Setting image dpi size of tiff Image
Can anyone suggest me a method for setting the size of tiff image to 300 dpi.
I got the following code
http://markmail.org/download.xqy?id=lljtrh4jtsowwlok&number=1
But the image dpi size remains the same after this
Edited by: Priya on Dec 29, 2008 10:58 AM
Why do you think the dpi remains the same after using the code in the link?
Any given printer dosen't necessarily have to honor the dpi setting in an image format. In fact, usually the image viewer used to print the image takes control of the physical size of the image.
Similar Messages
-
Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB
Hi Ciaran19,
Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
Best,
Sara -
How do I set a dpi for an exported image?
I have an illustrator file that needs to be set up for print. The publication requested an image that is x" by x", 300dpi to satisfy a 150 line screen. I generally work exclusively for the web, so this is all somewhat new to me.
Because illustrator is a vector program I obviously can't set dpi on an *.ai file. So this lead me to looking for a dpi option when saving or exporting a raster file. I have had no luck with this. So I have come here hoping someone can point me in the right direction.
So how do I set a specific dpi for a raster image created in illustrator?
Would I just multiply the inch dimensions by 300 and use that as a pixel dimension?Honestly, I'm not sure I understand what point you're trying to make now. It doesn't seem relevant to the original question about exporting an image from Illustrator.
It's not, I added a second question here:
Also, how does illustrator determine the pixel value of an inch if I can't set a ppi? For instance, if I set up a 1in wide file it will be 72px wide.
Well, the scale-ability of a vector graphic doesn't put it in a permanent state of ongoing change. If it's just sitting there and it measures 1 inch wide, then it's one inch wide. If you scale it to 2 inches wide, then it's 2 inches wide. If Illustrator's Info panel says it's 2 inches wide and I print it at 100%, it will be 2 inches wide on paper without fail. It couldn't make more sense.
Exactly. So if Illustrator is setting the resulting image to 2in and a vector element set to a width of 1px is 1/72" then how can this:
"Pixel value of an inch..." doesn't apply to the artboard.
be true?
I can't reproduce that here. What document profile are you using? I get accurate sizing of placed images whether I use Print or Web. I didn't try the others.
I am using the print profile with width and height both at 1in. Nothing else is altered. -
JAI(Java Advanced Imaging) Problem with splitting TIFF images
Hi
I am getting problem with height when I use this program to split TIFF images
ImageDecoder decImage = ImageCodec.createImageDecoder("tiff", inStr,
null);
Then it creates RenderedImage page by page and encodes them to file:
String outFileName = "";
OutputStream outStr;
TIFFEncodeParam encParam = new TIFFEncodeParam();
encParam.setCompression(TIFFEncodeParam.COMPRESSION_PACKBITS);
for (int i=0,n=this.getPageCount(); i < n; i++)
outImage = this.decImage.decodeAsRenderedImage(i);
outFileName = "C:\\Temp\\Split" + i + ".tif";
outStr = new FileOutputStream(outFileName);
BufferedOutputStream bOutStr = new BufferedOutputStream(outStr);
encImage = ImageCodec.createImageEncoder("tiff",bOutStr,encParam);
encImage.encode(outImage);
bOutStr.flush();
bOutStr.close();
}The images are shrinking when I split . I need a solution to this problem.
Thanks for any help in advance
Sudheer.Hi
Did you get a solution for your problem. I am also trying to split a TIFF file.
Thanks in advance
Antony -
Restrict image pixel size in multiple image upload
Re: Multiple Image Upload behaviour.
One of the only issues I have with this extension is if users try to upload an image within the limits I set (of 250Kb) but with a high pixel count.
For example, a jpg of 800 x 600 at 200Kb causes no problem, but a one of 2000 pixels at 150Kb probably will.
I understand that there is probably more server load to resize a large pixel image, so is there a way to check the pixel size of images to be uploaded as well as the file size and reject it if it is too large?But what you could do, is retrieving the php.ini´s "post_max_size" value and display a note to your site visitors:
<br />
<br />
<b>1.</b> put this into the doc´s head:
<br />
<br /><?php<br />$replace_max_size_MB = str_replace("M"," MB",ini_get('post_max_size'));<br />?>
<br />
<br />
<b>2.</b> the related message:
<br />
<br />Pics larger than <?php echo $replace_max_size_MB; ?> will be rejected by the server
<br />
<br />Cheers,
<br />Günter Schenk
<br />Adobe Community Expert, Dreamweaver -
Multiple jpeg image to single tiff image
hi all
i am doing a project in java where i need to convert 10 jpeg images into a single tiff image..conversion of single jpeg image to single tiff is happening but embedding all the 10 jpeg images into a single tiff is not happening..i hav tried out with single image conversion..
