Set up openbox with gdm
I am trying to set up openbox with gdm, but whenever X starts up I see the nvidia logo screen and then a blue screen for a few seconds and it dies and tries again.
This is the basic order of what I did to set it up:
pacman -S xorg
pacman -S nvidia-beyond
nvidia-xconfig
pacman -S gdm
# edit /etc/inittab
pacman -S openbox menumaker obconf gtk-theme-switch2 feh
cp /etc/xdg/openbox/* /home/james/.config/openbox/
# Then I made a openbox.desktop in /etc/X11/sessions
here you go:
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux arch 2.6.17-beyond #1 SMP PREEMPT Mon Sep 18 12:24:35 EST 2006 i686
Build Date: 19 September 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 4 23:49:44 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse0"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(**) FontPath set to:
/usr/share/fonts/misc
(**) RgbPath set to "/usr/lib/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2570 card 1028,0151 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24d2 card 1028,0151 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 1028,0151 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 1028,0151 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,24de card 1028,0151 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 1028,0151 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24db card 1028,0151 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,24d1 card 1028,0151 rev 02 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 1028,0151 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24d5 card 1028,0151 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,00f5 card 10de,037c rev a2 class 03,00,00 hdr 00
(II) PCI: 02:0c:0: chip 8086,100e card 1028,0151 rev 02 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfeafffff (0x2b00000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xefffffff (0x18000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfbf00000 - 0xfbffffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x00f5) rev 162, Mem @ 0xfc000000/24, 0xe0000000/28, 0xfd000000/24, BIOS @ 0xfea00000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfbfe0000 - 0xfbffffff (0x20000) MX[B]
[1] -1 0 0xfebff900 - 0xfebff9ff (0x100) MX[B]
[2] -1 0 0xfebffa00 - 0xfebffbff (0x200) MX[B]
[3] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[4] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[6] -1 0 0xfea00000 - 0xfea1ffff (0x20000) MX[B](B)
[7] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[8] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[9] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000df40 - 0x0000df7f (0x40) IX[B]
[11] -1 0 0x0000edc0 - 0x0000edff (0x40) IX[B]
[12] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[13] -1 0 0x0000eda0 - 0x0000edbf (0x20) IX[B]
[14] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[B]
[15] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B]
[16] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B]
[17] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B]
[18] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B]
[19] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[20] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[21] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[22] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B]
[25] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B]
[26] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B]
[27] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfbfe0000 - 0xfbffffff (0x20000) MX[B]
[1] -1 0 0xfebff900 - 0xfebff9ff (0x100) MX[B]
[2] -1 0 0xfebffa00 - 0xfebffbff (0x200) MX[B]
[3] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[4] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[6] -1 0 0xfea00000 - 0xfea1ffff (0x20000) MX[B](B)
[7] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[8] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[9] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000df40 - 0x0000df7f (0x40) IX[B]
[11] -1 0 0x0000edc0 - 0x0000edff (0x40) IX[B]
[12] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[13] -1 0 0x0000eda0 - 0x0000edbf (0x20) IX[B]
[14] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[B]
[15] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B]
[16] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B]
[17] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B]
[18] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B]
[19] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[20] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[21] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[22] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B]
[25] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B]
[26] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B]
[27] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfbfe0000 - 0xfbffffff (0x20000) MX[B]
[5] -1 0 0xfebff900 - 0xfebff9ff (0x100) MX[B]
[6] -1 0 0xfebffa00 - 0xfebffbff (0x200) MX[B]
[7] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[8] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xfea00000 - 0xfea1ffff (0x20000) MX[B](B)
[11] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[12] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000df40 - 0x0000df7f (0x40) IX[B]
[17] -1 0 0x0000edc0 - 0x0000edff (0x40) IX[B]
[18] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[19] -1 0 0x0000eda0 - 0x0000edbf (0x20) IX[B]
[20] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[B]
[21] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B]
[22] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B]
[23] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B]
[24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B]
[25] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[26] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[27] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[30] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B]
[31] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B]
[32] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B]
[33] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9625
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9625
Module class: X.Org Video Driver
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/xorg/modules/input/keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) NVIDIA dlloader X Driver 1.0-9625 Thu Sep 14 15:35:06 PDT 2006
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfbfe0000 - 0xfbffffff (0x20000) MX[B]
[5] -1 0 0xfebff900 - 0xfebff9ff (0x100) MX[B]
[6] -1 0 0xfebffa00 - 0xfebffbff (0x200) MX[B]
