Setting defaults at Responsibilty level

Hi,
Can we set the default values to the attributes at different levels say site level,responsibility level.
Regards
Ashwini

Ashwini,
If a bean is defaulted to a value through code, then the personalization defaulting will not work.
--Shiv

Similar Messages

Changing OSX default volume setting to a higher level in sound preferences

When I change the default volume setting to a higher level in sound preferences within OSX, it is back at the lower level at the next listening session the following time I use iTunes on my Mac Mini. Within System Preferences there is a section that lets you "choose a device for sound output" but the only choice I have is "line-out" and under the "port" heading there is only "built-in output"--no other choices are shown. I have external speakers attached which I like to use for listening to music as I work. What is the problem? Why won't the higher volume I set remain? Also, shouldn't more than one choice be shown for sound output?

This sounds like the problem that I'm experiencing and <a href-"http://discussions.apple.com/message.jspa?messageID=2694517#2694517">aske d about a couple of days ago. The sound level resets to 50% after shutdown.
I tried setting the levels in Audio MIDI Set Up as suggested above, but that hasn't changed anything.
In answer to B_web, I am running my external speakers through the headphone jack.
So, any other suggestions?

Hierarchy Viewer: Setting default zoom level and levelFetchSize

I have couple of questions on Hierarchy Viewer:
(1) Is it possible to set the zoom level to say 50% by default when the HV is rendered first time. By default the nodes are rendered at 100%, but I would like to render them at 50% by default - and on hover show the 100%. Is this doable ? User can then decide to zoom to 100% if desired.
(2) Is it possible to change the levelFetchSize based on zoom level ? For example if the zoom level is 100%, levelFetchSize could be 4 but at 50%, it would be increased to 8 (since more real estate is available) ?

It seems like the DVT by default zooms to fit the available real estate. But is it possible to set a fixed zoom level (say 75%) even if the node does have 100% zoom level. We would like to show the 100% zoom level only on hover to the node. But by default, wanted to to set the viewer to always show 75% or 50% zoom level.

Setting default zoom level for creating bookmarks

I am creating a PDF file in a couple of steps. The main text is created from Word, which gives me bookmarks automatically set to "Inherit Zoom." I also create subsets of tables and figures by "combining files in Acrobat" from Windows Explorer. That step creates bookmarks automatically that are set to "Fit Width." I then add the pages from the tables and figures into the PDF created from the Word document. The bookmarks come in the proper location, but the zoom level stays "Fit Width." I'd like it to be either "Inherit Zoom" or "Fit Page." Is there a way to set the default zoom for bookmark creation so I don't have to manually change each bookmark?

It seems like the DVT by default zooms to fit the available real estate. But is it possible to set a fixed zoom level (say 75%) even if the node does have 100% zoom level. We would like to show the 100% zoom level only on hover to the node. But by default, wanted to to set the viewer to always show 75% or 50% zoom level.

Any opinions on setting default values on Business Partner level?

Hi All,
I do not have a question, but would like to have a good discussion on how you should preferably be setting default values on a business partner and it's assignment blocks.
In my opinion you have two main alternatives:
1. The "old fashioned" way by using the get_<attribute_name> method and doing some checks for the perticular attribute in the context node.
2. Using the Badi BADI_CRM_BP_UIU_DEFAULTS to fill fields with a default value. With some enhancements on the assignment blocks (making typed_context attribute public and, when not called yet, calling the badi) you can use the badi for all assignment blocks.
Because I discovered via debugging that in the, by many forums suggested, badi code a programm error/exception is used so that the default values are only set during creation mode, I started doubting to use the badi. Because once I had set my data declarations to the right references and the exception did not occur anymore, suddenly it always fills the values even when there are already values filled. So additional checks are needed to assure that I am in creation mode.
Although I like the use of the badi, because all my default values on the whole business partner object can be found in the same place, it is getting a bit strange to: first still enhance the view and context node class, adjust the visibility of the typed_context, call the badi and do all kind of checks to assure that you are in the right view/context node, where this all is faster and more lean and mean when done directly in the get_<attribute_name> method on a context node.
Anyone who wants to give there opinion on this?
Regards,
Martijn.

Cameron,
Unfortunately you cannot pass the Account and Contact name before saving the record. Post default tries to capture the name just before the record gets saved, but as the record is yet to be created, the relationship wont exist and only the respective id fields will have values. If you try using account id/ contact id it will work else just pass the time stamp in the name field which will make sure there is some value when the record is saved. later in the back end you might need WS to update the field values.

