SetRendered(true) not working for an LOV

Hi,
I have a dropdown(soc1) in my page which has three values : A, B and C. Below that drop down are three LOVs (say ilov1, ilov2 and ilov3), which are to be rendered dynamically based on the values selected from the dropdown. i.e. if I select A, then ilov1 has to be rendered, if I select B then ilov2, if I select C then ilov3 has to be rendered. I have used the below piece of code in a backing bean :
I have set the rendered property for ilov1, ilov2 and ilov3 as false in my jsff page. And I have set AutoSubmit property to true for soc1.
The below method is invoked through the valueChangeListener when I select a particular value from a drop down (soc1).
*public void setRendered(ValueChangeEvent event){*
String str = (String)valueChangeEvent.getNewValue();
*if (str.equalsIgnoreCase("A")) {*
getIlov1().setRendered(true);
getIlov2().setRendered(false);
getIlov3().setRendered(false);
*} else if (str.equalsIgnoreCase("B")) {*
getIlov1().setRendered(false);
getIlov2().setRendered(true);
getIlov3().setRendered(false);
*} else if (str.equalsIgnoreCase("C")) {*
getIlov1().setRendered(false);
getIlov2().setRendered(false);
getIlov3().setRendered(true);
AdfFacesContext.getCurrentInstance().addPartialTarget(ilov1);
AdfFacesContext.getCurrentInstance().addPartialTarget(ilov2);
AdfFacesContext.getCurrentInstance().addPartialTarget(ilov3);
If I debug the code, I can see the control passing through this method in the desired manner. It is executing the above code correctly as per the condition provided. But the Lov is not rendered on the page.
Can anyone please let me know the solution for the above problem ?
Thanks in advance.
-Kavitha

Thanks John. This worked. Am just curious to know why it didnt work with Rendered. Any particular reason ?
-Kavitha

Similar Messages

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

Cascading Select Lists - Not Working for me

I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
     select state_code || ' - ' || state_desc d, state_code r
     from tbk_state
     where country_code = :P6_COUNTRY_CODE
     order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?

Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti

OC4J JSP Debugging not working for all the jsps

Hi,
Initially I was not able to debug jsps using Eclipse and OC4J. The jsp debugging started working once I made the below changes:
1) global-web-application.xml is modified
Changed the attribute development="true" in orion-web-app
Added the below init param for the JspServlet
<init-param>
<param-name>debug</param-name>
<param-value>class</param-value>
</init-param>
If the jsps are present in a sub directory under the webcontent none of the breakpoints are working. I am still be able to view the jsp pages on the browser.
Tools: Oracle 10g Application Server Standalone version(10.1.3.5.0), JDK5, Windows XP, Eclipse Indigo
Project Structure:
Test (Eclipse Dynamic Web Project)
-WebContent
Sample.jsp ( Breakpoints are working)
-subF (Folder)
SubSample.jsp (Breakpoints are not working)
-WEB-INF
web.xml
Debugging worked for http://localhost:8888/Test/Sample.jsp
Debugging not working for http://localhost:8888/Test/subF/SubSample.jsp
Any help is highly appreciated.
Regards
Danny

This tells there is not enough main memory (not disk space) for the program to run.
- You can look the dump in ST22, it will have suggestions on increasing the ROLLAREA??, you can forward that to Basis.
- Most likely you will not have any more memory to assign so the above may not be feasible. Try to rework your query so it works with less data.

ValueChangeListener is not working.for disable property

valueChangeListener is not working for disable property with following details. Requirement is to enable to date if from to date is entered.
Field 1:
<af:inputDate value="#{bindings.PrintFromDate.inputValue}"
label="#{bindings.PrintFromDate.hints.label}"
required="#{bindings.PrintFromDate.hints.mandatory}"
shortDesc="#{bindings.PrintFromDate.hints.tooltip}"
id="id2" autoSubmit="true"
*valueChangeListener="#{reprintBean.enableToDate}">*
<f:validator binding="#{bindings.PrintFromDate.validator}"/>
<af:convertDateTime pattern="#{bindings.PrintFromDate.format}"/>
</af:inputDate>
<af:inputDate value="#{bindings.PrintToDate.inputValue}"
label="#{bindings.PrintToDate.hints.label}"
required="#{bindings.PrintToDate.hints.mandatory}"
shortDesc="#{bindings.PrintToDate.hints.tooltip}"
id="id1"
*disabled="#{!requestScope.enableToDate}"*
*partialTriggers="id2"*>
<f:validator binding="#{bindings.PrintToDate.validator}"/>
<af:convertDateTime pattern="#{bindings.PrintToDate.format}"/>
</af:inputDate>
public void enableToDate(ValueChangeEvent valueChangeEvent) {
System.out.println("IN enableToDate");
if (valueChangeEvent.getNewValue() != null) {
FacesContext context = FacesContext.getCurrentInstance();
System.out.println("Enable to Date");
context.getExternalContext().getRequestMap().put("enableToDate",true);
Please suggest me what is wrong on this.
Edited by: SrinivasA on Jan 28, 2011 5:34 PM

