Adjusting curves for "out of range" keyframes

Is it possible to view and edit keyframes in the timeline graph editor
that are out of range of the composite duration (negative frame
or greater than final frame)?
I have been adjusting the beginning and end of the active work area,
and extending the overall duration of the composite in order to
keep out of range keframes within the timeline graph editor view.

Is it possible to view and edit keyframes in the timeline graph editor
that are out of range of the composite duration
Nope,  unfortunately not. Since the GE is just a different timeline  representation for better or worse, it shares the same limitations.
Mylenium

Similar Messages

  • Setting an ALERT for out of range limits in a variable

    I am looking for a function that will allow me to do the following:
    I have 3 variables each with their own range of limits for normal operation.
    variable 1 has to be between 97 - 100
    variable 2 has to be >70
    variable 3 has to be between 60 - 85
    If any of the variable goes out of their respective range, an alert should be displayed on the screen.
    Any suggestions.
    Thanks

    Hey Lynn
    Thanks again for your help. I have attached my VI in the message. I am having a small gliche though.
    I want the LED to light up when the the value coming out of the "In Range and Coercion" is 0 and not 1.
    Any suggestions.
    Attachments:
    Untitled.vi ‏26 KB

  • Enumerated Out-Of-Range Detection

    I'd like to solicit opinions and ideas on a LabVIEW technical issue. The objective is to have a subvi detect when it receives an out of range value on an input that is an enumerated type control. Of course one way is to change the enumerated type so that the first and last items are named Underrange and Overrange, and handle these cases. But I am looking for a way to do it without adding items to the enumerated type. The attached LLB illustrates what I am trying to do. If the Numeric input on the top level VI is set to a value of 22, the subVI runs with a value of 16. Note that the subVI has a property for Out of Range Action that is set to Ignore, but the value is still coerced.
    The LLB is in LabVIEW 7.1.  In LabVIEW 8.2 the behavior is different. There is apparently a bug in LabVIEW 8.2 that allows the Number of Items to change if an overrange value is input.
    Allen
    Attachments:
    Enumeration Range Demo.llb ‏41 KB

    There is no built-in elegant method since the numeric->enum coercion is something that obviously happens automatically. If you provide a subVI that has an enum input you have no way of knowing that somebody wired an integer to that input unless you use the "Underrange" and "Overrange" enum values to deal with that situation. From your subVI's perspective all that you see in your subVI is the enum. There's no way for you to know that the enum value was chosen that way because somebody wired a constant of, say, -1 to your subVI's enum input. The programmer could just as well have had a number/string->enum conversion routine that actually chose those enum values.
    The real question is whether or not you should be providing an "Underrange" or "Overrange" enum value. That depends on how your subVI gets used. Normally I don't create such values, and I would suspect most programmers also do not. The only time I do it is when I know the subVI is used in situations where the value would likely be coming from an integer or a string value like, when it gets read from a file. In the latter example I use a string->enum conversion VI, but I make sure that the enum has an "undefined" value in the case when I get an empty string or an incorrect string.
    As a side note and follow-up to my previous message, it's interesting to note that even though the "Out of Range" action can be set for an enum via a property node, that section does not exist on the property page for the enum (and sensibly so). Perhaps that property shouldn't even be selectable for an enum.

  • Data truncation: Out of range value adjusted for column

    I encountered the following error while working thru "Creating Your First LiveCyle ES Application" and have not been able to find a solution. Any assistance would be greatly appreciated.
    javax.ejb.TransactionRolledbackLocalException: Data truncation: Out of range value adjusted for column 'loanamount' at row 1; CausedByException is:
    Data truncation: Out of range value adjusted for column 'loanamount' at row 1
    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:247)
    at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:335)
    at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:166)
    at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:153)
    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:192)
    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:122)
    at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:624)
    at org.jboss.ejb.Container.invoke(Container.java:873)
    at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:415)
    at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:88)
    at $Proxy284.writeObject(Unknown Source)

    hmm, i have sloved the error already. I have make my longtitude double(40,20).