[7] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[8] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xfea00000 - 0xfea1ffff (0x20000) MX[B](B)
[11] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[12] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000df40 - 0x0000df7f (0x40) IX[B]
[17] -1 0 0x0000edc0 - 0x0000edff (0x40) IX[B]
[18] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[19] -1 0 0x0000eda0 - 0x0000edbf (0x20) IX[B]
[20] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[B]
[21] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B]
[22] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B]
[23] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B]
[24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B]
[25] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[26] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[27] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[30] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B]
[31] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B]
[32] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B]
[33] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfbfe0000 - 0xfbffffff (0x20000) MX[B]
[5] -1 0 0xfebff900 - 0xfebff9ff (0x100) MX[B]
[6] -1 0 0xfebffa00 - 0xfebffbff (0x200) MX[B]
[7] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[8] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xfea00000 - 0xfea1ffff (0x20000) MX[B](B)
[11] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[12] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000df40 - 0x0000df7f (0x40) IX[B]
[20] -1 0 0x0000edc0 - 0x0000edff (0x40) IX[B]
[21] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[22] -1 0 0x0000eda0 - 0x0000edbf (0x20) IX[B]
[23] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[B]
[24] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B]
[25] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B]
[26] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B]
[27] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B]
[28] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[29] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[30] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[31] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[33] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B]
[34] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B]
[35] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B]
[36] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce 7800 GS at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.71.22.21.09
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7800 GS at PCI:1:0:0:
(--) NVIDIA(0): DELL 1703FP (CRT-0)
(--) NVIDIA(0): DELL 1703FP (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): No valid modes for "1600x1200"; removing.
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024"
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
[1] 0 0 0xe0000000 - 0xefffffff (0x10000000) MX[B]
[2] 0 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xfbfe0000 - 0xfbffffff (0x20000) MX[B]
[8] -1 0 0xfebff900 - 0xfebff9ff (0x100) MX[B]
[9] -1 0 0xfebffa00 - 0xfebffbff (0x200) MX[B]
[10] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[11] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[13] -1 0 0xfea00000 - 0xfea1ffff (0x20000) MX[B](B)
[14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[15] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[16] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000df40 - 0x0000df7f (0x40) IX[B]
[23] -1 0 0x0000edc0 - 0x0000edff (0x40) IX[B]
[24] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[25] -1 0 0x0000eda0 - 0x0000edbf (0x20) IX[B]
[26] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[B]
[27] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B]
[28] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B]
[29] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B]
[30] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B]
[31] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[32] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[33] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[34] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[35] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[36] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B]
[37] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B]
[38] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B]
[39] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[40] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[41] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "NVIDIA Damage Notification Manager" (type: Other)
(II) XINPUT: Adding extended input device "NVIDIA Kernel RC Handler" (type: Other)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.
Similar Messages
-
Help setting up Compiz Fusion standalone with gdm, inittab, and tint
Hello!
I'd like to set up my fresh Arch install with Compiz Fusion standalone, using twim, and gdm as the login manager. This all with the inittab method of booting with gdm. Openbox is nice, but I have a fast PC - while I like minimalism, effects are nice.
I've looked at the wiki instructions, and a few forum threads, but haven't so far got it working.
Could someone please explain the different config files I will be working with, and how they mesh together? As in, what process does the system follow through them? Does ~/.xinitrc factor in, or is it only called through startx? That sort of thing.
And, does anyone know if Compiz Fusion will 'mesh' with tint, and provide the same mouse-over image previews of windows available in GNOME?
Thanks
Last edited by Ranguvar (2008-10-20 23:40:59)If you'll be using gdm create a file called fusion.desktop ("fusion" can be anything you want to name your session and will appear in gdm session listing). Place this file in /etc/X11/sessions.
Mine for reference:
/etc/X11/sessions/fusion.desktop
[Desktop Entry]
Encoding=UTF-8
Name=Fusion
Comment=Compiz Fusion Standalone
Exec=/usr/local/bin/start-fusion.sh
TryExec=/usr/local/bin/start-fusion.sh
Type=Application
Then you need to create a script and place it in /usr/local/bin. As you can see from my fusion.desktop file I've named the script start-fusion.sh. Here's mine for reference:
/usr/local/bin/start-fusion.sh
#!/bin/sh
# Avoid relying on autolaunch to improvise D-Bus sessions for each process
if test -z "$DBUS_SESSION_BUS_ADDRESS" ; then
eval `dbus-launch --sh-syntax --exit-with-session`
fi
#compiz ccp &
#emerald &
sleep 6 && cairo-dock &
sleep 12 && mplayer /usr/share/archlinux/arch-anim.mov &
exec fusion-icon
Make the script executable (do all above as root or use sudo) and you should be able to use gdm to login.
