Set tablespace for index in OWB

It is Monday and I must just be missing where you can set the tablespace for an index in OWB 11gr1

Hi,
in table Configuration properties (under Indexes section) you can set tablespace for each table index
Regards,
Oleg

Similar Messages

Separate tablespaces for indexes and LOBs

I have modeled my db tables with jDeveloper. Now I would like to store my tables in default tables, my indexes in a separate tablespace, and LOBs in a 3rd tablespace.
How can I best add the tablespace definitions to the table creation sql? I can't find such functionality in jDeveloper.
If jDev does not support this, does Oracle have some other tools which could do this?
Or can I set some ALTER SESSION parameter before creating the tables which would make my indexes and LOBs go to the correct tablespaces by default?

I see jDeveloper 11g has a possibility for specifying tablespaces for the tables and LOBs.
I cant figure out how to set tablespaces for indexes though. I can tell there is definately no way to set tablespace settings for primary key / foreign key indexes.
So jDev 11g does not seem to solve my problem either.

Amount of temporary tablespace size used for index rebuild

Hi All,
I want to know approximate amount of temporary tablespace size used for index rebuild. I need this information to avoid the insufficient temporary tablespace error during the huge index rebuild.
Is there a query or procedure to find it out.
Thank you.

Hi,
While creating the index, the temporary segment is created in the permanent tablespace. So permanent tablespace must have sufficient space.
http://www.oracle-base.com/articles/10g/SpaceObjectTransactionManagement10g.php
http://aprakash.wordpress.com/2010/01/05/numeric-segment-name/
Anand

How to set only one Index-group for a Search-iView as default?

Hi Everybody,
i have a lot of index ID's for searching in different folders. Is it possible to set only one index-group as default for a search iView? Until now i get all groups as default in every search. It's inconvenient for the users to use the link of 'show options' in order to uncheck the other index ID's.
regards,
Seed
Edited by: seed_mopo on Jun 6, 2008 5:02 PM

hi Seed,
To achieve this you have to follow the below steps
1. Create a new set of search options, choose System Administration -> System Configuration -> Knowledge Management -> Content Management -> User Interface -> Search -> Search Options Set in the portal.
In that you have a field 'Index Groups', wherein you can specify which index group, the user has to search in. If there are multiple index groups, mention your index groups separated by comma.
See here for more information
http://help.sap.com/saphelp_nw04/helpdata/en/cc/f4e77ddef1244380b06fee5f8b892a/content.htm
2. You have to specify the option set that you created in step 1 in the default KM search iview. In the iview properties, under the field search option set, mention the option set that was created for this index group or multiple index groups.
This way, you can configure KM search iview to search in a single index group or multiple index groups.
Revert back in case of any queries
Regards,
Ganesh N

Informix: Error while trying to set up start or end key for index read

Hi all
Im moving an application from weblogic 6.1 to 8.1, we're using informix as our databasemanager and are using informix's XA driver. However im running into the following error:
SQL State: IX000, Exception: java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release],
SQL ErrorCode: -9847, Error Message: [Internal] Error while trying to set up start or end key for index read [fmstopset_release], RSAM ErrorCode: -101
...while accessing a table.
The same code runs fine twice, but the third and following times it fails with the above error code. I've tried setting the various XA flags available in the weblogic console but with no success so far.
Anyone have any input to this problem? Ive not seen many postings about this error out in the cyberspace and the fews ive seen never gets any response...so i just have to hope anyone in here know anything about it.
Best regards
JM