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

Setting Default Dashboard based on Groups/users in OBIEE 10g

Hi,
I am having a requirement and facing some issues with setting a default dashboard option to the users who ever access the application. Below is the brief description of entire requirement.
The main requirement is to integrate OBIEE into a .net and silver light application. We will be having a 3 links in the .net application , which in turn displays the OBIEE reports and dashboards upon clicking the 3 links.
We are using the concept of Init blocks, session variables and Go URL from an OBIEE standpoint for accomplishing this integration requirement. We have also configured LDAP server in OBIEE.
The issue we are facing is out of the 3 links in .net application, we have one link/icon called dashboard icon which should display bunch of OBIEE dashboard pages in the form of 4 tabs but currently it is showing the My Dashboard home page. For this to achieve to set default dashboard page is to go to My account and change the default dashboard to the desired dashboard and log out and log in back to the application and we will be all set with dashboard pages being displayed upon lcking the dashboard icon but this is manual process for each user as they need to login into the .net application and change the setting s in My Account manually to change the default dashboard setting to the desired one.
How should I make sure, whoever is logging into the Application (every user) should be able to see the default dashboard pages without changing the options manually by going to My Account.
The LDAP server is taking care of the Authentication part of the users as every user record is maintained in Active directory which in turn is part of LDAP server.
To brief high level requirement on single statement is  how to make a default dashboard pages to users based on group in OBIEE. Is there any option in OBIEE, where we can change or set a default dashboard to particular group in OBIEE either in RPD or UI level.
Appreciate your help on this.
Let me know if anyone needs any more information in this regard.
Thank
Praveen

You can set 'PORTALPATH'. Have a look at these threads below:
how to get default dashboards when users logs in
Re: PORTALPATH for Each Group
- Bharath

How to Set the Transaction Isolation Level in WebLogic?

Is there a way to set the transaction isolation level in WebLogic 9.2 or WebLogic 10?
For an example say, we have an application which is supported for several database platforms. Without setting the transaction isolation level in DBMS level, is there a way to specify this in WebLogic to make it common for all the DBMS type?
And I found a way to change the transaction isolation level in WebSphere application server using a property called webSphereDefaultIsolationLevel.
[url http://www-1.ibm.com/support/docview.wss?rs=180&uid=swg21224492]http://www-1.ibm.com/support/docview.wss?rs=180&uid=swg21224492
Is there a way to do the same thing in WebLogic application server 9.2 or 10?

Anuradha W wrote:
That means, currently the only way tospecify the transaction level is through
weblogic-ejb-jar.xml deployment descriptor?
for WLS-generated code, yes.Somewhat related to this question, we have written a standalone testcase to reproduce this issue we have been having. Basically, the issue is that even though we configure the isolation level to a non-default one in the deployment descriptor, the connections returned by the datasource seem to be having the default (which is Read Committed). The DBMS is DB2.
weblogic-ejb-jar.xml has the following set:
<isolation-level>TransactionRepeatableRead</isolation-level>
And we printed the isolation level of the connection returned from a method in the EJB, but the isolation level is still the default. I can share the code to reproduce the problem if you want to take a look at it. Please let me know how I can get that across to you.
Thanks,
AnuradhaIf you are using our JDBC driver for DB2, or can switch to it,
just for a test, there is some debug I'd like from you.
Joe

Setting default values for item in opportunity mgmt(crmd_bus2000111)

Hi All,
I need to set default values for the field Fiscal Quarter in item level using BADI CRM_CUSTOMER_I_BADI .This Field is created using EEW. The default value is like if the date is nov-2007 the value for this fiscal period is FQ4-2007 .
Any clue would be great help..

Why don't you try setting the default value in the List next to the Matrix - item 107
Item 107 is a matrix (a transposed one), I have no idea what list you mean... I am using item 107, not 112. Item 112 is used only to detect a click on the "Add Record" button, which is the last row of the matrix 112.
I don't see the gender column in the grid and I'm also unsure of the id you have for it "12" - are you sure it's correct ( i usually use Item("columnName") )?
Sorry for the confusion. "12" is the name of the standard column "Password" which we have renamed to store the gender.
Anton

Setting Default Values in Search Criteria for COSTCENTER

Hi ALL,
I need Help for setting default values in search criteria for COST CENTER.
Basically the issue is when creating a Shopping Cart, i need to assign a COST CENTER at Item level under COST ASSIGNMENT Tab.
While searching the cost center i need to default the following fields in my search criteria based on the Login User :
1. Controlling Area,
2. Language Key.
Please suggest some solution.
Thanks & Best Regards,
Surya

