Set value of System Matrix Form using SDK

Is is possible to set matrix value using SDK of user defined form. Plz forward code for same.

Yes it is possible. You need to get the form and into the form the item, cast it to a matrix and then set the values into it.
There is plenty of samples you can use to learn about UI API. You can download them directly from SDN.

Similar Messages

Set value to system matrix (38) cell

Hello,
Thanks for your reply.
I need to set value for some UDF on a system matrix (38). Crurrently ,I use following code:
public void SetValue(string columnUniqueId, int matrixRowIndex, string value);
(I'm using the coresuite framwork)
The coresponding way in SDK would be:
oMatrix.Columns.Item("columnUniqueId").Cells.Item("matrixRowIndex").Specific.value = "value"
This works but when I have more than 10 UDF to fill together, the performance is bad. It takes nearly 3-4 seconds to load one item(row).
Is there any fast way to set the value? Or is there any other suggestion how to do it?

No, the problem is not by loading of UDFs by a existing document.
But when you create a new document and you add a new postion to the document by choosing an item. Then our AddOn copies the UDF values from the item master data into the corresponding UDFs in the postion. At this moment I have to write them manually.
The best would be when the UDFs in the Item Master Data would be autiomatically created also in the postion of documents. Because in this way they would be automatically loaded by SBO itself.
I think SBO has a mistake in its design by here.

Focus when setting value in system matrix

Hi All,
Starting from SAP Business One 8.8 SAP changed the behaviour of the matrix focus.
Previously, after you set a value in a system matrix with the UI API, the focus was automatically restored to the item that previously had the focus. In 8.8, the focus remains on the matrix cell.
We're currently facing different issues with addons which were working in the past as this is a change of behaviour.
I would like to know from other forum users what they think about this change of behaviour, is it good, not good?, ...
Thank You,
paolo

Hi Paolo,
I ran in to this issue on a number of my addons which caused me a lot of extra work. Personally I thought it was a weird change to make as I would rarely (if ever) want to automatically set focus to a cell in a matrix when the value is changed through code. Typically my addon might be setting 3 or more values in a row (based on data that the user selects) and, after the change to the UI API, the screen flickers badly and the focus ends up on the final cell that was updated which can make data entry awkward (especially as Form Settings allows any user to change the order of the columns). In the end I had to freeze the form during my updates and then call the Click method on the cell where I wanted focus to remain.
I did raise this with SAP support and they said it was a deliberate design change. Hopefully they will change it again so that the developer can pass in a parameter or something to control where the focus is placed after the update.
Kind Regards,
Owen

Is there any way to put the values inthe system matrix which is non editabl

is there any way to put the values inthe system matrix which is non editable...
this Q is not that much priority since i had achieved the requirement other way round by having user defined matrix ... but if i get the way for this it will help my add on performance much better...

Hi Raj, I didnt get all the details but here some ideas how you can solve your issue:
Depending in the system form you are working you can always use a DBDataSource in order to manipulate the rows in a matrix. It's much better as using the objects of the matrix itself. In this case you can use:
oMatrix.FlushToDataSource()
oDBDsource.SetValue("U_Quan", pVal.Row, "101")
oMatrix.Clear()
oMatrix.LoadFromDataSource()
As you can see in SetValue i'm obtaining the Column, then the row number and then setting a NEW value for this cell.
Please consider if you can use DBDataSource instead of UserDataSource.
If the answer is yes then you can use the following:
oMatrix.FlushToDataSource()
'//Get the line you want
matrix.GetLineData(pval.row)
'//Call the Userdatasource assigned to that column
UserDataSource = UserDataSources.Item("ItmCode")
'//Set the new value
m_UserDS.ValueEx = "A02520"
oMatrix.LoadFromDataSource()
You can also use:
oMatrix.Columns.Item("ItemName").Cells.Item(l_rownum).Specific.String = "A02520"
In case you are not assigning the string in a combobox of course.
Good luck!
Felipe

How to set value for trim and bleed using jsx script?