Ulf Akerberg wrote:
Hello
I managed to work around my problem by setting the "statement cache size" in the jdbc connection pool to 0. At least that seems to be a work around, im not fully happy with it.
I attach the stack trace from the exception, perhaps it will give someone an idea.
Btw, we're using sun.jdbc.rowset.ExtendedCachedRowSet to populate the resultset to a "disconnected resultset" which the application works with instead of the resultset. Any statements and resultsets that are created are closed before returning the ExtendedCachedRowSet to the application.
If the application works when statement caching is turned off, then it implies a bug in the
informix driver to do with re-using a prepared statement. Is the PreparedStatement used
the same way each time? (the one at AbstractDAO.java:166) What I mean to ask is, If/when
this statement is created with a given SQL string, are the parameters for that SQL always
set the same way?
thanks,
Joe
>
2004-09-10 15:45:05,603 ERROR [ExecuteThread: '14' for queue: 'weblogic.kernel.Default'] - SQLException: Generic SQL failed:
SELECT d.*,dt.dokument_typ FROM dokument d, OUTER dokument_typ dt WHERE d.dok_typ_id = dt.dok_typ_id AND d.dokument_id = ? ( 0:894),
SQL State: IX000, Exception: java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release],
SQL ErrorCode: -9847, Error Message: [Internal] Error while trying to set up start or end key for index read [fmstopset_release], RSAM ErrorCode: -101
java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release]
     at com.informix.jdbc.IfxSqli.addException(IfxSqli.java:3105)
     at com.informix.jdbc.IfxSqli.receiveError(IfxSqli.java:3419)
     at com.informix.jdbc.IfxSqli.dispatchMsg(IfxSqli.java:2282)
     at com.informix.jdbcx.IfxXASqli.receiveMessage(IfxXASqli.java:119)
     at com.informix.jdbc.IfxSqli.sendStatementQuery(IfxSqli.java:1464)
     at com.informix.jdbc.IfxSqli.executeStatementQuery(IfxSqli.java:1403)
     at com.informix.jdbc.IfxSqli.executeStatementQuery(IfxSqli.java:1333)
     at com.informix.jdbc.IfxResultSet.executeQuery(IfxResultSet.java:223)
     at com.informix.jdbc.IfxStatement.executeQueryImpl(IfxStatement.java:843)
     at com.informix.jdbc.IfxPreparedStatement.executeQuery(IfxPreparedStatement.java:244)
     at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:80)
     at infrastructure.dao.AbstractDAO.genericSqlRead(AbstractDAO.java:166)
     at se.migrationsverket.dhs.domain.dao.DokumentDAO.findByDokId(DokumentDAO.java:64)
     at se.migrationsverket.dhs.domain.dao.DokumentDAO.findByDokId(DokumentDAO.java:43)
     at se.migrationsverket.dhs.generator.impl.pipeline.LoadDocumentPipeline.buildMultiDocument(LoadDocumentPipeline.java:99)
     at se.migrationsverket.dhs.generator.impl.pipeline.LoadDocumentPipeline.process(LoadDocumentPipeline.java:53)
     at se.migrationsverket.dhs.generator.impl.DHSDocumentGenerator.loadDocument(DHSDocumentGenerator.java:63)
     at se.migrationsverket.dhs.generator.DocumentGeneratorInternalHelper.loadDocument(DocumentGeneratorInternalHelper.java:129)
     at se.migrationsverket.dhs.services.document.internal.InternalDocumentManagerBean.loadDocument(InternalDocumentManagerBean.java:185)
     at se.migrationsverket.dhs.services.document.internal.InternalDocumentManager_6sz7e8_EOImpl.loadDocument(InternalDocumentManager_6sz7e8_EOImpl.java:532)
     at se.migrationsverket.dhs.action.documentgenerator.GeneratorAction.load(GeneratorAction.java:147)
     at se.migrationsverket.dhs.action.documentgenerator.GeneratorAction.perform(GeneratorAction.java:49)
     at se.migrationsverket.dhs.servlet.AbstractController.doPost(AbstractController.java:84)
     at se.migrationsverket.dhs.servlet.AbstractController.doGet(AbstractController.java:54)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Regards
JM

Import dumpfile with seperate tablespaces for table and index

Hi,
We have a schema for which the its tables are stored in seperate tablespace and indexes are stored in different tablespace. Now we have take full schema export. Now we want to import it on another schema. Now I want to know if the we have difference in the tablespace name we use REMAP_TABLESPACE clause of the impdp command but what about the seperate tablespace for table and indexes. How would Oracle handle this.
Regards,
Abbasi

