Setting color to ColumnSeries in Flex 2 ColumnChart

I have a requirement to display the data points in a
time-based ColumnChart series (where x-axis is a DateTimeAxis and
y-axis is a LinearAxis) in such a way that the bar in the chart
would be displayed in different colors depending on the y-value of
the data point representing that bar.
For example, if the y-value of a data point is less than 50
then the bar representing that data point show red color. If a data
point in the series has y-value between 51 and 80, then the bar
representing it will take Orange color, and so on...
Please help advise me a hint on how I could do that.

The error is sort of non-sensical in this case:
Error: Type was not found or was not a compile-time constant:
data. [Generated code (use -keep to save): Path:
C:\flex_sdk_2\flex_tutorials\generated\data-generated.as, Line:246,
Column: 14]
I opened up that generated file, and the line it refers to
has nothing to do with the line in the mxml file that's actually
causing the error. I read on one forum or another that when you get
these sorts of compile errors, it means there's some kind of syntax
error in the mxml that the compiler doesn't know how to
resolve.

Similar Messages

Setting Color of ColorPicker

Hi,
I feel like I am missing something obvious (checked the
LIveDocs and Googled a ton). I have a Flex-based event management
site. When adding a new event, the event owner has the option to
select their link (and link hover) colors from a standard Flex
ColorPicker. This works without any issues. However, when an event
owner is editing an existing event's details, I need to set the
color picker to show the previously selected colors, which are
pulled from a database.
Colors are stored in the database as strings in the following
format: 0xFFFFFF, 0x537189, etc. If the colors are web-safe, I have
no problem setting the selected color of the ColorPicker:
myCP.selectedColor = uint('0xFFFFFF').
If the color is not web-safe, my code falls over in that the
correct color is not set (all non-web safe colors are set to
0xFFFF00 even though they are in the DB with the proper hex value).
If I manually type in the hexadecimal color value to the
ColorPicker's text field, the color is properly displayed and sent
to the DB correctly when the form is submitted. If I reload the
application, I then see the incorrect color I mentioned above.
Stumped on this one. I've thought about loading a massive
Array of hex values and set it as the DP of the ColorPicker but
that seems like more work than should be necessary. Of course, I
could force the client(s) to use web safe colors but then they'll
just whine about how limiting 216 colors are for links :).
If anyone has some thoughts on this or a solution, I would
really appreciate it.
Thanks,
Craig

Can you provide some simplified yet "complete" sample code? I
can't repro the problem.

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

Cookie set on the request from flex disappers

All,
I need to set cookie for calls from flex. So on the server side I set the cookie and send the response back to flex. I used tools like tamperdata and debugbar to monitor the request calls and I found that the cookie i set is available + a
JSessionID cookie is also available in the response headers "
Set-Cookie".Since cookie is set on the response headers, it is expected to be available in all the next successive calls.
But on my next successive call I see only the the Jsession id for all the calls. And in some call i see the cookie I set.
I use caringorm framework. So far I have analysed and found that if the call goes from same delegate I see my cookie, but if its from different delegate then i don't see the cookie in the request. I tried using same delegate for all my commands by creating objects of the same delegate but still it didn't work.
I feel creazy when i thing why only JseesionId is available in the cookie and not the one which i set in the calls irrespective of the delegate. I am not sure where i am going wrong. Even when i try to do document.cookie in the external interface call or in the URL using Javascript alert I only see a empty string not ven the Jsession id in the document.cookie. some thing is really creazy.
Sicne result event does not have the option of cookie, is flex eating the cookie set on the response. Then why on Jsessionid is available? I have also seen that in HTTPServiceMessage has an option of recordHeaders. Is my isseu is related to this. If so please let me know an example to use this. I am going insane with this issue. Please help!!

It's probably not the same delegate you need to hit, but exactly the same HTTPService.
This is a bit I've gleaned from encountering similar issues, so it might not be exactly right!
The Flash Player attaches the cookie info into the Channel that is used to make the call. If you want the same cookie, you need to use the same Channel.
The jsessionid you are seeing is the way the same session is indicated to back end resources, so if two Flash apps hit the same service it knows they are different.
The way I'm currently playing with, is to keep the ChannelSet around and inject it into Services as I need them, that's covering most of my problems!

To set color for barchart having datetime column

Hi,
I have a datetime column in the XSD,
I was trying to set colors for the barchart through, chart expert --> colorhighlight ,here in colorhighlight when i click on new I am getting a dialogue box asking to enter datetime in M:D:YYYY H:MM:SS TT format. why is this dialogue displayed ? How to overcome this.
Regards,
Deepa V

Hi Deepa
Please inform us with the following information:
1: What is the version of Crysatl Reports that you are using?
2: What is the Chart Type that you are uisng?
3: Where are you placing this chart in the report?
Regards
Ashwini Yadav

[AS][INDCC] How to set Color Conversion field to No Color Conversion when creating PDF Export preset

How can i set Color Conversion field in Export to PDF dialog to No Color Conversion when creating PDF Export preset? i have done a bit of searching and have found where it has been recommended to set effective pdf destination profile to use no profile but it doesn't seem to be producting the expected results.

Yes, it seems that i had to make the change after creation, not while creating the preset. thank you.
tell application "Adobe InDesign CC"
     set newPreset to make new PDF export preset with properties ¬
          {name:"preset name", standards compliance:none, acrobat compatibility:acrobat 7}
     tell newPreset to set PDF color space to unchanged color space
end tell

Set color for TableCellDesign for a table in readmode.