I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
Following is the code I am trying with:
var _saveName = new File ( root_path +_strFileName+".pdf");
    var _saveOpts = new PDFSaveOptions();
    _saveOpts.printerResolution = 300;
    var bleedarray = new Array();
     bleedarray[0] =9.00;
     bleedarray[1]=9.00;
     bleedarray[2]=9.00;
     bleedarray[3]=9.00;
    _saveOpts.bleedOffsetRect = bleedarray;

I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

Unable to access value in System Environment Variable using Java

I am using Java code to get the value of a System Environment Variable using the Runtime, Process java classes.
The code works fine in tomcat, but when deployed in 9ias the code is unable to retrieve the value stored in the System environment variable in Windows 2000.

Thanks for the comment steve, here is the code which i am using.
     public String getEnvironmentVariable()
               // This will get the FEDREP_HOME environment variable
               String FEDREP_HOME = null;
               Process p = null;
               Runtime rt = Runtime.getRuntime();
                    try {
                         // invokes a shell-command to retrieve FEDREP_HOME variable
                         String OS = System.getProperty("os.name").toLowerCase();
                              // Get the Windows 95 environment variable
                              if (OS.indexOf("windows 9") > -1)
                                        p = rt.exec( "command.com /c echo %FEDREP_HOME%" );
                              // Get the Windows NT environment variable
                              else if (OS.indexOf("nt") > -1)
                                        p = rt.exec( "cmd.exe /c echo %FEDREP_HOME%" );
                              // Get the Windows 2000 environment variable
                              else if (OS.indexOf("2000") > -1)
                                        p = rt.exec( "cmd.exe /c echo %FEDREP_HOME%" );
                              // Get the Windows XP environment variable
                              else if (OS.indexOf("xp") > -1)
                                        p = rt.exec( "cmd.exe /c echo %FEDREP_HOME%" );
                              // Get the unix environment variable
                              else if (OS.indexOf("linux") > -1)
                                        p = rt.exec( "sh -c echo $FEDREP_HOME" );
                              // Get the unix environment variable
                              else if (OS.indexOf("unix") > -1)
                                        p = rt.exec( "sh -c echo $FEDREP_HOME" );
                              // Get the unix environment variable
                              else if (OS.indexOf("sunos") > -1)
                                        p = rt.exec( "sh -c echo $FEDREP_HOME" );
                              } else
                                        System.out.println("OS not known: " + OS);
                         // set up to read subprogram output
                         InputStream is = p.getInputStream();
                         InputStreamReader isr = new InputStreamReader(is);
                         BufferedReader br = new BufferedReader(isr);
                         // read output from subprogram
                         FEDREP_HOME = br.readLine();
                         br.close();
                    } catch(Exception ex)
                              System.out.println("Error when getting FEDREP_HOME environment variable");
                              ex.printStackTrace();
          return(FEDREP_HOME);

How to get/set value in illustrator preference file using ActionScript 3.0

Hi all,
I want to get/set the flex panel components preference in illustrator preference file using ActionScript 3.0.
I tried to achieve this like --
import com.adobe.illustrator.Preferences;
var pref : Prefereneces = new Preferences();
//To set value I used this...
pref.setStringPreference("url", id1.text);
//To get value I used this..
id1.text = pref.getStringPreference("url");
i think there is prb in creating Preference variable but I am unable to resolve.
plz help.
Thanks.

I am having trouble with setStringPreference. It seems to be setting the value to 0 in the Prefs file. When I first wrote the code, it was working, but something is keeping it from saving the right value now. Did you get yours working? Any ideas?

Set up a system that can use iPad

What does it take to set up a system? I cant seem to to find a how to for enterprise ipad use. I want an ipad that has nothing but an RDP connection that i control.