My code is
import java.awt.image.BufferedImage;
import java.io.File;
import java.io.IOException;
import javax.imageio.ImageIO;
public class Convert
public static void main(String[] args)
File in = new File("b.jpeg");
File out = new File("b.tiff");
BufferedImage bufi;
try
bufi = ImageIO.read(in);
ImageIO.write(bufi, "tiff", out);
catch (IOException ex)
ex.printStackTrace();
can anyone pls help me how to do that
thanx in advance
Edited by: mnd on 3 May, 2008 7:18 PMMake a Buffered Image large enough to handle the size of the final image... say you have 10 jpegs each 100x100, and you want them in a configuration with 5x2... 500x200.
Once you have the images loaded and the new BufferedImage, just paint them into the appropriate (x, y) value of the graphics context of the image.
g.drawImage(image1, 0, 0, null);
g.drawImage(image2, 100, 0, null);
g.drawImage(image3, 300, 0, null);
. -
Please help me.
How to set DPI of TIFF image using Java/JAI?jr,
The size in pixels in the document will be the size of the image at 72 PPI when Saved for Web. Remember to tick Anti-Aliasing in the Image Size window, and place the artwork (borders) to correspond to whole pixels. -
Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?
The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be. -
Do you know if it's possible on an iPad to set the image quality/size or do we just have the one size - the photos I've taken, work out at approx 8 x 6cm @300ppi - not that big!
8cm * (1 in/2.54cm) * 300 dpi = 944 pixels (should be 1280 if this is the back camera)
6cm * (1in/2.54cm) * 300 dpi = 708 pixels (should be 720 if this is the back camera)
The back camera on iPad 2 is 1280x720 = 0.92Mp. No way to increase that. -
I read images which are 300 DPI . I get it in BufferedReader, and do some pixel manipulation. When I save those pics as PNG or JPEG the image DPI becomes 72 DPI. There should be a way to set image DPI when converting from Bufferedeader to .pgn or .jpg file.
I need to know how to set DPI to 400 without destroying the image data or pixel height and width. I know of two places within the header of a jpeg that this can be set a third I can see through debug information in metadata but cannot set. Why is this so difficult to manipulate?
-
Set Window Size when opening Image from Photo Gallery
Is it possible in XML to set a window size (height and
width)?
My code for the Image Gallery is below, and I can't figure
out a way to set the window size.Hi EJToll,
If you like to set the default file format of the file you Edit in Photoshop CC thorugh Lightroom then perform following steps.
Lanuch Lightroom and go to Edit> Preference(Windows) Lightroom>Peference(Mac)
Click "External Editing" tab
Change the option for "File Format" to PSD as deafult format for Edit In Adobe Photoshop CC
Click "Ok" button
Hope this helps.
Regards,
Sumit Singh -
How can I set the size of an image in java?
How can I set the size of an image in java? I have to choose the width and height of image...thanks to everybody...sorry for my english :-)
Hi 43477
Can you provide more details, do you want to setsize to display an image on a screen of when saving image etc?
PS.
There is a good invention called googlegoogle is good, but sometimes it's better to use more specific search, there is a search field avove on this page :) -
How to control the pixcel size in given tiff image
Hai
I loaded tiff image into the Frame by using the jai_core.jar and jai_codec.jar files. I am unable to control the pixcel size. It displaied default size. How to restract the pixcel on the image in Frame.
import java.io.File;
import java.io.IOException;
import java.awt.Frame;
import java.awt.image.RenderedImage;
import javax.media.jai.widget.ScrollingImagePanel;
import javax.media.jai.ImageLayout;
import javax.media.jai.NullOpImage;
import javax.media.jai.OpImage;
import com.sun.media.jai.codec.SeekableStream;
import com.sun.media.jai.codec.FileSeekableStream;
import com.sun.media.jai.codec.TIFFDecodeParam;
import com.sun.media.jai.codec.ImageDecoder;
import com.sun.media.jai.codec.ImageCodec;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.imageio.ImageReadParam.*;
class MultiPageRead extends JFrame
ScrollingImagePanel panel;
// JFrame mainFrame = new JFrame();
Container c;
public MultiPageRead(String filename) throws IOException
getContentPane();
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
pack();
setTitle("Multi page TIFF Reader");
setSize(980,1200);
getContentPane();
File file = new File(filename);
SeekableStream s = new FileSeekableStream(file);
TIFFDecodeParam param = null;
ImageDecoder dec = ImageCodec.createImageDecoder("tiff", s, param);
System.out.println("Number of images in this TIFF: " + dec.getNumPages());
ImageLayout size = new ImageLayout(,0,12,12);
// Which of the multiple images in the TIFF file do we want to load
// 0 refers to the first, 1 to the second and so on.