Hi,
I hope you created the same tablespace structure on the target side if not so remap_tablespace option you have to use for specifying different tablespaces.Oracle will take care of putting data and index.Any how if a index is moved from one tablespace to other you have to rebuild them,once you rebuild them than only stattistics are gathered otherwise you
might face some performance issue.
Better option is to keep same tablespace structures in source and target environment.
Best regards,
Rafi.
http://rafioracledba.blogspot.com
Edited by: Rafi (Oracle DBA) on May 9, 2011 7:07 AM

In weblogic server when I Setting Up a User and Tablespace for the Server M

In weblogic server when I Setting Up a User and Tablespace for the Server Migration Leasing Table in Sql Plus I got an error. ORA-00972: identifier is too long

Refer: How to: Grant User Access to a Report Server (Report Manager), but this gives a step-by-step procedure for
adding users who are a part of the Domain. In your case you are trying to add users who are not a part of the domain, meaning, you are trying to create users only specific to Reporting Services, am I right?
But Reporting Services either relies on AD to authenticate the users, or you can create a custom-authentication extension to authenticate the users.
In your case, you might need use a custom security extension, and use that to create/delete/modify users. Check the Forms authentication Sample here:
http://msftrsprodsamples.codeplex.com/wikipage?title=SS2008%21Security%20Extension%20Sample&referringTitle=Home
Other references:
Implementing a Security Extension
How to: Configure Custom or Forms Authentication in Reporting Services
Hope this helps
Chaitanya( Twitter |
Blogs )
Any documentation bug? Tell us about it at
Connect. Please feel free to add any community comments in any of the MSDN/technet articles.
This posting is provided "AS IS" with no warranties, and confers no rights.
The next CTP for SQL Server Code Name "Denali" is coming soon.
Sign up now to be notified of the next CTP release.

Set tablespace free space (mb) for a single large tablespace?

It seems that in EM, setting the free space (mb) for locally managed tablespaces affects all of my locally managed tablespaces in the database and not just one.
I clicked on Tablespace, Edit (button), Thresholds and set the Free Space (MB) Warning and Critical. I thought I was setting it for a particular tablespace (because I chose Edit on a single tablespace). But then I got alerts from much smaller tablespaces because those tablespaces had much smaller MB than the thresholds that I just set.
Using EM GC, is there a way to set the free space (mb) to alert for a single large tablespace where defining a critical free space mb is better than setting a free space percent?

ok, go to the database you want to manage.
Then click on Metric and Policy Settings (link at the very bottom).
Scroll down to the 'Tablespace Space Used (%)' metric, and click on the edit button
Now, click on the 'add' button to setup settings for individual tablespaces.
Bazza

Set generate flag to false for index, but index will still be created

I found that the generate flag for index will now be stored correct, even I close and reopen th ephysical model.
However, even i set the generate flag for an index to false, the DDL for the index will be generated. Any workaround?
Additional hint:
* The flag is considered if no physical model is opened.
* To not open the physical model is no workaround because if the physical model is not opened, no sequences will be generated.
Thanks in advance,
Frank
3.0.0.665 on Windows XP
Edited by: puchtec on 16.02.2011 05:55

Hi David,
thanks for your answer. However, I do not see that this is a practicable workaround for me.
Let me explain.
* I have table A with a foreign key on column X to table B.
* I have set that data modeler should create missing indexes for foreign keys (preference/data modeler: automatic index generation for foreign key constraints enabled)
* If I generate DDL, I will get the missing index generated by data modeler (index name ends with FKX). That's fine.
* But, now I have a combined index of column X and column Y on table a. this index would make the automatically generated index needless - because it is already covered by the combined index.
* To avoid generating the needless index, I design an index on column X and set the flag for generation to false.
* If I have designed the index on column X, data modeler does not generate the missing index. However, the needless index will be generated even the flag is set to false.
Of course I can exclude the index from the generation in the generations dialog, but from my point of view I already decided not to generate the index in the relational model. In case the physical model has not been opened, the indexes having generate equals to false are excluded from the generation (could also be seen in generation dialog).
Cheers,
Frank

