Seting up virtual directories with Weblogic
Is there a way to set up virtual directories with Weblogic?
It's really simple.
I'm running out of space on the server X server
I want to move some of the share point to the terastation; and possible new users home directory as well.
I've tried mounting the terastation to the AD of the Xserver, but it doesn't work, for whatever reason, always return me a login error. (but I can mount any windows computer without any problem)
DaddyPaycheck > I tried with the faqs you sent me, tried with the "update" they have posted, NONE of them worked. I contacted buffalo and they send me another "update", it didn't work either.:-(
GeekMan > How do you have it set up?
Any suggestions???
thanks
Similar Messages
-
Exchange 2013 Autodiscover and Webservices virtual directories with wrong address
Hey people,
I have 3 2013 Servers
Server 1 CAS
Server 2 & 3 MBX
having a bit of trouble here - everything was working fine after migration (about 6months ago), and now mac users can't access e-mail.
If I try to access EWS page (https://webmail.domain.co.ao/EWS/exchange.asmx) , i get
Service
You have created a service.
To test this service, you will need to create a client and use it to call the service. You can do this using the svcutil.exe tool from the command line with the following syntax:
svcutil.exe https://SERVER2.domain.int:444/EWS/Services.wsdl
If I try to access the autodiscover webpage, i get
<?xml version="1.0" encoding="UTF-8"?>
-<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">-<Response>-<Error Id="1286627925" Time="17:58:59.7730521"><ErrorCode>600</ErrorCode><Message>Invalid Request</Message><DebugData/></Error></Response></Autodiscover>
When testing outlook web services, i get the following error
[PS] C:\Windows\system32>Test-OutlookWebServices
Source ServiceEndpoint Scenario Result Latency
(MS)
SERVER2.domain.int webmail.domain.co.ao Autodiscover: Outlook Provider Failure 64
SERVER2.domain.int Exchange Web Services Skipped 0
SERVER2.domain.int Availability Service Skipped 0
SERVER2.domain.int Offline Address Book Skipped 0
if i run
[PS] C:\Windows\system32>Get-AutodiscoverVirtualDirectory | fl
Creating a new session for implicit remoting of "Get-AutodiscoverVirtualDirectory" command...
RunspaceId : 9f23dad1-7806-42a6-8545-89b66847a359
Name : Autodiscover (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity, OAuth}
ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity, OAuth}
LiveIdNegotiateAuthentication : False
WSSecurityAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : False
WindowsAuthentication : True
OAuthAuthentication : True
AdfsAuthentication : False
MetabasePath : IIS://SERVER1.domain.int/W3SVC/1/ROOT/Autodiscover
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\Autodiscover
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : SERVER1
InternalUrl : https://webmail.domain.co.ao/autodiscover/autodiscover.xml
ExternalUrl : https://webmail.domain.co.ao/autodiscover/autodiscover.xml
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=Autodiscover (Default Web
Site),CN=HTTP,CN=Protocols,CN=SERVER1A,CN=Servers,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=int
Identity : SERVERONE\Autodiscover (Default Web Site)
Guid : fbed978f-7442-46ac-bb3c-53d9d7995507
ObjectCategory : domain.int/Configuration/Schema/ms-Exch-Auto-Discover-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchAutoDiscoverVirtualDirectory}
WhenChanged : 12/19/2013 10:30:26 AM
WhenCreated : 12/19/2013 10:30:26 AM
WhenChangedUTC : 12/19/2013 9:30:26 AM
WhenCreatedUTC : 12/19/2013 9:30:26 AM
OrganizationId :
OriginatingServer : DC2.domain.int
IsValid : True
ObjectState : Changed
and run
[PS] C:\Windows\system32>Get-WebServicesVirtualDirectory | fl
RunspaceId : 9f23dad1-7806-42a6-8545-89b66847a359
CertificateAuthentication :
InternalNLBBypassUrl :
GzipLevel : High
MRSProxyEnabled : False
Name : EWS (Default Web Site)
InternalAuthenticationMethods : {Basic, Digest}
ExternalAuthenticationMethods : {Basic, Digest}
LiveIdNegotiateAuthentication :
WSSecurityAuthentication : False
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : True