Does ~/.xinitrc factor in, or is it only called through startx?
Well, that would be the case if starting from runlevel 3. You would then want to add a line like this to it:
exec start-fusion.sh
btw: fusion-icon is used rather than the #'ed out method in start-fusion.sh as it provides a way to exit out of the session.
You can also use compiz-deskmenu from aur to provide you with a menu in your fusion session.
As far as tint is concerned, I haven't used it. I use cairo-dock which has a systray plugin. Advantage being I can use it as a widget and hide it away.
Last edited by my0pic (2008-10-16 03:06:49) -
Compiz starting with GDM allowing multiple users
When i start compiz after login I've got slow GDM when changing user and
white screen after second login.
So there's no way to launch compiz and support two different sessions?
Or can I start compiz together with gdm and not individually for each user?RAGHAVENDRA HARI N wrote:
Allowing multiple users to receive Ibot in OBIEE-11g with out specifying email addresses.
How to use S A System subject area in OBIEE-11g
How to specify condition in Ibot of OBIEE-11GYou can use the SA System subject area after you set it up by following the documentation link provided below. It could be used in OBIEE Delivers which enables contact information, such as e-mail addresses to be retrieved from a database and used as delivery devices in Delivers instead of having the user's manually setup their own delivery device.
Here is the link to the documentation on how to setup SA system subject area in OBIEE 11g:
http://docs.oracle.com/cd/E14571_01/bi.1111/e10541/sa_system.htm
You can set the condition in the condition tab which is the 3rd one I suppose. -
I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.
Welcome to the Apple community.
So long as you are logged into the iTunes Store, using the correct ID and password (settings >store), then you will always have access to your apps, books, music, TV shows etc etc bought via the iTunes Store on that account. -
is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin
Install this to get X11 functionality back in 10.8
http://xquartz.macosforge.org/landing/
Worked great for me and others.
Jerry -
My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green).
My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple Menu. The “Settings” does however displays the General menu allowing me to see:
Apple software: 7.1 (7003)
Apple TV: Model No. A1464, Part No. MD199B/A
Signal Strength shows 5 circles.
It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video. I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2. Can you help please?Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful. -
when i try to set up facetime with my Apple ID it does not let me saying it cannot verify my account? if i change my ID on the ipad deos it change it on my computer aswel?
Hi
I would try this since Apple TV is built to allow multiple Apple Ids
On you Apple TV
General > Settings >Itunes Store > Add New Account (put yours in here)
Then Switch account to your Apple Id
Cheers -
Having trouble setting up Mail with a POP account
I am trying to set up Mail with my Universities webmail service, and according to their tech page I need to set it to POP. I also made sure that I have the incoming and outgoing mail servers correct, and i've made certain that I am entering my username and password correctly. But when it loads and trys to get my mail it says that the password I supplied is incorrect, but I know that's not true. I am absolutley sure that both the username and password are entered correctly.
Does anybody know how I might fix this?
p.s. my girlfriend is having the exact same problem, so it isn't just me entering something wrongI know you said the usernames/passwords are correct but, (if you can), login via webmail using those same strings, see if that works.
Write the text to a note and copy and paste from there so you are sure you've not input something wrongly.
Failing that do a quick keychain first aid too.
If that don't work then I'm out of ideas, (for now at least). -
How to use two sets of books with one responsibility
Does anyone know if it is possible to run reports in the General Ledger business area of the Oracle EUL against two or more sets of books with the same responsibility? For example, I want a regional finance manager to be able to run a Discoverer GL report for both Bolivia and Peru using their South America GL Manager responsibility. It looks like you can do that for AR using HR security profiles but I'm not sure how to do it for GL. Thanks.
GregHi,
There are two types of security: business areas security which allows a user to access the folders in a BA and is controlled through Discoverer; and data security which filters the data returned in the report. The data security is usually implemented as a condition in the views mapped in the EUL, though it can be implemented as mandatory conditions in the EUL. The data security is controlled by Application system profiles.
In your case you will have conditions in the database views which only returning data for the set of books defined in the profile for the current responsibility. To bypass this security so that a responsibility can report on multiple sets of books you need to create new folders in the EUL that map onto database view or tables that do not have the data security.
Hope that helps,
Rod West -
My daughter and i share an itunes account. how do i delete her and set her up with her own?
my daughter and i share an itunes account. how do i delete her and set her up with her own?
