Set user defined UUID for coherence extend clients

I notice in Coherence 3.5.2 there are improved jmx stats for tcp extend clients.
Right now I see a client is identified in jmx with a cryptic UUID. Is it possible for the tcp extend client to set its own UUID or alike, so one can more easily identify a client.

Currently, Coherence does not support connection naming.

Similar Messages

Problem creating user-defined metric for Database

I am logged in to EM/Grid Control as SYSMAN, any user with superadmin privileges or a 'normal' user with operator/full privileges for my database target. When I go to set up user-defined metrics for the target db I get the following warning "You will only be able to view User Defined metrics because you do not have Operator Privileges on host <db target name>". The Create button is disabled.
Can anyone offer any advise on where to identify the privilege problem?
Thanks

Well I did it with a host UDM calling a local script (which will be installed on shared drives for the development/test and production systems).
The local script cats the /var/opt/oracle/oratab file eliminating lines beginning with # or $ then takes the second argument of each line and loops through all entries using a checkit procedure. The checkit procedure determines if the appropriate log directores exist for the oracle home and does a find on the diretory looking for alert*.log and *.trc. If there are any then global variables get updated with the count and directory name.
There is an if statement before exit that checks of the count of files is greater than zero and write an appropriate em_result and em_message depending on the results.
I then created the UDM in EM to call this script and check for critical/warning thresholds.
Regards
Tim

Set user Defined Status in the Shopping Cart

Hello,
I am facing problem while Setting user defined Status in the shopping cart. Below are the steps which I have followed.
1. I have created Status profile via Transaction 'BS02' and also created the Status 'On Hold' with Status number 'Exxxxx'.
2. Entry of this external status is also created in the table TJ30.
3. Also I tried assigning this Status profile in Transaction type for "BUS2121".
After making the above configuration for the new User defined status I have used below function module in my program.
I am using FM "CRM_STATUS_CHANGE_EXTERN" to set the User defined status in the shopping cart.
CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN'
    EXPORTING
      objnr                    = ls_header-guid
      user_status          = lv_stat
    IMPORTING
      stonr                    = lv_stonr
After this FM I am also using "COMMIT WORK AND WAIT ".
But still my Status is not updated in the Shopping Cart.
Expert please suggest if some one has work in this scenario.
Best Regards,
Chirag Shah

Hi Chirag,
try to initialize Status schema before update.
CALL FUNCTION 'CRM_STATUS_OBJECT_CREATE'
     EXPORTING
       objnr                        = ls_header-guid
       obtyp                        = 'SCH'
       stsma                        = 'ZHOLD'
     EXCEPTIONS
       obtyp_invalid                = 1
       status_object_already_exists = 2
       stsma_invalid                = 3
       stsma_obtyp_invalid          = 4
       error_ocurred                = 5
       OTHERS                       = 6.
Regards
K

Create User-defined field for Marketing Documents

I need to create a User-Defined field for Marketing Documents under Title and Rows.
I need to do it via .NET instead of manually go into SAP to create it.
Does anyone can give me idea on how to do this?

Hi David,
There are examples of how to do this in the SDK samples (look for MetaDataOperations project in the DI samples).
There are also examples in the SDK help. Here's one:
Private Sub AddUserField()
'// The UserFieldsMD represents a meta-data object that allows you
'// to addremove fields from tables or change the fields' characteristics
    Dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
'// In any meta-data operation there should be no other object "alive"
'// but the meta-data object, otherwise the operation will fail.
'// This restriction is intended to prevent a collisions.
    '// The meta-data object needs to be initialized with a
    '// regular UserFields object
    Set oUserFieldsMD = oCompany.GetBusinessObject(oUserFields)
    '// When adding user tables or fields to the SAP Business One database
    '// use a prefix identifying your partner name space
    '// this will prevent collisions between the various partners add-ons
    '// SAP's name space prefix is "BE_"
    '// Set the Fields' mandatory properties
    oUserFieldsMD.TableName = "OCRD" '// BP table
    oUserFieldsMD.Name = "BE_UserField1"
    oUserFieldsMD.Description = "A user field"
    oUserFieldsMD.Type = db_Alpha '// am alphanumeric type
    oUserFieldsMD.EditSize = 20
    '// Add the field to the table
    oUserFieldsMD.Add
End Sub
Kind Regards,
Owen

How to create user defined metrics for SQL Server target?