WindowsAuthentication : False
OAuthAuthentication : False
AdfsAuthentication : False
MetabasePath : IIS://SERVER1.domain.int/W3SVC/1/ROOT/EWS
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\EWS
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : SERVER1
InternalUrl : https://webmail.domain.co.ao/EWS/exchange.asmx
ExternalUrl : https://webmail.domain.co.ao/EWS/exchange.asmx
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=EWS (Default Web Site),CN=HTTP,CN=Protocols,CN=SERVRE1,CN=Servers,CN=Exchange
Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=DOMAINL,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domainl,DC=int
Identity : SERVER1\EWS (Default Web Site)
Guid : cbdd447b-54f8-4bba-9834-6c28b807711e
ObjectCategory : domain.int/Configuration/Schema/ms-Exch-Web-Services-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchWebServicesVirtualDirectory}
WhenChanged : 12/19/2013 9:31:11 AM
WhenCreated : 12/19/2013 9:31:11 AM
WhenChangedUTC : 12/19/2013 8:31:11 AM
WhenCreatedUTC : 12/19/2013 8:31:11 AM
OrganizationId :
OriginatingServer : DC2.domain.int
IsValid : True
ObjectState : Changed
Summarizing:
webmail.domain.co.ao maps to server1
Autodiscover and exchange web services point out to server1 (CAS), but when openning the respective webpages, the result is an error.
I have already deleted and recreated the autodiscover and EWS virtual directories but with no success.
Help anyone?
Many thanks,
AndreyHi Andrey,
Exchange Web Service in Exchange server configuration is working for all users in your Exchange environment, not just for one specific user. If you want to double make sure the EWS service in client side, we can directly access the EWS URL in IE of your
Windows machine, and see whether a proper XML file is returned. If so, then we can safely ignore the web service test result.
As for automatic signature application, do you mean
Add a signature automatically to every message? Please try to remove the signature and reset it again to check whether the issue persists.
Thanks,
Winnie Liang
TechNet Community Support -
Local director with multiple virtual servers
I have a local director with 4 interfaces. Two interfaces are used for 2 virtual servers each bound to 2 real servers. The virtuals and the reals are on the same sub-net as the local director's IP address.
I would like to know if I can use the other 2 interfaces to bind 2 real addresses to a third virtual where all three of the address are located on a different Subnet from the servers already present.Yes this is possible. However, in order to make this work you will need to configure a couple
of things. First, on the Local Director you should configure an 'alias ip address' that belongs in this new subnet. Second, you need to configure a secondary IP address on the upstream router. This will serve several purposes. One, the servers will be able to reach devices outside their own subnet. Two, the router will now belong to this subnet and therefore will be able to ARP for the new virtual.
Hope it helps.
Best regards,
Chip Schneider
Cisco TAC -
Problem register Oracle Virtual Directory to WebLogic - urgent ... pls help
Hi,
I'm a new to Oracle product and would like to install and run Oracle Virtual Directory for the following purpose:
Using LDAP client that connects to OVD and to issue ldapsearch command line based on the attrbiutes and filters of each one of the two Directories behind the OVD..
|-- Tivoli LDAP directory
LDAP client -> OVD ---|
|-- MS AD
I have downloaded the identity management package 11g and install only the OVD on Windows 2003 standard machine.
I then realized that I have to install the WebLogic package to have WEB UI to the OVD admin.
So I downloaded the WebLogic 10.3.1.0 package and install it.
I followed the installation instructions of
'Installing and Configuring Only Oracle Virtual Directory Without a WebLogic Administration Domain' at http://download.oracle.com/docs/cd/E12839_01/install.1111/e12002/ovd.htm#CIHFFAFH
and complete the installation.
Notice that the OVD and the WeblOgic SW are installed on the same Windows machine.