Creating an index: it's not possible to select a tablespace for the index

Hi,
we are using SQL-Developer Version 3.0.04.
When creating an index it's not possible to select a tablespace for the index. The only choice which is offered by SQL-Developer is <DEFAULT>.
The user itself has privileges on several other tablespaces - and therefore not just only on the default tablespace of the user.
Any help will be appreciated
Rgds
JH

Hi JH,
Well, the capability is somewhat buried in the UI, but it is there.
In the Create Index dialog ...
1. Tick the "Advanced" check-box in the upper right-hand corner.
2. Select "Properties" from the left-hand list (Definition, Properties, Partitions, DDL).
3. Click the Storage Options... button
4. Use the drop-down list to select the desired tablespace.
Return to (2.) and select DDL to see that your tablespace choice is present.
Regards,
Gary
SQL Developer Team
Edited by: Gary Graham on Mar 7, 2012 5:06 PM
And if all you see in the drop-down list is <DEFAULT>, then I would suggest rechecking the user's privileges. Or provide more details about your environment: OS / Database / JDK version, and so on.

Main tablespace for products in 11.5.10.2????????

Hai,
i am registering new product using with adsplice in 11.5.10.2 environment.
in newproducts.txt
product=ego
base_product_top=*APPL_TOP*
oracle_schema=ego
sizing_factor=100
main_tspace=?????????/
index_tspace=????????
temp_tspace=?????
default_tspace=??????
what wew ill mention for main_tspce????????? simlirly to index and default also.
Regards
dba

It is recommended not to have autoextend on for any tablespace as it will be difficult to manage datafiles that grow very large. Example if your datafile are very big in size then while doing an image copy of the files if you get any copy error in between then you have to start the copy from beginning. But if the files were small and you were doing a copy and after few files you get the copy error then you can continue from the last failed file onwards. Another example is if you don't have chunk of small disks to store your image copy backupsets then small files will fit on those disks. Recommended size of the file is maximum 8 to 10GB.
Also set Tablespace%userd metrics warning and critical threshold values so that you get an alert once a tablespace reaches that threshold.