The customer is not able to create a user defined metrics for SQL Server target.
This is very important for him to use this product.
He is asking how to create user defined metrics?
I sent him Note 304952.1 How to Create a User-Defined SQL Metric in EM 10g Grid Control
But it would work for an Oracle DB, but his target is SQL Server DB
Not able to find the "User-Defined Metrics" link from Database home page.
How to create user defined metrics for SQL Server target?

http://download-uk.oracle.com/docs/cd/B14099_19/manage.1012/b16241/Monitoring.htm

User defined fields for the Trading partner agreements

Hi,
Do we have any provision to create custom/user defined fields for the Trading partner agreements ?

Hello,
It would be great if you can provide complete details of your use case. I can suggest the possible way of implementation only after understanding your requirement.
Regards,
Anuj

User-defined fields for WBS

Hi,
Std SAP provides the following user-defined fields for WBS.
4 numeric fields
4 general fields
2 date fields
2 check boxes
We would like to use as many as 20 numeric user-defined fields for wbs.
Is there a way to do this?
Thanks in advance.
Manohar

hi,
It is not possible with user defined fields. You can achieve this using SPRO menu path Project System ->Structures->Work Breakdown Structure->Enhancement for Project Definition WBS lements -> Create customer specific fields in WBS.
You have to use enhancement CNEX0007 to create the required fields.
You will, ofcourse, need the help of an ABAPer to do this.
Muraleedharan.R

Unable to set the ip address for hosted network client after creating WIFI hotspot

Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
HI all
I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
but the problem I am facing is slight different
I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
as soon as I close the window, the ip address also disappears
when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
so what cause the failure in internet connectivity but success in hotspot connectivity?
check the screen shots...
can u help me..
its little complicated

Hi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support

Cannot Apply User Define Serial for ITEMS

hi ,
we have to generate user define serial # for items . for that we need to upload the MAC addresses as serial number from a excel spread sheet can any one help regarding that please
Thanks & regards
Moni.

Moni,
You have to do some coding to achieve this:
1. Create a table with three columns like serial_id, serial_number,taken_sts.
2. Load your serial numbers from spreadsheet to this table using an insert or SQL Loader.
3. Oracle gives you this package user_pkg_serial with nothing coded in package body. Add your logic to this body to return only one serial number at a time. That is the reason I asked you to create table with three columns. Maintain taken_sts column as N for only one serial number at a time and return that serial number (out parameter of the package body).
4. It is extremely important to return the x_return_status as 'S' otherwise this will not work.
5. Run the Generate Serial Numbers program and your serial numbers can be seen in the mtl_serial_numbers table.
Please let me know if you need more info.
Thanks
Nagamohan

User defined rule for missing triples

Hi,
i would like to know if there is a way to define a user defined rule for triples that are not contained in a model. With curly brace syntax it could be something like this:
INSERT INTO mdsys.semr_validation_rb VALUES(
'test_rule',
'{?s ?p ?o. OPTIONAL{?s rdf:type ?t}}',
't is null',
'(?s <hasType> "false")',
null);
Unfortunately this is not working. Has anybody a suggestion to solve this problem with user defined rules?

Hi,
This is related to the following post.
built-in primitives(noValue,remove) for user defined rules
Note that there is something you need to pay a bit attention to.
Say your original graph contains
:John :fatherOf :Mary
but not any type classification for :John (i.e. no match for {:John rdf:type ?t})
Assume you add the following triple according to the rule you described
(:John <hasType> "false")
Now, what happens if :John is classified as a :Person (or :Parent, :Father),
do you want to withdraw* :John <hasType> "false"?
Thanks,
Zhe

User Defined Metric for default ALERT log directory

On our system we have moved the alert log to a non-default location. If we use the wrong initialization file or something else goes haywire then trace files and alert logs get placed in the $ORACLE_HOME/rdbms/log directory.
I want to create a user defined metric for each machine that will look in all the $ORACLE_HOME/rdbms/log directories for each ORACLE_HOME on the server checking for any alert*.log or *.trc files. Creating an alert if it encounters any of these files.
I don't know if I should do it as a host UDM or an instance UDM. And more to the point how do I get it to see the multiple homes if the server has more than one.
Any ideas would be appreciated.
Thanks
Tim

