set and Dismantle for Sales

Hi All SAP Masters,
We have a scenario that when purchasing an item as "set", in this set, it has a few components inside this set (something like a material BOM). Example, a machine which comes with several parts. However, when the user received this set from the supplier, the user would further dismantle certain part(s) from the set/"machine" and sell it separately to the customer as a component/"single item".
What is the best practice in the SAP process to be adopted?
Please help. Thank you.
Warmest Regards,
Edwin

If your client have PP module , then follow this steps
Consider A is the purchased material and going to dismantle the A into B, and C
1) create a BOM for B material
and assign the header material A as consumption material with + ve qty
and C component as byproduct and maintain - ve qty in BOM
2) maintain backflush indicator for A & C in material master MRP2 view
3) create routing for B and maintain auto GR for final operation
4) create a production order for B
5) confirm the order in Co11n, A will be consumed in 261 movement, C will be receipt with 531 movement
B will receipt in 101 movement .
once the stock is posted into unrestricted you can sale B & C

Set cad indicator for bom?

Similar Messages

Maybe you are looking for