Hi Vani,
Sorry for the delay reply and Thanks a Lot for your timely support......I would like confirm once again is the name of the BADI is <b>bbp_f4_read_on_exit</b> or <b>bbp_f4_read_on_entry</b>. In this BADI i've not found a method to default Controlling Area. Can you please suggest me which method i can use.
Thanks & Regards,
Surya

MASTER DETAIL - SET DEFAULT VALUES FOR ITEMS

I have a master detail page where on the master I do things like updating the entered_by and entered_date fields
by applying functions to set the item level details and the setting them to read only.
On the detail portion of the page I'd like to do the same but I don't see the details items on the page - only the master items.
The details portion is for comments so I'd like to have the commenter_name and commenter_date set to defined values
when I hit the add row button on the details portion.
Where are the detail items?
I'm using APEX 3.2
Thanks
Steve

Hi,
When you use master detail form, APEX generate 'Detail portion' as report. So if you edit the page, you may not see actual items for 'detail portion'.
If you want to set any default values or want to format these items, you may need to do as follows
1> Edit 'report' of 'detail portion'
2> Click on report attributes
3> Click on column, you want to set default values
4> Now here, Under 'Tabular Form Element' section you can do this by setting proper values to 'default type' and 'default' fields.
Hope it helps
Cheers
Hari

The default priority setting in Mail is set to "normal" and is causing emails I send to be sent with red priority flag. How can I set default priority to low = no flag?

The default priority setting in Mail is set to "normal" and is causing emails I send to be sent with red priority flag.
I have found the flags to reduce the priorty level manually to "low Priorty", but how can I set default priority to low = no flag?
Thank you for advising,

Try deleting the .plist.
Quit the application.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.mail.plist. Move the .plist to your desktop.
Open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

Default transaction isolation level

Hi,
What is the default transaction isolation level in weblogic?
Is it dependent on the database isolation level?
Pradeep bhat

In 6.1, the default transaction isolation level for CMP beans is the level specified
in the database.
In 5.1, the default is supposed to be serializable, though there is a bug in 5.1
that does not set the level at all. I have received a confirmation from Weblogic
that this is a bug.
Dan
"pradeep bhat" <[email protected]> wrote:
>
Hi,
What is the default transaction isolation level in weblogic?
Is it dependent on the database isolation level?
Pradeep bhat

Setting default values at the start of a process

Hello
I need to set some constant values to the attributes in data object as soon as start event of a process is triggered.
How can I do that?
Regards
Vidyadhar

Vidyadhar,
Follow the below procedure to set Default Values
1.Right Click on Start Event select Properties
->Goto Output Mapping Tab
->Double Click on Element on which you want to give Static Value
and enter the value with double codes for eg: "Name"
Make sure that this element value should be has a Input to the next level.
Thanks
Srikanth

G6: Setting default metadata values

Hello all!I am trying to find a way to set default metadata values in plumtree.
For example, if I created a Web Content Crawler to scan MarchofDimes.com, which has various career postings, I would like to be able to default or force these crawled content items to have a category field of "Job Postings".
It appears that at the "Content Type" object level, you can set a default value. However I don't want to set "Job Postings" as the category for all imported web content, only those imported through this particular crawler.
I tried to create a new Content Type called "Web Content - Job Postings" but I chickend out when it got down to setting a new identifier to map to the Content Type. I wasn't sure how that would be accepted in the Global Content Mime/File Type Map Utility if there were duplicate identifiers.
Apart from going into each crawled document and setting the category field manually, does anyone have a recommendation on how this can be done?Thanks!Geoff!
While I have your attention, in the Global Document Property Map, how can I identify the various Document Attributes?

Hello all!I am trying to find a way to set default metadata values in plumtree.
For example, if I created a Web Content Crawler to scan MarchofDimes.com, which has various career postings, I would like to be able to default or force these crawled content items to have a category field of "Job Postings".
It appears that at the "Content Type" object level, you can set a default value. However I don't want to set "Job Postings" as the category for all imported web content, only those imported through this particular crawler.
I tried to create a new Content Type called "Web Content - Job Postings" but I chickend out when it got down to setting a new identifier to map to the Content Type. I wasn't sure how that would be accepted in the Global Content Mime/File Type Map Utility if there were duplicate identifiers.
Apart from going into each crawled document and setting the category field manually, does anyone have a recommendation on how this can be done?Thanks!Geoff!
While I have your attention, in the Global Document Property Map, how can I identify the various Document Attributes?

Setting defaults at Responsibilty level

Similar Messages

Maybe you are looking for