After that I had to register Oracle Virtual Directory with the WebLogic Administration Server.
Running the command-line I got the following error:
Deploying NonJ2EEManagement Application...Done
Command failed: Exception while registering the instance
Details are logged in C:\....\provision.log
opmnctl registerintance: failed
The provision.log file has the following exception call stack:
Aug 18, 2009 4:08:05 PM oracle.as.config.provisioner.InstallerCmdLine logInitialCommand
INFO: Start of command: [registerinstance, -adminHost, 127.0.0.1, -adminPort, 7001, -adminUsername, weblogic, -oracleHome, C:\oracle\product\11.1.1\OracleIDM_1, -oracleInstance, C:\as_admin\asinst_1]
Aug 18, 2009 4:08:14 PM oracle.as.config.provisioner.InstallerCmdLine handleRunFailure
SEVERE: Command failed:
oracle.as.config.ProvisionException: Exception while registering the instance
at oracle.as.config.impl.OracleASInstanceImpl.register(OracleASInstanceImpl.java:239)
at oracle.as.config.provisioner.commands.RegisterInstanceCommand.execute(RegisterInstanceCommand.java:11)
at oracle.as.config.provisioner.InstallerCmdLine.run(InstallerCmdLine.java:86)
at oracle.as.config.provisioner.InstallerCmdLine.main(InstallerCmdLine.java:44)
Caused by: oracle.as.config.ProvisionException: Unable to validate NonJ2EEManagement Application deployment on admin server.
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:595)
at oracle.as.config.impl.OracleASInstanceImpl.register(OracleASInstanceImpl.java:219)
... 3 more
Caused by: oracle.as.config.ProvisionException: The AdminServer is not enabled for NonJ2ee applications.
at oracle.as.config.impl.RuntimeServiceConnection.isValidJrfInstall(RuntimeServiceConnection.java:547)
at oracle.as.config.impl.RuntimeServiceConnection.deployNonj2eeApplication(RuntimeServiceConnection.java:201)
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:587)
... 4 more
Any thoughts ?Hi,
I am also facing the same problem. I have oracle internet directory 11.1.1 installed without domain. I then installed weblogic 32bit exe on same windows server.
while registering getting the same error. I think it is because of bit compatibility. OID is 64bit and weblogic is 32bit. Not sure.
thanks -
Creation of Virtual Directory in weblogic.xml (OBIEE11 Weblogic)
We are using OBIEE 11.1.1.6.4, we want to create a Virtual directory mapping in weblogic server so that we can place our static image files to access from the application URL.
To do this activity, we have performed following steps -
1) Navigated to C:\OBIEE11G\Oracle_BI1\bifoundation\jee
2) Open analytics.ear file
3) Existing code in weblogic.xml is: (if weblogic.xml is not present we need to create the file with below code)
<?xml version = '1.0' encoding = 'US-ASCII'?>
<weblogic-web-app xmlns="http://xmlns.oracle.com/weblogic/weblogic-web-app">
<session-descriptor>
<cookie-path>/analytics</cookie-path>
</session-descriptor>
</weblogic-web-app>
4) We have added virtual-directory-mapping tag; After adding virtual directory mapping tag, the code in weblogic.xml is
<?xml version = '1.0' encoding = 'US-ASCII'?>
<weblogic-web-app xmlns="http://xmlns.oracle.com/weblogic/weblogic-web-app">
<session-descriptor>
<cookie-path>/analytics</cookie-path>
</session-descriptor>
<virtual-directory-mapping>
<local-path>D:/virtualdirectory</local-path>
<url-pattern>/images/*</url-pattern>
<url-pattern>*.jpeg</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
5) We have created a folder virtualdirectory under D: drive. And then created a folder images within folder virtualdirectory.
6) Then we have placed an image (lets say) test.jpeg within image folder.
7) Restarted all BI services,
8) Now when we try to access URL http://localhost:9704/analytics/images/test.gif. Now we are able to see the image, it’s working perfectly fine.
