Set defaults for table wizard?

Is there a way to set defaults when adding a table in contributor?
I think some of the defaults are set to:
Border Size = 1
Width = 200 pixels
For example, we would like the defaults:
Border Size = ""
Width = ""

I think you can set the default time for a transition. Go to Edit/Preferences/General.
But whether or not your transition will center at the cut depends on the characteristics of your clips.
As I explain in my book, transitions need to borrow about half a second of material from beyond the out point of one clip and the in point of the other to create the transitional segment. If one clip has that extra footage and the other does not, the transition will favor the clip with the transitional material unless you force it otherwise.
And, during slideshows, transitions will often rest off-center by default.

Similar Messages

  • Process open items: how to set defaults for the additional selections

    Hi FI experts,
    Can anyone tell me if it is possible to set defaults for the additional selections in the processing of open items.
    I am using transaction F-04 (or F-06 or F-07) to post with clearing.
    When processing the open items I can use additional selection parameters. In my case I need to use the document type.  I would like to save this selection as a default but this doesn't seem to be possible.
    1. it is not possible to save a variant for the processing of open items
    2. I can not create a variant transaction (with trx. SHD0) for F-0x since this is only possible for dialog transactions
    Do you see another way to store defaults for the additional selections in open item processing?
    Thanks a lot.
    Dimitri

    Hi,
    When you create a transaction variant from FB05, then also you will not able to default the value for additional selections variable.  Hence SHD0 is not going to help.
    As said above, either you can change the additional selection screen parameters, but here again you can't default the value.  You can only reduce the number of entries on the screen.
    Else you can create a custom transaction code by copying the standard.  Even SAP recommends to create custom codes from standard tcode for clearing purposes depending on requirements. 
    Please check this link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/37b8e7455b11d182b40000e829fbfe/frameset.htm
    In the above link, in navigation choose clearing -- Specifications for processing open items
    If it is a custom transaction then you can default document number.
    Regards,
    Ravi

  • Setting defaults for text tool in CC Acrobat Pro

    I am running the latest version of XI Acrobat Pro for Mac .
    I can set defaults for everything except the text typing tool.
    Can anyone help?
    Thanks very much!

    I am trying to select it, but the moment I let go of the left mouse button it disappears.

  • In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?

    Adobe Acrobat 9 Pro V9.4.0
    Win7 Pro x64
    Problem: In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?
    Every time Acrobat scans a document, I have to go to Initial View to set Navigation tab, Page layout, and Magnification. It does not remember the settings I last used.
    Thanks in advance.

    See my response to this post

  • How to set optional for table structure in functiona module

    hi experts,
    as i have small doubt regarding
    while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure ....
    reagrds prabhanjan

    Ignoring the TABLES/CHANGING/EXPORTING argument...
    while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure
    Why not?  There's no issue with marking a TABLES interface parameter with 'Optional' and publishing the function module or function group as a web service...

  • Set defaults for contacts

    HI,
    Can anyone tell me how to set the defaults for the contacts.  Right now when I save a number in the contacts it is automatically set as a "work" number.  I want it to automatically be a mobile number.  This will save a lot of cut and pasting.  Thanks.

    20-Oct-2008 12:07 AM
    orgazmic wrote:
    Generally pleased with my new N96 which replaces my ageing N95 but i have noticed two bugs. I am using a simfree, nokia shop purchased N96 update to SW v11.101.098.1.
    BUG 1: I've imported my contacts from my N95 and i cannot set defaults for email addresses or numbers. When the defaults option is selected from the menu in contacts the conacts application immediatley closes and i am returned to the front screen. Defaults for contacts i've created on the N96 can have there defaults set but defaults cannot be set for contacts imported using PC Suite or the phones sync utility. Also, for imported contacts the ringtone is the default nokia tune and not the tone defined in the contact or in my active profile. Again only imported contacts show this glitch with a contact created on the N96 working as expected. The default ringtone issue seems to be a common one on the forum maybe this is a connection.
    BUG 2: The phone freezes if you try to resume playback of a video file whilst using a bluetooth headset (in my case a nokia BH-500). With the phone connected to the BH-500 you can play a video file from the start but when promted to continue the latest played file from last position its 'take the battery out time' when the phone locks up.
    Any user got any thoughts on these anomolies??
    Message Edited by orgazmic on 20-Oct-2008 12:13 AM
    Hello, i have the 11.101 version and I imported all my contacts via PC suite and I CAN use the defaults option and the ringtone can be anything I want (apart for video ringtones-they don't work).
    N95,N81,N96, N97

  • Setting Defaults for Essbase 6.1

    How do you set defaults for the options/global/mouse-actions?Presently, we have to disable the mouse-actions every time we enter Excel. Essbase is overwriting the mouse-actions with Essbase functions every time we enter Excel (it does not save our changes when we exit Excel). We have also tried to work in Essbase with the preferred default settings but this has not helped either.