I still not able to achive this. (null the to date value if the FromDate has changed)
<af:inputDate value="#{bindings.PrintFromDate.inputValue}"
label="#{bindings.PrintFromDate.hints.label}"
required="#{bindings.PrintFromDate.hints.mandatory}"
shortDesc="#{bindings.PrintFromDate.hints.tooltip}"
id="id2" autoSubmit="true"
*binding="#{reprintBean.fromDate}"*
*valueChangeListener="#{reprintBean.enableToDate}"*>
<f:validator binding="#{bindings.PrintFromDate.validator}"/>
<af:convertDateTime pattern="#{bindings.PrintFromDate.format}"/>
</af:inputDate>
<af:inputDate value="#{bindings.PrintToDate.inputValue}"
label="#{bindings.PrintToDate.hints.label}"
required="#{bindings.PrintToDate.hints.mandatory}"
shortDesc="#{bindings.PrintToDate.hints.tooltip}"
id="id1"
disabled="#{bindings.PrintFromDate.inputValue eq null}"
binding="#{reprintBean.toDate}"
*partialTriggers="id2">*
<f:validator binding="#{bindings.PrintToDate.validator}"/>
<af:convertDateTime pattern="#{bindings.PrintToDate.format}"/>
</af:inputDate>
Value change method:
public void enableToDate(ValueChangeEvent valueChangeEvent) {
*setToDate(null);*
This method is not able to reset the to date value to null. Please help to find the issue here.
Edited by: SrinivasA on Feb 1, 2011 5:12 PM

Out of office replies in Exchange 2013 not working for external recipients

Hi,
Few days ago a couple of company workers went to vacation. They set up OOF automatic replies in OWA 2013. However automatic replies are not working for external recipients (outside of company). Internal users (company users) receive OOF notification.
I'm using smart host in sender connector configuration (SMTP server of internet provider) to deliver emails. Any clues about this problem ? Please find below part of the transaction log. For testing purposes i set up administrator account
to be on vacation.
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
DROP     ROUTING
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
TRANSFER ROUTING [email protected]
{[email protected]}             Automatic reply: vacation test
FAIL     SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test

Hi Informus,
Please check if it is allowed in AllowedOOFType of the Remote Domain *
In Exchange 2013, the only way to see or change the current configuration for automatic replying and forwarding to the Internet is via the Exchange Management Shell (EMS) with PowerShell commands.
To get the currently configured Remote Domains, use:
Get-RemoteDomain
Name                           DomainName
AllowedOOFType
Default                        *
External
Get-RemoteDomain Default | fl AllowedOOFType, AutoReplyEnabled, AutoForwardEnabled
AllowedOOFType     : External
AutoReplyEnabled   : False
AutoForwardEnabled : False
To change the settings, use the Set-RemoteDomain command.
Enable automatic replies
Set-RemoteDomain -AutoReplyEnabled $true
Enable automatic forwards
Set-RemoteDomain –AutoForwardEnabled $true
Enable OOF for Outlook 2003 and previous (for Exchange 2007 and 2010 support)
Set-RemoteDomain –AllowedOOFType $ExternalLegacy
To change all these properties at once, you can use:
Set-RemoteDomain Default -AutoReplyEnabled $true –AutoForwardEnabled $true –AllowedOOFType $ExternalLegacy
Note:
Valid settings for the AllowedOOFType property are:
External
This is the default and only allows for the new style OOF messages as introduced in Outlook 2007.
ExternalLegacy
This settings allows for both the new style and old style OOF messages and needs to be set if you want to enable external OOF support for Outlook 2003 as well.
None
This setting doesn’t allow for the use of OOF messages at all (both internal and external).
InternalLegacy
This setting only allows for internal OOF messages to be sent for all Outlook versions.
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Clob is not working for bulk data files in PL/SQL XML program

Hi Odie,
we took your help to fix the our issue before
"https://forums.oracle.com/forums/thread.jspa?threadID=2238458&tstart=105"
working fine for : program is working for smaller size data.
Issue : now we have problem with the largr size data .
getting the below error:
Arguments
P_dir_name='/tmp'
P_file_name='CCBGO.COLO_CNG.RESPONSES.20120802.00054131826'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 8B
stat_high = 0
emsg:was terminated by signal 11
Appreciated for your earlier support.
Kindly suggest .
Many Thanks,
Ramesh.