If we paste the above URL in browser it will automatically displays the image without any authentication. So our requirement is, on pasting the URL in browser first it should redirect to OBIEE homepage and when authentication is done then it should display the image.
Request you to please advise with your inputs.Why did you modify analytics.ear ?
Should'nt you make changes here : Middleware_Home>\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1
\analyticsRes\WEB_INF\web.xml
Follow this note : OBIEE 11g: How To Access Custom Files Through URL By Creating Virtual Directory In Weblogic Server? [ID 1408240.1]
And you should be able to deploy that virtual directory and access it after authentication.
HTH,
SVS -
Problem in installing GoldenGate Director on weblogic 12c
hello friends,
we have a server with weblogic 12c and a basic domain namely "base_domain" on it.(i have no earlier experience about weblogic).its path is "D:\Oracle\Middleware_HOME\wlserver_12.1"
i can start its AdminServer and we can login to its console.
now i want to install GoldenGate Director Server.but in installing process when i set Weblogic location it gives me error :
"Please Select a valid weblogic install Directory"
i tried all of these paths :
"D:\Oracle\Middleware_HOME\wlserver_12.1"
"D:\Oracle\Middleware_HOME"
"D:\Oracle"
but the error remains yet.
i installed weblogic on another machine but nothing changed.
another thin is that i checked all places that oracle documents tells that should be updated
i mean :
1 Update the registry.xml file in Weblogic home directory to point to the
correct WebLogic Server home directory.
2 Update all of the scripts under %WLS_SERVER_HOME%/server/bin and %WLS_
SERVER%/common/bin to point to the correct WebLogic Server home directory.
3 Update the .product.properties file under %WLS_SERVER_HOME% to point to the
correct WebLogic Server home directory.
1 & 2 are correct (i think) but i couldn't find third one "product.properties"
please help me.
Whats the problem?
weblogic Servers : Windows Server 2008 64-bit SP2 and Windows Seven Ultimate 64bit
Weblogic version : oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win32
GoldenGate Director : gg-director-serversetup_win_v11_1_1_1_0_001You should specify the middle-ware home direction.
The error normally caused by the wrong version installed, which doesn’t have the correct registry.xml in MW_HOME. I met this problem in the past which is because I installed a dev version of WLS in zip file.
After I install the installable version( I think it is the same version you used: oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win32.exe of WLS, it works fine. -
Virtual hosting in Weblogic 6.0
hi,
I have created a virtual host with the name MyVirtualHost and VirtualHost names
as mysite , in wl6.0 using the admin console.
I have cofigured DefaultWebApp_myserver as the default web application.I checked
the config.xml file and an entry has been made in it <VirtualHost
DefaultWebApp="DefaultWebApp_myserver"
Name="MyVirtual Host"
PostTimeoutSecs="20"
Targets="myserver"
VirtualHostNames="mysite"
/>
How do I access it?
I tried http://mysite and http://mysite:7001 but I get the default "page cannot
be displayed " page with IE.
Any Help?
Thanx
SunilNot quite sure what the question is, but the answer most likely rests in wl 6.0 docs under "virtual
hosting".
Gene
"Virendar Rana" <[email protected]> wrote in message news:3a7202b7$[email protected]..
> I have multiple high-level DNS domain for which I want to setup Virtual Hosting in a single
Weblogic Server 6.0?
-
Virtual Directory with struts-tiles
is have serious problems in configuring struts-tiles with virtual-directories for local developement. I have got my tiles-def.xml deployed in my ear. And i have got virtual-directory mapping, which works great, but not with tiles, because i want to include the jsp in my tiles-def.
is this possible? Does anybody have an experience?
Thanks heaps.A few methods that come to mind off hand would be:
1) Make an app on your server act as a proxy to the other app. That is, make a Servlet mapped to all URLs in the context. The servlet simply makes a corresponding request to the other server passing all pertinent information from the originating client. Your servlet then reads the response and pipes it directly to the response object
2) Try setting up a <context> element with the docBase attribute set to the other server's docBase. The other computer would have to give your server read/write access to the directory of interest. Since your server would be actually hosting the application you would have to check on environment and resources to make sure any required settings are duplicated properly.