  • Curve 8310 error Unc.Exception: string index out of range: 0

    I'm getting the following error message: "Uncaught Exception: string index out of range: 0" and no way to clear that message.
    Could someone help me to fix it? Actually the only way to get BB-8310 back working is remove the battery.
    Thanks in adavance
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!!
    There's pretty much no diagnosing those -- they are the equivalent of the random errors in Windows for which tracing the root cause is fruitless. Basically, these are the last out in the programming code -- some event occurred for which there is no handler in the code. The fix is a code update that handles the event...but, again, knowing what the event is is pretty much impossible. So, there are a few things to try:
    Sometimes, the code simply becomes corrupt and needs to be refreshed -- just like a reboot:
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    If it won't boot up cleanly, then you may need to try Safe Mode:
    KB17877 How to start a BlackBerry smartphone in safe mode
    There might be an updated code set from the carrier -- check them via this portal:
     http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    The toughest possible cause is a badly behaving app. To find it, there are a couple of options. One is to see if you can read the log file:
    Go to the home screen. Hold down the "alt" key and type 'lglg'. (You will not see anything while you type).This will bring up the log file. Scroll down (probably many pages) untill you see a line that says 'uncaught execption'. Click on this line. The name of the app will be in the info. Alternative methods for bringing up the logs are in this KB:
    KB05349How to enable, access, and extract the event logs on a BlackBerry smartphone
    The other method is to remove apps one at a time, waiting a while in between (I usually recommend a week), until the problem ceases...thereby discovering the offending app. Still another method is to reload the BB OS cleanly, leaving some time between adding other apps onto the BB so as to be able to determine exactly which one is the cause.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Failure migrating wiki to Mountain Lion Server with wikiadmin, value is out of range for type integer

    We are trying to migrate our 10.6.8 wikis from the OS X Server to our new Mountain Lion OS X Server.  I am using "wikiadmin migration -r <collaboration directory> -g <wiki name>" to migrate each wiki individually. We have about 30 wikis in the old server, three of which fail to migrate, all with the same problem (below). The process runs successfully for a while, but ultimately fails and rolls back the transaction. It appears there is some problem trying to generate a unique filename, perhaps for some of the uploaded files?
    Has anyone else seen this error? large amount of pages, content, and attachments in these wikis and just recreating them in the new server would be a monumental task. Some of these attachments include videos and other large files, not sure if that might contribute to the problem.
    === wikiadmin migrate output log ===
    Aug 29 13:25:11 gslcwiki.local wikiadmin[54032] <Debug>: [PGCConnection:233 7e7e1180 +0ms] Executing query [INSERT INTO entity (uid, tiny_id, entity_type_fk, short_name, long_name, description, create_time, update_time, createdby_user_fk, updatedby_user_fk, ownedby_uid_fk, owner_entity_type_fk, is_hidden) (SELECT uid, tiny_id, entity_type_fk, short_name, long_name, description, create_time, update_time, createdby_user_fk, updatedby_user_fk, ownedby_uid_fk, owner_entity_type_fk, is_hidden FROM master_entity_scratch_20120829T132314 WHERE entity_type_fk='com.apple.entity.File')]
    Aug 29 13:25:11 gslcwiki.local wikiadmin[54032] <Debug>: [PGCConnection:181 7e7e1180 +151ms] Query result is [PGRES_FATAL_ERROR] rows returned=0/updated=
    Aug 29 13:25:11 gslcwiki.local wikiadmin[54032] <Error>: [PGCConnection:148 7e7e1180 +0ms] Error in TXN: Error executing query [INSERT INTO entity (uid, tiny_id, entity_type_fk, short_name, long_name, description, create_time, update_time, createdby_user_fk, updatedby_user_fk, ownedby_uid_fk, owner_entity_type_fk, is_hidden) (SELECT uid, tiny_id, entity_type_fk, short_name, long_name, description, create_time, update_time, createdby_user_fk, updatedby_user_fk, ownedby_uid_fk, owner_entity_type_fk, is_hidden FROM master_entity_scratch_20120829T132314 WHERE entity_type_fk='com.apple.entity.File')]: ERROR:  value "109120715161" is out of range for type integer
              CONTEXT:  PL/pgSQL function "uniquify_filename" line 7 at RETURN
              PL/pgSQL function "trg_update_entity_filename" line 23 at assignment
                        0   CoreFoundation                      0x00007fff93b67716 __exceptionPreprocess + 198
                        1   libobjc.A.dylib                     0x00007fff95aaf470 objc_exception_throw + 43
                        2   PostgreSQLClient                    0x00000001026ff9ae -[PGCConnection checkResultOK:forSQL:] + 360
                        3   PostgreSQLClient                    0x00000001026ffec3 -[PGCConnection executeQuery:] + 223
                        4   wikiadmin                           0x000000010269d586 wikiadmin + 66950
                        5   PostgreSQLClient                    0x00000001026ff5f7 -[PGCConnection transactionInBlock:onError:] + 147
                        6   wikiadmin                           0x000000010269cd86 wikiadmin + 64902
                        7   wikiadmin                           0x00000001026a025d wikiadmin + 78429
                        8   wikiadmin                           0x00000001026924c8 wikiadmin + 21704
                        9   libdyld.dylib                       0x00007fff912857e1 start + 0
                        10  ???                                 0x0000000000000006 0x0 + 6
    Aug 29 13:25:11 gslcwiki.local wikiadmin[54032] <Debug>: [PGCConnection:320 7e7e1180 +0ms] Executing update [ROLLBACK]