You could via the Restrictions lock out the use of the Mail and Safari apps, and turn off the ability to install other apps. That's all you can do, though; you could not lock out all the other apps other than your RDP app. For more information, see:
http://support.apple.com/kb/HT4213
As to wiping remotely, you could do that via the Find My iPad service, but that's not hard to defeat. A third-party management system such as Casper from JAMF Software might offer more capabilities for both wiping and configuration.
Regards.

Setting up DAQ system for testing (using pressure transducer, linear position sensor and strain gauges)

Hello,
I like to get your suggestion in setting up the DAQ system. I am very beginner in this issue.
These SCXI listed below are what we have in the laboratory. I will use DAQ card 6062E.
SCXI 1000
SCXI 1520
SCXI 1140
SCXI 1142
SCXI 1305 , 1302 , 1300
SCXI 1122
SCXI 1100
I will use linear position sensor in my experiment. But I'm not sure which SCXI shoud I connect to this sensor.
This sensor gives 4-20mA output. it requires +13 to +28Vdc excitation.
I will use pressure transducer (strain gauge type) which gives 100mV output and requires 10Vdc supply.
I will use strain gauges 350 ohm.
Regarding to the number of channels used in my experiment, I will use 1 channel of pressure transducer, 1 channel of linear position sensor and 3 or 4 strain gauges.
Could you please suggest me which SCXI should be used with pressure transducer, linear position sensor and strain gauges.
Now I'm thinking to use SCXI 1520 with strain gauges and pressure transducer. Is that ok?
But I'm not so sure on the linear position sensor which gives current output.
And regarding to sampling rate, I like to get minimum of 60-70 KS/s for pressure transducer. And around 1KS/s for linear position sensor and 1KS/s for each channel of strain gauge are enough. Can I archieve these sampling rate from the available SCXI modules mentioned before? I attached the datasheet of pressure transducer and linear position sensor for you. Please see attached files.
I'm reallly look forward for your suggestion.
Thank you in advance,
Ganchai.
Attachments:
XPM6_mini. pr. transducer.pdf ‏115 KB
linear-position-sensor.pdf ‏1683 KB

Hi Ganchai,
I would recommend the 1520 with a 1314 terminal block for connecting your pressure transducer and strain gauge. It is designed for excitation, bridge completion and has many other features to fit these applications. For your linear position sensor, try using the 1100 module with an additional precision shunt resistor. For example, our 1308 terminal block has built in 249Ohm shunt resistors for taking current inputs for your 1100. These connections should give you the readings you would like.
As far as sampling rate goes, you should be fine with your requirements. Good luck and I hope you are succesful.
PBear
NI RF

Plz help me how to set values in js from form

hi alll.......
i have a problem in my jsp..........i had given hyperlink for second action in jsp, user will select an id from combo...and insert values in text box when they click on button i need to insert these values in database.......
problem here is all values are passing null value........i am setting through form..i ma not getting the values from anywhere.
i don't know the problem will u plz help me out in this.........
thanks in advance.......]chintu

Your question and the way you type doesn't make much sense to me. Could you be specific about the problem - maybe with code snippets.

ADF set value problem when commiting forms..

We are setting a binded item value using falowing expression.
inputText47.setSubmittedValue(null);
inputText47.setValue(sahis.getAttribute("UserId"));
AdfFacesContext.getCurrentInstance().addPartialTarget(inputText47);
AdfFacesContext.getCurrentInstance().partialUpdateNotify(inputText47)
Everything same OK.
But when we press #{bindings.Commit.execute} button
inputText47's value dissapears.
Urgent help needs.
Thanks a lot.

it seem a binding refactoring problem.
We have added the columns of inputText47 after that page designed.
So Even we add this item to the screen it doesn't save its value to the database when committed.
is it possible to solve this problem?
The page is faily complext. So we don't want to redesign it.