3) Have the other application hosted on a different port, and your firewall map that port to their server and your port to your server. -
Using URL alias with Weblogic - How do you do it?
Bear with me I have zero experience with Weblogic.
We use Weblogic as a component of Hyperion Planning, meaning for Hyperion Planning weblogic is installed and acts as the java application AND webserver.
Currently our Hyperion Planning URL is http://servername:port as per security audit we need to use an alias so that users do not have straight access to the direct URL link.
Therefore we created on the DNS a URL alias BFS.companyname.com. Now I need to associate this alias with the Planning URL which is in weblogic.
I have logged into the weblogic admin console and see 'Virtual Hosts', I enter in the host name BFS.companyname.com and select the target which is the Hyperion Planning workspace (http://servername:port) apply changes yet nothing occurs.
If anyone has done a URL direction could you please post the instructions on how to do so...thanks
JTSJust to share this will all. The URL alias redirection is done within Apache webserver and not the Weblogic program.
Edit the httpd.conf file with this information below:
1. Configure Apache to listen on port 80:
a. Back up the configuration file, e:\Hyperion\common\httpServers\Apache\2.0.52\conf\ht tpd.conf
b. Add "Listen 80" to the Listen section.
c. In the Virtual Hosts section, (around line 955), uncomment the line, "NameVirtualHost *:19000"
d. Add "NameVirtualHost *:80"
e. Uncomment the "<VirtualHost *:19000>" code block, down to "</VirtualHost>"
f. Edit and add the following block to Virtual Hosts
<VirtualHost *:80>
ServerName www.myserver.com
DocumentRoot e:/Hyperion/common/httpServers/Apache/2.0.52/htdocs
</VirtualHost>
g. Restart Apache.
2. Redirect Web Page
a. Create a page in the virtual web directory, index.html that contains the following html code:
<html><head>
<meta http-equiv="Refresh" content="0; url=http://myserver:19000/workspace/index.jsp">
</head><body>
</body></html>
b. Have someone in NSE alter or create a DNS entry that redirects "hyperion" to the appropriate IP address. The default page (index.html) on the default port (80) will execute the redirect in the html document above, launching the workspace login screen.
JTS -
Multiple Websites or virtual directories in IIS
Hi,
I am kind of confused by the doc:
http://e-docs.bea.com/wls/docs70/plugins/isapi.html#109058
multiple Websites and virtual directories are totally different things.
I am assuming here is talking about the virtual directory. But when I tried to follow the steps to set the Application Protection (last step) I got a popup warning says:
COM+ was unable to talk to the Microsoft Distributed Transaction Coordinator.
what's that mean? how can I set it?
ThanksHi Teser,
I'm glad you wrote this post, because I've been struggling with this beast for the better part of a day now. I find the documentation to be misleading, confusing and poorly written.
I hope that someone can enlighten regarding this one, 'cause I am getting the same error. In the meantime I am trying to find out the meaning of this message and will post it if I find it.
Regards -
SWSE logical profile apply don't crete virtual directories
Hello,
I have installed Siebel 8.2 server on my Windows 7 machine.
I have completed install &configuration for Gateway Name Server, Siebel Enterprise Server, Sieber Server & SWSE.
All servers & Oracle database services are running.
After applying SWSE logical profile virtual directories are not getting created in IIS.
PFB configuration used while applying SWSE logical profile.