    Okay, so a little more detail for you…
    If I can manage to restart the server without the wiki service on, everything else seems to work fine (including the web service running the default home page) and "serveradmin fullstatus wiki" will report that the service is stopped.
    But as soon as I try to start the wiki service, it never finishes, and it prevents the web service from working properly anymore. i.e. I get a 502 Proxy Error instead of the OS X Server default home page. It's after the attempted wiki start that "serveradmin fullstatus wiki" starts to give the
    serveradmin[2373:707] outstanding requests are: (
            Command = getState;
            Module = "servermgr_wiki";
            Timestamp = "2012-10-25 16:22:15 +0000";
    error. And then I can't stop the wiki service - even "serveradmin stop wiki" gives the same "outstanding requests" message.
    This time I tried to stop the wiki from Server app and I got this error:
    An error occurred on the server while processing a command.
    The error occurred while processing a command of type 'getState' in plug-in 'servermgr_wiki'.
    If it's helpful at all, I've notice the following in my log files that seem related, but I have no idea how to fix - it almost seems lie the migration of the wiki failed from 10.7 to 10.8:
    collabd[767]: [CSConnectionPool:141 6a92000 +14027ms] Schema is STILL out of date (14 < 69) after launching wikiadmin, update failed! collabd will refuse to run until this is fixed.
    I'm really pulling my hair out over here, and have no idea what to try next?
    Anyone have any suggestions?
    Thank you!

  • Curves adjustment layer for greyscale images

    If you are editing a greyscale image, the curves adjustment layer is shown in "reverse" style (as you would expect to work with a CMYK image)  that that is awkward to work with.  If you use Image->Adjustment->Curves, you have the option to invoke the curve display in Light (0-255) or Pigment/Ink % in which the LIGHT does what is appropriate..   It would be nice to have the  ability to toggle the Light/Pigment in the Curves Adjustment layer. 
    I think I remember that, in the good old days of CS/CS2, you could alt-click on the gradient to alter the tonal direction of the curve.

    Woops... I just found that the Curves Adjustment layer flyout has a Curves Display Options that allows the setting - and it is sticky.  Sorry for the waste bandwidth.

  • Scale definition for theme is out of range

    Hi,
    I am getting the following error when viewing a FOI layer using mapviewer javascript API
    [oracle.sdovis.theme.pgtp] Scale definition for theme is out of range.
    Once I've got this error, I need to restart oc4j again in order for the map to come up.
    I've set the dimension info to -180<x<180, -90<y<90. I am able to see the theme in mapbuilder or perform spatial query. Any idea what might went wrong?
    Thanks

    I noticed the error is caused by not setting the initial map center and zoom level. Once I added the following code, the error went away.
    mapview.setCenter(MVSdoGeometry.createPoint(-122, 37,8307));
    mapview.setZoomLevel(4);
    What I don't understand, however, is why can't I use FOITheme.zoomToTheme() to replace the code above?