My Requirement is dynamic assiging the Tabcelldesgin color for table column, but Table in readonly = false.
is there any possiblity of assigining the values dunamically.
Thanks in advance

Yes, i have assigned to Table column to set color dynamically for different conditions.
But color is visible, when table in read mode.
My requirement is need to set color, when table in readonly = false.
Please can any one have the solution for this>

How to set color of our specified JTable's row

i need to set color of our specified JTable's row.so send the coddings of that part.

i need to set color of our specified JTable's row.so
send the coddings of that part.I think you misunderstand how this forum works...
If you have a problem, you post your problem here with example code which demonstrates said problem...
The people here then attempt to help you if they want to.
You do not post demands for code examples

How to set color for a tabstrip in BSP

Hello all,
Can anyone please let me know how to set color for a tabstripn in BSP?
I am using the below syntax but it still gives me the default color.
<htmlb:content design="design2003" >
<htmlb:page title="test " >
    <htmlb:form>
<htmlb:tabStrip id         = "TabStrip"
                      bodyHeight = "200"
                      bodyColor = "red"
                      width      = "700" >
</htmlb:tabStrip>
</htmlb:form>
</htmlb:page>
</htmlb:content>
Thanks,
Sandeep

Hi...
The below code is working fine for me...
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title="stg " >
    <htmlb:form>
      <htmlb:tabStrip width      = "430"
                      bodyColor = "rgb(88,5,64)"
                      id         = "t1"
                      bodyHeight = "112" >
        <htmlb:tabStripItem id      = "t1"
                            index   = "1"
                            title   = "Sales"
                            tooltip = "My Tooltip for Tab 1" >
          <htmlb:textView text="Tab N 1" />
          <htmlb:tree id        = "treeReports"
                      showTitle = "true"
                      table2    = "<%= mt_nodes %>"
                      title     = "Menu"
                      width     = "100%" />
        </htmlb:tabStripItem>
        <htmlb:tabStripItem id      = "t2"
                            index   = "2"
                            title   = "Production"
                            tooltip = "My Tooltip for Tab 2" >
          <htmlb:textView text="Tab N 2" />
        </htmlb:tabStripItem>
      </htmlb:tabStrip>
    </htmlb:form>
</htmlb:page>
</htmlb:content>

Setting Color for Records in forms6i

Dear All
How can I set color for particular records on a form. i.e. Set the color of all employees whose salary is greater than 2000 to Red and All the rest to Green
Solomon

Hello,
6i is an old version and I don't remember if there is a Set_Item_Instance_Property() built-in. If yes, you can use it with a Visual Attribute that held the colors.
Francois

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8 . I am using WaveMaker application for web development

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

How set color for a ValidationTextField's hint?

I want to set color for a ValidationTextField's hint, to
implement watermark effect, how do it?

Hi...
The below code is working fine for me...
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title="stg " >
    <htmlb:form>
      <htmlb:tabStrip width      = "430"
                      bodyColor = "rgb(88,5,64)"
                      id         = "t1"
                      bodyHeight = "112" >
        <htmlb:tabStripItem id      = "t1"
                            index   = "1"
                            title   = "Sales"
                            tooltip = "My Tooltip for Tab 1" >
          <htmlb:textView text="Tab N 1" />
          <htmlb:tree id        = "treeReports"
                      showTitle = "true"
                      table2    = "<%= mt_nodes %>"
                      title     = "Menu"
                      width     = "100%" />
        </htmlb:tabStripItem>
        <htmlb:tabStripItem id      = "t2"
                            index   = "2"
                            title   = "Production"
                            tooltip = "My Tooltip for Tab 2" >
          <htmlb:textView text="Tab N 2" />
        </htmlb:tabStripItem>
      </htmlb:tabStrip>
    </htmlb:form>
</htmlb:page>
</htmlb:content>

JEditorPane set color for desired chars

How can I set color and other parameters for desired chars in JEditorPane or it's better to use some other class.
Thanks.

Read this section from the Swing tutorial on "Using Text Components" and then decide which is best for you:
http://java.sun.com/docs/books/tutorial/uiswing/components/text.html

How to set colors in cells depending the conditions in alvtree

Hi All,
Could you please provide me idea or sample program how to set colors in cells depending the conditions in alvtree.
Thanks,
Suresh

When running vim in a terminal, it will use whatever colour scheme is defined by the terminal. You should have a look at this thread:
http://bbs.archlinux.org/viewtopic.php?id=51818
Also, check the wiki article on Xdefaults.

How to set colors to table control?

Hi all,
can we set colors to tables columns and rows?? How can we acieve this? Any help please
Thanks,
Madhan.

Hi All
thanks for your replies..
data tab type IF_main_view=>Elements_segment.
data line type IF_main_view=>Element_segment.
data node_info type ref to if_wd_context_node_info.
data attribute_info type wdr_context_attribute_info.
data attr_value type WDR_CONTEXT_ATTR_VALUE.
data wd_standard_cell type ref to cl_wd_table_standard_cell.
data component like line of cl_abap_structdescr=>components.
data wd_table_column type ref to cl_wd_table_column.
node_info = lo_nd_segment->get_node_info( ).
attribute_info = node_info->get_attribute( 'CELL_DESIGN' ).
if component-name = 'SEGMENT'.
wd_standard_cell->set_cell_design( CL_WD_ABSTR_MASTER_TABLE_COL=>E_CELL_DESIGN-BADVALUE_MEDIUM ).
endif.
i am trying to set color for some colomns, but i am not getting any colors??? anything wrong in this.. please help
thanks,
Madhan.

Setting color to ColumnSeries in Flex 2 ColumnChart

Similar Messages

Maybe you are looking for