AppServerHostName=windows7test
ConfigMode=VERT
ConfigTask=ConfigureSWSEPhysical
current_section=
current_step=Response
DeployedLanguage=ENU
DoubleQuote="
eappscfgExists=C:\siebel\8.2.2.0.0\ses\gtwysrvr\admin\Webserver\eapps.cfg
eappsprofile=C:\siebel\8.2.2.0.0\ses\gtwysrvr\admin\Webserver
EnableVirtualHosts=false
EnterpriseServer=
EVTWelcome=Configuration Wizard Hint: Siebel Bookshelf provides searchable documentation. For EVT command-line help run evt -? or EVT -h.
first_section=InitialSetup
first_step=MainTask
GatewayAddress=
GatewayCreateDefaultRead=
GatewayUseDefaultRead=
HostName=windows7test
LoadBalancerOption=SingleServer
LoadBalancingServer=windows7test:2321
MainTask=Create
OperatingSystem=windows 7
OSDirSeparator=\
OSType=x86
RequestComponent=SRMSynch
RequestServer=
SCBPort=2321
SiebelBinDir=c:\siebel\8.2.2.0.0\sweapp\bin
SiebelDbsrvrRoot=c:\siebel\8.2.2.0.0\sweapp\dbsrvr
SiebelEncryption=
SiebeLibDir=c:\siebel\8.2.2.0.0\sweapp\lib
SiebelInstalledDir=c:/siebel/8.2.2.0.0/sweapp
SiebelLanguage=ENU
SiebelLogArch=
SiebelLogDir=
SiebelLogEvents=
SiebelLogFile=
SiebelMaxThreads=
SiebelMsgDir=c:\siebel\8.2.2.0.0\sweapp\locale\enu
SiebelPassword=
SiebelProgName=
SiebelRoot=c:\siebel\8.2.2.0.0\sweapp
SiebelRootParm=-h c:\siebel\8.2.2.0.0\sweapp
SiebelTableOwner=
SiebelTempDir=c:\siebel\8.2.2.0.0\sweapp\temp
SiebelUser=
SiebelVersion=8.2.2 SIA [22314] ENU
SWSERoot=c:\siebel\8.2.2.0.0\sweapp
SWSEServer=c:\siebel\8.2.2.0.0\sweapp\Admin\Webserver
TraceLevel=1
UnicodeEnable=
WindowsSystemRoot=C:\Windows\system32
I am logged in as Admin user of my windows 7 machine.
I have provided read/write permission on entired C:\siebel directory for windows Admin user as well as IIS_USRS.
IIS version is 7.5.7600.16385.
Please help me dig down what may be going wrong.
Thanks,
HarshalHello,
As I see this version of IIS comes as a default with Windows 7.
I tried to look how it can be downgraded to IIS 6 but no help.
So can you please tell me how we can user siebel web services in such case?
Is there any other web server component in siebel that we can use instead of IIS or any settings in IIS 7?
Thanks,
Harshal -
Need to establish Connection between CRM and Virtual Directories.
Dear All,
I am working for Telecom project.
I have one requirement that we need to establish Connection between CRM and Virtual Directories.
This is existing in Access management system.( SAP EP environment )
The basic requirement is, with SAP EP environment we are integrating 8 different application. But for all this Application we have a one more system called Access management system (like Basis in Sap). This will validate the user access and BP(Business Partner ) data for users who logon to a different respective application. For all this applications Company data (Master Data) has to provide from CRM and the changes took place for Company data in CRM will be updated in to Virtual Directories .For this service we need to establish Delta mode connection between SAP CRM and Virtual Directories.
Which is existing in Access management system .
Do we have any standard connectors from SAP CRM to connect and who we can achieve this .
Please let us know..Certainly there will be a reward points
Thanks & regards.
BNPTry posting this question on the BPA Suite forum - http://forums.oracle.com/forums/category.jspa?categoryID=194
-
Windows IIS virtual directories
I'm setting up CPS and Contribute 3 on a large site. Users in
different departments have access to specific folders that contain
their pages. What I can't seem to be able to do is to add virtual
directories to the users' list of folders to edit (though I really
just want them to be able to link to files in those virtual
directories). The virtual directories contain document libraries
(agendas, minutes, reports, media releases) that are maintained by
another system, so it seemed like a good idea to keep those folders
out of the root folder of the site that the CPS manages. But those
virtual directories don't show up in the list of folders to allow
users to edit. Has anyone run into this problem and found a way
around it? I could just drop the virtual directory idea if that's
the only way.
