Setting an ALERT for out of range limits in a variable

I am looking for a function that will allow me to do the following:
I have 3 variables each with their own range of limits for normal operation.
variable 1 has to be between 97 - 100
variable 2 has to be >70
variable 3 has to be between 60 - 85
If any of the variable goes out of their respective range, an alert should be displayed on the screen.
Any suggestions.
Thanks

Hey Lynn
Thanks again for your help. I have attached my VI in the message. I am having a small gliche though.
I want the LED to light up when the the value coming out of the "In Range and Coercion" is 0 and not 1.
Any suggestions.
Attachments:
Untitled.vi ‏26 KB

Similar Messages

Can you set an alert for birthdays in Addressbook and iCal?

When I migrated from Palm Calendar to iCal, my calendar had my birthdays in it repeating each year and with a 7 day alert so I could send a card or get a present in time.
I see you can list a birthday in Addressbook and set the iCal pref to show them which is at first glance very cool and green but when I open the birthday event in iCal I don't see any way to set an alert which is a big limitation.
If I can't set alerts, then the Addressbook/iCal birthday syncing is kind of pointless and limited, unless I'm missing how to set alerts.

Hi Steven,
This is one of the reasons why I wrote Dates to iCal.
As well as automatically syncing birthday dates from Address Book, Dates to iCal can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries.
Best wishes
John M
<hr/>As I sell software on my site and ask for donations, the Apple Discussions Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Calendar: Setting an alert for more than "2 days before"?

I'm sure there is a way to set an alert for more than "2 days before" when creating a new event. Every PDA out there allows infinite options in this regard, yet I can't do this on the iphone?
How can set my iPhone calendar alerts for "7 days before" or something to this effect? Can I change the defaults? What can I do?

You can set the reminder in your computer, instead of on the iphone as the iphone's longest option is two days.
From the manual:
"Alert time—from five minutes to two days before the event "
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

Is there a way to set an alert for every event in a single calendar?

Hi all,
Is there a way to globally set an event in just one of the calendars showing in iCal?
For example, I have a "Birthday" Calendar with a bunch of birthday events. I want to set the alert for all of them to, say, noon, without having to edit each and every one.
Thanks!
Greg

To generally add an alarm to all events in a specific calendar you would need to program an Automator Workflow that passes all events of the calendar to an Applescript that adds the alarm.
For your birthdays problem is a predefined solution iCal: If you enter the Birthdays on the cards in your Address Book, and enable the "Show Birthdays Calendar Flag", then you will receive automatic email notifications of upcoming birthdays.

I am using iCal on my iMac, iPad and iPhone using iCloud and when I set the alert for 1 day before and the second alert to 1 hr before, then save the alerts switched. Was is this happening?

I am using iCal on my iMac, iPad and iPhone and when I set the alert for 1 day before and the second alert to 1 hr before, then save the alerts switched. Was is this happening?

http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps

Setting Up Alerts for Always on Availability Groups Failover

Hi Folks,
In SQL Server 2008R2 we set up alerts for Mirroring failover using WMI Alerts. As Like this.
Now we need to configure similar alerts for Always on Availability Groups(AAG) in SQL Server 2012, but it seems that there is no such WMI Alerts or any standard way to set up the alerts for getting notified for AAG Failover. Click
Here
Should I manually Create a SQL Agent Job using
these DMVs and schedule it at frequent Interval to get notified about any AAG failover or is there any standard way as for mirroring Failover alerts? Any suggestion or help is appreciated.
Pranshul Gupta

Maybe you wanna have a look at this:
http://blogs.msdn.com/b/sqlalwayson/archive/2012/02/13/monitoring-alwayson-health-with-powershell-part-1.aspx
http://blogs.msdn.com/b/sqlalwayson/archive/2012/02/13/monitoring-alwayson-health-with-powershell-part-2.aspx
http://blogs.msdn.com/b/sqlalwayson/archive/2012/02/15/monitoring-alwayson-health-with-powershell-part-3.aspx
http://blogs.msdn.com/b/sqlalwayson/archive/2012/02/15/the-always-on-health-model-part-4.aspx
Bodo Michael Danitz - MCT, MCITP - free consultant - performance specialist - www.sql-server.de