Index issue with or and between when we set one partition index to unusable

Need to understand why optimizer unable to use index in case of "OR" whenn we set one partition index to unusable, the same query with between uses index.
“OR” condition fetch less data comparing to “BETWEEN” still oracle optimizer unable to use indexes in case of “OR”
1. Created local index on partitioned table
2. ndex partition t_dec_2009 set to unusable
-- Partitioned local Index behavior with “OR” and with “BETWEEN”
SQL> CREATE TABLE t (
2    id NUMBER NOT NULL,
3    d DATE NOT NULL,
4    n NUMBER NOT NULL,
5    pad VARCHAR2(4000) NOT NULL
6 )
7 PARTITION BY RANGE (d) (
8    PARTITION t_jan_2009 VALUES LESS THAN (to_date('2009-02-01','yyyy-mm-dd')),
9    PARTITION t_feb_2009 VALUES LESS THAN (to_date('2009-03-01','yyyy-mm-dd')),
10    PARTITION t_mar_2009 VALUES LESS THAN (to_date('2009-04-01','yyyy-mm-dd')),
11    PARTITION t_apr_2009 VALUES LESS THAN (to_date('2009-05-01','yyyy-mm-dd')),
12    PARTITION t_may_2009 VALUES LESS THAN (to_date('2009-06-01','yyyy-mm-dd')),
13    PARTITION t_jun_2009 VALUES LESS THAN (to_date('2009-07-01','yyyy-mm-dd')),
14    PARTITION t_jul_2009 VALUES LESS THAN (to_date('2009-08-01','yyyy-mm-dd')),
15    PARTITION t_aug_2009 VALUES LESS THAN (to_date('2009-09-01','yyyy-mm-dd')),
16    PARTITION t_sep_2009 VALUES LESS THAN (to_date('2009-10-01','yyyy-mm-dd')),
17    PARTITION t_oct_2009 VALUES LESS THAN (to_date('2009-11-01','yyyy-mm-dd')),
18    PARTITION t_nov_2009 VALUES LESS THAN (to_date('2009-12-01','yyyy-mm-dd')),
19    PARTITION t_dec_2009 VALUES LESS THAN (to_date('2010-01-01','yyyy-mm-dd'))
20 );
SQL> INSERT INTO t
2 SELECT rownum, to_date('2009-01-01','yyyy-mm-dd')+rownum/274, mod(rownum,11), rpad('*',100,'*')
3 FROM dual
4 CONNECT BY level <= 100000;
SQL> CREATE INDEX i ON t (d) LOCAL;
SQL> execute dbms_stats.gather_table_stats(user,'T')
-- Mark partition t_dec_2009 to unusable:
SQL> ALTER INDEX i MODIFY PARTITION t_dec_2009 UNUSABLE;
--- Let’s check whether the usable index partition can be used to apply a restriction: BETWEEN
SQL> SELECT count(d)
    FROM t
    WHERE d BETWEEN to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss')
                AND to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss');
SQL> SELECT * FROM table(dbms_xplan.display_cursor(format=>'basic +partition'));
| Id | Operation               | Name | Pstart| Pstop |
|   0 | SELECT STATEMENT        |      |       |       |
|   1 | SORT AGGREGATE         |      |       |       |
|   2 |   PARTITION RANGE SINGLE|      |    12 |    12 |
|   3 |    INDEX RANGE SCAN     | I    |    12 |    12 |
--- Let’s check whether the usable index partition can be used to apply a restriction: OR
SQL> SELECT count(d)
    FROM t
    WHERE
    (d >= to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-01-01 23:59:59','yyyy-mm-dd hh24:mi:ss'))
    or
    (d >= to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-02-02 02:00:00','yyyy-mm-dd hh24:mi:ss'))
SQL> SELECT * FROM table(dbms_xplan.display_cursor(format=>'basic +partition'));
| Id | Operation           | Name | Pstart| Pstop |
|   0 | SELECT STATEMENT    |      |       |       |
|   1 | SORT AGGREGATE     |      |       |       |
|   2 |   PARTITION RANGE OR|      |KEY(OR)|KEY(OR)|
|   3 |    TABLE ACCESS FULL| T    |KEY(OR)|KEY(OR)|
----------------------------------------------------“OR” condition fetch less data comparing to “BETWEEN” still oracle optimizer unable to use indexes in case of “OR”
Regards,
Sachin B.