Tom Benjamin
Web Development Analyst
Capital Regional District, Victoria, BC, CanadaHi,
If NDES is the only CA role service on this server, this problem is expected. Because NDES requires the installation of the Certification Authority Web Enrollment role service on the same Server.
The Certificate Authority Web Enrollment pages are needed since the NDES IIS application is a virtual directory underneath the Web Enrollment pages (CertSrv).
Hope this helps.
Regards,
Bruce
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Who is VERY strange is that (in the "Thomas Larsen" configuration so without installing the "Web
Enrollment pages") ... we can access to the admin page with the url http://serveurNdes/certsrv/mscep_admin" !!! How is it possible !! -
Restore the deleted extended IIS web site into Virtual directories
Hi,
i deleted the IIS site from virtual directories and as well from IIS. But still i can see the extended web site zone in the Central administration, General Settings from the remove SharePoint from IIS web site. now question is there any way i can restore
the deleted iis site zone any how?
ThanksHi Trevor,
Thanks for your answer. i need some suggestion regarding on going issue. First i have created a web application at port 80 when it was in singer server and then i extended to 443 and 80 in multi-tier farm as you can see in the below image
And then i deleted IIS site from IIS itself and from Virtual directories as you can see in the below picture. Then i blinded the "SharePointDemo-80" site with host header at port 443 With default zone AAM. now i can access the site well but problem
is if i want to deploy any custom solution, getting error "The web.config is invalid on this IIS web site: "C:\inetpub\wwwroot\wss\VirtualDirectories\demoportal.bbcat.local80\web.config. " and also crawler is not crawling any items. my
understanding is, as there is no IIS site into virtual directories obviously will throwing error. Usually first i create web application at different port (example 8080) and then extend the application to 80 or 443. As i have already place this web application
and did customization, what will be the best way to handle this situation?
Thanks in advanced!! -
Hi ,
Is it possible to have different vartual directories for different
applications ? Or all the applications must be deployed somewhere under
wblogic.httpd.documentRoot ?
Ideally I want to create different virtual directories for different
application. For example :
/appDir1/ = c:\myapplication\application1
/appdir2/ = c:\anotherappliaction\application2 etc.
Thanks
Today, this is not supported. Virtual directories and virtual hosting will
be supported in our next major release.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"Chiranjib Misra" <[email protected]> wrote in message
news:[email protected]..
> Hi ,
>
> Is it possible to have different vartual directories for different
> applications ? Or all the applications must be deployed somewhere under
> wblogic.httpd.documentRoot ?
>
> Ideally I want to create different virtual directories for different
> application. For example :
> /appDir1/ = c:\myapplication\application1
> /appdir2/ = c:\anotherappliaction\application2 etc.
>
> Thanks
>
Maybe you are looking for
-
RoboHelp 10: Imported Topics Not Showing Up in Project View
Hello, Here is my issue: 1) I import files via the project view (right click > Import > Select HTML files). 2) Files are "imported", including related images. 3) Although the folders in which the images are located are imported and shown in the proje
-
Weird keyboard behaviour in TO; field
My keyboard behaves very weirdly when I try to enter a second address to the To: field. It will type multiple characters like: aararararararararararararararararararararararararar when I hit the letter a once followed by the delete key. I can not ente
-
Any reason I cannot sign onto AOL without getting kicked off with an error message?
-
Can i just use photoshop cs4 to rotobrush footage?
there is this new feature I have seen in after effects cs5 called rotobrush. at first glance it appears to be a photoshop selection tool that has been ported over to after effects. is this correct? if so can i just use the video features in photoshop
-
How to get top left stage corner coordinates after resize?
hi, is there maybe a way to get top left stage corner coordinates after resize? or maybe get original stage size before resize? so i can calculate it. i know that you can collect the width and height before it is resized but is it possible after? ---