  • PCC-F-02044, CMD-LINE:  Illegal or out of range value for option

    Good day,
    I very new to Pro*C and its compiler, i was tasked to recompile a program from a previous developer and got stuck with the above mentioned problem.
    The command i'm using to compile the program is: proc xxx.pc
    This returns the illegal or out of range value error
    #include <iostream>
    #include <fstream>
    #include <string>
    #include <stdio.h>
    #include <sqlda.h>
    #include <sqlcpr.h>
    #include <sqlca.h>
    #include <stddef.h>
    using namespace std;
      char myfile[60];     
      char puk [][];
      int last_col = 0;
      int last_row = 0;
      int line_nr = 0;
      string line = ""; 
    int main(int argc, char *argv[])
        if (argc != 2)
           return(1);
      ifstream myfile;
      myfile.open (argv[1],ios::in);
      if (myfile.is_open())
        while (! myfile.eof() )
        //while(getline(myfile,line))
          getline (myfile,line);
          line_nr++; //counting number of lines
          line = trim(line); //remove whitespaces
          if (line == "\r" or line.length()  == 0) {
             continue;  //ignore blank lines
           if (line_nr == 1) {        
              last_col = 1;
              last_row = 0;
              puk [last_row][last_col] = line;          
           } else if (line_nr > 1 && line.substr(1,3) != 'OOF') {          
              last_col = last_col + 1;
              puk [last_row][last_col] = line;          
           } else {     
             last_row = last_row + 1;
              puk [last_row][1] = line;                    
        myfile.close();
        line_nr = 0;
      return 0;
             Any assistance will be appreciated.
    Regards,

    My pcscfg.cfg file is set as follows:
    sys_include=(/usr/include/c++/4.1.1/iostream,/usr/include/c++/4.1.1/backward/iostream.h,/usr/include/c++/4.1.1/fstream,/usr/include/c++/4.1.1/backward/fstrea
    m.h,/usr/bin/strings,/usr/include/string.h,/usr/include/strings.h,/usr/include/stdio.h,/usr/lib/syslinux/com32/include/stdio.h,/oracle/client/9.2.0/precomp/p
    ublic/sqlda.h,/oracle/client/9.2.0/precomp/public/sqlcpr.h,/oracle/client/9.2.0/precomp/public/sqlca.h,/usr/include/linux/stddef.h,/usr/lib/gcc/x86_64-redhat
    -linux/4.1.1/include/stddef.h,/usr/lib/syslinux/com32/include/stddef.h,/usr/lib/syslinux/com32/include/bitsize/stddef.h,/usr/include,/usr/lib/gcc-lib/i386-re
    dhat-linux/2.96/include,/oracle/app/oracle/client/precomp/public,/user/include/g++-3)
    ltype=short

  • Out of range...How do I know for sure?

    Installed WRT150N wireless router between DSL modem and computer. No problem doing so using setup CD that came with the router. Solid intenet connection. (Wired)
    Installed WMP300N wireless card in comp 100 feet away in another frame building. Also used setup CD that came with the card. Card seems to have installed ok. Also used Easy Link Advisor and Wireless Network Monitor - But Monitor Link Info Tab - has message...
    "Cannot Associate with the Access Point."
    Signal Strength box is blank
    Link Quality box is blank
    On Profiles Tab -
    Profile and wireless network name fields are blank ( Empty)
    "Scan" or "Connect" works but produces nothing.
    Monitor states adapter is Active; green light on back of card is blinking. (Scanning)
    It's like there is no wireless signal anywhere close!?
    I don't know what's going on. I used the main wired comp to "try and Add" the computer to the network but that didn't work either.
    I can't find a thing wrong and have spent hours reading FAQ's. Woof, no joy.
    It looks to me like the comp/wireless card is just too far away from the wireless router to pick up a signal from it or a firefly has more power in his little butt!? Beats me but it's "wireless N" technology ( touting ideal conditions of 1400 feet line of sight ) and its totally out of range at 100 feet ... between two frame buildings?
    Any ideas? I would like some sort of prize offered to the person that has actually connected with the most distance between them/their comp and the wireless router.  I know 100 feet is no joy. Anybody have a connection at 95 feet? Raise your hand! I'd like to know..I bet a lot of us would! 
    (Hey linksys, what I gotta do...Load the comp in a wagon towing an extension cord to see how close I can get to the router before the card finds a signal and connects? (Now theres an idea! Makes me wish I had a lappy.) The up side is the security...one might be able to park over this router and not get a connection. Hahaha
    ( Don't jump on me...respect your elders..I'm 60 with a tricky ticker! Not doing my blood pressure any good...)
    Ain't this supposed to be an excellent brand...You don't like "ain't", Ok...arsn't this supposed to be an excellent brand of equipment?
    Does this sound like out of range to you? Anyone?
    Thanks,
    Thu

    On router change radio band to standard, and standard channel to 11. Change advanced wireless settings : change beacon interval to 50, fragmentation threshold to 2306, RTS threshold to 2307, DTIM to 2. On computer instead of using linksys WLAN monitor, switch to windows XP's client WZC. It might connect after that.

  • When I'm out of range for Wi-Fi on iPad, can I use the Internet connection from my iPhone 5?