How to set OEM alerts for concurrent programs

Hi,
We are using OEM 10g gridcontrol for monitoring.
i am new to OEM, now i have a task to set up alerts for concurrent programs(which are running more than 30mins).
can any one provide step by step process to setup alerts.
Thanks,

Here is how to enable your alerts.
1. From the Mobile Email application, select the desired email account then press the center of the 5-way navigation pad to choose Select.
If prompted enter the username and password, then press the center of the 5-way navigation pad to choose Sign In.
2. Press the right soft key to choose Options.
3. Select Settings then press the center of the 5-way navigation pad to choose Select.
For AOL / AIM select Preferences.
4. Select the desired setting then press the right soft key to choose Save.
To disable the email alerts:
Select Disable or Never.
To enable email alerts:
Select Enable or Always.
To receive email during a desired time interval:
Select Only During then enter the desired time interval.
This setting may not be available on all handsets or accounts. Hope this helps

Can we set an Alert for JDBC Connection Failures ?

Hi friends ,
                  Can we set an alert for JDBC Connection failure as mail as well as Alert ?
                  I am using JDBC Sender adapter to read the data from sql server table.
                  I am not using BPM .
                  I want to set an alert and mail to respective person when JDBC Connection failure .
                  If XI trying to read a database if connection failure or connection properties lost it won't come ti Integration engine itself right ?
                 I assume as we have to set alert at system level .
                Can you please give me the step by step details to set this kind of alerts ?
                  Expecting your reply asap .
Best Regards.,
V.Rangarajan

Renga rajan,
This is what I tried to explain in yuor previous threads.
>>>If XI trying to read a database if connection failure or connection properties lost it won't come ti Integration engine itself right ?
In such cases, you will get <b>an error at adapter level</b> and the msg wont come into IE.
>>>I assume as we have to set alert at system level .
If you are above SP 14 in XI3.0, then you can raise alerts for adapter errors also.
No special config required for this.
To understand this, give it a try and you will get the concept.
Regards,
Jai Shankar

Can I set up alerts for multiple email accounts? (...

I have two hotmail accounts set up on my Nokia E71.
For some reason I only get alerts for the second account I added.
I have gone through every setting/preferance menu I can think of to see if there's a difference but can find none.
Can anyone think of what I'm missing? If anything, I would have expected an alert for the original email.
I want to make sure I am getting the maximum benefit and use out of this phone and email alerts would be great (I phoned my carrier's tech support and they said the E71 has NO alerts for any mails so that was clearly incorrect)
Message Edited by mobilekristy on 11-Jun-2009 07:07 PM

Are you using the built-in email client?
If you are, double check the "New Email Alerts" option. This is under <Settings> -> <E-mail> -> <choose mailbox> -> <User Settings> -> <New Email Alerts>

Adjusting curves for "out of range" keyframes

Is it possible to view and edit keyframes in the timeline graph editor
that are out of range of the composite duration (negative frame
or greater than final frame)?
I have been adjusting the beginning and end of the active work area,
and extending the overall duration of the composite in order to
keep out of range keframes within the timeline graph editor view.

Is it possible to view and edit keyframes in the timeline graph editor
that are out of range of the composite duration
Nope, unfortunately not. Since the GE is just a different timeline representation for better or worse, it shares the same limitations.
Mylenium

Have problem setting Email alerts for Calendar events. Warning message says I need to set up a card in Contacts with my email. I do but it doesn't recognize it. How do I indicate the email I want alerts sent to?

The system of setting up email alerts for Calendar events worked fine in Snow Leopard but since I upgraded to Mt. Lion Calendar won't let me set email alerts. When I try, I get an error message saying I need to set up a card in Contacts for my email. I have a card set up in Contacts for both of my email addresses but it doesn't recognize them. Perhaps the name I have on the card doesn't match a name that Calendar is looking for. Calendar doesn't seem to have a way in Preferences or elsewhere to indicate the email I want alerts sent to. Any ideas how I can get this system working again? Thanks for your help.