Thanks ALex,
your are true it is concurrent program error ,
but it is working for small amount of data and generating the output and it is not working for larger data.
i have placed the code which i have used kindly suggest where i am going wrong.
i am calling the .rdf through the concurrent program, i've used the below query in RDF
select
BATCHHEADER
,BATCHTRAILER
,RqUID
,Severity
,PmtRefId
,StatusDesc
,ErrorDesc
,AsOfDate
,AsOfTime
,RqUID1
,SPRefId
from table(CL_CXFRFXFH_PKG.rcacknowledgments(:P_dir_name,:P_file_name));
kindly find the below code for the package CL_CXFRFXFH_PKG.
==========================
CREATE OR REPLACE package body APPS.CL_CXFRFXFH_PKG is
function rcacknowledgments (p_directory in varchar2, p_filename in varchar2)
return TRecordTable pipelined
is
nb_rec number := 1;
tmp_xml clob;
tmp_file clob;
rec TRecord;
begin
dbms_lob.createtemporary(tmp_file, true);
tmp_file := dbms_xslprocessor.read2clob(p_directory, p_filename);
rec.BATCHHEADER := regexp_replace(tmp_file, '.*<BATCHHEADER>(.*)</BATCHHEADER>.*', '\1', 1, 1, 'n');
rec.BATCHTRAILER := regexp_replace(tmp_file, '.*<BATCHTRAILER>(.*)</BATCHTRAILER>.*', '\1', 1, 1, 'n');
loop
tmp_xml := regexp_substr(tmp_file, '<\?xml[^?]+\?>\s*<([^>]+)>.*?</\1>', 1, nb_rec, 'n');
exit when length(tmp_xml) = 0;
--dbms_output.put_line(tmp_rec);
nb_rec := nb_rec + 1;
select RqUID, Severity, PmtRefId, StatusDesc, ErrorDesc, AsOfDate, AsOfTime, RqUID1, SPRefId
into rec.RqUID
, rec.Severity
, rec.PmtRefId
, rec.StatusDesc
, rec.ErrorDesc
, rec.AsOfDate
, rec.AsOfTime
, rec.RqUID1
, rec.SPRefId
from xmltable(
'/CMA/BankSvcRq' passing xmltype(tmp_xml)
columns RqUID varchar2(3000) path 'RqUID'
, Severity varchar2(3000) path 'XferAddRs/Status/Severity'
, PmtRefId varchar2(3000) path 'XferAddRs/Status/PmtRefId'
, StatusDesc varchar2(3000) path 'XferAddRs/Status/StatusDesc'
, ErrorDesc varchar2(3000) path 'XferAddRs/Status/ErrorDesc'
, AsOfDate varchar2(3000) path 'XferAddRs/Status/AsOfDate'
, AsOfTime varchar2(3000) path 'XferAddRs/Status/AsOfTime'
, RqUID1 varchar2(3000) path 'XferAddRs/RqUID'
, SPRefId varchar2(3000) path 'XferAddRs/SPRefId'
pipe row ( rec );
end loop;
dbms_lob.freetemporary(tmp_file);
return;
end;
end;
============================================
Many Thanks,
Ramesh.

RequestFocus() not working for JTextArea

requestFocus() is not working for JTextArea.
A validation message is displayed and when clicked on 'ok', requestFocus() does not work. Cursor is not shown in the text
area.
Any suggestions/solutions pls?

here is the sample code:
public boolean checkData()
String comment = commentArea.getText().trim();
if( comment.length() < MN_COMMENT || comment.length() > MX_COMMENT )
showError(COMMENT_ALERT);
commentArea.requestFocus();
return false;
return true;
Focus is lost. TextArea is in scroll pane. Scroll pane is contanined in a container pane and pane is for JDialog.
RequestFocus() is working for JRE 1.5.0_07. But its not working for JRE 1.5.0_0 and lower versions.