Hi,
What is your database version????
I ran the same test and optimizer was able to pick the index for both the queries.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL>
SQL> set autotrace traceonly exp
SQL>
SQL>
SQL> SELECT count(d)
2 FROM t
3 WHERE d BETWEEN to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss')
4              AND to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss');
Execution Plan
Plan hash value: 2381380216
| Id | Operation                 | Name | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT          |      |     1 |     8 |    25   (0)| 00:00:01 |       |       |
|   1 | SORT AGGREGATE           |      |     1 |     8 |            |          |       |       |
|   2 |   PARTITION RANGE ITERATOR|      | 8520 | 68160 |    25   (0)| 00:00:01 |     1 |     2 |
|* 3 |    INDEX RANGE SCAN       | I    | 8520 | 68160 |    25   (0)| 00:00:01 |     1 |     2 |
Predicate Information (identified by operation id):
   3 - access("D">=TO_DATE(' 2009-01-01 23:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
              "D"<=TO_DATE(' 2009-02-02 01:00:00', 'syyyy-mm-dd hh24:mi:ss'))
SQL> SELECT count(d)
2 FROM t
3 WHERE
4 (
5 (d >= to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-01-01 23:59:59','yyyy-mm-dd hh24:mi:ss'
6 or
7 (d >= to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-02-02 02:00:00','yyyy-mm-dd hh24:mi:ss'
8 );
Execution Plan
Plan hash value: 3795917108
| Id | Operation                | Name | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT         |      |     1 |     8 |     4   (0)| 00:00:01 |       |       |
|   1 | SORT AGGREGATE          |      |     1 |     8 |            |          |       |       |
|   2 |   CONCATENATION          |      |       |       |            |          |       |       |
|   3 |    PARTITION RANGE SINGLE|      |    13 |   104 |     2   (0)| 00:00:01 |     2 |     2 |
|* 4 |     INDEX RANGE SCAN     | I    |    13 |   104 |     2   (0)| 00:00:01 |     2 |     2 |
|   5 |    PARTITION RANGE SINGLE|      |    13 |   104 |     2   (0)| 00:00:01 |     1 |     1 |
|* 6 |     INDEX RANGE SCAN     | I    |    13 |   104 |     2   (0)| 00:00:01 |     1 |     1 |
Predicate Information (identified by operation id):
   4 - access("D">=TO_DATE(' 2009-02-02 01:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
              "D"<=TO_DATE(' 2009-02-02 02:00:00', 'syyyy-mm-dd hh24:mi:ss'))
   6 - access("D">=TO_DATE(' 2009-01-01 23:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
              "D"<=TO_DATE(' 2009-01-01 23:59:59', 'syyyy-mm-dd hh24:mi:ss'))
       filter(LNNVL("D"<=TO_DATE(' 2009-02-02 02:00:00', 'syyyy-mm-dd hh24:mi:ss')) OR
              LNNVL("D">=TO_DATE(' 2009-02-02 01:00:00', 'syyyy-mm-dd hh24:mi:ss')))
SQL> set autotrace off
SQL>Asif Momen
http://momendba.blogspot.com

To set HOTSPOT for a field in ALV-oops and when clecked should call transac

Hi,
I need to set HOTSPOT for a field in O/P list using ALV-oops and when clecked should take me to Transaction VA01. Please help....
Thanks,
Prabhu