    I only get Internet on my iPad when I have my wireless router. When I'm out if range can I piggyback with my iPhone5? If so, how.

    Yes, you can use the hot spot feature of the iPhone 5 to create a WiF Access Point.
    See here in Chapter 33 Settings http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Importing 59.94 fps  - edl from Premiere CC  - error - Frame index out of range

    I have a Adobe Premiere project with a 5k 59.94 sequence.
    The sequence has two R3d 5K clips both interpreted at 59.94.
    I've exported an edl for the sequence and want to import it into SpeedGrade.
    I have adjusted my preferences in SpeedGrade for 59.94.
    - playback at 59.94
    - base frame rate is set at 59.94, with "both edits and footage have the current base FPS as set above or in the EDL itself"
    I import the EDL and the reels are not loaded. I select "Load from desktop", and the reels still do not load.
    I deselect "don't replace loaded reels" and manually drag the two clips and replace the two reels.
    I can now see the clips in the timeline, but have an error message in my display - "Frame index out of range".
    I'm guessing this could also a be a Premiere CC export problem, but not sure. The sequence is just cuts, no audio.
    Here's the edl info:
    TITLE: sg_test_edit
    FCM: NON-DROP FRAME
    001 A002C035 V C 17:40:23:54 17:40:38:41 00:00:00:00 00:00:14:47
    * FROM CLIP NAME: A002_C035_05094K_001.R3D
    002 A002C013 V C 16:46:38:36 16:46:52:24 00:00:14:47 00:00:28:35
    * FROM CLIP NAME: A002_C013_0509UM_001.R3D
    Trying to nail down a workflow for 4k 60p, and not feeling very encouraged.
    Any suggestions?
    Thanks

    I've had a similar frame-out-of-range problem for the last week or so in Sg ... import an edl, and even if I've already set the "base" in Prefs, and for that project BEFORE re-loading the reels, I ALWAYS get the f-o-o-r screen instead of my footage. After going back and forth setting those things to the same thing again and maybe again, I'll finally get where it all loads & runs. Save the project.
    Come back by opening it again later ... and GET THAT DAMN FRAME-OUT-OF-RANGE thing again and have to ... again ... spend 10-15 minutes setting and re-setting all those same DAMN things until it finally decides to accept my footage.
    I've only ... in the last two weeks ... TWICE opened a project I'd previously had working and graded on ... that simply loaded. Every other time I've had to waste time re-setting/re-setting/re-setting/close-open-re-set/re-setting & etc. until it finally works.
    No help from anyone about why this is now happening, how to stop it, or fix it quickly. Damn dumb behavior.
    Neil

  • The dimension of my illustrator CC is out of range, i cant make the size bigger than 577.95cm

    the dimension of my illustrator CC is out of range, i cant make the size bigger than 577.95cm, please help

    hi
    No i have been using illustrator CC version for six months, I can adjust
    the size to 1000cm above before.  Its all of a sudden like this so there
    must be something i can do.  I have been using illustrator with different
    version for more than five years , have been setting it for larger file for
    laser cutting , it was totally fine.

  • Network Access Not working - String index out of range -1

    All of our Storm handhelds are working great for network file access through the BES server.  I just got a Curve 2 and tried the same access and anything you type into the file application in the go to box gives a String index out of range -1 error.
    Any ideas or fixes that anyone knows for this one?  I will try another file manager in the meantime.

    I am unable to locate any other file manager that allows network file access through BES.  Anyone locate the reason for this error or any managers that allow network access?
    Thanks!

  • Ibook out of range

    I bought a book from ibook to read on ipad. However, I found that on the right side of each page, some of words were cut off because of out of range I guess. Also I found there are no pictures where suppose to have. Please help with this.

    If the router used as an expander of the original network
    has its own name and configuration, see if you can choose
    it so the original source is ignored. It may not want to do this
    automatically; and in some cases, it may not work at all.
    Does your configuration panel for networks give you an
    option to choose AirPort to be in the top of the list? Is it?
    You may have to be sure the correct wireless base is
    chosen and see if that setup can be adjusted to allow
    the iBook better access or power for the alleged range.
    Does the network you have set up give the computers a
    specific 195.xxx series of IP addresses behind the router
    or other different identities? Since my setup is using the
    10.xx.xx sequence, and I have Apple gear, it is a little easier
    to set them up to include using the Express as a repeater.
    Hopefully someone with general setup experience chimes in...
    Good luck & happy computing!

Maybe you are looking for