Sql Monitor is not working for forms10g

Hi All,
Sql Monitor is not working for forms10g.How can i solve this problems.
Regards
Gopinath M

using sqlmonitor i have traced the forms 6i (.fmx),in this case toad additional
software sql monitor is automatically added the frmbld.exe in application.
whatever i am doing in forms runtime the sqlmonitor provide the sql query.
for examble i am opening the lov with the help of F9.Now the sqlmonitor trace
the sql query for that lov item.so its very helpful to see the query without
the source(.fmb).
Now the problem is the sqlmonitor is not added the iexplore.exe in application.
because it added frmbld.exe only not for iexplore.exe.but the 10g forms are
running from the explorer.is there any other forms trace method is available
pls kindly guide to me.

SPSecurity.RunWithElevatedPrivileges Not Working for Read Only Permissions Users

I have the following code in a method that generates tabbed web parts on any page in SharePoint 2010.
The problem is that it will not work for users who have Read access only on a SharePoint site. It will work when those users have Contribute access.
So even though I have elevated permissions in the code it does not actually elevate the permissions at the point where it is needed.
if (panel != null)
try
using (SPLimitedWebPartManager wpManager = SPContext.Current.Web.GetLimitedWebPartManager(HttpContext.Current.Request.Url.ToString(), PersonalizationScope.Shared))
try
// Elevated previleges required for EXPORT and IMPORT. Else Users with normal read access will get errors.
SPSecurity.RunWithElevatedPrivileges(delegate()
// Retrieve the web part titles in the ConfigureTabs XML string for this tab.
var webPartTitles = from t in xDocument.Descendants("webPart")
where (string)t.Parent.Attribute("name") == (string)e.Item.DataItem
select (string)t.Attribute("title");
foreach (string wpTitle in webPartTitles)
foreach (System.Web.UI.WebControls.WebParts.WebPart webPart in wpManager.WebParts)
// Find the matched closed web part in WebParts collection
if (webPart.Title == wpTitle && webPart.IsClosed == true)
string errorMessage;
//ADD EXPORT PROPERTY
webPart.ExportMode = WebPartExportMode.All;
MemoryStream stream = new MemoryStream();
XmlTextWriter writer = new XmlTextWriter(stream, System.Text.Encoding.UTF8);
// Export the closed webpart to a memory stream.
wpManager.ExportWebPart(webPart, writer);
writer.Flush();
stream.Position = 0;
XmlTextReader reader = new XmlTextReader(stream);
// Import the exported webpart.
System.Web.UI.WebControls.WebParts.WebPart newWebPart = wpManager.ImportWebPart(reader, out errorMessage);
reader.Close();
writer.Close();
// Show the imported webpart.
panel.Controls.Add(newWebPart);
break;
catch (Exception ex)
// For debugging use only.
Label label = new Label();
label.Text = "Please check your XML configuration for error. " + Environment.NewLine + ex.Message;
panel.Controls.Add(label);
catch (Exception ex)
// For debugging use only.
Label label = new Label();
label.Text = "Please Check SPContext.Current.Web is not null. " + Environment.NewLine + ex.Message;
panel.Controls.Add(label);
This snippet of code was originally pulled from a microsoft technet article on creating Tabbed web parts "the correct way" but it doesn't work in all scenarios.
Is there a way to get this code working for Read/Visitors to a SharePoint site?

From initial observation what I see is that your SPLimitedWebPartManager is not created from an elevated web. Try like below
SPSecurity.RunWithElevatedPrivileges(delegate()
using(SPSite elevatedSite = new SPSite(SPContext.Current.Site.ID))
using(SPWeb elevatedWeb = elevatedSite.OpenWeb())
using (SPLimitedWebPartManager wpManager = elevatedWeb.GetLimitedWebPartManager(HttpContext.Current.Request.Url.ToString(), PersonalizationScope.Shared))
{ //Rest of your code
Geetanjali Arora | My blogs |