int imageToLoad = 0;
RenderedImage op = new NullOpImage(dec.decodeAsRenderedImage(imageToLoad), null,
OpImage.OP_IO_BOUND,
size);
// Display the original in a 800x800 scrolling window
panel = new ScrollingImagePanel(op, 100, 200);
getContentPane().add(panel);
public static void main(String [] args)
String filename = args[0];
try {System.out.println("jfdfldjfldfjldjfjldjfjdjdjdjjdjdj");
MultiPageRead window = new MultiPageRead(filename);
window.pack();
window.show();
catch (java.io.IOException ioe)
System.out.println(ioe);
regards
jaggayyaChanging the fonts in Print using ABAP is not possible. as basic report output is a text editor.
By changing "Customizing of Local Layout" will only change in display screen and not in print.
One possible way to create a new printer formatr thry SPAD and use that format in while printing.
to know more details about SPAD
Using SPAD - SAP Spool Administration to print different paper size
The SAP spool system manages its own output devices. This includes mostly printers, but also fax and archiving devices. In order for you to use output devices defined in your operating system from the SAP System, you must define these devices in the SAP spool system.
Print to a dot matrix printer using computer paper with 66 lines
Define paper types
Formatting process Z_60_135
Page format DINA4
Orientation tick both Portrait and Orientation
Type in the comment and click save
Device initialization
Device type - OKI341
Formatting process Z_60_135 then click Execute
Double click Printer initilization
You must key the 66 lines hexadecimals for your printer. ( line no 9)
1 # oki341 x_paper
2 # reset
3 # \e\0x40
4 # select codepage multilingual 850
5 \e\0x52\0x1a
6 # disable skip perforation mode
7 \e\0x4f
8 # select 6 lpi
9 \e\0x32
10 # select page length 66 lines (66=hex $42)
11 \e\0x43\0x42
12 # select 10 cpi font
13 \e\0x60
CHECK THIS LINKS
http://help.sap.com/saphelp_nw04s/helpdata/en/df/abbb3f8e236d3fe10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/4df93bad37f87ae10000000a114084/content.htm
http://www.geocities.com/SiliconValley/Grid/4858/sap/Basis/printprobs_solutions.htm
Hope this helps you
Regards
Pavan -
What is image dpi after "Reduce Image File Size"
Does anyone know the resulting image dpi after using the "Reduce Image File Size" command in pages? My mother is trying to prepare some things for pre-press, and can't send her document to the printing press, because the pages docs are friggin huge! I'm trying to give her the easiest option for resizing all of the many images in the document, but don't know if this is a viable option if the end product needs to be printed. I need the output to be at least 300dpi.
As fruhulda wrote, asking Pages to apply changes to the pictures isn't the good path.
In fact, it's a perfect way to get a fat file.
My practice is :
Prepare the document in Pages to define the wanted size of every embedded pictures.
Edit the picture files in a tool dedicated to this task so that the resulting files will be 300 dpis ones for the wanted sizes.
Then, replace the original pictures by the definitive ones.
In most cases, the file will be lighter than the original one and you will have the 300 dpis resolution (except if you apply shadows but it's an other story).
Yvan KOENIG (VALLAURIS, France) lundi 20 décembre 2010 19:36:56 -
Ho Guys,
I am looking for a code example to change Tiff Image DPI from 200 to 300.
Any suggestion is greatly appreciated.You need to look for algorithms on scaling images. On such example is here:
http://www.rgagnon.com/javadetails/java-0243.html
Maybe you are looking for
-
How to get updated and recently created events from google calendar in pl/s
Hello I am able to get Google calendar events using pl/sql..I am receiving huge xml code(if there are more events),want only update and recently created events instead of getting repeated events.please help me in this regard. Thanks
-
Okay so . . . just bought a new Mac OS X because my last MacBook Pro burned up. I was luckily able to put everything on an external hard drive. But when I try to play my movies from the hard drive or any other DVD that were downloads that are AVI
-
Major Mail Crash with iOS 6 and iPad 2... now a blank Mail screen
I just had a major Mail app crash with iOS 6 on my iPad 2. I was composing an email with pictures in it and when I got to the point of pasting the forth picture into the email, the Apple Mail app started to get very sluggish and crashed. Now, every
-
SELECT,UPDATE, DELETE With JDBC Adaptor
Dear All, I need to execute few Select, update and Delete statement by using JDBC Adaptor. Suppose While select statement no records selected. During Update no records exsist with specified key so no update possible. During delete if no record found
-
Whenever I shutdown iTunes on my computer, it keeps re-opening and I have to go to Task Manager and end the process in order for it to shutdown.