Hi,
Please go through this code it may help u.
REPORT zcls_alv_oops MESSAGE-ID z1.
TABLES : mara.
Types Declaration..\
TYPES :
BEGIN OF t_mara,
matnr TYPE matnr,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_mara,
BEGIN OF t_marc,
matnr TYPE matnr,
werks TYPE werks_d,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_marc.
Internal Tables Declaration..\
DATA :
i_mara TYPE TABLE OF t_mara,
i_marc TYPE TABLE OF t_marc,
i_fcat1 TYPE lvc_t_fcat,
i_fcat2 TYPE lvc_t_fcat.
Constants Declaration..\
CONSTANTS :
c_cont1 TYPE scrfname VALUE 'CONT1',
c_cont2 TYPE scrfname VALUE 'CONT2'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS:
s_matnr FOR mara-matnr NO INTERVALS.
SELECTION-SCREEN SKIP 1.
PARAMETERS :
p_hotspt RADIOBUTTON GROUP r1 DEFAULT 'X',
p_bttn RADIOBUTTON GROUP r1.
SELECTION-SCREEN END OF BLOCK b1.
\* Class forward referncing.
CLASS lcl_rcvr_class DEFINITION DEFERRED.
\* Pointers Declaration..
DATA :
lp_rcvr TYPE REF TO lcl_rcvr_class,
lp_cont1 TYPE REF TO cl_gui_custom_container,
lp_cont2 TYPE REF TO cl_gui_custom_container,
lp_grid1 TYPE REF TO cl_gui_alv_grid,
lp_grid2 TYPE REF TO cl_gui_alv_grid.
\* Local Class Definiton.
CLASS lcl_rcvr_class DEFINITION.
PUBLIC SECTION.
METHODS :
hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
ENDCLASS.
\* Local Class Implementation.
CLASS lcl_rcvr_class IMPLEMENTATION.
METHOD hotspot_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row_id-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD handle_double_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
ENDCLASS.
\* Start of Selection
START-OF-SELECTION.
\* Extract the Material Master data for the Input Material.
SELECT a~matnr
a~mtart
b~maktx
INTO TABLE i_mara
FROM mara AS a
INNER JOIN makt AS b
ON a~matnr EQ b~matnr
WHERE a~matnr IN s_matnr
AND b~spras EQ sy-langu.
END-OF-SELECTION.
IF NOT i_mara\[\] IS INITIAL.
\* Call Screen to display the Material Master data.
CALL SCREEN 100.
ELSE.
MESSAGE s121 WITH text-006.
ENDIF.
\*& Module DISP_GRID OUTPUT
\* text
MODULE disp_grid OUTPUT.
\* Build the Field catelog for Material Master data.
PERFORM build_fcat.
\* Display the Material Master data using ALV.
PERFORM disp_alv.
ENDMODULE. " DISP_GRID OUTPUT
\*& Module USER_COMMAND_0100 INPUT
\* text
MODULE user_command_0100 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
\*& Form build_fcat
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARA'.
IF p_hotspt EQ 'X'.
ws_fcat-hotspot = 'X'.
ENDIF.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ENDFORM. " build_fcat
\*& Form disp_alv
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv.
IF lp_cont1 IS INITIAL.
\* Create the Container Object of Material Master.
CREATE OBJECT lp_cont1
EXPORTING
container_name = c_cont1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6 .
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Master.
CREATE OBJECT lp_grid1
EXPORTING
i_parent = lp_cont1
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Master data by calling method.
CALL METHOD lp_grid1->set_table_for_first_display
CHANGING
it_outtab = i_mara
it_fieldcatalog = i_fcat1
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Set Handler for the Hot Spot Event.
CREATE OBJECT lp_rcvr.
IF p_hotspt EQ 'X'.
SET HANDLER lp_rcvr->hotspot_click FOR lp_grid1.
ELSE.
SET HANDLER lp_rcvr->handle_double_click FOR lp_grid1.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " disp_alv
\*& Module STATUS_0100 OUTPUT
\* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN_STAT'.
SET TITLEBAR 'T_100'.
ENDMODULE. " STATUS_0100 OUTPUT
\*& Module STATUS_0200 OUTPUT
\* text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'PLANT_STAT'.
SET TITLEBAR 'T_200'.
ENDMODULE. " STATUS_0200 OUTPUT
\*& Module DISP_GRID_plant OUTPUT
\* text
MODULE disp_grid_plant OUTPUT.
\* Build the Field catelog for Material Plant data.
PERFORM build_fcat_plant.
\* Display the Material Master Plant data using ALV.
PERFORM disp_alv_plant.
ENDMODULE. " DISP_GRID_plant OUTPUT
\*& Module USER_COMMAND_0200 INPUT
\* text
MODULE user_command_0200 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
\*& Form build_fcat_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat_plant.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'WERKS'.
ws_fcat-scrtext_m = text-004.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ENDFORM. " build_fcat_plant
\*& Form disp_alv_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv_plant.
IF lp_cont2 IS INITIAL.
\* Create the Container Object of Material Plant data.
CREATE OBJECT lp_cont2
EXPORTING
container_name = c_cont2
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Plant data.
CREATE OBJECT lp_grid2
EXPORTING
i_parent = lp_cont2
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Plant data by calling method.
CALL METHOD lp_grid2->set_table_for_first_display
CHANGING
it_outtab = i_marc
it_fieldcatalog = i_fcat2
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDIF.
ELSE.
\* Call method 'REFRESH_TABLE_DISPLAY' to refresh the grid data.
CALL METHOD lp_grid2->refresh_table_display.
ENDIF.
ENDFORM. " disp_alv_plant