Well I did it with a host UDM calling a local script (which will be installed on shared drives for the development/test and production systems).
The local script cats the /var/opt/oracle/oratab file eliminating lines beginning with # or $ then takes the second argument of each line and loops through all entries using a checkit procedure. The checkit procedure determines if the appropriate log directores exist for the oracle home and does a find on the diretory looking for alert*.log and *.trc. If there are any then global variables get updated with the count and directory name.
There is an if statement before exit that checks of the count of files is greater than zero and write an appropriate em_result and em_message depending on the results.
I then created the UDM in EM to call this script and check for critical/warning thresholds.
Regards
Tim

I want to set User-define characteristics'group in receiver in pa-cycle.

I want to set User-define characteristics'group in receiver in pa-cycle.
I want to create PA cycle.
My pa structure included User-define characteristics.
When I creat PA cycle, I want to set User-define characteristics'group in receiver in pa-cycle.
How can I do it?

I soved it using set(t-code : gs01)

User defined function for getting last string in the line

Hi Experts,
I am not java expert, can anyone give me user defined function for getting last string in the line.
for example if the source field is "NEW ARBOUR SQUARE" i want to pass to target field only last string that is "SQUARE"
please help me out of this.
Kind Regards.
Praveen.

You don't even need a UDF for this. In the graphical editor look for the standard functions and once you do a scroll over on 'text functions; you will find what you are looking for.
Just a piece of advice, try keeping UDF's to minimum unless really required or it is complicated without it.
regards

Error in User defined function for dynamic file naming

Hi,
While creating User Defined function with this following code for dynamic fieldname
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
which options should i select for cache Value, Context, Queue
for Augument , what name shd i mention.
Regards,
Varun

Hi Varun,
I guess I have answered a similar question just a few minutes before on very similar post from you. Just pasting the same here .................
Are you trying to access the ASMA values from the SOAP header of the XI message for the source file name?
First of all you need to Set the Sender File Adapter for Set ASMA and then file name. So it will work fine when you actually run the scenario end to end.
But in the mapping tool when you test the mapping - there is not message header updated with the actual source filename - and whenever you try to read the FileName attribute in the message header from the UDF - it cannot find the object and returns a NullPointerException.
I would suuggest for your mapping tool testing to be successful, have a check in the java code for null values,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
If (ourSourceFileName != null)
Return ourSourceFileName;
Return "NoFileName.txt";
Let us know if this works.
Regards,
Suddha

Making a User Defined Function for Mapping in XI

Hi folks..
I knw how to make User defined Function in XI,
i was wondering about can we have any room for making a function for Initializing Purpose, which intializes few fields in source Message to some Global variables, and later we can use these Global Variables to set the the Target field
My Doubt is this...
i have Source & target Structure like this Structure like this....
SOURCE TEST DATA IS...
Parentsrc
 child1src a
 child2src b
 child3src c
 child4src hi
 child4src hello
 child4src hey
(On the basis of instances of child4src the istance of the Parentdst will be generated)
TARGET DATA SHUD BE LIKE THIS....
Parentdst
 child1dst a
 child2dst b
 child3dst c
 child4dst hi
Parentdst
 child1dst a
 child2dst b
 child3dst c
 child4dst hello
Parentdst
 child1dst a
 child2dst b
 child3dst c
 child4dst hey

Hi
You have to modify your target structure:
Source
Parentsrc
child1src a
child2src b
child3src c
child4src hi
child4src hello
child4src hey
Target
root
Parentdst
child1dst a
child2dst b
child3dst c
child4dst hi
Parentdst
child1dst a
child2dst b
child3dst c
child4dst hello
Parentdst
child1dst a
child2dst b
child3dst c
child4dst hey
</root>
Now map like this:
child4src -
Parentdst
child1src--|
child4src--| UseOneAsMany -- Splitbyvalue --- child1dst
child4src--|
child2src--|
child4src--|UseOneAsMany --Splitbyvalue --- child2dst
child4src--|
child3src--|
child4src--| UseOneAsMany -- Splitbyvalue --- child3dst
child4src--|
child4src -- SplitbyValue -- child4src.
Regards
Suraj

Set user defined UUID for coherence extend clients

Similar Messages

Maybe you are looking for