Modifying excisting SBO forms using SDK

I have just started to learn SDK and I wardering If its possible to make changes to forms that comes with SBO. For instance lets say one wants to add an extra textbox to form Phone Book under Human Resources, how can that be done?

Hello
You have SAP Sample 11.SystemFormManipulation to modify Order form
or the Technical Demo Add On here:
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/add-on technical demo v2 for sap business one 2005.zip
Message was edited by: Sébastien Danober

Set active column of matrix using SDK

Hi,
How do i set active (FormSettings>TableFormat>Active Checkbox) column of matrix in order form using SDK?
Thanks

HI
replace the COLID with the id of the column, and put this code into the form_load event and beforeaction=false
oMatrix.Columns.Item("COLID").Editable = True
oMatrix.Columns.Item("COLID").Visible = True
regards,
J.
if the answer is ok, please reward.

Form settings using SDK

Hi Friends
I am doing on Purchase order form.i need to set visible some column of matrix visible and active (in table Format and RowFormat) with out using form setting inter face , means through code using SDK.Is it possible
Thanks

sorry, i haven't yet get a solution.
actually i need to position my userfield in between Quandity and UnitPrice. In Table CPRF I Changed its 'VisualIndx' and 'ExpandIndx'
Now in Table CPRF Record is Like below
ColID                            VisualIndx             ExtendIndx
Quantity(Coulumn11)             13                          13
UnitPrice(Coulnn 14)              17                         257
UserField -                            14                          14
But still dispalying my UserField on last Column.
I did all the process after SAPB1 Application stoped
Edited by: Muna on Jul 24, 2008 12:03 PM
Edited by: Muna on Jul 24, 2008 12:05 PM

Setting persitent system environment variables using java program

hai,
Iam tryng to write installation for an application,which require to set some persistent system environment variables using java program. I have tried using set command Runtime.getRuntime().exec("cmd /c set blah blah "),but this applies only to that particular DOS promt only,i presume.And this is not perisistent.please do help.
Biju

The solution I proposed worked only on Windows XP/2003.
The following solution will work on Windows NT/2000/XP/2003 with JDK 1.2+.
1- Download the [url http://www.gjt.org/download/time/java/jnireg/registry-3.1.3.zip]JNIRegistry zipped archive.
2- Open the registry-3.1.3.zip file and extract in the folder of your choice ( Eg. c:\setenv ) only the 2 first files (when sorted by path): ICE_JNIRegistry.dll and registry.jar.
You don't need to keep the folder tree in the extraction.
3- Create the following SetEnv.java file in the same folder ( Eg. c:\setenv ).
import com.ice.jni.registry.Registry;
import com.ice.jni.registry.RegistryKey;
import com.ice.jni.registry.RegStringValue;
import com.ice.jni.registry.RegistryValue;
public class SetEnv
    static final String REG_HKLM_SUBKEY_NAME = "SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Environment";
    public static void main(String[] args)
    throws Exception
        new SetEnv().exec(args);
    void exec(String[] args)
    throws Exception
        if (args.length != 2)
            throw new IllegalArgumentException("\n\nUsage: java SetEnv {varName} {varValue}\n\n");
        String varName = args[0];
        String varValue = args[1];
        RegistryKey key = null;
        RegStringValue value;
        try
            key = Registry.HKEY_LOCAL_MACHINE.openSubKey(REG_HKLM_SUBKEY_NAME, RegistryKey.ACCESS_ALL);
            value = new RegStringValue(key, varName, RegistryValue.REG_EXPAND_SZ);
            value.setData(varValue);
            key.setValue(value);
            key.flushKey();
        finally
            try { key.closeKey(); }
            catch (Exception e) {}
}4- Compile it.
javac -classpath .;registry.jar SetEnv.java
5- Run it. varName and varValue are strings of your choice.
java -classpath .;registry.jar -Djava.library.path=. SetEnv varName varValue

Set value of System Matrix Form using SDK

Similar Messages

Maybe you are looking for