You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
See if another contact is marked as this is my card.

How to set up alerts for mobile email on Samsung Reality?

Hi,
I was wondering how we could set up to receive automatic alerts for new incoming emails on a Samsung Reality?

Here is how to enable your alerts.
1. From the Mobile Email application, select the desired email account then press the center of the 5-way navigation pad to choose Select.
If prompted enter the username and password, then press the center of the 5-way navigation pad to choose Sign In.
2. Press the right soft key to choose Options.
3. Select Settings then press the center of the 5-way navigation pad to choose Select.
For AOL / AIM select Preferences.
4. Select the desired setting then press the right soft key to choose Save.
To disable the email alerts:
Select Disable or Never.
To enable email alerts:
Select Enable or Always.
To receive email during a desired time interval:
Select Only During then enter the desired time interval.
This setting may not be available on all handsets or accounts. Hope this helps

How to set an alert for unauthorized ClearPass login

Q: As a network administrator, how do i set alerts for a unauthorized access to ClearPass server (via SMS or Mail) ?
A: A network admin would want to know, if someone unauthorized is trying to access the ClearPass server. The solution below explains, how a SMS/Mail alert can be set on ClearPass server for the same.
Manual to way for a admin to check ClearPass login is via Event Viewer. Here the Alert level is WARN for a invalid login.
However for an automatic alert, we need to take following steps:
In order to send alerts via Mail, we need to configure SMTP server on ClearPass
2. In order to send alerts via SMS we need to configure SMS gateway
3. Now once the Mail and SMS config is done, we need to set Alerts. For that we need to navigate to CPPM > Administration > Server Manager > Server Configuration > Cluster-Wide Parameters > Notifications
4. Here the system alert level is set to WARN (same for a Invalid login attempt) to capture unauthorized ClearPass login attempts.

Thank you for the code.
Is it correct to put that code under VALIDATE > run custome validate script, within the Properties box?
Because I tried it, and it worked only AFTER I typed a number onto the field.
Since my goal is to have the alert BEFORE, so if someone typed in a text, they should see the alert and correct themselves to type in a number instead.
Please clarify.
Thanks!

Can't set an alert for my Reminders

I have gone into reminders and set a new reminder (Things to do tonight) with 4 items in the list.
I have spent the last 20 minutes trying to set a time for the reminder to alert me/remind me but I can't for the life of me figure how to set an alert!
I feel like a retard ... clearly I'm just slow and it's looking me right in the face...
How do I set my reminder to remind me????

whitsey! wrote:
I have gone into reminders and set a new reminder (Things to do tonight) with 4 items in the list.
Each item in the list is a separate reminder.
Tap one, tap the i with a circle and set the date/time to be reminded.

Alerts for out-of-date content

I maintain dozens of web page for a large state
transportation agency. Is there a way in Dreamweaver to create web
pages so that if a particular piece of content (whether it is text
or a download) is out-of-date, an alert is sent to me by email to
update the page. The alternative is to go through every web page
regularly which will be very time consuming. Any suggestions would
be appreciated.

On 08 Mar 2007 in macromedia.dreamweaver, jrindone wrote:
> I maintain dozens of web page for a large state
transportation
> agency. Is there a way in Dreamweaver to create web
pages so that
> if a particular piece of content (whether it is text or
a download)
> is out-of-date, an alert is sent to me by email to
update the page.
> The alternative is to go through every web page
regularly which will
> be very time consuming. Any suggestions would be
appreciated.
Best bet is if you have time-limited material, put the
information in a
database and drive the pages off the database. Next best bet
is to
surround the material with conditional statements
(pseudocode):
<* if date > 12-25-2007 and date < 1-2-2008 *>
<h1>Don't Drink and Drive at New Year's</h1>
<p>Lorem ipsum dolor sit amet...</p>
<* endif *>
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/email.php

Setting an ALERT for out of range limits in a variable

Similar Messages

Maybe you are looking for