Photoshop extension building not working for cs6, works for the rest

I am building an extension for photoshop the manifest file is as below:
<?xml version="1.0" encoding="UTF-8"?>
<ExtensionManifest Version="4.0" ExtensionBundleId="Kit" ExtensionBundleVersion="2.0.0"
ExtensionBundleName="Kit" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ExtensionList>
<Extension Id="Kit.extension1" Version="2.0.0" />
</ExtensionList>
<ExecutionEnvironment>
<HostList>
<Host Name="PHSP" Version="[13.0,15.9]" />
<Host Name="PHXS" Version="[13.0,15.9]" />
</HostList>
<LocaleList>
<Locale Code="All" />
</LocaleList>
<RequiredRuntimeList>
<RequiredRuntime Name="CSXS" Version="3.0" />
</RequiredRuntimeList>
</ExecutionEnvironment>
<DispatchInfoList>
<Extension Id="Kit.extension1">
<DispatchInfo >
<Resources>
<MainPath>./index.html</MainPath>
<ScriptPath>./Kit.jsx</ScriptPath>
</Resources>
<Lifecycle>
<AutoVisible>true</AutoVisible>
</Lifecycle>
<UI>
<Type>Panel</Type>
<Menu>Beauty Retouching Kit</Menu>
<Geometry>
<Size>
<Height>580</Height>
<Width>250</Width>
</Size>
<MaxSize>
<Height>580</Height>
<Width>250</Width>
</MaxSize>
<MinSize>
<Height>580</Height>
<Width>250</Width>
</MinSize>
</Geometry>
<Icons>
<Icon Type="Normal">./pictures/thumb/Icon.png</Icon>
<Icon Type="RollOver">./pictures/thumb/Icon.png</Icon>
<Icon Type="DarkNormal">./pictures/thumb/Icon.png</Icon>
<Icon Type="DarkRollOver">./pictures/thumb/Icon.png</Icon>
</Icons>
</UI>
</DispatchInfo>
</Extension>
</DispatchInfoList>
</ExtensionManifest>
I tried this code for photoshop CC and CC 2014, it works for both but I couldn't get it to run for cs6 it gives the below error from the extension manager:
so isn't Version="[13.0,15.9]" correct? why would it not work for cs6? thanks in advance.

Hi,
CS6 doesn't support HTML Panels but Flash ones, this should be the why the Adobe Extension Manager fails.
You might find help here (Flash): Creative Suite Extension Builder and here (HTML): Extension Builder 3
Davide Barranca
www.davidebarranca.com
www.cs-extensions.com

Activesync not working for Windows Phone with certificate

We have a new Exchange Server 2013 setup and using activesync. We have setup a policy to require simple password and to send an email to provision a device when it connects. Activesync is setup to use self signed certificates, this was
tested first on the Ipad. Certificate installed entered the settings and the device appeared in the quarantined devices list awaiting to be approved. This was also done on the Iphone and worked.
When putting the same certificate on the windows phone device it errored with there is a problem with {as.domain-name.net} and does not appear in quarantined devices screen.
I tested again with another Ipad and an android device and they work without an issue. Tested with a Windows RT device and got the same issue. If I look in the IIS log files I can see the windows device making a connection then when I presume
to be the error 500 at the end of the line.
This is not a user issue as I can use the same user on the various devices. The windows devices just do not want to connect. We have looked at the certificate but if it works for apple and android devices why does it not work for windows?
Is there any additional security settings that need to be turned on or off for windows phones? Is there something specific on the certificate what windows devices need that others ignore?

I did inital think it might be a widows phone issue but there are no other settings for me to use. I have also tested using a windows 8 surface and I get the same issue.
I have raised the event log level on the exchange server to expert and I have seen 2 messages when I try to connect.
I get Event ID 1100: Exhcnage ActiveSync device requests for your uses are being blocked. This problme frequently occurs when HTTP OPTIONS method is not allowed.
I know it is allowed as the test exchange connectivity worked and passed that test.
The other error Event ID 1309 ASP.NET warning. Part of the exception messge is DeviceTypeMissingOrInvalid
I have come across a comment that says for certificates to work you need to use windows intune or SCCM which we don't have. Do we know if this is true?

Live Preview is not working for me

Live Preview is not working for me. I've read many other forums and tried everything and I still get the same issue that everyone else has mentioned. I'm on Chrome Version 34.0.1847.116 m . I have multiple user profiles with Chrome so not sure if that makes a difference.
Adobe Edge team, for a lightweight browser that should be easy to use, this does not make it easy. Hopefully you can implement a fix soon that works for all cases as I was really looking forward to trying this out and I'm unable to.

I am having issues as well.
Running through the intro tutorials - Just the basic HTML tutorial files. When initiating live preview, I restarted Chrome as prompted for debugging, After restart the preview page loads fine a single time, works for about 10 seconds or so and then disconnects. I cannot get it to reconnect without restarting the program, but the same thing happens.
Live Preview Error: Unable to Load Development Page
The live preview icon remains orange - as if connected, but no changes write to the preview window in HTML or CSS.
Ive seen the other threads, but none of those items seem to fix my issue.
Anything I can do here besides wait for update? Love the basic product - the editing features are awesome, but until live preview + reliable FTP is set, I'll probably stick with current coding solutions.
Running an Imac OSX 10.9.2
Chrome 34.0.1847.116

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

SetRendered(true) not working for an LOV

Similar Messages

Maybe you are looking for