    Is your Essbase.ini file read-only? (or the windows directory where it is located read-only?) Tim TowApplied OLAP, Inc

  • Oracle BI EE Answers Defaults for Tables etc

    Hi Together,
    I'd like to know how to configure the defaults for the following parameters.
    The most importent parameters for me are the default size for the tables with fixed headers and fixed rows (fixed headers and scrolling content).
    I'm able to set these paremeters on each new analysis:
    Table Properties | Style | Maximum Width
    Table Properties | Style | Maximum Height
    In addition to that I like to know how to change the defaults for  the following parameters:
    Analysis Properties | Interactions | All Interactions
    Analysis Properties | Interactions |Drill(when not a primary interaction)
    Analysis Properties | Interactions |Move Columns
    Analysis Properties | Interactions |Sort Columns
    Analysis Properties | Interactions |Add/Remove Values
    Analysis Properties | Interactions |Create/Edit/Remove Groups
    Analysis Properties | Interactions |Create/Edit/Remove Calculated Items   
    Analysis Properties | Interactions |Display/Hide Sub-totals
    Analysis Properties | Interactions |Display/Hide Running Sum
    Analysis Properties | Interactions |Include/Exclude Columns
    Analysis Properties | Interactions |Hide Columns
    Regards
    Stefan

    Hi Gopal,
    The following calculation gives you the minutes between <datetime_column1> and SYSDATE: TIMESTAMPDIFF( SQL_TSI_MINUTE , <datetime_column1>, VALUEOF("CURRENT_DATE"))
    Good Luck,
    Daan Bakboord

  • Setting defaults for reminders in iCal

    Is it possible to set a default for reminder in iCal? I would like to set it at e-mail the day before. However, iCal seems to have a reminder default as an alert (which is simply a pop-up), not  e-mail. For every event I creat in iCal, I am having to manually put in the e-mail 1 day before. It doesn't remember the number of days either, because when I choose e-mail, it automatically displays 15 days. I know there's got to be some way to fix this. Any help will be appreciated.
    Thanks.
    Subbu44

    thats what we've been doing. Problem is its gets a bit tedious when you have to constantly go through this process (and it involves a few clicks to do so) each time you open a file or place an image.  The usual default is for files to be listed by name so we are not sure how or why all of a sudden it now defaults to "last modified" each time one of these menus is opened. And the defaults are fine ie. files are listed by name when opening folders outside of indesign... its only through indesign that they have reveted to "last modified"..... 

  • How to set default for ddlb in pcui?

    Hi guys,
    I wrote some coding in FILL_DROPDOWN_LISTBOX method, and right now I want to set default value for my ddlb field. Anyone have experience for this?

    Hi Shen,
    Create first domain for your DDLB field and when you assign this filed in field grp structure select the checkbox for " Domain values".  So that you can see the default values in PCUI screen when launching the page.
    Ex  field name -  suffix            ( Create domain for this field and assign values like Mr.Mrs)
          Field type  - Dropdownlist box
          check box -  Domain Vals 
    Regards
    Raju.

  • Set defaults for voice/no effects/no metronome

    Is there a way to set GB so it defaults to open new songs as Voice/no effects and no metronome? This is what I mostly use and it would be nice to not have to make these changes every time.
    Thanks

    thanks, the template idea will save time.
    Indeed, I have one set up with 8 tracks for doing our initial drum recordings. It has all the icons set, all the channels set, metronome is of...
    It shaves a LOT of time getting things set up for our recordings. Enjoy.

  • Set default for iPhoto export

    How can I set the default for exporting photos from iPhoto to Desktop instead of the Pictures folder?

    Not with iPhoto 11 and 10.7
    For years I have used this system enhancement for these sorts of issues in every app:
    http://www.stclairsoft.com/DefaultFolderX/
    No connection with the makers, just a happy customer...
    Regards
    TD

  • Set default for all controls

    How do I set a default for all controls?
    For example, I want the label to always appear on the left.  Instead of setting the control attribute for each LED separately, I'd rather set a default to be applied to all LEDs.
    I'd prefer to do this programmatically.
    Thanks!!!

    Hi,
    one possibility is to use the function call SetAttributeForCtrls from the programmer's toolbox library.
    Another, to generate the controls programmatically - if you are using your own functions to do so you can define the default as to your liking.
    Wolfgang

  • Setting defaults for Compound Layout View in Answers

    Hi All,
    I need to change the default views in Answers from Title-Table View into 'Title-PivotView'. I have gone through the guide and created an xml file New.xml with the code,
    <?xml version="1.0" encoding="utf-8"?>
    <WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
    <WebMessageTable system="Answers" table="ViewDefaults">
    <WebMessage name="kuiCriteriaDefaultViewElements" translate="no">
    <HTML>
    <view signature="compoundView" />
    <cv signature="pivotTableView" />
    <cv signature="titleView" />
    </HTML>
    </WebMessage>
    </WebMessageTable>
    </WebMessageTables>
    and I have placed this file under C:\OracleBI\web\msgdb\customMessages and also C:\OracleBI\web\msgdb\l_en.
    I restarted the services too,but I cant view the changes.
    Am I missing anything !
    Any ideas.
    Thanks,
    Princy
    Edited by: user13049743 on Aug 30, 2010 12:07 PM

    hi,
    yes you have to do that also ,its a documentation bug
    The method is given in the bookshelf. But unfortunately it does not work as specified due to a documentation bug. In order to make this work, go to >{OracleBI}\web\msgdb\messages folder and you would find a file called answerstemplates.xml. Copy this file to {OracleBIData}\web\msgdb\customMessages. If >you dont have this folder then create it. Now edit this file and search for kuiCriteriaDefaultViewElements.thanks,
    Saichand.v

  • How to set default for "Horizontal / Vertical Alignment"?

    Hi,
    is there somewhere a setting to change the default of the "Horizontal / Vertical Alignment" property for an item label? I don't like the "Right" alignment and I have to change it each time when I create a new item.
    Thanks
    Patrick
    http://inside-apex.blogspot.com

    Yes, this is one of (many) cases where a Bulk edit feature in the Builder would be very useful. There have been some discussions about this and hopefully the APEX team is considering these for the next release.
    Having said that, I frequently find myself taking a full app export and editing the SQL file in my favorite text editor (Vim) and making these little changes.
    This is NOT to be done lightly, see the caveats and disclaimers at Re: htmldb application Disabled(on updation of FLOWS_020000.WWV_FLOW_STEP_I
    As always, take a backup of the file before modifying it and save it so you can revert back to it if something goes wrong.

Maybe you are looking for