You need to make an iTunes Store account in her name and with her unique Apple ID. Note that everything she has purchased and downloaded under your Apple ID will not transfer to hers. She will need (or you will) to repurchase all of her iTunes Store items.
She will also need her own user account on the computer if you share the same computer. -
I have a iPhone and iPad on one iTunes account, I have recently bought two further I touches fir the kids , should I set them up with their own apple ids and the can I transfer purchases through all devices,
Hi jhyiesla,
Im not sure wether I got you right or not. But my advice/s would be as follows:
These steps help you get rid of old apps you downloaded years ago and you do not use anymore.(Also frees space on your mac after emptying the trash)
1) go to iTunes and delete all applications in it. Make sure to move them to trash! Do not empty your trash yet. Its your backup if step 3 doesnt appear.
2) connect both your devices(one after each other) and make a backup. !!!Dont press the Sync button, press the Back Up Now Button
3) Then it asks you if you want to backup applications as well. Confirm. (This is how apps get transferred manually)
4) Then Sync your devices... The first time it might be, that there are some additional apps loaded to your devices you dont want to.. delete them on your Device (not iTunes) and after that you should be good every time you sync again.
5) now you can empty your trash on your mac.
Further,
- You should regularly connect your devices with iTunes to make sure they are backed up. (Even if you have activated iCloud backup, the iTunes backup is more proper i.e.. Apps)
- If you hate scrolling through a list of apps in iTunes, you can re/install apps directly on iOS not via iTunes. I absolutely never go to the "Applications" section in iTunes. I install and delete apps directly on iOS.
jl -
I have family plan of 5 iphones and all them have the same apple id, the q. is how I can set each one with their own apple id? please advise...
See How to Stop Sharing an Apple ID.
(Note that I am affiliated with that site, and some pages contain ads). -
Pretty much, I want to set up iCloud with my Mac and iPhone. I have my own Apple ID that is different from the rest of my family, if I set up iCloud with my devices, it won't interfere with the rest of my family's settings? This is REALLY important to be certain (my parents will kill me if this messes with their devices.
Ps. Has anyone found Dream Vacation Solitaire for Mac or something similar?If you set up iCloud with a separate Apple ID it will have no effect whatever on any other account.
-
My wife and I each have an apple computer and an iPhone. Setting them up with the iCloud put us on the same account. I take a lot of photos on job sites and she takes her own photos we have to scan though each others photos to find our own. How do I separate the accounts without one of us losing our own stuff?
Decide which device will be changing accounts. On that device, if you have any photos in photo stream that are not in your camera roll that you want to keep on the device, save them to the camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The device(s) that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iDevice. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to delete any data that you don't want in each account (such as deleting your wife's data from your account, and vice versa) you will have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete it. -
Trying to set up new ipad. We had one in my wifes name that we both used. We have set mine up with relevant apple id and emails but if i send mail it shows it is coming from my wife, completely confused. Can any one help, have we set thing up wrongly????
Hi Brodies Dad,
It sounds like you have the settings in the email account on your iPad set up in error. If you go to Settings > Mail, Contacts, Calendars > Accounts > select your Mail account > then select the account email address to look at the details > Is your name set correctly here? You can edit the name in this location, as well as any other details.
This article, about setting up an email account, takes you to the correct place to make changes as well.
iOS: Adding an email account
http://support.apple.com/kb/HT4810
Enjoy your new iPad!
Best,
Brett L
Maybe you are looking for
-
Helloall, Where can I get SAP Best Practice docuemntation, user guide and installation guide that I can use to describe and configure the process (S52): SCM ICH Contract manufacturing procurement & Supply network Inventory scenario. Thank you
-
Hi! I am writing a script where we are trying to use dynamic call types based on the inputs from a database look up. Basically the call is comes into the script and a database lookup is done on the AW to determine which call type is used. Later on
-
Can someone tell me if the below is available in OSB 11g.Or if this has been removed from OSB? "Locating Access Control Policies The Security page provides a link to the access control policies for a proxy service in the current ALSB domain. This pag
-
Thru project raise Sales order for billing ?
hi I am looking for any option available raising Sales order thru Project ie., CJ20N or CJ02. Currently we are creating customer project in Project System thru CJ01 with Project definitino along with WBS Elements. Create Network and assign WBS elemen
-
Hi all, I am successfully deploy the portal (version 7.0), and now i am facing some problems, actually, i am usuing the gateway, so that it is rewrite all other pages, and i have one system connect to the portal, and that system have one javascript f