How to specify tablespace for a primary key inde in create table statement

How to specify the tablespace for a primary key index in a create table statement?
Does the following statement is right?
CREATE TABLE 'GPS'||TO_CHAR(SYSDATE+1,'YYYYMMDD')
            ("ID" NUMBER(10,0) NOT NULL ENABLE,
            "IP_ADDRESS" VARCHAR2(32 BYTE),
            "EQUIPMENT_ID" VARCHAR2(32 BYTE),
            "PACKET_DT" DATE,
            "PACKET" VARCHAR2(255 BYTE),
            "PACKET_FORMAT" VARCHAR2(32 BYTE),
            "SAVED_TIME" DATE DEFAULT CURRENT_TIMESTAMP,
             CONSTRAINT "UDP_LOG_PK" PRIMARY KEY ("ID") TABLESPACE "INDEX_DATA"
             TABLESPACE "SBM_DATA";   Thank you
Edited by: qkc on 09-Nov-2009 13:42

As orafad indicated, you'll have to use the USING INDEX clause from the documentation, i.e.
SQL> ed
Wrote file afiedt.buf
1 CREATE TABLE GPS
2              ("ID" NUMBER(10,0) NOT NULL ENABLE,
3              "IP_ADDRESS" VARCHAR2(32 BYTE),
4              "EQUIPMENT_ID" VARCHAR2(32 BYTE),
5              "PACKET_DT" DATE,
6              "PACKET" VARCHAR2(255 BYTE),
7              "PACKET_FORMAT" VARCHAR2(32 BYTE),
8              "SAVED_TIME" DATE DEFAULT CURRENT_TIMESTAMP,
9               CONSTRAINT "UDP_LOG_PK" PRIMARY KEY ("ID") USING INDEX TABLESP
ACE "USERS"
10               )
11*              TABLESPACE "USERS"
SQL> /
Table created.Justin

Setting colors for item labels in JFreeChart (WaferMapRenderer)

Hi,
first of all, sorry for posting a JFreeChart related posting on this forum, but I didn't get a solution right now (I even didn't find anything useful on the JFreeChart website/forum). Here's my question...
I'm trying to set the color for item labels in the legend but with no success.
Here's a code example:
final JFreeChart chart = ChartFactory.createWaferMapChart(
    "Wafer Map Demo",         // title
    dataset,                  // wafermapdataset
    PlotOrientation.VERTICAL, // vertical = notchdown
    true,                     // legend
    true,                    // tooltips
    false
WaferMapPlot plot = (WaferMapPlot) chart.getPlot();
WaferMapRenderer renderer = new WaferMapRenderer();
renderer.setSeriesItemLabelPaint(0, Color.red);
renderer.setSeriesItemLabelPaint(1, Color.blue);
plot.setRenderer(renderer);The default behavior of the WaferMapRenderer is also strange because the item label as well as the item marker is painted black so you cannot distinguish different fields of the wafer map. Is this a bug or am I doing something wrong (or missing somehting)?
Any help would be greatly appreciated.
Thanks and best regards,
- Stephan

Your folder action script doesn't work because of one simple error:
set label index of every item of entire contents of processFolder to 7
Nowhere in your script is 'processFolder' defined, so AppleScript has no idea what you're trying to do.
Given that you (correctly) iterate through added_items, the correct format would be:
on adding folder items to this_folder after receiving added_items
repeat with item_ in added_items
tell application "Finder"
set label index of item_ to 7
end tell
end repeat
end adding folder items to
In other words, this changes the label index of each item just added.
That should work provided you're dropping files into this folder. If you're dropping folders then this would set the label index of the folder itself, but not necessarily the items within that folder. For that you'd need to add a check to see if item_ was a folder and add code to handle folders.
Also note that this kind of folder action will only work on the folder itself - that is, if you have folder A that contains subfolder B, then dropping a file into subfolder B won't trigger the script and won't change that item's label. To do that you'd have to attach your folder action to subfolder B.

Set tablespace for index in OWB

Similar Messages

Maybe you are looking for